RESUMEN
As the problem of antimicrobial resistance is constantly increasing, there is a renewed interest in antimicrobial products derived from natural sources, particularly obtained from innovative and eco-friendly materials. Insect lipids, due to their fatty acid composition, can be classified as natural antimicrobial compounds. In order to assess the antibacterial efficacy of Hermetia illucens lipids, we extracted this component from the larval stage, fed on different substrates and we characterized it. Moreover, we analyzed the fatty acid composition of the feeding substrate, to determine if and how it could affect the antimicrobial activity of the lipid component. The antimicrobial activity was evaluated against Gram-positive Micrococcus flavus and Gram-negative bacteria Escherichia coli. Analyzing the fatty acid profiles of larval lipids that showed activity against the two bacterial strains, we detected significant differences for C4:0, C10:0, C16:1, C18:3 n3 (ALA), and C20:1. The strongest antimicrobial activity was verified against Micrococcus flavus by lipids extracted from larvae reared on strawberry, tangerine, and fresh manure substrates, with growth inhibition zones ranged from 1.38 to 1.51 mm, while only the rearing on manure showed the effect against Escherichia coli. Notably, the fatty acid profile of H. illucens seems to not be really influenced by the substrate fatty acid profile, except for C18:0 and C18:2 CIS n6 (LA). This implies that other factors, such as the rearing conditions, larval development stages, and other nutrients such as carbohydrates, affect the amount of fatty acids in insects. KEY POINTS: ⢠Feeding substrates influence larval lipids and fatty acids (FA) ⢠Generally, there is no direct correlation between substrate FAs and the same larvae FAs ⢠Specific FAs influence more the antimicrobial effect of BSF lipids.
Asunto(s)
Dípteros , Estiércol , Micrococcus , Animales , Larva , Escherichia coli , Ácidos Grasos , Micrococcus luteusRESUMEN
OBJECTIVES: The main objective of this study was to assess the three-dimensional facial characteristics of children affected by spinal muscular atrophy (SMA), a severe muscular disorder characterized by hypotonia, areflexia, weakness, and respiratory impairment. MATERIALS/METHODS: Stereophotogrammetric facial scans from 22 SMA type II patients aged 2-7 years were obtained. Data were analysed using both inter-landmark distances and principal component analysis and compared with data collected from matched control subjects. RESULTS: Patients had wider transverse facial diameters, but smaller biocular width. Middle and lower anterior face heights were increased, whereas the mandibular ramus was shorter, with a reduced posterior-to-anterior face height ratio. Facial width-to-length ratio was reduced. In the sagittal plane, mandibular body length, and facial divergence were increased, whereas the gonial angles were decreased. In the horizontal plane, lower facial convexity was greater in patients, whereas mandibular convexity was smaller. Patients had smaller and down-slanted eye fissures, with a larger and more vertically developed nose. LIMITATIONS: This study assessed a relatively small number of patients, due to the rare frequency of SMA type II. CONCLUSIONS/IMPLICATIONS: SMA type II children possess peculiar facial alterations that may be due to the altered muscular activity. As feeding problems may derive also by malocclusion and masticatory muscular alterations, a detailed assessment of the craniofacial individual alterations should be considered in the standards of care of these patients.
Asunto(s)
Maloclusión , Atrofias Musculares Espinales de la Infancia , Cefalometría , Niño , Preescolar , Cara/anatomía & histología , Cara/diagnóstico por imagen , Humanos , MandíbulaRESUMEN
Several researchers have analyzed the collocation of infraorbital foramen, but no study has so far considered the possible influence of cranial size.Three measurements (distances from anterior nasal spine, inferior orbital rim, angle at the intersection between the line from anterior nasal spine and the transversal plane parallel to the Frankfurt plane) were taken on 100 skulls belonging to a contemporary skeletal collection. In addition, maximum cranial length, maximum cranial breadth, cranial height, and bizygomatic breadth were measured, together with 2 indices (horizontal cephalic index and Giardina Y-index). Differences according to sex and side were assessed through 2-way analysis of variance test (Pâ<0.05). Measurements showing statistically significant differences according to sex were further assessed through 1-way analysis of covariance test including cranial measurements and indices as covariates (Pâ<0.05).Statistically significant differences according to sex and side were found respectively for the distance from anterior nasal spine and the angle at infraorbital foramen (Pâ<0.05). One-way analysis of covariance test verified that the sexual dimorphism of infraorbital foramen- anterior nasal spine distance was independent from the general measurements of cranium.The present study first proved that sexually dimorphic parameters useful for the localization of infraorbital foramen do not depend upon the cranium size.
