RESUMEN
Due to their distinct and tailorable internal cavity structures, zeolites serve as promising materials for efficient and specific gas separations such as the separation of /CO2 from N2. A subset of zeolite materials exhibits trapdoor behavior which can be exploited for particularly challenging separations, such as the separation of hydrogen, deuterium, and tritium for the nuclear industry. This study systematically delves into the influence of the chabazite (CHA) and merlinoite (MER) zeolite frameworks combined with different door-keeping cations (K+, Rb+, and Cs+) on the trapdoor separation behavior under a variety of thermal and gas conditions. Both CHA and MER frameworks were synthesized from the same parent Y-zeolite and studied using in situ X-ray diffraction as a function of increasing temperatures under 1 bar H2 exposures. This resulted in distinct thermal responses, with merlinoite zeolites exhibiting expansion and chabazite zeolites showing contraction of the crystal structure. Simultaneous thermal analysis (STA) and gas sorption techniques further demonstrated how the size of trapdoor cations restricts access to the internal porosities of the zeolite frameworks. These findings highlight that both the zeolite frameworks and the associated trapdoor cations dictate the thermal response and gas sorption behavior. Frameworks determine the crystalline geometry, the maximum porosities, and displacement of the cation in gas sorption, while associated cations directly affect the blockage of the functional sites and the thermal behavior of the frameworks. This work contributes new insights into the efficient design of zeolites for gas separation applications and highlights the significant role of the trapdoor mechanism.
RESUMEN
Cyclic triureas derived from 1,4,7-triazacyclononane (TACN) were synthesized; X-ray crystallography showed a chiral bowl-like conformation with each urea hydrogen-bonded to its neighbor with uniform directionality, forming a "cyclochiral" closed loop of hydrogen bonds. Variable-temperature 1H NMR, 1H-1H exchange spectroscopy, Eyring analysis, computational modeling, and studies in various solvents revealed that cyclochirality is dynamic (ΔG25°C = 63-71 kJ mol-1 in noncoordinating solvents), exchanging between enantiomers by two mechanisms: bowl inversion and directionality reversal, with the former subject to a slightly smaller enantiomerization barrier. The enantiomerization rate substantially increased in the presence of hydrogen-bonding solvents. Population of only one of the two cyclochiral hydrogen-bond directionalities could be induced by annulating one ethylene bridge with a trans-cyclohexane. Alternatively, enantiomerization could be inhibited by annulating one ethylene bridge with a cis-cyclohexane (preventing bowl inversion) and replacing one urea function with a formamide (preventing directionality reversal). Combining these structural modifications resulted in an enantiomerization barrier of ΔG25°C = 93 kJ mol-1, furnishing a planar-chiral, atropisomeric bowl-shaped structure whose stereochemical stability arises solely from its hydrogen-bonding network.
RESUMEN
A series of intermolecular transition metal frustrated Lewis pairs (FLPs) based on zirconocene alkoxide complexes ([Cp2Zr(OMes)]+ 1 or ([Cp*2Zr(OMes)]+ 2) with nitrogen Lewis bases (NEt3, NEtiPr2, pyridine, 2-methylpyridine, 2,6-lutidine) are reported. The interaction between Zr and N depends on the specific derivatives used, in general more sterically encumbered pairs leading to a more frustrated interaction; however, DOSY NMR spectroscopy reveals these interactions to be dynamic in nature. The pairs undergo typical FLP-type reactivity with D2, CO2, THF, and PhCCD. The catalytic dehydrocoupling of Me2NH·BH3 is also reported. Comparisons can be made with previous work employing phosphines as Lewis bases suggesting that hard-hard or hard-soft acid-base considerations are of little importance compared to the more prominent roles of steric bulk and basicity.
