Is imiquimod a promising drug to treat oral mucosa diseases? A scoping review and new perspectives.

Imiquimod (IMQ) is a chemotherapeutic and immunostimulant drug that is applied topically, demonstrating antitumor and antiviral activities. The objective of this review was to compile data on the off-label use of IMQ in oral mucosal diseases. IMQ has exhibited effectiveness in the treatment of various oral mucosal conditions, including oral carcinogenic lesions, neoplasms, HPV-related lesions and autoimmune disorders. Although IMQ holds promise as a potential strategy for addressing oral mucosal lesions, it is important to note that significant side effects have been frequently reported. Nonetheless, it is crucial to develop and test new technological systems, such as the combination of nanotechnology with innovative drug delivery platforms. These advancements aim to minimize side effects and prolong the drug's contact time with the mucosa, preventing its removal by salivary flow.

Efficacy and safety of a 0.05 % nanoencapsulated imiquimod hydrogel for the treatment of actinic cheilitis: Drug release analysis and clinical study.

Actinic cheilitis (AC) is a lip disorder, with no standard treatment. Imiquimod (IMIQ) is an immunomodulator that treat precancerous lesions; however, its commercial form causes severe adverse effects. This study aimed to assess IMQ release from a chitosan hydrogel containing 0.05 % nanoencapsulated (NANO) imiquimod (IMIQ-0.05 %-NANO) and its efficacy in AC treatment. The hydrogels were prepared by incorporating chitosan into polymeric nanocapsules (NCimiq) loaded with IMQ, produced using the interfacial deposition of preformed polymer method. IMQ release was evaluated using automated Franz Cells. A triple-blind randomized controlled trial (49 subjects) compared the efficacy of: IMIQ-0.05 %-NANO, 5 % free imiquimod (IMIQ-5 %), 0.05 % free imiquimod (IMIQ-0.05 %), and placebo hydrogel. The IMIQ-NANO-0.05 % and IMIQ-5 % groups exhibited significantly higher rates of clinical improvement (p < 0.05); however, the IMIQ-5 % group experienced more adverse effects (92.3 % of subjects) compared to other groups (p < 0.05). In conclusion, in the studied sample, IMIQ-NANO-0.05 % was a safe and effective option to treat AC.

The Anti-Arthritic Activity of Diclofenac Lipid-Core Nanocapsules: Stereological Analysis Showing More Protection of Deep Joint Components.

Diclofenac is the most prescribed nonsteroidal anti-inflammatory drug worldwide and is used to relieve pain and inflammation in inflammatory arthritis. Diclofenac is associated with serious adverse effects, even in regular-dose regimens. Drug delivery systems can overcome this issue by reducing adverse effects and optimizing their efficacy. This study evaluated the activity of lipid-core nanocapsules loaded with diclofenac (DIC-LNCs) in an experimental model of adjuvant-induced arthritis. The diclofenac nanoformulation was obtained via self-assembly. A stereological analysis approach was applied for the morphological quantification of the volume, density, and cellular profile count of the metatarsophalangeal joints of rats. Proinflammatory cytokines and biochemical profiles were also obtained. Our results showed that the diclofenac nanocapsule DIC-LNCs were able to reduce arthritis compared with the control group and the DIC group. DIC-LNCs efficiently reduced proinflammatory cytokines, C-reactive protein, and xanthine oxidase levels. Additionally, DIC-LNCs reduced the loss of synoviocytes and chondrocytes compared with the DIC (p < 0.05) and control groups (p < 0.05). These data suggest that DIC-LNCs have anti-arthritic activity and preserve joint components, making them promising for clinical use.

Evaluation of an Efficient and Skin-Adherent Semisolid Sunscreen Nanoformulation.