Asunto(s)
Cráneo/anatomía & histología , Adulto , Femenino , Humanos , Masculino , Maxilar/anatomía & histología , Órbita/anatomía & histología , Tamaño de los Órganos , Caracteres SexualesRESUMEN
Palatal rugae are known in literature as individualizing anatomical structures with a strong potential for personal identification. However, a 3D assessment of their uniqueness has not yet been performed. The present study aims at verifying the uniqueness of 3D models of the palate. Twenty-six subjects were recruited among the orthodontic patients of a private dental office; from every patient, at least two dental casts were taken in different time periods, for a total of 62 casts. Dental casts were digitized by a 3D laser scanner (iSeries, Dental Wings©, Montreal, Canada). The palatal area was identified, and a series of 250 superimpositions was then performed automatically through VAM©software in order to reach the minimum point-to point distance between two models. In 36 matches the models belonged to the same individual, whereas in 214 mismatches they came from different subjects. The RMS (root mean square) of point-to-point distances was then calculated by 3D software. Possible statistically significant differences were assessed through Mann-Whitney test (p < 0.05). Results showed a statistically significant difference in RMS mean point-to-point distance between matches (mean 0.26 mm; SD 0.12) and mismatches (mean 1.30; SD 0.44) (p < 0.0001).All matches reached an RMS value below 0.50 mm. This study first provided an assessment of uniqueness of palatal rugae, based on their anatomical 3D conformations, with consequent applications to personal identification.
Asunto(s)
Imagenología Tridimensional , Paladar Duro/anatomía & histología , Adolescente , Femenino , Odontología Forense/métodos , Humanos , Procesamiento de Imagen Asistido por Computador , Masculino , Modelos Dentales , Programas Informáticos , Adulto JovenRESUMEN
PURPOSE: Modern 3-dimensional (3D) image acquisition systems represent a crucial technologic development in facial anatomy because of their accuracy and precision. The recently introduced portable devices can improve facial databases by increasing the number of applications. In the present study, the VECTRA H1 portable stereophotogrammetric device was validated to verify its applicability to 3D facial analysis. MATERIALS AND METHODS: Fifty volunteers underwent 4 facial scans using portable VECTRA H1 and static VECTRA M3 devices (2 for each instrument). Repeatability of linear, angular, surface area, and volume measurements was verified within the device and between devices using the Bland-Altman test and the calculation of absolute and relative technical errors of measurement (TEM and rTEM, respectively). In addition, the 2 scans obtained by the same device and the 2 scans obtained by different devices were registered and superimposed to calculate the root mean square (RMS; point-to-point) distance between the 2 surfaces. RESULTS: Most linear, angular, and surface area measurements had high repeatability in M3 versus M3, H1 versus H1, and M3 versus H1 comparisons (range, 82.2 to 98.7%; TEM range, 0.3 to 2.0 mm, 0.4° to 1.8°; rTEM range, 0.2 to 3.1%). In contrast, volumes and RMS distances showed evident differences in M3 versus M3 and H1 versus H1 comparisons and reached the maximum when scans from the 2 different devices were compared. CONCLUSION: The portable VECTRA H1 device proved reliable for assessing linear measurements, angles, and surface areas; conversely, the influence of involuntary facial movements on volumes and RMS distances was more important compared with the static device.
Asunto(s)
Cara/diagnóstico por imagen , Fotogrametría/instrumentación , Sistemas de Atención de Punto , Adulto , Femenino , Voluntarios Sanos , Humanos , Imagenología Tridimensional/instrumentación , Masculino , Persona de Mediana Edad , Reproducibilidad de los ResultadosRESUMEN
PURPOSE: The quantitative assessment of facial modifications from mimicry is of relevant interest for the rehabilitation of patients who can no longer produce facial expressions. This study investigated a novel application of 3-dimensional on 3-dimensional superimposition for facial mimicry. MATERIALS AND METHODS: This cross-sectional study was based on 10 men 30 to 40 years old who underwent stereophotogrammetry for neutral, happy, sad, and angry expressions. Registration of facial expressions on the neutral expression was performed. Root mean square (RMS) point-to-point distance in the labial area was calculated between each facial expression and the neutral one and was considered the main parameter for assessing facial modifications. In addition, effect size (Cohen d) was calculated to assess the effects of labial movements in relation to facial modifications. RESULTS: All participants were free from possible facial deformities, pathologies, or trauma that could affect facial mimicry. RMS values of facial areas differed significantly among facial expressions (P = .0004 by Friedman test). The widest modifications of the lips were observed in happy expressions (RMS, 4.06 mm; standard deviation [SD], 1.14 mm), with a statistically relevant difference compared with the sad (RMS, 1.42 mm; SD, 1.15 mm) and angry (RMS, 0.76 mm; SD, 0.45 mm) expressions. The effect size of labial versus total face movements was limited for happy and sad expressions and large for the angry expression. CONCLUSION: This study found that a happy expression provides wider modifications of the lips than the other facial expressions and suggests a novel procedure for assessing regional changes from mimicry.
