Induced Protic Behaviour in Aprotonic Ionic Liquids by Anion Basicity for Efficient Carbon Dioxide Capture.

The interactions between aprotonic tetrabutylphosphonium carboxylate ionic liquids (ILs), [P4 4 4 4 ][Cn COO] (n=1, 2 and 7), and water were investigated. The cation-anion interactions occur via the α-1 H on [P4 4 4 4 ]+ and the carboxylate headgroup of the anion. Upon addition, H2 O localises around the carboxylate headgroups, inducing an electron inductive effect towards the oxygens, leading to ion-pair separation. Studies with D2 O and [P4 4 4 4 ][Cn COO] revealed protic behaviour of the systems, with proton/deuterium exchange occurring at the α-1 H of the cation, promoted by the basicity of the anion, forming an intermediate ylide. The greater influence of van der Waals forces of the [P4 4 4 4 ][C7 COO] system allows for re-orientation of the ions through larger interdigitation. The protic behaviour of the neat ILs allows for CO2 to be chemically absorbed on the ylide intermediate, forming a phosphonium-carboxylate zwitterion, signifying proton exchange occurs even in the absence of H2 O. The absorption of CO2 in equimolar IL-H2 O mixtures forms a hydrogen carbonate, through a proposed reaction of the CO2 with an intermediate hydroxide, and carboxylic acid.

Insight into the Hydration of Cationic Surfactants: A Thermodynamic and Dielectric Study of Functionalized Quaternary Ammonium Chlorides.

Hydrophobic interactions are one of the main thermodynamic driving forces in self-assembly, folding, and association processes. To understand the dehydration-driven solvent exposure of hydrophobic surfaces, the micellization of functionalized decyldimethylammonium chlorides, XC10Me2N+Cl-, with a polar functional group, X = C2OH, C2OMe, C2OC2OMe, C2OOEt, together with the "reference" compound decyltrimethylammonium chloride, C10Me3N+Cl-, was investigated in aqueous solution by density measurements, isothermal titration calorimetry (ITC), and dielectric relaxation spectroscopy (DRS). From the density data, the apparent molar volumes of monomers and micelles were estimated, whereas the ITC data were analyzed with the help of a model equation, yielding the thermodynamic parameters and aggregation number. From the DRS spectra, effective hydration numbers of the free monomers and micelles were deduced. The comprehensive analysis of the obtained results shows that the thermodynamics of micellization are strongly affected by the nature of the functional group. Surprisingly, the hydration of micelles formed by surfactant cations with a single alkyl chain on quaternary ammonium is approximately the same, regardless of the alkyl chain length or functionalization of the headgroup. However, notable differences were found for the free monomers where increasing polarity lowers the effective hydration number.

X-Ray structure and ionic conductivity studies of anhydrous and hydrated choline chloride and oxalic acid deep eutectic solvents.

In this study, we report the structural, thermodynamic and electrochemical properties of deep eutectic solvents (DESs) formed from choline chloride and oxalic acid in anhydrous and di-hydrated form in a 1 : 1 molar ratio. As far as we are aware, this is the first joint X-ray diffraction-molecular dynamics study focussed on analyzing the structural features of DESs.

Sum frequency generation spectroscopy of tetraalkylphosphonium ionic liquids at the air-liquid interface.

