Microcapsules of Poly(butylene adipate-co-terephthalate) (PBAT) Loaded with Aliphatic Isocyanates for Adhesive Applications.

This work introduces the encapsulation of hexamethylene diisocyanate derivatives (HDI, TriHDI, and PHDI) with the biodegradable polymer poly(butylene adipate-co-terephthalate) (PBAT) through a solvent evaporation method. These microcapsules (MCs) were then employed in adhesive formulations for footwear. Moreover, MCs containing PHDI were produced in a closed vessel, demonstrating the potential for recovering and reusing organic solvents for the first time. The MCs were achieved with an isocyanate payload reaching up to 68 wt %, displaying a spherical shape, a core-shell structure, and thin walls without holes or cracks. The application of MCs as cross-linking agents for adhesives was evaluated following industry standards. The adhesives' strength surpassed the minimum requirement by a significant margin. Creep tests demonstrated that the formulation with MCs exhibits superior thermostability. Furthermore, the formulation with MCs-PHDI presented the best results reported to date for this type of system, as no displacement was observed in the bonded substrates. Environmental assessment indicates that adhesives with MCs have higher global warming potential (+16.2%) and energy consumption (+10.8%) than the standard commercial adhesives, but under alternative realistic scenarios, the differences can be insignificant. Therefore, adhesive formulations incorporating MCs promise to be on par with traditional adhesive systems regarding environmental impacts while providing benefits such as improved and safe handling of isocyanates and excellent bonding effectiveness.

Biodegradable Microcapsules of Poly(Butylene Adipate-co-Terephthalate) (PBAT) as Isocyanate Carriers and the Effect of the Process Parameters.

Poly(butylene adipate-co-terephthalate) (PBAT), a biodegradable flexible, and tough polymer is herein used, for the first time, to encapsulate and protect isocyanate derivatives. Isocyanates are essential building blocks widely employed in the chemical industry for the production of high-performing materials. Microencapsulation of isocyanates eliminates the risks associated with their direct handling and protects them from moisture. In light of this, and having in mind eco-innovative products and sustainability, we present a straightforward process to encapsulate isophorone diisocyanate (IPDI) using this biodegradable polymer. Spherical and core-shell microcapsules (MCs) were produced by an emulsion system combined with the solvent evaporation method. The MCs present a regular surface, without holes or cracks, with a thin shell and high isocyanate loadings, up to 79 wt%. Additionally, the MCs showed very good isocyanate protection if not dispersed in organic or aqueous solutions. Effects of various process parameters were systematically studied, showing that a higher stirring speed (1000 rpm) and emulsifier amount (2.5 g), as well as a smaller PBAT amount (1.60 g), lead to smaller MCs and narrower size distribution.

Emulsion Stabilization Strategies for Tailored Isocyanate Microcapsules.

We report on the stabilization of an oil-in-water (O/W) emulsion to, combined with interfacial polymerization, produce core-shell polyurea microcapsules (MCs) containing isophorone diisocyanate (IPDI). These will act as crosslinkers for mono-component adhesives. The emulsion stabilization was evaluated using three types of stabilizers, a polysaccharide (gum arabic) emulsifier, a silicone surfactant (Dabco®DC193), a rheology modifier (polyvinyl alcohol), and their combinations. Emulsion sedimentation studies, optical microscopy observation, and scanning electron microscopy enabled us to assess the emulsions stability and droplet size distribution and correlate them to the MCs morphology. Fourier transform infrared spectroscopy and thermogravimetric analysis revealed the MCs composition and enabled us to evaluate the encapsulation yield. All stabilizers, except DC193, led to spherical, loose, and core-shelled MCs. The rheology modifier, which increases the continuous phase viscosity, reduces the emulsion droplets sedimentation, keeping their size constant during the MCs' synthesis. This allowed us to obtain good quality MCs, with a smaller average diameter, of approximately 40.9 µm mode, a narrower size distribution and 46 wt% of encapsulated IPDI. We show the importance of the emulsion stability to tune the MCs morphology, size, and size distribution, which are critical for improved homogeneity and performance when used, e.g., in natural and synthetic adhesive formulations industry.

Design of Experiment for Optimizing Microencapsulation by the Solvent Evaporation Technique.

We employed microemulsion combined with the solvent evaporation technique to produce biodegradable polycaprolactone (PCL) MCs, containing encapsulated isophorone diisocyanate (IPDI), to act as crosslinkers in high-performance adhesive formulations. The MC production process was optimized by applying a design of experiment (DoE) statistical approach, aimed at decreasing the MCs' average size. For that, three different factors were considered, namely the concentration of two emulsifiers, polyvinyl alcohol (PVA) and gum arabic (GA); and the oil-to-water phase ratio of the emulsion. The significance of each factor was evaluated, and a predictive model was developed. We were able to decrease the average MC size from 326 µm to 70 µm, maintaining a high encapsulation yield of approximately 60% of the MCs' weight, and a very satisfactory shelf life. The MCs' average size optimization enabled us to obtain an improved distributive and dispersive mixture of isocyanate-loaded MCs at the adhesive bond. The MCs' suitability as crosslinkers for footwear adhesives was assessed following industry standards. Peel tests revealed peel strength values above the minimum required for casual footwear, while the creep test results indicated an effective crosslinking of the adhesive. These results confirm the ability of the MCs to release IPDI during the adhesion process and act as crosslinkers for new adhesive formulations.

