Bacterial susceptibility and resistance to modelin-5.

Modelin-5 (M5-NH2) killed Pseudomonas aeruginosa with a minimum lethal concentration (MLC) of 5.86 µM and strongly bound its cytoplasmic membrane (CM) with a Kd of 23.5 µM. The peptide adopted high levels of amphiphilic α-helical structure (75.0%) and penetrated the CM hydrophobic core (8.0 mN m-1). This insertion destabilised CM structure via increased lipid packing and decreased fluidity (ΔGmix < 0), which promoted high levels of lysis (84.1%) and P. aeruginosa cell death. M5-NH2 showed a very strong affinity (Kd = 3.5 µM) and very high levels of amphiphilic α-helical structure with cardiolipin membranes (96.0%,) which primarily drove the peptide's membranolytic action against P. aeruginosa. In contrast, M5-NH2 killed Staphylococcus aureus with an MLC of 147.6 µM and weakly bound its CM with a Kd of 117.6 µM, The peptide adopted low levels of amphiphilic α-helical structure (35.0%) and only penetrated the upper regions of the CM (3.3 mN m-1). This insertion stabilised CM structure via decreased lipid packing and increased fluidity (ΔGmix > 0) and promoted only low levels of lysis (24.3%). The insertion and lysis of the S. aureus CM by M5-NH2 showed a strong negative correlation with its lysyl phosphatidylglycerol (Lys-PG) content (R2 > 0.98). In combination, these data suggested that Lys-PG mediated mechanisms inhibited the membranolytic action of M5-NH2 against S. aureus, thereby rendering the organism resistant to the peptide. These results are discussed in relation to structure/function relationships of M5-NH2 and CM lipids that underpin bacterial susceptibility and resistance to the peptide.

Temporin B Forms Hetero-Oligomers with Temporin L, Modifies Its Membrane Activity, and Increases the Cooperativity of Its Antibacterial Pharmacodynamic Profile.

The pharmacodynamic profile of antimicrobial peptides (AMPs) and their in vivo synergy are two factors that are thought to restrict resistance evolution and ensure their conservation. The frog Rana temporaria secretes a family of closely related AMPs, temporins A-L, as an effective chemical dermal defense. The antibacterial potency of temporin L has been shown to increase synergistically in combination with both temporins B and A, but this is modest. Here we show that the less potent temporin B enhances the cooperativity of the in vitro antibacterial activity of the more potent temporin L against EMRSA-15 and that this may be associated with an altered interaction with the bacterial plasma membrane, a feature critical for the antibacterial activity of most AMPs. Addition of buforin II, a histone H2A fragment, can further increase the cooperativity. Molecular dynamics simulations indicate temporins B and L readily form hetero-oligomers in models of Gram-positive bacterial plasma membranes. Patch-clamp studies show transmembrane ion conductance is triggered with lower amounts of both peptides and more quickly when used in combination, but conductance is of a lower amplitude and pores are smaller. Temporin B may therefore act by forming temporin L/B hetero-oligomers that are more effective than temporin L homo-oligomers at bacterial killing and/or by reducing the probability of the latter forming until a threshold concentration is reached. Exploration of the mechanism of synergy between AMPs isolated from the same organism may therefore yield antibiotic combinations with advantageous pharmacodynamic properties.

Linearized esculentin-2EM shows pH dependent antibacterial activity with an alkaline optimum.