Sum frequency generation (SFG) spectroscopy is a nonlinear vibrational spectroscopic technique used in the study of interfaces, due to its unique ability to distinguish surface molecules that have preferential ordering compared to the isotropic bulk. Here, a series of alkyltrioctylphosphonium chloride ionic liquids, systematically varied by cation structure, were characterized at the air-liquid interface by SFG. The effect on surface structure resulting from molecular variation (i.e., addition of cyano- and methoxy-functional groups) of the cation alkyl chain was investigated. SFG spectra in the C-H stretching region (2750-3100 cm-1) for [P8 8 8 n ][Cl], where n = 4, 5, 8, 10, 12, or 14, showed characteristic changes as the alkyl chain length was increased. Spectral profiles for n = 4, 5, 8, or 10 appeared similar; however, when the fourth alkyl chain was sufficiently long (as in the case of n = 12 or n = 14), abrupt changes occurred in the spectra. Molecular dynamics (MD) simulation of a slab of each ionic liquid (with n = 8, 10, or 12) confirmed gauche defects, with enhancement for the long alkyl chain and an abrupt increase of gauche occurrence from n = 8 to n = 10. A comparison of the tilt angle distribution from the simulation and the SFG analysis show a broad distribution of angles. Using experimental SFG spectra in conjunction with MD simulations, a comprehensive molecular picture at the surface of this unique class of liquids is presented.

X-ray and molecular dynamics studies of butylammonium butanoate-water binary mixtures.

The nanostructural organisation of mixtures of the ionic liquid (butylammonium butanoate) and water at several mole fractions of water has been investigated using small and wide angle X-ray scattering (S-WAXS) and molecular dynamics (MD) simulations. The presence of a first sharp diffraction peak (FSDP) in the pure ionic liquid has been observed, experimentally and theoretically, suggesting the possibility of segregation of domains of different polarity in the system. With increasing dilution in water, the prepeak is shifted towards smaller Q values, and becomes very weak, while the principal peak moves towards larger Q values. These phenomena suggest the disruption of the hydrogen-bonded network of the ionic liquid, primarily through hydrogen bonding of the anion to water, a conclusion supported by MD simulations.

A new insight into the nanostructure of alkylammonium alkanoates based ionic liquids in water.

In this paper, small angle X-ray scattering has been used to study a series of ionic liquids, alkylammonium alkanoates ([N0 0 0 n][CmCO2]), with varying alkyl chain lengths in the cation and the anion. We investigate the behaviour and the structure of such ionic liquids in their neat state, and in binary mixtures with water. To the best of our knowledge, this is the first structural study dealing with the behaviour of propylammonium propanoate [N0 0 0 3][C2CO2], butylammonium propanoate [N0 0 0 4][C2CO2], propylammonium butanoate [N0 0 0 3][C3CO2] and butylammonium butanoate [N0 0 0 4][C3CO2] when mixed in water. Generally, in the ionic liquids containing alkyl chains on both the cation and the anion, the correlation distance and the resulting scattering peak, which signal intermediate range order, are affected equally by both of the chains. The interesting result obtained regarding these systems is that the shift of the pre- and principal peaks with the addition of water depends on the overall molar concentration of the chains and is generally cumulative. Although, for a given sum of cation and anion chain lengths, the shift is reliant on the cation-anion combination in the neat state, it is not the case in their mixtures with water. In some recent papers, it has been reported that with addition of water, the pre-peak position remains constant, but our results show a shift in both pre- and principal Q peaks.

Estimation of the refractive indices of imidazolium-based ionic liquids using their polarisability values.

Statistical models have been used to estimate the refractive index of 72 imidazolium-based ionic liquids using the electronic polarisability of their ions as the data for two different mathematical approaches: artificial neural networks, in the form of multi-layer perceptrons, and multiple linear regression models. Although the artificial neural networks and linear models have been able to accomplish this task, the multi-layer perceptron model has been shown to be a more accurate method, thanks to its ability of determining non-linear relationships between different dependent variables. Additionally, it is clear that the multiple linear regression presents a systematic deviation in the estimated refractive index values, which confirms that it is an inappropriate model for this system.

Spectroscopic Signatures of Hydrogen-Bonding Motifs in Protonic Ionic Liquid Systems: Insights from Diethylammonium Nitrate in the Solid State.

