Chemically coupling SnO2 quantum dots and MXene for efficient CO2 electroreduction to formate and Zn-CO2 battery.

Electrochemical conversion of CO2 into formate is a promising strategy for mitigating the energy and environmental crisis, but simultaneously achieving high selectivity and activity of electrocatalysts remains challenging. Here, we report low-dimensional SnO2 quantum dots chemically coupled with ultrathin Ti3C2Tx MXene nanosheets (SnO2/MXene) that boost the CO2 conversion. The coupling structure is well visualized and verified by high-resolution electron tomography together with nanoscale scanning transmission X-ray microscopy and ptychography imaging. The catalyst achieves a large partial current density of -57.8 mA cm-2 and high Faradaic efficiency of 94% for formate formation. Additionally, the SnO2/MXene cathode shows excellent Zn-CO2 battery performance, with a maximum power density of 4.28 mW cm-2, an open-circuit voltage of 0.83 V, and superior rechargeability of 60 h. In situ X-ray absorption spectroscopy analysis and first-principles calculations reveal that this remarkable performance is attributed to the unique and stable structure of the SnO2/MXene, which can significantly reduce the reaction energy of CO2 hydrogenation to formate by increasing the surface coverage of adsorbed hydrogen.

Interrogation of 3d Transition Bimetallic Nanocrystal Nucleation and Growth Using In Situ Electron Microscope and Synchrotron X-ray Techniques.

Understanding the nucleation and growth mechanism of 3d transition bimetallic nanocrystals (NCs) is crucial to developing NCs with tailored nanostructures and properties. However, it remains a significant challenge due to the complexity of 3d bimetallic NCs formation and their sensitivity to oxygen. Here, by combining in situ electron microscopy and synchrotron X-ray techniques, we elucidate the nucleation and growth pathways of Fe-Ni NCs. Interestingly, the formation of Fe-Ni NCs emerges from the assimilation of Fe into Ni clusters together with the reduction of Fe-Ni oxides. Subsequently, these NCs undergo solid-state phase transitions, resulting in two distinct solid solutions, ultimately dominated by γ-Fe3Ni2. Furthermore, we deconvolve the interplays between local coordination and electronic state concerning the growth temperature. We directly visualize the oxidation-state distributions of Fe and Ni at the nanoscale and investigate their changes. This work may reshape and enhance the understanding of nucleation and growth in atomic crystallization.

A single-atom library for guided monometallic and concentration-complex multimetallic designs.

Atomically dispersed single-atom catalysts have the potential to bridge heterogeneous and homogeneous catalysis. Dozens of single-atom catalysts have been developed, and they exhibit notable catalytic activity and selectivity that are not achievable on metal surfaces. Although promising, there is limited knowledge about the boundaries for the monometallic single-atom phase space, not to mention multimetallic phase spaces. Here, single-atom catalysts based on 37 monometallic elements are synthesized using a dissolution-and-carbonization method, characterized and analysed to build the largest reported library of single-atom catalysts. In conjunction with in situ studies, we uncover unified principles on the oxidation state, coordination number, bond length, coordination element and metal loading of single atoms to guide the design of single-atom catalysts with atomically dispersed atoms anchored on N-doped carbon. We utilize the library to open up complex multimetallic phase spaces for single-atom catalysts and demonstrate that there is no fundamental limit on using single-atom anchor sites as structural units to assemble concentration-complex single-atom catalyst materials with up to 12 different elements. Our work offers a single-atom library spanning from monometallic to concentration-complex multimetallic materials for the rational design of single-atom catalysts.

Spin-Polarized Photocatalytic CO2 Reduction of Mn-Doped Perovskite Nanoplates.