Here the hypothesis that linearized esculentin 2EM (E2EM-lin) from Glandirana emeljanovi possesses pH dependent activity is investigated. The peptide showed weak activity against Gram-negative bacteria (MLCs ≥ 75.0 µM) but potent efficacy towards Gram-positive bacteria (MLCs ≤ 6.25 µM). E2EM-lin adopted an α-helical structure in the presence of bacterial membranes that increased as pH was increased from 6 to 8 (↑ 15.5-26.9%), whilst similar increases in pH enhanced the ability of the peptide to penetrate (↑ 2.3-5.1 mN m-1) and lyse (↑ 15.1-32.5%) these membranes. Theoretical analysis predicted that this membranolytic mechanism involved a tilted segment, that increased along the α-helical long axis of E2EM-lin (1-23) in the N → C direction, with - < µH > increasing overall from circa - 0.8 to - 0.3. In combination, these data showed that E2EM-lin killed bacteria via novel mechanisms that were enhanced by alkaline conditions and involved the formation of tilted and membranolytic, α-helical structure. The preference of E2EM-lin for Gram-positive bacteria over Gram-negative organisms was primarily driven by the superior ability of phosphatidylglycerol to induce α-helical structure in the peptide as compared to phosphatidylethanolamine. These data were used to generate a novel pore-forming model for the membranolytic activity of E2EM-lin, which would appear to be the first, major reported instance of pH dependent AMPs with alkaline optima using tilted structure to drive a pore-forming process. It is proposed that E2EM-lin has the potential for development to serve purposes ranging from therapeutic usage, such as chronic wound disinfection, to food preservation by killing food spoilage organisms.

Biophysical investigation into the antibacterial action of modelin-5-NH2.

Modelin-5-CONH2 (M5-NH2) is a synthetic antimicrobial peptide, which was found to show potent activity against Bacillus subtilis (minimum lethal concentration = 8.47 µM) and to bind strongly to membranes of the organism (Kd = 10.44 µM). The peptide adopted high levels of amphiphilic α-helical structure in the presence of these membranes (>50%), which led to high levels of insertion (Δπ ≥ 8.0 mN m-1). M5-NH2 showed high affinity for anionic lipid (Kd = 7.46 µM) and zwitterionic lipid (Kd = 14.7 µM), which drove insertion into membranes formed from these lipids (Δπ = 11.5 and 3.5 mN m-1, respectively). Neutron diffraction studies showed that M5-NH2 inserted into B. subtilis membranes with its N-terminal residue, L16, located 5.5 Å from the membrane centre, in the acyl chain region of these membranes, and promoted a reduction in membrane thickness of circa 1.8 Å or 5% of membrane width. Insertion into B. subtilis membranes by the peptide also promoted other effects associated with membrane thinning, including increases in membrane surface area (Cs-1 decreases) and fluidity (ΔGmix > 0 to ΔGmix < 0). Membrane insertion and thinning by M5-NH2 induced high levels of lysis (>55%), and it is speculated that the antibacterial action of the peptide may involve the toroidal pore, carpet or tilted-type mechanism of membrane permeabilization.

Ethanol-based proliposome delivery systems of paclitaxel for in vitro application against brain cancer cells.

In this study the anticancer activity of paclitaxel-loaded nano-liposomes on glioma cell lines was investigated. Soya phosphatidylcholine:cholesterol (SPC:Chol), hydrogenated soya phosphatidylcholine:cholesterol (HSPC:Chol) or dipalmitoylphosphatidylcholine:cholesterol (DPPC:Chol) in 1:1 mole ratio were used to prepare ethanol-based proliposomes. Following hydration of proliposomes, the size of resulting vesicles was subsequently reduced to nanometer scale via probe-sonication. The resulting formulations were characterized in terms of size, zeta potential and morphology of the vesicles, and entrapment efficiency of paclitaxel (PX) as well as the final pH of the preparations. DPPC-liposomes entrapped 35-92% of PX compared to 27-74% and 25-60% entrapped by liposomes made from SPC and HSPC formulations respectively, depending on drug concentration. The entrapment efficiency of liposomes was dependent on the lipid bilayer properties and ability of PX to modify surface charge of the vesicles. In vitro cytotoxicity studies revealed that PX-liposome formulations were more selective at inhibiting the malignant cells. The cytotoxicity of PX-liposomes was dependent on their drug-entrapment efficiency. This study has shown PX-liposomes generated from proliposomes have selective activity against glioma cell lines, and the synthetic DPPC phospholipid was most suitable for maximized drug entrapment and highest activity against the malignant cells in vitro.