RESUMEN
Heterolytic cleavage of homoatomic bonds is a challenge, as it requires separation of opposite charges. Even highly strained homoatomic rings (e.g., cyclopropane and cyclobutane) are kinetically stable and do not react with nucleophiles or electrophiles. In contrast, cycloalkanes bearing electron-donating/withdrawing substituents on adjacent carbons have polarized C-C bonds and undergo numerous heterolytic ring-opening and expansion reactions. Here we show that upon electrophile activation phosphorus homocycles exhibit analogous reactivity, which is modulated by the amount of ring strain and extent of bond polarization. Neutral rings (tBuP)3, 1, or (tBuP)4, 2, show no reactivity toward nitriles, but the cyclo-phosphinophosphonium derivative [(tBuP)3Me]+, [3Me]+, undergoes addition to nitriles giving five-membered P3CN heterocycles. Because of its lower ring strain, the analogous four-membered ring, [(tBuP)4Me]+, [4Me]+, is thermodynamically stable with respect to cycloaddition with nitriles, despite similar P-P bond polarization. We also report the first example of isonitrile insertion into cyclophosphines, which is facile for polarized derivatives [3Me]+ and [4Me]+, but does not proceed for neutral 1 or 2, despite the calculated exothermicity of the process. Finally, we assessed the reactions of [4R]+ R = H, Cl, F toward 4-dimethylaminopyridine (dmap), which suggest that the site of nucleophilic attack varies with the extent of P-P bond polarization. These results deconvolute the influence of ring strain and bond polarization on the chemistry of inorganic homocycles and unlock new synthetic possibilities.
RESUMEN
The addition of a cyclotriphosphine to a broad range of nitriles gives access to the first examples of free 1-aza-2,3,4-triphospholenes in a rapid, ambient temperature, one-pot, high-yield protocol. The reaction produces electron-rich heterocycles (four lone pairs) and features homoatomic σ-bond heterolysis, thereby combining the key features of the 1,3-dipolar cycloaddition chemistry of azides and cyclopropanes. Also reported is the first catalytic addition of P-P bonds to the C≡N bond. The coordination chemistry of the new heterocycles is explored.
RESUMEN
The facile synthesis of a stable and isolable compound with a fluoroalkynyl group, M-C≡CF, is reported. Reaction of [Ru(C≡CH)(η5 -C5 Me5 )(dppe)] with an electrophilic fluorinating agent (NFSI) results in the formation of the fluorovinylidene complex [Ru(=C=CHF)(η5 -C5 Me5 )(dppe)][N(SO2 Ph)2 ]. Subsequent deprotonation with LiN(SiMe3 )2 affords the fluoroalkynyl complex [Ru(C≡CF)(η5 -C5 Me5 )(dppe)]. In marked contrast to the rare and highly reactive examples of fluoroalkynes that have been reported previously, this compound can be readily isolated and structurally characterized. This has allowed the structure and bonding in the CCF motif to be explored. Further electrophilic fluorination of this species yields the difluorovinylidene complex [Ru(C=CF2 )(η5 -C5 Me5 )(dppe)][N(SO2 Ph)2 ].
RESUMEN
Manganese-catalyzed C-H bond activation chemistry is emerging as a powerful and complementary method for molecular functionalization. A highly reactive seven-membered Mn(I) intermediate is detected and characterized that is effective for H-transfer or reductive elimination to deliver alkenylated or pyridinium products, respectively. The two pathways are determined at Mn(I) by judicious choice of an electron-deficient 2-pyrone substrate containing a 2-pyridyl directing group, which undergoes regioselective C-H bond activation, serving as a valuable system for probing the mechanistic features of Mn C-H bond activation chemistry.
RESUMEN
Organofluorine chemistry plays a key role in materials science, pharmaceuticals, agrochemicals, and medical imaging. However, the formation of new carbon-fluorine bonds with controlled regiochemistry and functional group tolerance is synthetically challenging. The use of metal complexes to promote fluorination reactions is of great current interest, but even state-of-the-art approaches are limited in their substrate scope, often require activated substrates, or do not allow access to desirable functionality, such as alkenyl C(sp(2))-F or chiral C(sp(3))-F centers. Here, we report the formation of new alkenyl and alkyl C-F bonds in the coordination sphere of ruthenium via an unprecedented outer-sphere electrophilic fluorination mechanism. The organometallic species involved are derived from nonactivated substrates (pyridine and terminal alkynes), and C-F bond formation occurs with full regio- and diastereoselectivity. The fluorinated ligands that are formed are retained at the metal, which allows subsequent metal-mediated reactivity.