"Spin" has been recently reported as an important degree of electronic freedom to improve the performance of electrocatalysts and photocatalysts. This work demonstrates the manipulations of spin-polarized electrons in CsPbBr3 halide perovskite nanoplates (NPLs) to boost the photocatalytic CO2 reduction reaction (CO2RR) efficiencies by doping manganese cations (Mn2+) and applying an external magnetic field. Mn-doped CsPbBr3 (Mn-CsPbBr3) NPLs exhibit an outstanding photocatalytic CO2RR compared to pristine CsPbBr3 NPLs due to creating spin-polarized electrons after Mn doping. Notably, the photocatalytic CO2RR of Mn-CsPbBr3 NPLs is significantly enhanced by applying an external magnetic field. Mn-CsPbBr3 NPLs exhibit 5.7 times improved performance of photocatalytic CO2RR under a magnetic field of 300 mT with a permanent magnet compared to pristine CsPbBr3 NPLs. The corresponding mechanism is systematically investigated by magnetic circular dichroism spectroscopy, ultrafast transient absorption spectroscopy, and density functional theory simulation. The origin of enhanced photocatalytic CO2RR efficiencies of Mn-CsPbBr3 NPLs is due to the increased number of spin-polarized photoexcited carriers by synergistic doping of the magnetic elements and applying a magnetic field, resulting in prolonged carrier lifetime and suppressed charge recombination. Our result shows that manipulating spin-polarized electrons in photocatalytic semiconductors provides an effective strategy to boost photocatalytic CO2RR efficiencies.

Bandgap Shrinkage and Charge Transfer in 2D Layered SnS2 Doped with V for Photocatalytic Efficiency Improvement.

Effects of electronic and atomic structures of V-doped 2D layered SnS2 are studied using X-ray spectroscopy for the development of photocatalytic/photovoltaic applications. Extended X-ray absorption fine structure measurements at V K-edge reveal the presence of VO and VS bonds which form the intercalation of tetrahedral OVS sites in the van der Waals (vdW) gap of SnS2 layers. X-ray absorption near-edge structure (XANES) reveals not only valence state of V dopant in SnS2 is ≈4+ but also the charge transfer (CT) from V to ligands, supported by V Lα,ß resonant inelastic X-ray scattering. These results suggest V doping produces extra interlayer covalent interactions and additional conducting channels, which increase the electronic conductivity and CT. This gives rapid transport of photo-excited electrons and effective carrier separation in layered SnS2 . Additionally, valence-band photoemission spectra and S K-edge XANES indicate that the density of states near/at valence-band maximum is shifted to lower binding energy in V-doped SnS2 compare to pristine SnS2 and exhibits band gap shrinkage. These findings support first-principles density functional theory calculations of the interstitially tetrahedral OVS site intercalated in the vdW gap, highlighting the CT from V to ligands in V-doped SnS2 .

Tracking the Chemical and Structural Evolution of the TiS2 Electrode in the Lithium-Ion Cell Using Operando X-ray Absorption Spectroscopy.

As the lightest and cheapest transition metal dichalcogenide, TiS2 possesses great potential as an electrode material for lithium batteries due to the advantages of high energy density storage capability, fast ion diffusion rate, and low volume expansion. Despite the extensive investigation of its electrochemical properties, the fundamental discharge-charge reaction mechanism of the TiS2 electrode is still elusive. Here, by a combination of ex situ and operando X-ray absorption spectroscopy with density functional theory calculations, we have clearly elucidated the evolution of the structural and chemical properties of TiS2 during the discharge-charge processes. The lithium intercalation reaction is highly reversible and both Ti and sulfur are involved in the redox reaction during the discharge and charge processes. In contrast, the conversion reaction of TiS2 is partially reversible in the first cycle. However, Ti-O related compounds are developed during electrochemical cycling over extended cycles, which results in the decrease of the conversion reaction reversibility and the rapid capacity fading. In addition, the solid electrolyte interphase formed on the electrode surface is found to be highly dynamic in the initial cycles and then gradually becomes more stable upon further cycling. Such understanding is important for the future design and optimization of TiS2 based electrodes for lithium batteries.

Optimization of Magnetic Behaviors of Au-NP-Decorated MWCNTs and Reduced Graphene Oxide for Biomedical Applications.