Low pH Enhances the Action of Maximin H5 against Staphylococcus aureus and Helps Mediate Lysylated Phosphatidylglycerol-Induced Resistance.

Maximin H5 (MH5) is an amphibian antimicrobial peptide specifically targeting Staphylococcus aureus. At pH 6, the peptide showed an improved ability to penetrate (ΔΠ = 6.2 mN m(-1)) and lyse (lysis = 48%) Staphylococcus aureus membrane mimics, which incorporated physiological levels of lysylated phosphatidylglycerol (Lys-PG, 60%), compared to that at pH 7 (ΔΠ = 5.6 mN m(-1) and lysis = 40% at pH 7) where levels of Lys-PG are lower (40%). The peptide therefore appears to have optimal function at pH levels known to be optimal for the organism's growth. MH5 killed S. aureus (minimum inhibitory concentration of 90 µM) via membranolytic mechanisms that involved the stabilization of α-helical structure (approximately 45-50%) and showed similarities to the "Carpet" mechanism based on its ability to increase the rigidity (Cs(-1) = 109.94 mN m(-1)) and thermodynamic stability (ΔGmix = -3.0) of physiologically relevant S. aureus membrane mimics at pH 6. On the basis of theoretical analysis, this mechanism might involve the use of a tilted peptide structure, and efficacy was noted to vary inversely with the Lys-PG content of S. aureus membrane mimics for each pH studied (R(2) ∼ 0.97), which led to the suggestion that under biologically relevant conditions, low pH helps mediate Lys-PG-induced resistance in S. aureus to MH5 antibacterial action. The peptide showed a lack of hemolytic activity (<2% hemolysis) and merits further investigation as a potential template for development as an antistaphylococcal agent in medically and biotechnically relevant areas.

The role of C-terminal amidation in the membrane interactions of the anionic antimicrobial peptide, maximin H5.

Maximin H5 is an anionic antimicrobial peptide from amphibians, which carries a C-terminal amide moiety, and was found to be moderately haemolytic (20%). The α-helicity of the peptide was 42% in the presence of lipid mimics of erythrocyte membranes and was found able to penetrate (10.8 mN m(-1)) and lyse these model membranes (64 %). In contrast, the deaminated peptide exhibited lower levels of haemolysis (12%) and α-helicity (16%) along with a reduced ability to penetrate (7.8 m Nm(-1)) and lyse (55%) lipid mimics of erythrocyte membranes. Taken with molecular dynamic simulations and theoretical analysis, these data suggest that native maximin H5 primarily exerts its haemolytic action via the formation of an oblique orientated α-helical structure and tilted membrane insertion. However, the C-terminal deamination of maximin H5 induces a loss of tilted α-helical structure, which abolishes the ability of the peptide's N-terminal and C-terminal regions to H-bond and leads to a loss in haemolytic ability. Taken in combination, these observations strongly suggest that the C-terminal amide moiety carried by maximin H5 is required to stabilise the adoption of membrane interactive tilted structure by the peptide. Consistent with previous reports, these data show that the efficacy of interaction and specificity of maximin H5 for membranes can be attenuated by sequence modification and may assist in the development of variants of the peptide with the potential to serve as anti-infectives.

The effect of amidation on the behaviour of antimicrobial peptides.