Asunto(s)
Electrones , Halogenación , Compuestos Organometálicos/química , Modelos Moleculares , Conformación Molecular , EstereoisomerismoRESUMEN
Co-crystallisation of, in particular, 4-iodotetrafluorophenol with a series of secondary and tertiary cyclic amines results in deprotonation of the phenol and formation of the corresponding ammonium phenate. Careful examination of the X-ray single-crystal structures shows that the phenate anion develops a C=O double bond and that the C-C bond lengths in the ring suggest a Meissenheimer-like delocalisation. This delocalisation is supported by the geometry of the phenate anion optimised at the MP2(Full) level of theory within the aug-cc-pVDZ basis (aug-cc-pVDZ-PP on I) and by natural bond orbital (NBO) analyses. With sp(2) hybridisation at the phenate oxygen atom, there is strong preference for the formation of two non-covalent interactions with the oxygen sp(2) lone pairs and, in the case of secondary amines, this occurs through hydrogen bonding to the ammonium hydrogen atoms. However, where tertiary amines are concerned, there are insufficient hydrogen atoms available and so an electrophilic iodine atom from a neighbouring 4-iodotetrafluorophenate group forms an Iâ â â O halogen bond to give the second interaction. However, in some co-crystals with secondary amines, it is also found that in addition to the two hydrogen bonds forming with the phenate oxygen sp(2) lone pairs, there is an additional intermolecular Iâ â â O halogen bond in which the electrophilic iodine atom interacts with the C=O π-system. All attempts to reproduce this behaviour with 4-bromotetrafluorophenol were unsuccessful. These structural motifs are significant as they reproduce extremely well, in low-molar-mass synthetic systems, motifs found by Ho and co-workers when examining halogen-bonding interactions in biological systems. The analogy is cemented through the structures of co-crystals of 1,4-diiodotetrafluorobenzene with acetamide and with N-methylbenzamide, which, as designed models, demonstrate the orthogonality of hydrogen and halogen bonding proposed in Ho's biological study.
Asunto(s)
Aminas/química , Fluorobencenos/química , Halógenos/química , Sales (Química)/química , Carbono/química , Cristalografía por Rayos X , Enlace de Hidrógeno , Conformación MolecularRESUMEN
Efficient catalysts for Guerbet-type ethanol/methanol upgrading to iso-butanol have been developed via Michael addition of a variety of amines to ruthenium-coordinated dppen (1,1-bis(diphenylphosphino)ethylene). All catalysts produce over 50% iso-butanol yield with >90% selectivity in 2 h with catalyst 1 showing the best activity (74% yield after this time). The selectivity and turnover number approach 100% and 1000 respectively using catalyst 6. The presence of uncoordinated functionalised donor groups in these complexes results in a more stable catalyst compared to unfunctionalised analogues.
RESUMEN
The reactions of R2P-PR2 with R'E-ER', (where E = Se, S, O, Te) to give R2P-ER' have been explored experimentally and computationally. The reaction of Ph2P-PPh2 with PhSe-SePh gives Ph2P-SePh (1) rapidly and quantitatively. The P-P/Se-Se reaction is inhibited by the addition of the radical scavenger TEMPO which is consistent with a radical mechanism for the heterometathesis reaction. Compound 1 has been fully characterised, including by X-ray crystallography. A range of other Ar2P-SeR (R = Ph, nBu or CH2CH2CO2H) have also been prepared and characterised. The reaction of 1 with [Mo(CO)4(nbd)] (nbd = norbornadiene) gives two products which, from their characteristic 31P NMR data, have been identified as cis-[Mo(CO)4(Ph2PSePh-P)2] (8) and the mixed-donor complex cis-[Mo(CO)4(Ph2P-SePh-P)(Ph2P-SePh-Se)] (9). It is deduced that the P and Se atoms in ligand 1 have comparable capacity to coordinate to Mo(0). The reaction of Ph2P-PPh2 with PhS-SPh gives Ph2P-SPh (2) quantitatively but no reaction was observed between Ph2P-PPh2 and PhTe-TePh. Heterometathesis between Ph2P-PPh2 and tBuO-OtBu does not occur thermally but has been observed under UV irradiation to give Ph2P-OtBu along with P(V) oxidation by-products. DFT calculations have been carried out to illuminate why heterometatheses with dichalcogenides R'E-ER' occur readily when E = S and Se but not when E = O and Te. The calculations show that heterometathesis is predicted to be thermodynamically favourable for E = O, S and Se and unfavourable for E = Te. The fact that a metathesis reaction between Ph2P-PPh2 with tBuO-OtBu is not observed in the absence of UV radiation, is therefore due to kinetics.