Asunto(s)
Mimetismo Biológico , Labio/fisiología , Adulto , Estudios Transversales , Expresión Facial , Voluntarios Sanos , Humanos , Imagenología Tridimensional , Masculino , Fotogrametría , Programas InformáticosRESUMEN
Autologous fat grafting is a surgical procedure used to correct volumetric defects, atrophies, and sclerosis. Three-dimensional (3D) facial photography may enable researchers to quantify the success of surgical procedures through volumetric and surface assessments. Using 3D photography, the authors assessed the results of autologous fat grafting performed in a 15-year-old patient affected by Parry-Romberg syndrome, a rare condition resulting in progressive hemifacial atrophy of skin, subcutaneous tissues and, ultimately, bone. Stereophotogrammetric acquisitions were performed before and 4 months after the surgical intervention. The obtained results were objectively assessed in terms of facial symmetry through calculation of root mean square deviation point-to-point distance between the treated and healthy side, and volume modifications between pre- and postsurgical 3D facial scans. Four months after surgery, 73% of injected adipose tissue was resorbed, whereas facial symmetry increased up to 63%. The proposed method is not invasive and provides quantitative information about the surgical and esthetic outcomes. Clinicians could better plan surgery, and the patients could be more motivated and compliant to the treatment.
Asunto(s)
Tejido Adiposo/trasplante , Hemiatrofia Facial/diagnóstico por imagen , Hemiatrofia Facial/cirugía , Imagenología Tridimensional , Fotogrametría , Procedimientos de Cirugía Plástica , Adolescente , Humanos , Masculino , Trasplante AutólogoRESUMEN
Marfan syndrome (MFS) is a rare hereditable disorder of connective tissue caused by mutations in the fibrillin-1 gene FBN1. Timely diagnosis of MFS is essential to prevent life-threatening cardiovascular complications; nevertheless it can be difficult owing to the phenotypic variability of the syndrome. No clear quantitative definition of facial abnormalities associated with MFS is available. The aim of this study was to improve the definition of the facial phenotype associated with MFS and to verify the usefulness of a 3D noninvasive quantitative approach for its early recognition. 3D facial images of 61 Italian subjects with MFS, aged 16-64 years (21 males, 38 ± 15 years; 40 females, 41 ± 13 years) were obtained by stereophotogrammetry. From the coordinates of 17 soft-tissue facial landmarks, linear distances and angles were computed; z score values were calculated to compare patients with healthy reference subjects (400 males, 379 females) matched for sex and age. Student's t test was used for statistical comparisons. All subjects with MFS showed greater facial divergence (P < 0.001; mean z score +1.9) and a lower facial height index (P < 0.001; mean z score -1.9) than reference subjects, both values being influenced by a shorter mandibular ramus (P < 0.001; mean z score -1.9) and a mild but significant increase in facial height (P < 0.001; mean z score +1.2). Palpebral down-slanting was found in 85% of MFS subjects. There were no sex differences. Quantitative abnormalities identified in this study enrich information about the facial dysmorphism in MFS and confirm its usefulness for early recognition of the disease. Clin. Anat. 31:380-386, 2018. © 2017 Wiley Periodicals, Inc.