INTRODUCTION: Sunscreens are substances applied on the skin surface to protect the skin from the harmful effects of UV light. Nanoparticles can increase the retention time of the sunscreen on the skin surface and its efficacy, by acting as physical barriers. The present investigation aimed to evaluate the influence of the chitosan coating of benzophenone-3-loaded lipid-core nanocapsules (CH-LCN) on the skin adhesion and photoprotective effect of the sunscreen. METHODS: CH-LNC were obtained by the interfacial deposition of preformed polymer. A suitable semisolid formulation was obtained by using hydroxyethyl cellulose as the gel-forming polymer. Skin adhesion experiments were performed in vitro by applying the formulation on porcine skin and keeping it under water at 32 °C for up to 60 min. Photoprotective effect was analyzed in vitro by the capacity of the formulations to protect a photo unstable substance (resveratrol) from degradation under UV light. RESULTS: CH-LNC presented size of around 150 nm, with low polydispersity, positive zeta potential, due to chitosan, and benzophenone-3 encapsulation efficiency of close to 100% (3 mg/mL). The proposed gel presented suitable consistence and pH for skin application and benzophenone-3 concentration of around 3 mg/g. Although coated and uncoated lipid-core nanocapsules increased benzophenone-3 skin adhesion after 10 min of water immersion, only the nanoparticles coated with chitosan were able to do so after 60 min. The chitosan coating of the nanocapsules increased the photoprotection of the sunscreen under UVA and UVB light after 60 min of exposure, probably due to the film-forming properties of chitosan. CONCLUSION: The chitosan coating of CH-LCN increased the skin adhesion and the photoprotective effect of the sunscreen.

Folic Acid-Doxorubicin-Double-Functionalized-Lipid-Core Nanocapsules: Synthesis, Chemical Structure Elucidation, and Cytotoxicity Evaluation on Ovarian (OVCAR-3) and Bladder (T24) Cancer Cell Lines.

PURPOSE: Folic acid-doxorubicin-double-functionalized-lipid-core nanocapsules (LNC-CS-L-Zn+2-DOX-FA) were prepared, characterized, and evaluated in vitro against ovarian and bladder cancer cell lines (OVCAR-3 and T24). METHODS: LNC-CS-L-Zn+2-DOX-FA was prepared by self-assembly and interfacial reactions, and characterized using liquid chromatography, particle sizing, transmission electron microscopy, and infrared spectroscopy. Cell viability and cellular uptake were studied using MTT assay and confocal microscopy. RESULTS: The presence of lecithin allows the formation of nanocapsules with a lower tendency of agglomeration, narrower size distributions, and smaller diameters due to an increase in hydrogen bonds at the surface. LNC-L-CS-Zn+2-DOX-FA, containing 98.00 ± 2.34 µg mL-1 of DOX and 105.00 ± 2.05 µg mL-1 of FA, had a mean diameter of 123 ± 4 nm and zeta potential of +12.0 ± 1.3 mV. After treatment with LNC-L-CS-Zn+2-DOX-FA (15 µmol L-1 of DOX), T24 cells had inhibition rates above 80% (24 h) and 90% (48 h), whereas OVCAR-3 cells showed inhibition rates of 68% (24 h) and 93% (48 h), showing higher cytotoxicity than DOX.HCl. The fluorescent-labeled formulation showed a higher capacity of internalization in OVCAR-3 compared to T24 cancer cells. CONCLUSION: Lecithin favored the increase of hydrogen bonds at the surface, leading to a lower tendency of agglomeration for nanocapsules. LNC-CS-L-Zn+2-DOX-FA is a promising therapeutic agent against tumor-overexpressing folate receptors.

Organic Nanocarriers for Bevacizumab Delivery: An Overview of Development, Characterization and Applications.

Bevacizumab (BCZ) is a recombinant humanized monoclonal antibody against the vascular endothelial growth factor, which is involved in the angiogenesis process. Pathologic angiogenesis is observed in several diseases including ophthalmic disorders and cancer. The multiple administrations of BCZ can cause adverse effects. In this way, the development of controlled release systems for BCZ delivery can promote the modification of drug pharmacokinetics and, consequently, decrease the dose, toxicity, and cost due to improved efficacy. This review highlights BCZ formulated in organic nanoparticles providing an overview of the physicochemical characterization and in vitro and in vivo biological evaluations. Moreover, the main advantages and limitations of the different approaches are discussed. Despite difficulties in working with antibodies, those nanocarriers provided advantages in BCZ protection against degradation guaranteeing bioactivity maintenance.