Aurein 2.6-COOH and aurein 3.1-COOH were studied along with their naturally occurring C-terminally amidated analogues. Circular dichroism (CD) and molecular dynamic (MD) simulations were used to study the effects of amidation on the interaction of antimicrobial peptides (AMPs) with lipid bilayers. CD measurements and MD analysis suggested that both peptide analogues were predominantly random coil and adopted low levels of α-helical structure in solution (<30%) and in the presence of a lipid bilayer the peptides formed a stable α-helical structure. In general, amidated analogues have a greater propensity than the non-amidated peptides to form a α-helical structure. MD simulations predicted that aurein 2.6-COOH and aurein 3.1-CHOOH destabilised lipid bilayers from 1,2-dimyristoyl-sn-glycero-3-phosphocholine and 1,2-dimyristoyl-sn-glycero-3-phosphoserine via angled bilayer penetration. They also showed that aurein 2.6-CONH2 and aurein 3.1-CONH2 formed a helix horizontal to the plane of an asymmetric interface.

The cooperative behaviour of antimicrobial peptides in model membranes.

A systematic analysis of the hypothesis of the antimicrobial peptides' (AMPs) cooperative action is performed by means of full atomistic molecular dynamics simulations accompanied by circular dichroism experiments. Several AMPs from the aurein family (2.5,2.6, 3.1), have a similar sequence in the first ten amino acids, are investigated in different environments including aqueous solution, trifluoroethanol (TFE), palmitoyloleoylphosphatidylethanolamine (POPE), and palmitoyloleoylphosphatidylglycerol (POPG) lipid bilayers. It is found that the cooperative effect is stronger in aqueous solution and weaker in TFE. Moreover, in the presence of membranes, the cooperative effect plays an important role in the peptide/lipid bilayer interaction. The action of AMPs is a competition of the hydrophobic interactions between the side chains of the peptides and the hydrophobic region of lipid molecules, as well as the intra peptide interaction. The aureins 2.5-COOH and 2.6-COOH form a hydrophobic aggregate to minimize the interaction between the hydrophobic group and the water. Once that the peptides reach the water/lipid interface the hydrophobic aggregate becomes smaller and the peptides start to penetrate into the membrane. In contrast, aurein 3.1-COOH forms only a transient aggregate which disintegrates once the peptides reached the membrane, and it shows no cooperativity in membrane penetration.

A facile approach to manufacturing non-ionic surfactant nanodipsersions using proniosome technology and high-pressure homogenization.

In this study, a niosome nanodispersion was manufactured using high-pressure homogenization following the hydration of proniosomes. Using beclometasone dipropionate (BDP) as a model drug, the characteristics of the homogenized niosomes were compared with vesicles prepared via the conventional approach of probe-sonication. Particle size, zeta potential, and the drug entrapment efficiency were similar for both size reduction mechanisms. However, high-pressure homogenization was much more efficient than sonication in terms of homogenization output rate, avoidance of sample contamination, offering a greater potential for a large-scale manufacturing of noisome nanodispersions. For example, high-pressure homogenization was capable of producing small size niosomes (209 nm) using a short single-step of size reduction (6 min) as compared with the time-consuming process of sonication (237 nm in >18 min) and the BDP entrapment efficiency was 29.65% ± 4.04 and 36.4% ± 2.8. In addition, for homogenization, the output rate of the high-pressure homogenization was 10 ml/min compared with 0.83 ml/min using the sonication protocol. In conclusion, a facile, applicable, and highly efficient approach for preparing niosome nanodispersions has been established using proniosome technology and high-pressure homogenization.

Aurein 2.3 functionality is supported by oblique orientated α-helical formation.

In this study, an amphibian antimicrobial peptide, aurein 2.3, was predicted to use oblique orientated α-helix formation in its mechanism of membrane destabilisation. Molecular dynamic (MD) simulations and circular dichroism (CD) experimental data suggested that aurein 2.3 exists in solution as unstructured monomers and folds to form predominantly α-helical structures in the presence of a dimyristoylphosphatidylcholine membrane. MD showed that the peptide was highly surface active, which supported monolayer data where the peptide induced surface pressure changes>34 mNm(-1). In the presence of a lipid membrane MD simulations suggested that under hydrophobic mismatch the peptide is seen to insert via oblique orientation with a phenylalanine residue (PHE3) playing a key role in the membrane interaction. There is evidence of snorkelling leucine residues leading to further membrane disruption and supporting the high level of lysis observed using calcein release assays (76%). Simulations performed at higher peptide/lipid ratio show peptide cooperativity is key to increased efficiency leading to pore-formation.