Asunto(s)
Cara/patología , Síndrome de Marfan/patología , Adolescente , Adulto , Antropometría , Femenino , Humanos , Imagenología Tridimensional , Masculino , Persona de Mediana Edad , Adulto JovenRESUMEN
Smiling has a great importance, both from a functional and an aesthetic point of view. The introduction of modern 3D acquisition and elaboration methods may provide additional help in the evaluation of facial mimicry. This study aims at proposing an innovative method to assess facial and labial movements in different types of smiles. Twenty healthy subjects (10 males, 10 females, mean age 27.5 years, SD 4.5 years), were recorded through a stereophotogrammetric system in neutral position and in three types of smiles: Mona-Lisa smile, canine smile, full-denture smile. All the 3D smiling models were superimposed on the corresponding neutral one and point-to-point root mean square (RMS) differences were computed. Labial surface areas in rest position and during each smile were calculated as well, together with the percentage modification in different types of smile. RMS values (facial and labial models), labial surface areas and percentage modifications were compared through ANCOVA tests to verify possible statistically significant differences according to sex and type of smile (p < 0.05). Intercanthal labial width was considered a covariate. RMS values progressively increased from Mona-Lisa to full-denture smile; statistically significant differences were found among all types of smiles, both for facial and labial models (p < 0.05), while no statistically significant sex and sex × smile interactions were found (p > 0.05). Labial surface and percentage of modification showed statistically significant differences according to both sex and type of smile (p < 0.05). The study provides a novel contribution to the field of sexual dimorphism in smiling. Level of Evidence V This journal requires that authors assign a level of evidence to each article. For a full description of these evidence-based medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .
Asunto(s)
Cara/anatomía & histología , Imagenología Tridimensional , Fotogrametría/métodos , Sonrisa/fisiología , Adulto , Estética , Cara/diagnóstico por imagen , Femenino , Voluntarios Sanos , Humanos , Masculino , Persona de Mediana Edad , Valores de Referencia , Muestreo , Sensibilidad y Especificidad , Adulto JovenRESUMEN
Holoprosencephaly (HPE) is a malformation of the brain, occurring during the first weeks of pregnancy, that may be associated with several craniofacial alterations and different pathological conditions.The authors describe a 2-year-old girl with lobar HPE, epilepsy, but with a roughly normal face. Despite the macroscopic, clinical appearance, a facial morphometric analysis, performed through a stereophotogrammetric system, showed features that diverge from reference subjects and that are considered typical of HPE.This study highlights how a digital anthropometric facial assessment through stereophotogrammetry can be a useful and noninvasive instrument to investigate the facial features of HPE, especially in the presence of an apparently normal facial aspect. Additionally, it can provide the bases for future insights about the relationship between embryological facial and cerebral development, the time of the occurred defect and, in the end, enrich basic scientific knowledge.
Asunto(s)
Holoprosencefalia/patología , Fotogrametría , Preescolar , Femenino , HumanosRESUMEN
Lymphatic malformations (LMs) are rare, nonmalignant masses, frequently involving the head and neck, potentially causing impairment to the surrounding anatomical structures. Major LMs frequently cause facial disfigurement with obvious consequences on self-esteem and social functioning. The attempt to restore symmetry is thus one of the main goals of treatment. In this study, the authors present a not-invasive method to objectively quantify the symmetry of the labial area before and after surgical treatment of a LM, affecting a 16-year-old woman. This was done with sequential three-dimensional stereophotogrammetric imaging and morphometric measurements. The method showed a high reproducibility and supplied quantitative indicators of the local degree of symmetry, helping clinicians in its objective assessment, and facilitating treatment planning and evaluation. A quantitative appraisal of the results can additionally improve patient adherence to a usually multistage therapy.
Asunto(s)
Imagenología Tridimensional , Labio/diagnóstico por imagen , Labio/cirugía , Anomalías Linfáticas/diagnóstico por imagen , Anomalías Linfáticas/cirugía , Fotogrametría , Adolescente , Femenino , Humanos , Reproducibilidad de los ResultadosRESUMEN
Glut1 deficiency syndrome (Glut1-DS) is a neurological and metabolic disorder caused by impaired transport of glucose across the blood brain barrier (BBB). Mutations on the SCL2A1 gene encoding the glucose transporter protein in the BBB cause the syndrome, which encompasses epilepsy, movement disorders, and mental delay. Such variability of symptoms presents an obstacle to early diagnosis. The patients seem to share some craniofacial features, and identification and quantification of these could help in prompt diagnosis and clinical management. We performed a three-dimensional morphometric analysis of the faces of 11 female Glut1-DS patients using a stereophotogrammetric system. Data were analyzed using both inter-landmark distances and Principal Component Analysis. Compared with data collected from age-, sex-, and ethnicity-matched control subjects, common and homogenous facial features were identified among patients, which were mainly located in the mandible and the eyes. Glut1-DS patients had a more anterior chin; their mandibular body was longer but the rami were shorter, with a reduced gonial angle; they had smaller and down-slanted eyes with a reduced intercanthal distance. This study highlights the importance of morphometric analysis for defining the facial anatomical characteristics of the syndrome better, potentially helping clinicians to diagnose Glut1-DS. Improved knowledge of the facial anatomy of these patients can provide insights into their facial and cerebral embryological development, perhaps further clarifying the molecular basis of the syndrome. Clin. Anat. 30:644-652, 2017. © 2017 Wiley Periodicals, Inc.