Optimization of electronic/magnetic behaviors of chemically decorated diamagnetic noble-metal gold nanoparticles (Au-NPs ≈5 at. %) on multiwalled carbon nanotubes (MWCNTs) and reduced graphene oxide (r-GO) is studied for future uses of optoelectronic/magnetic and biomedical applications. The changes between Au 4f5/2 and Au 4f7/2 ≈ 3.7 eV in X-ray photoelectron spectroscopy and 1.1 (±0.3) eV shifts in the C K-edge in X-ray absorption near edge structure spectroscopy confirm that the reduced form of Au0 was present in the Au-NP-decorated nanocomposites. The potential difference (ΔV) is built due to charge creations at the interface of r-GO/MWCNTs and Au-NPs and shifts in the Fermi level (ΔE F) due to electronic transfer effects, and as a result, the work functions are reduced from 3.2 eV (MWCNTs) to 3.0 eV (MWCNTs:Au-NPs) and 3.1 (r-GO) to 2.8 eV (r-GO:Au-NPS), respectively. Negligible remanence/coercivity in MWCNTs/r-GO (/Au-NPs) with blocking temperature ≈300 K in MWCNTs:Au-NPs accounted for the existence of diamagnetic Au-NPs in these nanocomposites, which implies a superparamagnetic nature. These results furnish the evidence about the optimization of magnetic behaviors of r-GO/MWCNTs (/Au-NPs) that may possibly be altered as a novel contrast agent for clinical magnetic resonance imaging, drug delivery, and hyperthermia applications.

Size-dependent dissociation of carbon monoxide on cobalt nanoparticles.

In situ soft X-ray absorption spectroscopy (XAS) was employed to study the adsorption and dissociation of carbon monoxide molecules on cobalt nanoparticles with sizes ranging from 4 to 15 nm. The majority of CO molecules adsorb molecularly on the surface of the nanoparticles, but some undergo dissociative adsorption, leading to oxide species on the surface of the nanoparticles. We found that the tendency of CO to undergo dissociation depends critically on the size of the Co nanoparticles. Indeed, CO molecules dissociate much more efficiently on the larger nanoparticles (15 nm) than on the smaller particles (4 nm). We further observed a strong increase in the dissociation rate of adsorbed CO upon exposure to hydrogen, clearly demonstrating that the CO dissociation on cobalt nanoparticles is assisted by hydrogen. Our results suggest that the ability of cobalt nanoparticles to dissociate hydrogen is the main parameter determining the reactivity of cobalt nanoparticles in Fischer-Tropsch synthesis.

Disordered Au Nanoclusters for Efficient Ammonia Electrosynthesis.

The electrochemical nitrogen (N2 ) reduction reaction (N2 RR) under mild conditions is a promising and environmentally friendly alternative to the traditional Haber-Bosch process with high energy consumption and greenhouse emission for the synthesis of ammonia (NH3 ), but high-yielding production is rendered challenging by the strong nonpolar N≡N bond in N2 molecules, which hinders their dissociation or activation. In this study, disordered Au nanoclusters anchored on two-dimensional ultrathin Ti3 C2 Tx MXene nanosheets are explored as highly active and selective electrocatalysts for efficient N2 -to-NH3 conversion, exhibiting exceptional activity with an NH3 yield rate of 88.3±1.7 µg h-1 mgcat. -1 and a faradaic efficiency of 9.3±0.4 %. A combination of in situ near-ambient pressure X-ray photoelectron spectroscopy and operando X-ray absorption fine structure spectroscopy is employed to unveil the uniqueness of this catalyst for N2 RR. The disordered structure is found to serve as the active site for N2 chemisorption and activation during the N2 RR process.

Abundant (110) Facets on PdCu3 Alloy Promote Electrochemical Conversion of CO2 to CO.

Electrochemical conversion of CO2 to high-value chemical fuels offers a promising strategy for managing the global carbon balance but faces huge challenges due to the lack of effective electrocatalysts. Here, we reported PdCu3 alloy nanoparticles with abundant exposed (110) facets supported on N-doped three-dimensional interconnected carbon frameworks (PdCu3/NC) as an efficient and durable electrocatalyst for electrochemical CO2 reduction to CO. The catalyst exhibits extremely high intrinsic CO2 reduction selectivity for CO production with a Faraday efficiency of nearly 100% at a mild potential of -0.5 V. Moreover, a rechargeable high-performance Zn-CO2 battery with PdCu3/NC as a cathode is developed to deliver a record-high energy efficiency of 99.2% at 0.5 mA cm-2 and rechargeable stability of up to 133 h. Theoretical calculations elucidate that the exposed (110) facet over PdCu3/NC is the active center for CO2 activation and rapid formation of the key *COOH intermediate.