Chitosan-Coated Lipid-Core Nanocapsules Functionalized with Gold-III and Bevacizumab Induced In Vitro Cytotoxicity against C6 Cell Line and In Vivo Potent Antiangiogenic Activity.

PURPOSE: Bevacizumab (BCZ) is a recombinant monoclonal antibody that inhibits the biological activity of the vascular endothelial growth factor, which has an important role in angiogenesis for tumoral growth and progression. In this way, our objective was to develop chitosan-coated lipid-core nanocapsules functionalized with BCZ by an organometallic complex using gold-III. METHODS: The formulation was produced and characterized in relation to physicochemical characteristics. Furthermore, the antitumoral and antiangiogenic activities were evaluated against C6 glioma cell line and chicken embryo chorioallantoic membrane (CAM), respectively. RESULTS: Final formulation showed nanometric size, narrow polydispersity, positive zeta potential and gold clusters size lower than 2 nm. BCZ in aqueous solution (0.01-0.10 µmol L-1) did not show cytotoxic activity in vitro against C6 glioma cell line; although, MLNC-Au-BCZ showed cytotoxicity with a median inhibition concentration of 30 nmol L-1 of BCZ. Moreover, MLNC-Au-BCZ demonstrated cellular internalization dependent on incubation time and BCZ concentration. BCZ solution did not induce significant apoptosis as compared to MLNC-Au-BCZ within 24 h of treatment. CAM assay evidenced potent antiangiogenic activity for MLNC-Au-BCZ, representing a decrease of 5.6 times in BCZ dose comparing to BCZ solution. CONCLUSION: MLNC-Au-BCZ is a promising product for the treatment of solid tumors.

Encapsulation in lipid-core nanocapsules improves topical treatment with the potent antileishmanial compound CH8.

Cutaneous leishmaniasis (CL) is a neglected parasitic disease conventionally treated by multiple injections with systemically toxic drugs. Aiming at a more acceptable therapy, we developed lipid-core nanocapsules (LNCs) entrapping the potent antileishmanial chalcone (CH8) for topical application. Rhodamine-labeled LNC (Rho-LNC-CH8) was produced for imaging studies. LNC-CH8 and Rho-LNC-CH8 had narrow size distributions (polydispersity index <0.10), with similar mean sizes (~180 nm) by dynamic light scattering. In vitro, Rho-LNC-CH8 was rapidly internalized by extracellular Leishmania amazonensis parasites macrophages in less than 15 min. LNC-CH8 activated macrophage oxidative mechanisms more efficiently than CH8, and was more selectively toxic against the intracellular parasites. In vivo, topically applied Rho-LNC-CH8 efficiently permeated mouse skin. In L. amazonensis-infected mice, LNC-CH8 reduced the parasite load by 86% after three weeks of daily topical treatment, while free CH8 was ineffective. In conclusion, LNC-CH8 has strong potential as a novel topical formulation for CL treatment.

Erlotinib-Loaded Poly(ε-Caprolactone) Nanocapsules Improve In Vitro Cytotoxicity and Anticlonogenic Effects on Human A549 Lung Cancer Cells.

Lung cancer is the most frequent type of cancer and the leading cause of cancer-related mortality worldwide. This study aimed to develop erlotinib (ELB)-loaded poly(ε-caprolactone) nanocapsules (NCELB) and evaluated their in vitro cytotoxicity in A549 cells. The formulation was characterized in relation to hydrodynamic diameter (171 nm), polydispersity index (0.076), zeta potential (- 8 mV), drug content (0.5 mg.mL-1), encapsulation efficiency (99%), and pH (6.0). NCELB presented higher cytotoxicity than ELB in solution against A549 cells in the MTT and LIVE/DEAD cell viability assays after 24 h of treatment. The main mechanism of cytotoxicity of NCELB was the induction of apoptosis in A549 cells. Further, a significant decrease in A549 colony formation was verified after NCELB treatment in comparison with the unencapsulated drug treatment. The reduction in clonogenic capacity is very relevant as it can reduce the risk of tumor recurrence and metastasis. In conclusion, erlotinib-loaded PCL nanocapsules are promising nanoparticles carriers to increase the efficacy of ELB in lung cancer treatment.