RESUMEN
We report a variety of rhenium complexes supported by bidentate and tridentate phosphinoamine ligands and their use in the formation of the advanced biofuel isobutanol from methanol and ethanol. Rhenium pincer complexes 1-3 are effective catalysts for this process, with 2 giving isobutanol in 35% yields, with 97% selectivity in the liquid fraction, over 16 h with catalyst loadings as low as 0.07 mol %. However, these catalysts show poorer overall selectivity, with the formation of a significant amount of carboxylate salt solid byproduct also being observed. Production of the active catalyst 1d has been followed by 31P NMR spectroscopy, and the importance of the presence of base and elevated temperatures to catalyst activation has been established. Complexes supported by diphosphine ligands are inactive for Guerbet chemistry; however, complexes supported by bidentate phosphinoamine ligands show greater selectivity for isobutanol formation over carboxylate salts. The novel complex 7 was able to produce isobutanol in 28% yield over 17 h. The importance of the N-H moiety to the catalytic performance has also been established, giving further weight to the hypothesis that these catalysts operate via a cooperative mechanism.
RESUMEN
The structures of three iodochalcones, functionalized with fluorine or a nitro group, have been investigated to explore the impact of different molecular electrostatic distributions on the halogen bonding within each crystal structure. The strongly withdrawing nitro group presented a switch of the halogen bond from a lateral to a linear motif. Surprisingly, this appears to be influenced by a net positive shift in charge distribution around the lateral edges of the σ-hole, making the lateral I...I bonding motif less preferable. A channel of amphoteric I...I type II halogen bonds is observed for a chalcone molecule, which was not previously reported in chalcones, alongside an example of the common synthon involving extended linear chains of I...O2N donor-acceptor halogen bonds. This work shows that halogenated chalcones may be an interesting target for developing halogen bonding as a significant tool within crystal engineering, a thus far underexplored area for this common structural motif.
RESUMEN
The title compound, C15H10I2O, is a halogenated chalcone formed from two iodine substituted rings, one para-substituted and the other meta-substituted, linked through a prop-2-en-1-one spacer. In the mol-ecule, the mean planes of the 3-iodo-phenyl and the 4-iodo-phenyl groups are twisted by 46.51â (15)°. The calculated electrostatic potential surfaces show the presence of σ-holes on both substituted iodines. In the crystal, the mol-ecules are linked through type II halogen bonds, forming a sheet structure parallel to the bc plane. Between the sheets, weak inter-molecular C-Hâ¯π inter-actions are observed. Hirshfeld surface analysis showed that the most significant contacts in the structure are Câ¯H/Hâ¯C (31.9%), followed by Hâ¯H (21.4%), Iâ¯H/Hâ¯I (18.4%). Iâ¯I (14.5%) and Oâ¯H/Hâ¯O (8.1%).
RESUMEN
The structure of three functionalized chalcones (1,3-di-aryl-prop-2-en-1-ones), containing combinations of nitro and di-methyl-amino functional groups, are presented, namely, 1-[4-(di-methyl-amino)-phen-yl]-3-(3-nitro-phen-yl)prop-2-en-1-one, C17H16N2O3, Gp8m, 3-[3-(di-methyl-amino)-phen-yl]-1-(3-nitro-phen-yl)prop-2-en-1-one, C17H16N2O3, Hm7m and 1-(3-nitro-phen-yl)-3-phenyl-prop-2-en-1-one, C15H11NO3, Hm1-. Each of the mol-ecules contains bonding motifs seen in previously solved crystal structures of functionalized chalcones, adding to the large dataset available for these small organic mol-ecules. The structures of all three of the title compounds contain similar bonding motifs, resulting in two-dimensional planes of mol-ecules formed via C-Hâ¯O hydrogen-bonding inter-actions involving the nitro- and ketone groups. The structure of Hm1- is very similar to the crystal structure of a previously solved isomer [Jing (2009 â¸). Acta Cryst. E65, o2510].
