Thermal Stability and Heat Transfer of Polyurethanes for Joints Applications of Wooden Structures.

Wood characterized by desired mechanical properties and wood joining material is essential for creating wooden structures. The polymer adhesives are suitable for such applications due to the possibility of energy dissipation from stresses generated by wooden structures and the elimination of thermal bridging, which are common problems in metal joining materials. This research focuses on the thermophysical properties of the laboratory-prepared flexible and rigid polyurethanes to select an appropriate polymer adhesive. Our results showed that the highest thermal stability was in the case of the new PSTF-S adhesive, which reached 230 °C, but the lowest mass loss in the air environment was around 54% for the PS material. The mean thermal expansion coefficient for F&R PU adhesives was 124-164∙10-6 K-1. The thermal diffusivity of examined adhesives varied between 0.100 and 0.180 mm2s-1. The thermal conductivity, depending on the type of polyurethane, was in the 0.13-0.29 W∙m-1∙K-1 range. The relative decrease in thermal diffusivity after heating the adhesives to 150 °C was from 2% for materials with the lowest diffusivity to 23% for the PU with the highest value of heat transfer. It was found that such data can be used to simulate wooden construction joints in future research.

Stabilization of Fish Protein-Based Adhesive by Reduction of Its Hygroscopicity.

Protein-based fish adhesives have historically been used in various bonding applications; however, due to the protein's high affinity for water absorption, these adhesives become destabilized in high-moisture environments, resulting in reduced bondline strength and early failure. This limitation makes them unsuitable for industrial applications with higher demands. To address this issue, water-insoluble raw powder materials such as iron, copper, or zeolite were incorporated into natural fish adhesives. In this study, the hygroscopicity, dry matter content, thermal analysis (TGA/DSC), FT-IR spectroscopy, surface tension measurements, vapour permeability, and scanning electron microscope (SEM) of the modified adhesives were determined. In addition, the bonding properties of the modified adhesives were evaluated by the tensile shear strength of the lap joints, and mould growth was visually inspected. The resulting modified protein-based adhesives demonstrated improved stability in high humidity environments. Enhancing the hygroscopic properties of protein-based fish adhesives has the potential to unlock new opportunities and applications, providing a healthier and more environmentally sustainable alternative to petroleum-based adhesives.

Improved Synthetic Route of Incorporation of Nanosilicon Species into Phenol-Formaldehyde Resin and Preparation of Novel ZnAl-Layered Double-Hydroxide Hybrid Phenol-Formaldehyde Resin.

Hybrid phenol-formaldehyde (PF) resins represent one of the most important niche groups of binding systems for composites. New industrial needs, environmental requirements, and price fluctuations have led to further research on materials with enhanced mechanical and thermal properties. The preparation of novel hybrid materials can be achieved by inclusion of various elements or functional groups in the organic polymer phenolic framework. Herein, we report the synthesis and characterization of a PF-based hybrid material with different nanoscale silicone species and ZnAl-layered double hydroxide (LDH). The main goals of this study were to improve the synthetic pathways of hybrid resin, as well as to prepare granulated composite materials and test samples and determine their characterization. Added inorganic species increased the glass-transition temperature by a minimum of 8 °C, which was determined using differential scanning calorimetry (DSC). Rheological properties (melting viscosity and flow distance) of the hybrid resin were measured. The homogeneity of distribution of added species across the organic matrix was evaluated with scanning electron microscopy (SEM). With synthesized new hybrid-binding systems, we prepared different granulated composite materials and evaluated them with the measurements of rheological properties (flow curing characteristics). Tensile strength of samples, prepared from granulated composite material, improved by more than 5%.

Innovative Calcium Carbonate-Based Products to Repair Cracked Cement Mortars.

The durability of Portland cement mortars is often affected by environmental factors, which can cause physicochemical and mechanical degradation processes. In this study, the performance of three products, calcium acetoacetate and calcium tetrahydrofurfuryloxide dissolved in two different solvents developed and tested as stone consolidants, was evaluated in terms of crack filling or sealing and consolidation. Realistic cracks were induced in quasibrittle cement mortar prisms using a custom-designed test rig. The effectiveness and the performance of the considered treatments, investigated on specimens, were evaluated by optical and scanning electron microscopy, colourimetry, water absorption rate, ultrasonic pulse velocity, and surface hardness measurements. Results revealed that, in the examined conditions, the products were more suitable as surface consolidants than as crack fillers.

Efficiency of Novel Photocatalytic Coating and Consolidants for Protection of Valuable Mineral Substrates.

In the process of protection and consolidation of valuable materials, the efficiency is the crucial property that needs to be considered. TiO2/ZnAl layered double hydroxide (LDH) coating and silicate- and carbonate-based consolidants were synthesized and proposed to be used for protection and consolidation of four porous mineral substrates: brick, stone, render and mortar. The photocatalytic efficiency of TiO2/ZnAl LDH coating, as well as consolidation efficiency of two consolidants, both applied on model substrates, were studied. The photocatalytic coating showed significant activity and performed well after the durability tests involving rinsing and freezing/thawing procedures. After treatment with both consolidants, a serious enhancement of consolidation of the used substrates was found. On the other hand, the application of TiO2/ZnAl LDH, as well as consolidants, caused negligible changes in the water vapour permeability values and in appearance of the porous mineral substrates, indicating a high level of compatibility.