(-)-linalool-Loaded Polymeric Nanocapsules Are a Potential Candidate to Fibromyalgia Treatment.

Fibromyalgia (FM) is a chronic disease that has as main characteristic generalized musculoskeletal pain, which can cause physical and emotional problems to patients. However, pharmacological therapies show side effects that hamper the adhesion to treatment. Given this, (-)-linalool (LIN), a monoterpene with several therapeutic properties already reported in scientific literature as anti-depressive, antinociceptive, anti-inflammatory, and antihyperalgesic also demonstrated therapeutic potential in the treatment of FM. Nevertheless, physicochemical limitations as high volatilization and poor water-solubility make its use difficult. In this perspective, this present research had performed the incorporation of LIN into polymeric nanocapsules (LIN-NC). Size, morphology, encapsulation efficiency, cytotoxicity, and drug release were performed. The antihyperalgesic effect of LIN-NC was evaluated by a chronic non-inflammatory muscle pain model. The results demonstrated that the polymeric nanocapsules showed particle size of 199.1 ± 0.7 nm with a PDI measurement of 0.13 ± 0.01. The drug content and encapsulation efficiency were 13.78 ± 0.05 mg/mL and 80.98 ± 0.003%, respectively. The formulation did not show cytotoxicity on J774 macrophages. The oral treatment with LIN-NC and free-LIN increased the mechanical withdrawal threshold on all days of treatment in comparison with the control group. In conclusion, LIN-NC is a promising proposal in the development of phytotherapy-based nanoformulations for future clinical applications.

Redispersible Spray-Dried Powder Containing Nanoencapsulated Curcumin: the Drying Process Does Not Affect Neuroprotection In vitro.

A redispersible spray-dried formulation containing curcumin-loaded, lipid-core nanocapsules (LNC-C) was developed for oral administration. The neuroprotective activity of curcumin after the spray-drying process was evaluated in vitro. The spray-dried powder (SD-LNC-C) was produced using a drying adjuvant composed of a blend of maltodextrin and L-leucine (90:10 w/w). Acceptable process yield (~ 70%) and drug content (6.5 ± 0.2 mg g-1) were obtained. SD-LNC-C was formed by smooth, spherical-shaped particles, and confocal Raman analysis indicated the distribution of the LNC-C on the surface of the leucine/maltodextrin agglomerates. The surface of the agglomerates was formed by a combination of LNC-C and adjuvants, and laser diffraction showed that SD-LNC-C had adequate aqueous redispersion, with no loss of controlled drug release behaviour of LNC-C. The in vitro curcumin activity against the lipopolysaccharide (LPS)-induced proinflammatory response in organotypic hippocampal slice cultures was evaluated. Both formulations (LNC-C and SD-LNC-C) reduced TNF-α to similar levels. Therefore, neuroprotection of curcumin in vitro may be improved by nanoencapsulation followed by spray-drying, with no loss of this superior performance. Hence, the redispersible spray-dried powder proposed here represents a suitable approach for the development of innovative nanomedicines containing curcumin for the prevention/treatment of neurodegenerative diseases.

Redispersible spray-dried lipid-core nanocapsules intended for oral delivery: the influence of the particle number on redispersibility.