Insights into the molecular mechanism of protein native-like aggregation upon glycation.

Several human neurodegenerative diseases such as Alzheimer's disease, Parkinson's disease and Familial Amyloidotic Polyneuropathy, have long been associated with, structural and functional changes in disease related proteins leading to aggregation into amyloid fibrils. Such changes can be triggered by post-translational modifications. Methylglyoxal modifications have been shown to induce the formation of small and stable native-like aggregates in the case of the amyloidogenic proteins insulin and α-synuclein. However, the fundamental biophysical mechanism underlying such methylglyoxal-induced protein aggregation is not yet fully understood. In this work cytochrome c (Cyt c) was used as a model protein for the characterization of specific glycation targets and to study their impact on protein structure, stability, and ability to form native-like aggregates. Our results show that methylglyoxal covalently modifies Cyt c at a single residue and induces early conformational changes that lead to the formation of native-like aggregates. Furthermore, partially unfolded species are formed, but do not seem to be implicated in the aggregation process. This shows a clear difference from the amyloid fibril mechanisms which involve partially or totally unfolded intermediates. Equilibrium-unfolding experiments show that glycation strongly decreases Cyt c conformational stability, which is balanced with an increase of conformational stability upon aggregation. Data collected from analytical and spectroscopic techniques, along with kinetic analysis based on least-squares parameter fitting and statistical model discrimination are used to help to understand the driving force underlying glycation-induced native-like aggregation, and enable the proposal of a comprehensive thermodynamic and kinetic model for native-like aggregation of methylglyoxal glycated Cyt c.

Thymopentin nanoparticles engineered with high loading efficiency, improved pharmacokinetic properties, and enhanced immunostimulating effect using soybean phospholipid and PHBHHx polymer.

Formulation of protein and peptide drugs with sustained release properties is crucial to enhance their therapeutic effect and minimize administration frequency. In this study, immunomodulating polymeric systems were designed by manufacturing PHBHHx nanoparticles (NPs) containing thymopentin (TP5). The release profile of the drug was studied over a period of 7 days. The PHBHHx NPs containing TP5-phospholipid (PLC) complex (TP5-PLC) displayed a spherical shape with a mean size, zeta potential, and encapsulation efficiency of 238.9 nm, -32.0 mV, and 72.81%, respectively. The cytotoxicity results showed the PHBHHx NPs had a relatively low toxicity in vitro. TP5 entrapped in the NPs could hardly release in vitro, while the NPs had longer than 7 days release duration after a single subcutaneous injection in Wistar rats. The immunodepression rat model was built to evaluate the immunomodulating effects of TP5-PLC-NPs in vivo. The results of T-lymphocyte subsets (CD3(+), CD4(+), CD8(+), and CD4(+)/CD8(+) ratio) analysis and superoxide dismutase (SOD) values suggested that TP5-PLC-NPs had stronger immunoregulation effects than TP5 solution. In conclusion, an applicable approach to markedly enhancing the loading of a water-soluble peptide into a hydrophobic polymer matrix has been introduced. Thus, TP5-PLC-NPs are promising nanomedicine systems for sustained release effects of TP5.

Reliability of HSP70 (HSPA) expression as a prognostic marker in glioma.