Design of Ru-Ni diatomic sites for efficient alkaline hydrogen oxidation.

Anion exchange membrane fuel cells are limited by the slow kinetics of alkaline hydrogen oxidation reaction (HOR). Here, we establish HOR catalytic activities of single-atom and diatomic sites as a function of *H and *OH binding energies to screen the optimal active sites for the HOR. As a result, the Ru-Ni diatomic one is identified as the best active center. Guided by the theoretical finding, we subsequently synthesize a catalyst with Ru-Ni diatomic sites supported on N-doped porous carbon, which exhibits excellent catalytic activity, CO tolerance, and stability for alkaline HOR and is also superior to single-site counterparts. In situ scanning electrochemical microscopy study validates the HOR activity resulting from the Ru-Ni diatomic sites. Furthermore, in situ x-ray absorption spectroscopy and computational studies unveil a synergistic interaction between Ru and Ni to promote the molecular H2 dissociation and strengthen OH adsorption at the diatomic sites, and thus enhance the kinetics of HOR.

Effect of Ag-Decorated BiVO4 on Photoelectrochemical Water Splitting: An X-ray Absorption Spectroscopic Investigation.

Bismuth vanadate (BiVO4) has attracted substantial attention on account of its usefulness in producing hydrogen by photoelectrochemical (PEC) water splitting. The exploitation of BiVO4 for this purpose is yet limited by severe charge recombination in the bulk of BiVO4, which is caused by the short diffusion length of the photoexcited charge carriers and inefficient charge separation. Enormous effort has been made to improve the photocurrent density and solar-to-hydrogen conversion efficiency of BiVO4. This study demonstrates that modulating the composition of the electrode and the electronic configuration of BiVO4 by decoration with silver nanoparticles (Ag NPs) is effective in not only enhancing the charge carrier concentration but also suppressing charge recombination in the solar water splitting process. Decoration with a small number of Ag NPs significantly enhances the photocurrent density of BiVO4 to an extent that increases with the concentration of the Ag NPs. At 0.5% Ag NPs, the photocurrent density approaches 4.1 mA cm-2 at 1.23 V versus a reversible hydrogen electrode (RHE) under solar simulated light illumination; this value is much higher than the 2.3 mA cm-2 of pure BiVO4 under the same conditions. X-ray absorption spectroscopy (XAS) is utilized to investigate the electronic structure of pure BiVO4 and its modification by decoration with Ag NPs. Analytical results indicate that increased distortion of the VO4 tetrahedra alters the V 3d-O 2p hybridized states. Additionally, as the Ag concentration increases, the oxygen vacancy defects that act as recombination centers in BiVO4 are reduced. In situ XAS, which is conducted under dark and solar illumination conditions, reveals that the significantly enhanced PEC performance is attributable to the synergy of modulated atomic/electronic structures and the localized surface plasmon resonance effect of the Ag nanoparticles.

Electronic structure, electron field emission and magnetic behaviors of carbon nanotubes fabricated on La0.66Sr0.33MnO3 (LSMO) for spintronics application.

This work elucidates the electronic structure, electron field emission and magnetic anisotropic behaviors of single wall carbon nanotubes (SWCNTs) for the spin-electronics device application grown on the La0.66Sr0.33MnO3 (LSMO)/SrTiO3 (STO) substrate. Micro-Raman spectroscopy, X-ray absorption near-edge structure (XANES) and valence-band photoemission spectroscopy (VBPES) were used for the study of electronics structure. The field emission characteristics were studied from the electron field emission current density (J) versus applied electric field (E(A)) from which the turn-on electric field (E(TOE)) was evaluated. The magnetization behaviors are also presented by the M-H hysteresis loop and were obtained by applying the magnetic field in the parallel and perpendicular direction of the CNTs at 305 K and 5 K temperatures. A magnetic measurement shows that the coercivity of the CNTs/LSMO/STO is higher and has hig anisotropic-nature than the composite LSMO/STO that could be the good material for the future possible spin-electronics device applications.

Role of Interfacial Defects in Photoelectrochemical Properties of BiVO4 Coated on ZnO Nanodendrites: X-ray Spectroscopic and Microscopic Investigation.