This study proposes a new approach to produce easily redispersible spray-dried lipid-core nanocapsules (LNC) intended for oral administration, evaluating the influence of the particle number density of the fed sample. The proposed approach to develop redispersible spray-dried LNC formulations intended for oral route is innovative, evidencing the needing of an optimization of the initial particle number density in the liquid suspension of nanocapsules. A mixture of maltodextrin and L-leucine (90:10 w/w) was used as drying adjuvant. Dynamic light scattering, turbidimetry, determination of surface area and pore size distribution, electron microscopy and confocal Raman microscopy (CRM) were used to characterize the proposed system and to better understand the differences in the redispersion behavior. An easily aqueous redispersion of the spray-dried powder composed of maltodextrin and L-leucine (90:10 w/w) was obtained, depending on the particle number density. Their surface area decreased in the presence of LNC. CRM enabled the visualization of the spatial distribution of the different compounds in the powders affording to better understand the influence of the particle number density of the fed sample on their redispersion behavior. This study shows the need for optimizing initial particle number density in the liquid formulation to develop redispersible spray-dried LNC powders.

Mucoadhesive Properties of Eudragit®RS100, Eudragit®S100, and Poly(ε-caprolactone) Nanocapsules: Influence of the Vehicle and the Mucosal Surface.

The use of polymers as mucoadhesive materials has been explored in several drug delivery systems. It is well known that the resulting mucoadhesiveness not only depends on the polymers by themselves, but also on the way they are delivered and on the application target. However, little attention has been given to the combined effect of such characteristics. Therefore, the objective of this study is to analyze the mucoadhesion resulting from combined effects of nanocapsules produced with polymers of different ionic properties, Eudragit®RS100, Eudragit®S100, or poly(ε-caprolactone), when they are incorporated into different vehicles (suspension, hydrogel, and powder) and applied on different mucosal surfaces (mucin, porcine vaginal, and buccal mucosa). Mucoadhesion was measured by a tensile stress tester. Our findings show that polymeric self-assembling as nanocapsules improved the mucoadhesion of the polymers. Eudragit®RS100 nanocapsules have the best performance, independently of the vehicle and surface used. Regarding the vehicle, hydrogels showed higher adhesion when compared to suspensions and powders. When considering different types of surfaces, mucin presented a similar pattern like the animal mucosa, but it overestimated the mucoadhesiveness of all formulations. In conclusion, this study demonstrated that the best strategy to achieve high mucoadhesive formulations is by incorporating Eudragit®RS100 nanocapsules in hydrogels. Moreover, mucin is a suitable substrate to compare and screen different formulations but not as a conclusive estimation of the mucoadhesion values that can be achieved. These results are summarized in a decision tree that can help to understand different strategies of combination of these factors and the expected outcomes.

Stability of doripenem in reconstituted solution - thermal and oxidative decomposition kinetics and degradation products by LC-MS.

A ultra-fast liquid chromatography method applied to quantitation of doripenem in powder for injection was validated. Validation parameters were assayed and a rapid analysis was established by a reversed-phase system comprising a C18 column endcapped (50 × 4.0 mm, 2.0 µm), mobile phase consisting of phosphoric acid 0.01% (pH 3.8) and acetonitrile (98:02, v/v) and a flow rate of 0.4 mL min-1 . Drug stability was studied through submission to forced conditions, allowing the major degradation products to be detected and the kinetics parameters to be established. Thermal and oxidative degradation were determined, and indicated a kinetic decomposition following first and second order, respectively. The main degradation products were identified by LC-MS analysis, and the results were evaluated in order to suggest the chemical structures corresponding to respective masses and fragmentations. Six compounds were identified, with m/z 411, 427, 437, 634, 650 and 664. All of them resulted from cleavage of ß-lactam ring and alcoholic chain and/or dimerization. These experimental results provide valuable information about the stability of doripenem reconstituted solution and procedures for its handling and storage.

Effect of indomethacin-loaded nanocapsules incorporation in a dentin adhesive resin.