Production of heat shock protein 70 (HSP70/HSPA) is induced by a wide range of cellular stress conditions, such as cancer and hypoxia, with production also being linked to tumourigenesis. HSPA mRNA transcripts and proteins were examined in three human glioma cell lines, representing astrocytoma, oligodendroglioma and glioblastoma, plus 18 clinical brain tissue samples. GAPDH was used as a control gene throughout these studies and exhibited a consistent level of expression in a normal astrocyte cell line, tumourous cell lines and tissue samples. In contrast, the average HSPA mRNA copy numbers detected in glioblastoma tissue were between 1.8- and 8.8-fold higher than in lower grade glioma and control tissue, respectively, which is suggestive of a grade-related transcription profile. Similar patterns of grade-related expression were also observed in glioma cell lines. This study indicates for the first time that HSPA expression in glioma cells may possibly be grade related, and hence could have potential as a prognostic marker.

Investigation into the potential for hypoxic interior of neoplasms to enhance HSPA expression in glioma.

Production of heat shock protein 70 (HSP70/HSPA) is induced by a wide range of cellular stress conditions, such as cancer and hypoxia. This study investigated the level of HSPA gene expression in human cell lines exposed to hypoxic conditions. Three human glioma cell lines were selected for this study, each representing different types of glioma (astrocytoma, oligodendroglioma and glioblastoma), with a normal human astrocyte cell line used as a control. HSPA RNA transcripts and proteins were examined in these samples using qRT-PCR, immunofluorescence and flow cytometry techniques. The average HSPA mRNA copy numbers detected in three glioma cell lines were approximately sixfold higher than in a normal astrocyte cell line. The expression of HSPA was induced in normal cell lines immediately after exposure to hypoxia with 33% of cells exhibiting expression. However, the effects of hypoxia on gene expression were marginal in glioma cells, due to the already increased levels of HSPA with both pre- and post-hypoxia samples showing expression in approximately 90% of cells. These results show that whilst the stress caused by both cancer and hypoxia induce HSPA expression the underlying imprint of tumourgenesis leads to sustained expression.

Susceptibility of sheep, human, and pig erythrocytes to haemolysis by the antimicrobial peptide Modelin 5.

Modelin-5-CONH2, a synthetic antimicrobial peptide, was used to gain an insight into species-selective haemolytic activity. The peptide displayed limited haemolytic activity against sheep (12%), human (2%), and pig (2%) erythrocytes. Our results show that Modelin-5-CONH2 had a disordered structure in the presence of vesicles formed from sheep, human, and pig erythrocyte lipid extract (<26% helical) yet folded to form helices in the presence of a phosphatidylcholine (PC) membrane interface (e.g. >42% in the presence of 1,2-dimyristoyl-sn-glycero-3-phosphocholine). Monolayer studies showed a strong correlation between anionic lipid content and monolayer insertion and lysis inducing surface pressure changes of 9.17 mN m(-1) for 1,2-dimyristoyl-sn-glycero-3-phospho-L-serine compared with PC monolayers, which induced pressure changes of ca. 3 mN m(-1). The presence of cholesterol in the membrane is shown to increase the packing density as the PC:sphingomyelin (SM) ratio increases so preventing the peptide from forming a stable association with the membrane. The data suggests that the key driver for membrane interaction for Modelin-5-CONH2 is the anionic lipid attraction. However, the key factors in the species-specific haemolysis level for this peptide are the differing packing densities which are influenced by the SM:PC:cholesterol ratio.

The interaction of aurein 2.5 with fungal membranes.

Aurein 2.5 (GLFDIVKKVVGAFGSL-NH2) is an antimicrobial peptide, which was seen to have activity against Stachybotris chartarum, Penicillium roseopurpureum and Aspergillus flavus with minimum fungicidal concentrations in the range 250-500 µM. S. chartarum showed enhanced susceptibility to lysis as compared to P. roseopurpureum and A. flavus, (44, 26 and 28 % respectively). Monolayers formed from lipid membrane extracts derived from S. chartarum, P. roseopurpureum and A. flavus showed maximal surface pressure changes of 13.5, 10.3 and 10.2 mN m(-1) respectively. However, aurein 2.5 adopted similar levels of α-helical structure (circa 45 %) in the presence of vesicles formed from membrane lipid extracts derived from all three fungi. These data imply that differential activity is not due to targeting and membrane association but linked to the ability of the bound peptide to lyse the cells. At sterol levels mimetic of eukaryotic systems, high levels of α-helical structure (circa 50 %) were also observed and hence similar binding. However, enhanced sterol levels (>0.6) led to a reduction in monolayer membrane interaction, suggesting that the sterols influence efficacy. Consistent with this suggestion, thermodynamic analysis showed that the peptide was able to destabilise model fungal monolayers, as indicated by negative values of ∆Gmix.