Asunto(s)
Errores Innatos del Metabolismo de los Carbohidratos/patología , Cara/patología , Proteínas de Transporte de Monosacáridos/deficiencia , Adolescente , Adulto , Antropometría , Niño , Preescolar , Femenino , Humanos , FotogrametríaRESUMEN
PURPOSE: Anatomy of greater palatine foramen is important for maxillary nerve blocks, haemostatic procedures, and the treatment of neuralgia; although metrical data are available about its collocation, still several aspects need to be explored, such as the influence of the cranium size. METHODS: The position of greater palatine foramen was assessed on 100 skulls through six measurements (distances from intermaxillary suture, posterior palatal border, posterior nasal spine, and incisive foramen; palatal length; relative position on palatal length) and two angles (angles at incisive foramen and greater palatine foramen). Maximum cranial length, maximum cranial breadth, cranial height and bizygomatic breadth, horizontal cephalic index, and Giardina Y-index were evaluated. Possible differences according to sex and side were assessed through two-way ANOVA (p < 0.05). Measurements showing sexual dimorphism were further assessed through one-way ANCOVA including cranial parameters as covariates (p < 0.05). RESULTS: Distances of the greater palatine foramen from intermaxillary suture, incisive foramen, posterior palatal border, posterior nasal spine, palatal length, and position of the greater palatine foramen on the palatal length were statistically different according to sex (p < 0.05), independently from general cranial dimensions but for the distance from the posterior palatal border. The angle at the incisive foramen and distances from intermaxillary suture and from posterior nasal spine showed statistically significant differences according to side (p < 0.05). CONCLUSIONS: Results highlight that most of sexually dimorphic measurements useful for pinpointing the greater palatal foramen do not depend upon the cranium size. A more complete metrical assessment of the localization of the greater palatine foramen was provided.
Asunto(s)
Nervio Maxilar/anatomía & histología , Paladar Duro/anatomía & histología , Adulto , Anciano , Anciano de 80 o más Años , Proceso Alveolar/anatomía & histología , Puntos Anatómicos de Referencia , Variación Anatómica , Cadáver , Femenino , Humanos , Italia , Masculino , Persona de Mediana EdadRESUMEN
Uniqueness of ear morphology has been a widely debated issue in cephaloscopy, but past studies used only two-dimensional approaches. In the current investigation, the right and left ears of 10 healthy adults were imaged twice by stereophotogrammetry at the interval of a few seconds. The ear images obtained from the two acquisitions were superimposed both within subject (group of matches) and among subjects (group of mismatches). A point-to-point root mean square distance was calculated between the two three-dimensional models. Differences according to side and group were assessed by two-way analysis of variance. In total, 200 superimpositions were performed. On average, the point-to-point root mean square distance was 0.31 mm in cases of matches and 1.43 mm in cases of mismatches: differences were statistically significant (p < 0.01). Results provided quantitative data for the assessment of uniqueness of ear morphology, highlighting differences based on their three-dimensional morphology.
