A Lotus shaped acoustofluidic mixer: High throughput homogenisation of liquids in 2 ms using hydrodynamically coupled resonators.

This paper presents an acoustically actuated microfluidic mixer that uses an array of hydrodynamically coupled resonators to rapidly homogenise liquid solutions and synthesise nanoparticles. The system relies on 8 identical oscillating cantilevers that are equally spaced on the perimeter of a circular well, through which the liquid solutions are introduced. When an oscillatory electrical signal is applied to a piezoelectric transducer attached to the device, the cantilevers start resonating. Due to the close proximity between the cantilevers, their circular arrangement and the liquid medium in which they are immersed, the vibration of each cantilever affects the response of its neighbours. The streaming fields and shearing rates resulting from the oscillating structures were characterised. It was shown that the system can be used to effectively mix fluids at flow rates up to 1400 µl.min-1 in time scales as low as 2 ms. The rapid mixing time is especially advantageous for nanoparticle synthesis, which is demonstrated by synthesising Poly lactide-co-glycolic acid (PLGA) nanoparticles with 52.2 nm size and PDI of 0.44.

A star shaped acoustofluidic mixer enhances rapid malaria diagnostics via cell lysis and whole blood homogenisation in 2 seconds.

Malaria is a life-threatening disease caused by a parasite, which can be transmitted to humans through bites of infected female Anopheles mosquitoes. This disease plagues a significant population of the world, necessitating the need for better diagnostic platforms to enhance the detection sensitivity, whilst reducing processing times, sample volumes and cost. A critical step in achieving improved detection is the effective lysis of blood samples. Here, we propose the use of an acoustically actuated microfluidic mixer for enhanced blood cell lysis. Guided by numerical simulations, we experimentally demonstrate that the device is capable of lysing a 20× dilution of isolated red blood cells (RBCs) with an efficiency of ∼95% within 350 ms (0.1 mL). Further, experimental results show that the device can effectively lyse whole blood irrespective of its dilution factor. Compared to the conventional method of using water, this platform is capable of releasing a larger quantity of haemoglobin into plasma, increasing the efficiency without the need for lysis reagents. The lysis efficiency was validated with malaria infected whole blood samples, resulting in an improved sensitivity as compared to the unlysed infected samples. Partial least squares-regression (PLS-R) analysis exhibits cross-validated R2 values of 0.959 and 0.98 from unlysed and device lysed spectral datasets, respectively. Critically, as expected, the root mean square error of cross validation (RMSECV) value was significantly reduced in the acoustically lysed datasets (RMSECV of 0.97), indicating the improved quantification of parasitic infections compared to unlysed datasets (RMSECV of 1.48). High lysis efficiency and ultrafast processing of very small sample volumes makes the combined acoustofluidic/spectroscopic approach extremely attractive for point-of-care blood diagnosis, especially for detection of neonatal and congenital malaria in babies, for whom a heel prick is often the only option for blood collection.

High throughput acoustic microfluidic mixer controls self-assembly of protein nanoparticles with tuneable sizes.

HYPOTHESIS: Protein nanoparticles have attracted increased interest due to their broad applications ranging from drug delivery and vaccines to biocatalysts and biosensors. The morphology and the size of the nanoparticles play a crucial role in determining their suitability for different applications. Yet, effectively controlling the size of the nanoparticles is still a significant challenge in their manufacture. The hypothesis of this paper is that the assembly conditions and size of protein particles can be tuned via a mechanical route by simply modifying the mixing time and strength, while keeping the chemical parameters constant. EXPERIMENTAL: We use an acoustically actuated, high throughput, ultrafast, microfluidic mixer for the assembly of protein particles with tuneable sizes. The performance of the acoustic micro-mixer is characterized via Laser Doppler Vibrometry and image processing. The assembly of protein nanoparticles is monitored by dynamic light scattering (DLS) and transmission electron microscopy (TEM). FINDINGS: By changing actuation parameters, the turbulence and mixing in the microchannel can be precisely varied to control the initiation of protein particle assembly while the solution conditions of assembly (pH and ionic strength) are kept constant. Importantly, mixing times as low as 6 ms can be achieved for triggering protein assembly in the microfluidic channel. In comparison to the conventional batch process of assembly, the acoustic microfluidic mixer approach produces smaller particles with a more uniform size distribution, promising a new way to manufacture protein particles with controllable quality.