Stability of parenteral nanoemulsions loaded with paclitaxel: the influence of lipid phase composition, drug concentration and storage temperature.

Paclitaxel was loaded into licensed parenteral nutrition nanoemulsions (Clinoleic® and Intralipid®) using bath sonication, and the stability of the formulations was investigated following storage for two weeks at room temperature or at 4 °C. In general, Clinoleic droplets were smaller than Intralipid droplets, being around 255 and 285 nm, respectively, for blank and freshly loaded emulsions. Regardless of storage temperature, the Clinoleic exhibited a very slight or no increase in droplet size upon storage, whilst the droplet size of the Intralipid emulsion increased significantly. The droplet size of both emulsions was minimally affected by paclitaxel concentration within the range of 0, 1, 3 and 6 mg/ml. The pH of both emulsions markedly decreased upon storage at room temperature, which was possibly attributed to the production of fatty acids resulting from phospholipid hydrolysis. However, at 4 °C, the pH of Clinoleic emulsion was unaffected by storage or paclitaxel concentration while the Intralipid emulsion demonstrated a trend for pH reduction. Both nanoemulsions had a negative zeta potential, with the Clinoleic formulations having the highest charge, possibly explaining the better size stability of this emulsion. Overall, this study has shown that paclitaxel was successfully loaded into clinically licensed parenteral emulsions and that Clinoleic showed greater stability than the Intralipid.

On the selectivity and efficacy of defense peptides with respect to cancer cells.

Here, we review potential determinants of the anticancer efficacy of innate immune peptides (ACPs) for cancer cells. These determinants include membrane-based factors, such as receptors, phosphatidylserine, sialic acid residues, and sulfated glycans, and peptide-based factors, such as residue composition, sequence length, net charge, hydrophobic arc size, hydrophobicity, and amphiphilicity. Each of these factors may contribute to the anticancer action of ACPs, but no single factor(s) makes an overriding contribution to their overall selectivity and toxicity. Differences between the anticancer actions of ACPs seem to relate to different levels of interplay between these peptide and membrane-based factors.

A novel form of bacterial resistance to the action of eukaryotic host defense peptides, the use of a lipid receptor.

Host defense peptides show great potential for development as new antimicrobial agents with novel mechanisms of action. However, a small number of resistance mechanisms to their action are known, and here, we report a novel bacterial resistance mechanism mediated by a lipid receptor. Maximin H5 from Bombina maxima bound anionic and zwitterionic membranes with low affinity (Kd > 225 µM) while showing a strong ability to lyse (>55%) and penetrate (π > 6.0 mN m(-1)) these membranes. However, the peptide bound Escherichia coli and 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE) membranes with higher affinity (Kd < 65 µM) and showed a very low ability for bilayer lysis (<8%) and partitioning (π > 1.0 mN m(-1)). Increasing levels of membrane DMPE correlated with enhanced binding by the peptide (R(2) = 0.96) but inversely correlated with its lytic ability (R(2) = 0.98). Taken with molecular dynamic simulations, these results suggest that maximin H5 possesses membranolytic activity, primarily involving bilayer insertion of its strongly hydrophobic N-terminal region. However, this region was predicted to form multiple hydrogen bonds with phosphate and ammonium groups within PE head-groups, which in concert with charge-charge interactions anchor the peptide to the surface of E. coli membranes, inhibiting its membranolytic action.