Asunto(s)
Cefalometría/métodos , Oído Externo/anatomía & histología , Adulto , Oído Externo/diagnóstico por imagen , Voluntarios Sanos , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Fotogrametría/métodos , Adulto JovenRESUMEN
PURPOSE: Surgical reconstruction of zygomatic bones in cases of traumatic injuries is a frequent event: assessment of symmetry is mandatory for a correct restoration of zygomatic shape, but the literature is discordant about its quantification. The purpose of this study is to show a novel method for assessing symmetry of zygomatic bone through mirroring of 3D models segmented on CT-scan. MATERIALS AND METHODS: A total of 100 patients (50 male and 50 female), divided into two age groups (18-49 years and 50-92 years) were selected from the computed tomography (CT) scan database of a hospital in northern Italy. Zygomatic bones from each patient were segmented, and the left bone was automatically mirrored and registered on the right one according to the least point-to-point distance between the two surfaces. The mean and root mean square (RMS) distance between the two models was then calculated. Statistically significant differences according to sex and age groups were assessed through two-way analysis of variance (p < 0.05). In addition, the effect size of differences was calculated. RESULTS: The method proved to be repeatable, with inter- and intraoperator errors lower than 5%. Overall, mean and RMS point-to-point distances were respectively 0.01 mm and 0.84 mm, without statistically significant differences according to sex or age (p > 0.05), and with negligible effect size. CONCLUSION: This study provides an innovative method for assessing the symmetry of the zygomatic bone based on surface analysis. Results may provide useful indications for the reconstruction of zygomatic bones in maxillofacial surgery.
Asunto(s)
Cigoma/diagnóstico por imagen , Adolescente , Adulto , Factores de Edad , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Imagenología Tridimensional , Masculino , Persona de Mediana Edad , Procedimientos de Cirugía Plástica , Factores Sexuales , Cirugía Bucal , Tomografía Computarizada por Rayos X , Adulto Joven , Cigoma/anatomía & histología , Cigoma/cirugíaRESUMEN
The present study compared the reliability of a low-cost laser scanner device to an already-validated stereophotogrammetric instrument. Fifty volunteers underwent duplicate facial scans through laser scanner and stereophotogrammetry. Intra- and inter-instrument reproducibility of linear distances, angles, facial surface area and volume was verified through the Bland-Altman test and calculation of absolute (TEM) and relative (rTEM) technical errors of measurement; rTEM was then classified as follows: <1% excellent; 1-3.9% very good; 4-6.9% good; 7-9.9% moderate; >10% poor. The scans performed through different devices were registered and superimposed to calculate the root mean square (RMS) (point-to-point) distance between the two surfaces. The same protocol was applied to a mannequin head. In inter-instruments comparison, 12/26 measurements showed a "good" rTEM; 5 were "very good". In intra-instrument comparison, most performances worsened, with only 10 of 26 measurements classified as "good" and "very good". All the measurements made on mannequin scans were at least "good", and 14/26 were "very good". Surface area was "very good" only in intra-instrument comparison; conversely, volumes were poorly repeatable for all the comparisons. On average, RMS point-to-point distances were 0.65 mm (inter-devices comparison), 0.56 mm (mannequin scans), 0.42 mm (intra-device comparison). In conclusion, the low-cost laser scan device can be reliably applied to inanimate objects, but does not meet the standards for three-dimensional facial acquisition on living persons.
Asunto(s)
Cara/anatomía & histología , Imagenología Tridimensional/instrumentación , Rayos Láser , Fotogrametría/instrumentación , Adulto , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador , Masculino , Persona de Mediana Edad , Reproducibilidad de los ResultadosRESUMEN
Laser scanner devices are acquiring a growing importance in facial anatomy. Most studies have analysed facial scans obtained through two simultaneous captures, whereas the same result can be obtained by consecutive three-dimensional (3D) scans. However, this latter procedure has not yet been validated. Fourteen volunteers underwent face image capture through stereophotogrammetry (VECTRA M3) and three consecutive facial scans through a laser scanner (Konica Minolta Vi910). The concordance between 14 linear distances, 12 angles, facial surface area and volume measurements was verified by the Bland-Altman test and calculation of absolute and relative technical errors of measurement (TEM/rTEM). The two facial images obtained by the different devices were then registered to calculate point-to-point distance. Most of linear distances and angles showed a high agreement, with "very good" or "good" rTEMs, ranging between 1.1% and 6.4%. Surface area measurements agreed well between the devices (rTEM: 6.3%), while volumes were poorly comparable (rTEM: 25.8%); the root mean square point-to-point distance was 0.80 mm (SD: 0.41). This study first tested the concordance of measurements on facial images obtained by stereophotogrammetry and consecutive laser scans. Results highlight the reliability of linear distances, angles and surface areas measurements, but discourage volume assessment and registration of surfaces acquired through different devices.