RESUMEN
Heterocyclic chalcones are a recently explored subgroup of chalcones that have sparked interest due to their significant antibacterial and antifungal capabilities. Herein, the structure and solubility of two such compounds, (E)-1-(1H-pyrrol-2-yl)-3-(thiophen-2-yl)prop-2-en-1-one and (E)-3-phenyl-1-(1H-pyrrol-2-yl)prop-2-en-1-one, are assessed. Single crystals of (E)-1-(1H-pyrrol-2-yl)-3-(thiophen-2-yl)prop-2-en-1-one were grown, allowing structural comparisons between the heterocyclic chalcones and (2E)-1,3-diphenylprop-2-en-1-one, trivially known as trans-chalcone. The two heterocyclic chalcones were found to be less soluble in all solvents tested and to have higher melting points than trans-chalcone, probably due to their stronger intermolecular interactions arising from the functionalized rings. Interestingly, however, it was found that the addition of the thiophene ring in (E)-1-(1H-pyrrol-2-yl)-3-(thiophen-2-yl)prop-2-en-1-one increased both the melting point and solubility of the sample compared with (E)-3-phenyl-1-(1H-pyrrol-2-yl)prop-2-en-1-one. This observation may be key for the future crystal engineering of heterocyclic chalcones for pharmaceutical applications.
RESUMEN
Lamotrigine is an active pharmaceutical ingredient used as a treatment for epilepsy and psychiatric disorders. Single crystals of an ethano-late solvate, C9H7Cl2N5·C2H5OH, were produced by slow evaporation of a saturated solution from anhydrous ethanol. Within the crystal structure, the lamotrigine mol-ecules form dimers through N-Hâ¯N hydrogen bonds involving the amine N atoms in the ortho position of the triazine group. These dimers are linked into a tape motif through hydrogen bonds involving the amine N atoms in the para position. The ethanol and lamotrigine are present in a 1:1 ratio in the lattice with the ethyl group of the ethanol mol-ecule exhibiting disorder with an occupancy ratio of 0.516â (14):0.484â (14).
RESUMEN
The first high molar mass polyaminoboranes with an organic substituent at boron, namely the B-arylated polyaminoboranes [NH2-BHPh]n (2a) and [NH2-BH(p-CF3C6H4)]n (2b), have been prepared via catalytic dehydropolymerisation. These materials can be considered as inorganic analogues of polystyrene with a B-N main chain. Their synthesis was achieved from B-aryl amine-borane precursors in solution using an [IrH2(POCOP)] precatalyst.
RESUMEN
Metal vinylidene complexes are widely encountered, or postulated, as intermediates in a range of important metal-mediated transformations of alkynes. However, fluorovinylidene complexes have rarely been described and their reactivity is largely unexplored. By making use of the novel outer-sphere electrophilic fluorination (OSEF) strategy we have developed a rapid, robust and convenient method for the preparation of fluorovinylidene and trifluoromethylvinylidene ruthenium complexes from non-fluorinated alkynes. Spectroscopic investigations (NMR and UV/Vis), coupled with TD-DFT studies, show that fluorine incorporation results in significant changes to the electronic structure of the vinylidene ligand. The reactivity of fluorovinylidene complexes shows many similarities to non-fluorinated analogues, but also some interesting differences, including a propensity to undergo unexpected C-F bond cleavage reactions. Heating fluorovinylidene complex [Ru(η(5)-C5H5)(PPh3)2(C[double bond, length as m-dash]C{F}R)][BF4] led to C-H activation of a PPh3 ligand to form an orthometallated fluorovinylphosphonium ligand. Reaction with pyridine led to nucleophilic attack at the metal-bound carbon atom of the vinylidene to form a vinyl pyridinium species, which undergoes both C-H and C-F activation to give a novel pyridylidene complex. Addition of water, in the presence of chloride, leads to anti-Markovnikov hydration of a fluorovinylidene complex to form an α-fluoroaldehyde, which slowly rearranges to its acyl fluoride isomer. Therefore, fluorovinylidenes ligands may be viewed as synthetic equivalents of 1-fluoroalkynes providing access to reactivity not possible by other routes.
RESUMEN
The coordination modes of the [Au(PPh3)](+) cation to metal alkynyl complexes have been investigated. On addition to ruthenium, a vinylidene complex, [Ru(η(5)-C5H5)(PPh3)2([double bond, length as m-dash]C[double bond, length as m-dash]CPh{AuPPh3})](+), is obtained while addition to a gold(iii) compound gives di- and trinuclear gold complexes depending on the conditions employed. In the trinuclear species, a gold(i) cation is sandwiched between two gold(iii) alkynyl complexes, suggesting that coordination of multiple C-C triple bonds to gold is facile.