Configurationally Chiral SuFEx-Based Polymers.

Novel methods to make synthetic chiral polymers are highly desirable given their potential in a rapidly increasing number of bio-inspired applications. The enantiospecific sulfur-fluorine exchange (SuFEx) reaction of chiral di-sulfonimidoyl fluorides (di-SFs) with diphenols, was used to produce high-molecular-weight chiral polymers with configurational backbone chirality. The resulting new class of polymers, polysulfonimidates, can be efficiently produced via this step-growth mechanism for a wide range of di-SFs and diphenols, yielding MnPS up to 283 kDa with a typical dispersity D around 1.6. The optical activity of the resulting chiral polymers is largely due to the intrinsic asymmetry of the S atoms (configurational chirality). Finally, the enantiospecificity (ee>98 %) of the polymerization reaction was demonstrated by the degradation of a disulfide-containing polysulfonimidate. This novel route towards configurational main-chain chirality opens up new approaches towards tailor-made chiral polymers with precisely defined properties.

Sulfur-Phenolate Exchange: SuFEx-Derived Dynamic Covalent Reactions and Degradation of SuFEx Polymers.

The products of the SuFEx reaction between sulfonimidoyl fluorides and phenols, sulfonimidates, are shown to display dynamic covalent chemistry with other phenols. This reaction was shown to be enantiospecific, finished in minutes at room temperature in high yields, and useful for both asymmetric synthesis and sustainable polymer production. Its wide scope further extends the usefulness of SuFEx and related click chemistries.

Efficient Chemical Surface Modification Protocol on SiO2 Transducers Applied to MMP9 Biosensing.

The bioreceptor immobilization process (biofunctionalization) turns to be one of the bottlenecks when developing a competent and high sensitivity label-free biosensor. Classical approaches seem to be effective but not efficient. Although biosensing capacities are shown in many cases, the performance of the biosensor is truncated by the inefficacious biofunctionalization protocol and the lack of reproducibility. In this work, we describe a unique biofunctionalization protocol based on chemical surface modification through silane chemistry on SiO2 optical sensing transducers. Even though silane chemistry is commonly used for sensing applications, here we present a different mode of operation, applying an unusual silane compound used for this purpose (3-Ethoxydimethylsilyl)propylamine, APDMS, able to create ordered monolayers, and minimizing fouling events. To endorse this protocol as a feasible method for biofunctionalization, we performed multiple surface characterization techniques after all the process steps: Contact angle (CA), X-ray photoelectron spectroscopy (XPS), ellipsometry, and fluorescence microscopy. Finally, to evidence the outputs from the SiO2 surface characterization, we used those SiO2 surfaces as optical transducers for the label-free biosensing of matrix metalloproteinase 9 (MMP9). We found and demonstrated that the originally designed protocol is reproducible, stable, and suitable for SiO2-based optical sensing transducers.

Fast room-temperature functionalization of silicon nanoparticles using alkyl silanols.

Silicon nanoparticles (Si NPs) are a good alternative to conventional heavy metal-containing quantum dots in many applications, due to their low toxicity, low cost, and the high natural abundance of the starting material. Recently, much synthetic progress has been made, and crystalline Si NPs can now be prepared in a matter of hours. However, the passivation of these particles is still a time-consuming and difficult process, usually requiring high temperatures and/or harsh reaction conditions. In this paper, we report an easy method for the room-temperature functionalization of hydrogen-terminated Si NPs. Using silanol compounds, a range of functionalized Si NPs could be produced in only 1 h reaction time at room temperature. The coated NPs were fully characterized to determine the efficiency of binding and the effects of coating on the optical properties of the NPs. It was found that Si NPs were effectively functionalized, and that coated NPs could be extracted from the reaction mixture in a straightforward manner. The silanol coating increases the quantum yield of fluorescence, decreases the spectral width and causes a small (∼50 nm) blue-shift in both the excitation and emission spectra of the Si NPs, compared to unfunctionalized particles.

A method to detect triplet exciton transfer from singlet fission materials into silicon solar cells: Comparing different surface treatments.

Singlet fission is one of the most promising routes to overcome the single-junction efficiency limit for solar cells. Singlet fission-enhanced silicon solar cells are the most desirable implementation, but transfer of triplet excitons, the product of singlet fission, into silicon solar cells has proved to be very challenging. Here, we report on an all optical measurement technique for the detection of triplet exciton quenching at semiconductor interfaces, a necessary requirement for triplet exciton or charge transfer. The method relies on the growth of individual, single-crystal islands of the singlet fission material on the silicon surface. The islands have different heights, and we correlate these heights to the quenching efficiency of triplet excitons. The quenching efficiency is measured by spatially resolved delayed fluorescence and compared to a diffusion-quenching model. Using silicon capped with a blocking thermal oxide and aromatic monolayers, we demonstrate that this technique can quickly screen different silicon surface treatments for triplet exciton quenching.

Systematic Comparison of Zwitterionic and Non-Zwitterionic Antifouling Polymer Brushes on a Bead-Based Platform.

Nonspecific adsorption of biomolecules to solid surfaces, a process called biofouling, is a major concern in many biomedical applications. Great effort has been made in the development of antifouling polymer coatings that are capable of repelling the nonspecific adsorption of proteins, cells, and micro-organisms. In this respect, we herein contribute to understanding the factors that determine which polymer brush results in the best antifouling coating. To this end, we compared five different monomers: two sulfobetaines, a carboxybetaine, a phosphocholine, and a hydroxyl acrylamide. The antifouling coatings were analyzed using our previously described bead-based method with flow cytometry as the read-out system. This method allows for the quick and automated analysis of thousands of beads per second, enabling fast analysis and good statistics. We report the first direct comparison made between a sulfobetaine with opposite charges separated by two and three methylene groups and a carboxybetaine bearing two separating methylene groups. It was concluded that both the distance between opposite charges and the nature of the anionic groups have a distinct effect on the antifouling performance. Phosphocholines and simple hydroxyl acrylamides are not often compared with the betaines. However, here we found that they perform equally well or even better, yielding the following overall antifouling ranking: HPMAA ≥ PCMA-2 ≈ CBMAA-2 > SBMAA-2 > SBMAA-3 ≫ nonmodified beads (HPMAA being the best).