Diethylammonium nitrate, [N0 0 2 2][NO3], and its perdeuterated analogue, [N D D 2 2] [NO3], were structurally characterized and studied by infrared, Raman, and inelastic neutron scattering (INS) spectroscopy. Using these experimental data along with state-of-the-art computational materials modeling, we report unambiguous spectroscopic signatures of hydrogen-bonding interactions between the two counterions. An exhaustive assignment of the spectral features observed with each technique has been provided, and a number of distinct modes related to NH···O dynamics have been identified. We put a particular emphasis on a detailed interpretation of the high-resolution, broadband INS experiments. In particular, the INS data highlight the importance of conformational degrees of freedom within the alkyl chains, a ubiquitous feature of ionic liquid (IL) systems. These findings also enable an in-depth physicochemical understanding of protonic IL systems, a first and necessary step to the tailoring of hydrogen-bonding networks in this important class of materials.

On the self-aggregation and fluorescence quenching aptitude of surfactant ionic liquids.

The aggregation behavior in aqueous solution of a number of ionic liquids was investigated at ambient conditions by using three techniques: fluorescence, interfacial tension, and (1)H NMR spectroscopy. For the first time, the fluorescence quenching effect has been used for the determination of critical micelle concentrations. This study focuses on the following ionic liquids: [Cnmpy]Cl (1-alkyl-3-methylpyridinium chlorides) with different linear alkyl chain lengths (n=4, 10, 12, 14, 16, or 18), [C12mpip]Br (1-dodecyl-1-methylpiperidinium bromide), [C12mpy]Br (1-dodecyl-3-methylpyridinium bromide), and [C12mpyrr]Br (1-dodecyl-1-methylpyrrolidinium bromide). Both the influence of the alkyl side-chain length and the type of ring in the cation (head) on the CMC were investigated. A comparison of the self-aggregation behavior of ionic liquids based on 1-alkyl-3-methylpyridinium and 1-alkyl-3-methylpyridinium cations is provided. It was observed that 1-alkyl-3-methylpyridinium ionic liquids could be used as quenchers for some fluorescence probes (fluorophores). As a consequence, a simple and convenient method to probe early evidence of aggregate formation was established.

Efficient Extraction of a Docosahexaenoic Acid (DHA)-Rich Lipid Fraction from Thraustochytrium sp. Using Ionic Liquids.

Polyunsaturated fatty acids (PUFAs) play a significant role in the modulation and prevention of various diseases, and hence are attracting increasing attention from the biotech industry. Thraustochytrids are marine heterokonts that exhibit robust growth rates, high PUFA content, and more specifically, a large percentage of omega-3 fatty acids like docosahexaenoic acid (DHA). Recently, ionic liquids (ILs) have been shown to improve the efficiency of organic solvent extraction of oils from wet oleaginous yeast and microalgae under mild conditions. Two ILs, the imidazolium 1-ethyl-3-methylimidazolium ethylsulfate [C2mim][EtSO4] IL and the phosphonium (tetrabutylphosphonium propanoate [P4444][Prop]) IL were assessed for their ability to facilitate extraction of PUFA-containing lipids from a Thraustochytrium sp. (T18) through efficient cell wall disruption. The oil extracted after IL pretreatment was further characterized with respect to fatty acid methyl ester (FAME) composition, while the effects of process parameters, such as the ratio of ionic liquid to co-solvent, the mass ratio of microalgae to the mixture of ionic liquid, and type of co-solvent were also investigated for both ILs. The results indicate that these ILs can disrupt the cells of Thraustochytrium sp. when mixed with a co-solvent (methanol), and facilitated the recovery of oils over a large degree of dewatered Thraustochytrium biomass (0⁻77.2 wt% water) in a short period of time (60 min) at ambient temperature, hence demonstrating a water compatible, low-energy, lipid recovery method. The lipid recovery was not affected by repeated usage of recycled ILs (tested up to five times).

The Opposite Effect of Water and N-Methyl-2-Pyrrolidone Cosolvents on the Nanostructural Organization of Ethylammonium Butanoate Ionic Liquid: A Small- and Wide-Angle X-Ray Scattering and Molecular Dynamics Simulations Study.