Asunto(s)
Cara/anatomía & histología , Imagenología Tridimensional , Fotogrametría , Adulto , Cara/diagnóstico por imagen , Humanos , Imagenología Tridimensional/métodos , Rayos Láser , Masculino , Persona de Mediana Edad , Reproducibilidad de los Resultados , Adulto JovenRESUMEN
Distinction of one twin with respect to the other, based on external appearance, is challenging; nevertheless, facial morphology may provide individualizing features that may help distinguish twin siblings. This study aims at exposing an innovative method for the facial assessment in monozygotic twins for personal identification, based on the registration and comparison of 3D models of faces. Ten couples of monozygotic twins aged between 25 and 69â¯years were acquired twice by a stereophotogrammetric system (VECTRA-3D® M3: Canfield Scientific, Inc., Fairfield, NJ); the 3D reconstruction of each person was then registered and superimposed onto the model belonging to the same person (self-matches), the corresponding sibling (twin-matches) and to unrelated participants from the other couples (miss-matches); RMS (root mean square) point-to-point distances were automatically calculated for all the 220 superimpositions. One-way ANOVA was used to evaluate the differences among miss-matches, twin-matches and self-matches (pâ¯<â¯.05). RMS values for self-matches, twin-matches and miss-matches were respectively 1.0â¯mm (SD: 0.3â¯mm), 1.9â¯mm (0.5â¯mm) and 3.4â¯mm (0.70â¯mm). Statistically significant differences were found among the three groups (pâ¯<â¯.01). Comparing RMS values in the three groups, mean facial variability in twin siblings was 55.9% of that assessed between unrelated persons and about twice higher than that observed between models belonging to the same individual. The present study proposed an innovative method for the facial assessment of twin siblings, based on 3D surface analysis, which may provide additional information concerning the relation between genes and environment.
Asunto(s)
Ambiente , Cara/anatomía & histología , Imagenología Tridimensional/métodos , Gemelos Monocigóticos , Adulto , Anciano , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Masculino , Persona de Mediana Edad , FotogrametríaRESUMEN
Alterations of facial muscles may critically humper patients' quality of life. One of the worst conditions is the reduction or abolition of eye blinking. To prevent these adverse effects, surgical rehabilitation of eyelid function is the current treatment choice. In the present paper, we present a modification of the technique devised by Nassif to recover lids from long-standing paralysis. In our modification, the upper lid is rehabilitated by a platisma graft innervated by the contralateral facial nerve branches using a cross-face sural nerve graft. The lower lid is pulled upward by a fascia lata string suspension. Fourteen patients with unilateral facial paralysis were operated on consecutively. For each patient, two sets of frontal photographs with open and closed eyes were available, before and after the surgical rehabilitation. On average, eyelid lumen with closed eyes decreased by 2.6 mm (SD 2.4) after surgical rehabilitation (37% of the initial value). With open eyes, the decrement was 1.5 mm (SD 1.6, 15%). The modifications were highly significant (p < 0.01), with very large effect sizes. Reanimation of the paralyzed eye by mean of cross-face nerve graft followed by platisma neurotization can restore natural eyelid closure and blink reflex.
Asunto(s)
Parpadeo , Párpados/inervación , Párpados/fisiopatología , Parálisis Facial/cirugía , Transferencia de Nervios , Sistema Músculo-Aponeurótico Superficial/trasplante , Nervio Sural/trasplante , Adolescente , Adulto , Anciano , Femenino , Humanos , Masculino , Persona de Mediana Edad , Adulto JovenRESUMEN
Many conditions can compromise facial symmetry, resulting in an impairment of the affected person from both esthetic and functional points of view. For these reasons, a detailed, focused, and objective evaluation of facial asymmetry is needed, both for surgical planning and for treatment evaluation. In this study, we present a new quantitative method to assess symmetry in different facial thirds, objectively defined on the territories of distribution of trigeminal branches. A total of 70 subjects (40 healthy controls and 30 patients with unilateral facial palsy) participated. A stereophotogrammetric system and the level of asymmetry of the subjects' hemi-facial thirds was evaluated, comparing the root mean square of the distances (RMSD) between their original and mirrored facial surfaces. Results show a high average reproducibility of area selection (98.8%) and significant differences in RMSD values between controls and patients (p = 0.000) for all of the facial thirds. No significant differences were found on different thirds among controls (p > 0.05), whereas significant differences were found for the upper, middle, and lower thirds of patients (p = 0.000). The presented method provides an accurate, reproducible, and local facial symmetry analysis that can be used for different conditions, especially when only part of the face is asymmetric.