Synchrotron-based X-ray spectroscopic and microscopic techniques are used to identify the origin of enhancement of the photoelectrochemical (PEC) properties of BiVO4 (BVO) that is coated on ZnO nanodendrites (hereafter referred to as BVO/ZnO). The atomic and electronic structures of core-shell BVO/ZnO nanodendrites have been well-characterized, and the heterojunction has been determined to favor the migration of charge carriers under the PEC condition. The variation of charge density between ZnO and BVO in core-shell BVO/ZnO nanodendrites with many unpaired O 2p-derived states at the interface forms interfacial oxygen defects and yields a band gap of approximately 2.6 eV in BVO/ZnO nanocomposites. Atomic structural distortions at the interface of BVO/ZnO nanodendrites, which support the fact that there are many interfacial oxygen defects, affect the O 2p-V 3d hybridization and reduce the crystal field energy 10Dq ∼2.1 eV. Such an interfacial atomic/electronic structure and band gap modulation increase the efficiency of absorption of solar light and electron-hole separation. This study provides evidence that the interfacial oxygen defects act as a trapping center and are critical for the charge transfer, retarding electron-hole recombination, and high absorption of visible light, which can result in favorable PEC properties of a nanostructured core-shell BVO/ZnO heterojunction. Insights into the local atomic and electronic structures of the BVO/ZnO heterojunction support the fabrication of semiconductor heterojunctions with optimal compositions and an optimal interface, which are sought to maximize solar light utilization and the transportation of charge carriers for PEC water splitting and related applications.

Correlation among photoluminescence and the electronic and atomic structures of Sr2SiO4:xEu3+ phosphors: X-ray absorption and emission studies.

A series of Eu3+-activated strontium silicate phosphors, Sr2SiO4:xEu3+ (SSO:xEu3+, x = 1.0, 2.0 and 5.0%), were synthesized by a sol-gel method, and their crystalline structures, photoluminescence (PL) behaviors, electronic/atomic structures and bandgap properties were studied. The correlation among these characteristics was further established. X-ray powder diffraction analysis revealed the formation of mixed orthorhombic α'-SSO and monoclinic ß-SSO phases of the SSO:xEu3+ phosphors. When SSO:xEu3+ phosphors are excited under ultraviolet (UV) light (λ = 250 nm, ~ 4.96 eV), they emit yellow (~ 590 nm), orange (~ 613 nm) and red (~ 652 and 703 nm) PL bands. These PL emissions typically correspond to 4f-4f electronic transitions that involve the multiple excited 5D0 → 7FJ levels (J = 1, 2, 3 and 4) of Eu3+ activators in the host matrix. This mechanism of PL in the SSO:xEu3+ phosphors is strongly related to the local electronic/atomic structures of the Eu3+-O2- associations and the bandgap of the host lattice, as verified by Sr K-edge and Eu L3-edge X-ray absorption near-edge structure (XANES)/extended X-ray absorption fine structure, O K-edge XANES and Kα X-ray emission spectroscopy. In the synthesis of SSO:xEu3+ phosphors, interstitial Eu2O3-like structures are observed in the host matrix that act as donors, providing electrons that are nonradiatively transferred from the Eu 5d and/or O 2p-Eu 4f/5d states (mostly the O 2p-Eu 5d states) to the 5D0 levels, facilitating the recombination of electrons that have transitioned from the 5D0 level to the 7FJ level in the bandgap. This mechanism is primarily responsible for the enhancement of PL emissions in the SSO:xEu3+ phosphors. This PL-related behavior indicates that SSO:xEu3+ phosphors are good light-conversion phosphor candidates for use in near-UV chips and can be very effective in UV-based light-emitting diodes.

Publisher Correction: Copper adparticle enabled selective electrosynthesis of n-propanol.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

High-temperature annealing effects on multiwalled carbon nanotubes: electronic structure, field emission and magnetic behaviors.