OBJECTIVES: The aim of this study was to produce indomethacin-loaded nanocapsules (IndOH-NCs) and evaluate the influence of their incorporation into an adhesive resin. MATERIALS AND METHODS: Indomethacin was encapsulated by the deposition of preformed polymer. IndOH-NCs were characterized by laser diffractometry, Fourier transformed infrared spectrometry, transmission electron microscopy (TEM), scanning electron microscopy, high-performance liquid chromatography (HPLC), and MTT assay. Nanocapsules (NCs) were incorporated into an adhesive in concentrations of 1, 2, 5, and 10 %. The addition was visualized by TEM and drug release was evaluated by HPLC until 120 h of immersion in simulated body fluid (SBF). Drug diffusion through dentin was tested using a Franz diffusion cell apparatus and quantified by HPLC. The degree of conversion (DC), softening in ethanol, and microtensile bond strength (µTBS) were evaluated to determine whether the nanocapsules influenced the adhesive. Data were analyzed using one-way ANOVA and Tukey's post hoc test for DC, softening in ethanol, µTBS, and cytotoxicity, and paired t test for comparison between the initial and final Knoop microhardness. RESULTS: IndOH-NCs, with a spherical shape and a mean diameter of 165 nm, were incorporated into an adhesive. Indomethacin content was 7 mg drug/g powder. IndOH-NCs maintained high cell viability. At 120 h, an amount of 13.83 % of indomethacin was released, and after 7 days, 7.07 % of this drug was diffused through dentin for an adhesive containing 10 % of nanocapsules. No alteration in the DC, softening in ethanol, and µTBS resulted from NC addition. CONCLUSIONS: IndOH-NCs may be incorporated into adhesive systems, without compromising properties, to add an anti-inflammatory drug controlled release for restorative procedures in deep cavities. CLINICAL SIGNIFICANCE: Here is the first step toward the goal of providing agents to act at an inflammatory process of pulp tissue through dental adhesives via encapsulation of drug.

Cationic Polymeric Nanocapsules as a Strategy to Target Dexamethasone to Viable Epidermis: Skin Penetration and Permeation Studies.

The present work aimed to evaluate the behavior of dexamethasone-loaded cationic polymericnanocapsules in hydrogels, regarding their in vitro drug release and skin drug retention and per- meation. Cationic polymeric nanocapsules prepared with Eudragit RS 100 as the polymeric wall had mean particle size of 139 +/- 3.6 nm, positive zeta potential (+11.38 +/- 1.7 mV), and high encapsulation efficiency (81 +/- 2%). After preparation, they were formulated as hydrogels, which showed non-Newtonian, plastic behavior, and acidic pH. Photon correlation spectroscopy analysis of these hydrogels demonstrated the presence of particles with mean particle size close to that of the original colloidal suspensions. The presence of dexamethasone-loaded nanocapsules in hydrogels promoted controlled drug release and an increase in the amount of drug delivered into viable epidermis, the main target tissue to topical glucocorticoid action. Moreover, the formulation did not increase the risk of drug penetration to dermis and permeation to the receptor compartment.

Laronidase-functionalized multiple-wall lipid-core nanocapsules: promising formulation for a more effective treatment of mucopolysaccharidosis type I.

PURPOSE: Mucopolysaccharidosis I is a genetic disorder caused by alpha-L-iduronidase deficiency. Its primary treatment is enzyme replacement therapy (ERT), which has limitations such as a high cost and a need for repeated infusions over the patient's lifetime. Considering that nanotechnological approaches may enhance enzyme delivery to organs and can reduce the dosage thereby enhancing ERT efficiency and/or reducing its cost, we synthesized laronidase surface-functionalized lipid-core nanocapsules (L-MLNC). METHODS: L-MLNCs were synthesized by using a metal complex. Size distributions were evaluated by laser diffraction and dynamic light scattering. The kinetic properties, cytotoxicity, cell uptake mechanisms, clearance profile and biodistribution were evaluated. RESULTS: Size distributions showed a D[4,3] of 134 nm and a z-average diameter of 71 nm. L-MLNC enhanced the Vmax and Kcat in comparison with laronidase. L-MLNC is not cytotoxic, and nanocapsule uptake by active transport is not only mediated by mannose-6-phosphate receptors. The clearance profile is better for L-MLNC than for laronidase. A biodistribution analysis showed enhanced enzyme activity in different organs within 4 h and 24 h for L-MLNC. CONCLUSIONS: The use of lipid-core nanocapsules as building blocks to synthesize surface-functionalized nanocapsules represents a new platform for producing decorated soft nanoparticles that are able to modify drug biodistribution.