Two series of mixtures of ethylammoniumbutanoate (EAB, [N0 0 0 2][C3CO2]) in water and N-methyl-2-pyrrolidone (NMP) have been prepared at different molar fractions to assess the effect of these two polar solvents on the nanostructural order present in [N0 0 0 2][C3CO2]. The small- and wide-angle X-ray scattering (SWAXS) pattern of the liquid in neat state shows a prepeak at Q = 0.513 Å-1, which is associated with the aggregation of nonpolar alkyl chains of both cations and anions. Interestingly, the two solvents affect the nanostructure of [N0 0 0 2][C3CO2] differently, though both are polar. In the case of water addition to the mixture, the prepeak shifts to lower Q values, while in NMP, it moves toward higher values. Also, the principal peaks move in opposite direction in both solvents. The underlying expansion (water) or contraction (NMP) of the solutions observed by the scattering experiments is discussed in terms of molecular dynamics (MD) simulations, which are in very good agreement with the observed patterns.

Emerging Evidences of Mesoscopic-Scale Complexity in Neat Ionic Liquids and Their Mixtures.

Ionic liquids (ILs) represent a blooming class of continuously developing advanced materials, with the aiming of a green chemical industry. Their appealing physical and chemical properties are largely influenced by their micro- and mesoscopic structure that is known to possess a high degree of hierarchical organization. High-impact application fields are largely affected by the complex morphology of neat ionic liquids and their mixtures. This Perspective highlights new arising research directions that point to an enhanced level of structural complexity in several IL-based systems, including mixtures. The latter represent a change in paradigm in the approach to formulate new, task-specific IL-based media, and the reported phenomenology has the potential to further expand their range of applications by calling for a revisitation of the nature of interactions in these exciting media.

Ionic Liquid-Liquid Chromatography: A New General Purpose Separation Methodology.

Ionic liquids can form biphasic solvent systems with many organic solvents and water, and these solvent systems can be used in liquid-liquid separations and countercurrent chromatography. The wide range of ionic liquids that can by synthesised, with specifically tailored properties, represents a new philosophy for the separation of organic, inorganic and bio-based materials. A customised countercurrent chromatograph has been designed and constructed specifically to allow the more viscous character of ionic liquid-based solvent systems to be used in a wide variety of separations (including transition metal salts, arenes, alkenes, alkanes, bio-oils and sugars).

Protonic Ammonium Nitrate Ionic Liquids and Their Mixtures: Insights into Their Thermophysical Behavior.

This study is centered on the thermophysical characterization of different families of alkylammonium nitrate ionic liquids and their binary mixtures, namely the determination at atmospheric pressure of densities, electric conductivities and viscosities in the 288.15 < T/K < 353.15 range. First, measurements focusing on ethylammonium, propylammonium and butylammonium nitrate systems, and their binary mixtures, were determined. These were followed by studies involving binary mixtures composed of ethylammonium nitrate (with three hydrogen bond donor groups) and different homologous ionic liquids with differing numbers of hydrogen bond donor groups: diethylammonium nitrate (two hydrogen bond donors), triethylammonium nitrate (one hydrogen bond donor) and tetraethylammonium nitrate (no hydrogen bond donors). Finally, the behavior of mixtures with different numbers of equivalent carbon atoms in the alkylammonium cations was analyzed. The results show a quasi-ideal behavior for all monoalkylammonium nitrate mixtures. In contrast, the other mixtures show deviations from ideality, namely when the difference in the number of carbon atoms present in the cations increases or the number of hydrogen bond donors present in the cation decreases. Overall, the results clearly show that, besides the length and distribution of alkyl chains present in a cation such as alkylammonium, there are other structural and interaction parameters that influence the thermophysical properties of both pure compounds and their mixtures.

An ionic liquid process for mercury removal from natural gas.