This work elucidates the effects of high-temperature annealing on the microscopic and electronic structure of multiwalled carbon nanotubes (MWCNTs) using high-resolution transmission electron microscopy, micro-Raman spectroscopy, X-ray diffraction, X-ray absorption near-edge structure (XANES) and valence-band photoemission spectroscopy (VBPES), respectively. The field emission and magnetization behaviors are also presented. The results of annealing are as follows: (1) MWCNTs tend to align in the form of small fringes along their length, promote graphitization and be stable in air, (2) XANES indicates an enhancement in oxygen content on the sample, implying that it can be adopted for sensing and storing oxygen gas, (3) the electron field emission current density (J) is enhanced and the turn-on electric field (E(TOE)) reduced, suggesting potential use in field emission displays and as electron sources in microwave tube amplifiers and (4) as-grown MWCNTs with embedded iron nanoparticles exhibits significantly higher coercivity approximately 750 Oe than its bulk counterpart (Fe(bulk) approximately 0.9 Oe), suggesting its potential use as low-dimensional high-density magnetic recording media.

Electronic, Electrical, and Magnetic Behavioral Change of SiO2-NP-Decorated MWCNTs.

Silicon-oxide-nanoparticle (SiO2-NP) heteroatoms were decorated/deposited onto multiwall carbon nanotube (MWCNT) surface to tune the properties of MWCNTs for electronic and magnetic applications. To achieve this objective, SiO2-NPs and MWCNTs were prepared and suspended together into toluene and heated at <100 °C for the formation of MWCNTs/SiO2-NP nanocomposites. A change in the microstructure, electronic, electrical, and magnetic behaviors of MWCNT nanocomposites decorated/deposited with silicon content was investigated using different techniques, viz., scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy for structural, compositional, and electronic structure, while current-voltage was used for electrical properties and field-dependent magnetization and electron spin resonance techniques were used for magnetic properties. The results indicated that SiO2-NPs adhered onto MWCNTs, resulting in variation in the material conductivity with the Si-NP content. The coercivity of MWCNT nanocomposites adhered with 1.5 atom % Si-NPs (H C@40 K = 689 Oe) is higher than that of those adhered with 5.75 atom % Si-NPs (H C@40 K = 357 Oe). In general, the results provide information about the possibilities of tuning the electronic, electrical, and magnetic properties of MWCNTs by adherence of SiO2-NPs onto them. This tuning of material properties could be useful for different electronic and magnetic device applications.

Copper adparticle enabled selective electrosynthesis of n-propanol.

The electrochemical reduction of carbon monoxide is a promising approach for the renewable production of carbon-based fuels and chemicals. Copper shows activity toward multi-carbon products from CO reduction, with reaction selectivity favoring two-carbon products; however, efficient conversion of CO to higher carbon products such as n-propanol, a liquid fuel, has yet to be achieved. We hypothesize that copper adparticles, possessing a high density of under-coordinated atoms, could serve as preferential sites for n-propanol formation. Density functional theory calculations suggest that copper adparticles increase CO binding energy and stabilize two-carbon intermediates, facilitating coupling between adsorbed *CO and two-carbon intermediates to form three-carbon products. We form adparticle-covered catalysts in-situ by mediating catalyst growth with strong CO chemisorption. The new catalysts exhibit an n-propanol Faradaic efficiency of 23% from CO reduction at an n-propanol partial current density of 11 mA cm-2.

The key energy scales of Gd-based metallofullerene determined by resonant inelastic x-ray scattering spectroscopy.

Endohedral metallofullerenes, formed by encaging Gd inside fullerenes like C80, can exhibit enhanced proton relaxitivities compared with other Gd-chelates, making them the promising contrast agents for magnetic resonance imaging (MRI). However, the underlying key energy scales of Gd x Sc3-x N@C80 (x = 1-3) remain unclear. Here, we carry out resonant inelastic x-ray scattering (RIXS) experiments on Gd x Sc3-x N@C80 at Gd N 4,5-edges to directly study the electronic structure and spin flip excitations of Gd 4f electrons. Compared with reference Gd2O3 and contrast agent Gadodiamide, the features in the RIXS spectra of all metallofullerenes exhibit broader spectral lineshape and noticeable energy shift. Using atomic multiplet calculations, we have estimated the key energy scales such as the inter-site spin exchange field, intra-atomic 4f-4f Coulomb interactions, and spin-orbit coupling. The implications of these parameters to the 4f states of encapsulated Gd atoms are discussed.