Nanoencapsulation of Clobetasol Propionate Decreases Its Penetration to Skin Layers Without Changing Its Relative Skin Distribution.

An immunosuppressive effect with drug release control and higher NTPDase activity in the treatment of contact dermatitis was previously reported for a hydrogel containing 0.05% clobetasol propionate-loaded lipid-core nanocapsules (HG-LNC-CP) compared to a hydrogel containing the non-encapsulated drug (HG-CP). In order to investigate the factors underlying this different performance, we evaluated the in vitro skin permeation/penetration of CP from both formulations (HG-LNC-CP and HG-CP). CP did not permeate to the receptor medium during the experiment (24 h), but penetrated into the stratum corneum and viable skin (epidermis and dermis) in significant amounts after 24 h, regardless the type of the formulation. Comparing both formulations, although the relative amount of CP in each skin layer was not affected by the nanoencapsulation, HG-LNC-CP was able to reduce in 5.8, 6.9 and 3.7 times the amount of CP released into the stratum corneum, epidermis and dermis respectively. In this way, the higher effect of HG-LNC-CP previously observed could be due to the controlled drug penetration rate into the skin layers. Moreover, HG-LNC-CP reduces the chances of the corticosteroid to be absorbed systemically as the amount of CP reaching the dermis was reduced. The study reinforces the HG-LNC-CP as a promising dermatological nanomedicine for the treatment of skin disorders.

Ultraviolet A irradiation increases the permeation of fullerenes into human and porcine skin from C60-poly(vinylpyrrolidone) aggregate dispersions.

AIM: The purpose of this study was to characterise C60-poly(vinylpyrrolidone) (PVP) dispersions, to analyse the cutaneous absorption of fullerenes as well as to evaluate whether UVA radiation (UVA-R) could modify its permeation profile. METHODS: Dispersions were characterised according to their pH, particle size, zeta potential, and morphology. Skin absorption studies were performed using porcine or human skin under UVA or sham irradiation. RESULTS: The C60 aggregate size was 129 ± 54 nm (as determined by nanoparticle tracking analysis) and the zeta potential was -4.93 ± 1.72 mV. The C60 aggregates presented an irregular shape (as measured by transmission electron microscopy) and permeated through human and porcine skin. CONCLUSIONS: C60-PVP aggregates were adequately characterised. Human skin was less permeable than porcine skin, and the presence of UVA-R increased the C60 content up to the dermis.

Development of Novel Chitosan Microcapsules for Pulmonary Delivery of Dapsone: Characterization, Aerosol Performance, and In Vivo Toxicity Evaluation.

Pneumocystis carinii pneumonia (PCP) is a major opportunistic infection that affects patients with human immunodeficiency virus. Although orally administered dapsone leads to high hepatic metabolism, decreasing the therapeutic index and causing severe side effects, this drug is an effective alternative for the treatment of PCP. In this context, microencapsulation for pulmonary administration can offer an alternative to increase the bioavailability of dapsone, reducing its adverse effects. The aim of this work was to develop novel dapsone-loaded chitosan microcapsules intended for deep-lung aerosolized drug delivery. The geometric particle size (D 4,3) was approximately 7 µm, the calculated aerodynamic diameter (d aero) was approximately 4.5 µm, and the mass median aerodynamic diameter from an Andersen cascade impactor was 4.7 µm. The in vitro dissolution profile showed an efficient dapsone encapsulation, demonstrating the sustained release of the drug. The in vitro deposition (measured by the Andersen cascade impactor) showed an adequate distribution and a high fine particles fraction (FPF = 50%). Scanning electron microscopy of the pulmonary tissues demonstrated an adequate deposition of these particles in the deepest part of the lung. An in vivo toxicity experiment showed the low toxicity of the drug-loaded microcapsules, indicating a protective effect of the microencapsulation process when the particles are microencapsulated. In conclusion, the pulmonary administration of the novel dapsone-loaded microcapsules could be a promising alternative for PCP treatment.