Poly(Lactic Acid)/Graphite Nanoplatelet Nanocomposite Filaments for Ligament Scaffolds.

The anterior cruciate ligament (ACL) is one of the most prone to injury in the human body. Due to its insufficient vascularization and low regenerative capacity, surgery is often required when it is ruptured. Most of the current tissue engineering (TE) strategies are based on scaffolds produced with fibers due to the natural ligament's fibrous structure. In the present work, composite filaments based on poly(L-lactic acid) (PLA) reinforced with graphite nanoplatelets (PLA+EG) as received, chemically functionalized (PLA+f-EG), or functionalized and decorated with silver nanoparticles [PLA+((f-EG)+Ag)] were produced by melt mixing, ensuring good filler dispersion. These filaments were produced with diameters of 0.25 mm and 1.75 mm for textile-engineered and 3D-printed ligament scaffolds, respectively. The resulting composite filaments are thermally stable, and the incorporation of graphite increases the stiffness of the composites and decreases the electrical resistivity, as compared to PLA. None of the filaments suffered significant degradation after 27 days. The composite filaments were processed into 3D scaffolds with finely controlled dimensions and porosity by textile-engineered and additive fabrication techniques, demonstrating their potential for ligament TE applications.

Isophorone Diisocyanate (IPDI) Microencapsulation for Mono-Component Adhesives: Effect of the Active H and NCO Sources.

Polyurea/polyurethane (PUa/PU) shell microcapsules (MCs), containing high loadings of isophorone diisocyanate (IPDI) in the core, were developed to enable the production of mono-component, eco-friendly and safer adhesive formulations for the footwear industry. IPDI microencapsulation was obtained via oil⁻in⁻water (O/W) microemulsion combined with interfacial polymerization. A methylene diphenyl diisocyanate (MDI) compound (a commercial blend of monomeric and polymeric species), with higher reactivity than IPDI and low viscosity, was added to the O phase to competitively contribute to the shell formation, improving its quality. Four different active H sources were tested, aimed at achieving a high encapsulation yield. The successful encapsulation of IPDI was confirmed by Fourier transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), while the MCs' morphology and size distribution were assessed by scanning electron microscopy (SEM). The incorporation of a multifunctional isocyanate silane in the O phase, as "latent" active H source, led to the formation of impermeable PUa/PU-silica hybrid shell MCs with more than 60 wt.% of pure encapsulated IPDI. A proof-of-concept study shows high peeling strength and a structural type of failure of the adhesive joint, revealing an effective IPDI release. These new engineered MCs are found to be promising crosslinkers for mono-component adhesives for high demanding applications.

Indoor and outdoor suspended particulate matter and associated carbonaceous species at residential homes in northwestern Portugal.

Particulate matter with an aerodynamic diameter equal to or less than 10 µm (PM10), organic carbon (OC) and elemental carbon (EC) concentrations were measured simultaneously in the indoor and outdoor air of 4 residences located in urban and sub-urban areas in northwestern Portugal. The residences were studied with occupants. One residence was also studied without any indoor activity, taking advantage of the fact that the occupants had moved into a new home. First, 48-h aerosol samples were collected on quartz fiber filters with low-volume samplers equipped with size selective inlets. The filters were weighed and then analyzed for OC and EC using a thermal-optical transmittance method. The average indoor and outdoor PM10 concentrations in the occupied residences were 71.9 ± 38.3 µg/m(3) and 54.0 ± 13.3 µg/m(3), respectively. Despite the higher concentration of PM10 indoors, outdoor sources were found to be a significant contributor to indoor concentrations. An estimate based on data from the residence studied under different occupancy conditions indicated that outdoor sources can account for 68% of the indoor PM10 mass concentration. Average indoor to outdoor (I/O) ratios for OC ranged from 1.7 to 5.6 in occupied residences, showing that indoor sources, such as cooking, smoking, biomass burning and movement of people, strongly influenced indoor OC concentrations. In contrast, I/O ratios for EC were close to 1, except for a smokers' residence, suggesting that indoor concentrations were mainly controlled by outdoor sources, most likely from vehicular emissions and biomass burning.

The use of cyclic voltammetry to detect biofilms formed by Pseudomonas fluorescens on platinum electrodes.

The development of an electrochemical detector to monitor the in situ formation of biofilms is described. The detector consisted of an electrochemical cell containing three electrodes, whose response to the application of a potential profile to the working electrode was sensitive to the amount of biofilm present on the surface. The electrochemical technique used was repetitive cyclic voltammetry. Differences between the response of the uncolonised electrode and after Pseudomonas fluorescens biofilms of different ages were grown on its surface were determined. The results show that cyclic voltammetry applied to platinum electrodes can be used to detect young biofilms. The development of the shape of the voltammogram as the potential is cycled may constitute a means of providing information on the coverage of the surface. Observation of the platinum electrodes before and after the electrochemical measurements showed that even after 30 min of recycling, most of the cells were still adhered to the surface, although some may have lost viability.