Efficient scrubbing of mercury vapour from natural gas streams has been demonstrated both in the laboratory and on an industrial scale, using chlorocuprate(II) ionic liquids impregnated on high surface area porous solid supports, resulting in the effective removal of mercury vapour from natural gas streams. This material has been commercialised for use within the petroleum gas production industry, and has currently been running continuously for three years on a natural gas plant in Malaysia. Here we report on the chemistry underlying this process, and demonstrate the transfer of this technology from gram to ton scale.

Structure and dynamics in protic ionic liquids: a combined optical Kerr-effect and dielectric relaxation spectroscopy study.

The structure and dynamics of ionic liquids (ILs) are unusual due to the strong interactions between the ions and counter ions. These microscopic properties determine the bulk transport properties critical to applications of ILs such as advanced fuel cells. The terahertz dynamics and slower relaxations of simple alkylammonium nitrate protic ionic liquids (PILs) are here studied using femtosecond optical Kerr-effect spectroscopy, dielectric relaxation spectroscopy, and terahertz time-domain spectroscopy. The observed dynamics give insight into more general liquid behaviour while comparison with glass-forming liquids reveals an underlying power-law decay and relaxation rates suggest supramolecular structure and nanoscale segregation.

Structural properties of 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide ionic liquids: X-ray diffraction data and molecular dynamics simulations.

X-ray diffraction data for 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amides are reported as a function of the length of the alkyl chain on the imidazolium ring. The measured diffraction patterns have been compared with the theoretical patterns calculated (from the geometries obtained) with molecular dynamics simulations. This provides a detailed description (at the atomistic level) of the morphology in the liquid state of these salts, highlighting the role played by the alkyl chain length. An analysis of the behavior of the hydrogen bonds that are formed between the imidazolium acidic protons and the anion is presented.

Speciation of chloroindate(III) ionic liquids.

A range of chloroindate(iii) ionic liquid systems was prepared by mixing of 1-alkyl-3-methylimidazolium chloride with indium(iii) chloride in various ratios, expressed as the mol fraction of indium(iii) chloride, chi(InCl(3)). For chi(InCl(3)) 0.50, the products were biphasic (suspensions of a solid in an ionic liquid). Speciation of these chloroindate(iii) systems was carried out using a wide range of techniques: differential scanning calorimetry (DSC), polarised optical microscopy (POM), liquid-state and solid-state (115)In NMR spectroscopy, X-ray photoelectron spectroscopy (XPS) and extended X-ray absorption fine structure (EXAFS). Ionic liquids prepared using an excess of the organic chloride (chi(InCl(3)) < 0.5) contained [InCl(6)](3-), [InCl(5)](2-) and [InCl(4)](-) anions, in proportions dependent on the chi(InCl(3)) value. Equimolar mixtures yielded single compounds: 1-alkyl-3-methylimidazolium tetrachloroindates(iii). Systems containing an excess of indium(iii) chloride (chi(InCl(3)) > 0.5) contained indium(iii) chloride powder suspended in a neutral tetrachloroindate ionic liquid.

Applications of ionic liquids in the chemical industry.

In contrast to a recently expressed, and widely cited, view that "Ionic liquids are starting to leave academic labs and find their way into a wide variety of industrial applications", we demonstrate in this critical review that there have been parallel and collaborative exchanges between academic research and industrial developments since the materials were first reported in 1914 (148 references).

Decolorization of ionic liquids for spectroscopy.

It has been widely recognized that although ionic liquids should be colorless, they are frequently not. Colored samples appear to be pure by most analytical techniques (e.g., NMR spectroscopy, mass spectrometry, HPLC, and ion chromatography), and there have been many attempts to identify the source of color in our own laboratories and others-after 20 years the best that can be said is that the impurities are at a very low level (probably parts per billion) with very high molar extinction coefficients. In this paper, we do not identify these impurities but describe a practical method for removing them for spectrochemical applications. We clearly note that the method is not "green", but we anticipate that it will only be applied to the small volumes of ionic liquids required for fundamental spectroscopic studies in academia but not in industrial processes.