One-Step Generation of Reactive Superhydrophobic Surfaces via SiHCl3-Based Silicone Nanofilaments.

Superhydrophobic surfaces gain ever-growing attention because of their applicability in many (consumer) products/materials as they often display, among others, antifouling, anti-icing, and/or self-cleaning properties. A simple way to achieve superhydrophobicity is through the growth of silicone nanofilaments. These nanofilaments, however, are very often nonreactive and thus difficult to utilize in subsequent chemistries. In response, we have developed a single-step procedure to grow (SiHCl3-based) silicone nanofilaments with selective reactivity that are intrinsically superhydrophobic. The silicone nanofilaments could be further functionalized via Pt-catalyzed hydrosilylation of exposed Si-H moieties. These surfaces are easily obtained using mild conditions and are stable under hydrolytic conditions (neutral water, 24 h at 80 °C) while remaining highly transparent, which makes them well suited for optical and photochemical experiments.

Approach Matters: The Kinetics of Interfacial Inverse-Electron Demand Diels-Alder Reactions.

Rapid and quantitative click functionalization of surfaces remains an interesting challenge in surface chemistry. In this regard, inverse electron demand Diels-Alder (IEDDA) reactions represent a promising metal-free candidate. Herein, we reveal quantitative surface functionalization within 15 min. Furthermore, we report the comprehensive effects of substrate stereochemistry, surrounding microenvironment and substrate order on the reaction kinetics as obtained by surface-bound mass spectrometry (DART-HRMS).

Organic Monolayers by B(C6F5)3-Catalyzed Siloxanation of Oxidized Silicon Surfaces.

Inspired by the homogeneous catalyst tris(pentafluorophenyl) borane [B(C6F5)3], which acts as a promotor of Si-H bond activation, we developed and studied a method of modifying silicon oxide surfaces using hydrosilanes with B(C6F5)3 as the catalyst. This dedihydrosiloxanation reaction yields complete surface coverage within 10 min at room temperature. Organic monolayers derived from hydrosilanes with varying carbon chain lengths (C8-C18) were prepared on oxidized Si(111) surfaces, and the thermal and hydrolytic stabilities of the obtained monolayers were investigated in acidic (pH 3) medium, basic (pH 11) medium, phosphate-buffered saline (PBS), and deionized water (neutral conditions) for up to 30 days. DFT calculations were carried out to gain insight into the mechanism, and the computational results support a mechanism involving silane activation with B(C6F5)3. This catalyzed reaction path proceeds through a low-barrier-height transition state compared to the noncatalyzed reaction path.

High-Density Modification of H-Terminated Si(111) Surfaces Using Short-Chain Alkynes.

H-Si(111)-terminated surfaces were alkenylated via two routes: through a novel one-step gas-phase hydrosilylation reaction with short alkynes (C3 to C6) and for comparison via a two-step chlorination and Grignard alkenylation process. All modified surfaces were characterized by static water contact angles and X-ray photoelectron spectroscopy (XPS). Propenyl- and butenyl-coated Si(111) surfaces display a significantly higher packing density than conventional C10-C18 alkyne-derived monolayers, showing the potential of this approach. In addition, propyne chemisorption proceeds via either of two approaches: the standard hydrosilylation at the terminal carbon (lin) at temperatures above 90 °C and an unprecedented reaction at the second carbon (iso) at temperatures below 90 °C. Molecular modeling revealed that the packing energy of a monolayer bonded at the second carbon is significantly more favorable, which drives iso-attachment, with a dense packing of surface-bound iso-propenyl chains at 40% surface coverage, in line with the experiments at <90 °C. The highest density monolayers are obtained at 130 °C and show a linear attachment of 1-propenyl chains with 92% surface coverage.

Universal Calibration of Computationally Predicted N 1s Binding Energies for Interpretation of XPS Experimental Measurements.

Computationally predicted N 1s core level energies are commonly used to interpret the experimental measurements obtained with X-ray photoelectron spectroscopy. This work compares the application of Koopmans' theorem to core electrons using the B3LYP functional with two commonly used basis sets, analyzes the factors relevant to the comparison of the computational with experimental data, and presents several correlations that allow an accurate prediction of the N 1s binding energy. The first correlation is obtained with a series of known nitrogen-containing functional groups on well-characterized organic monolayers. This approach can then be reliably extended to a number of nitrogen-containing chemical systems on silicon surfaces in which the nature of the chemical environment of nitrogen atoms had only been proposed based on a number of analytical techniques. In most of those cases, the XPS analysis is consistent with the proposed structures, but is not always sufficient for conclusive assignments. Third, it was attempted to also include N-containing systems on metals. Despite the admittedly oversimplified approach taken in this case (the metal surface is approximated by a single atom), the observed correlations are still experimentally useful, although in this case significant outliers are found. Finally, previously published correlations between experimental and theoretical C 1s data were reexamined, yielding a set of correlations that allow experimentalists to predict C 1s and N 1s XPS spectra with high accuracy.

Mild Photochemical Biofunctionalization of Glass Microchannels.

The ability to locally modify the inside of microfluidic channels with bioactive molecules is of ever-rising relevance. In this article, we show the direct photochemical coupling of a N-hydroxysuccinimide-terminated ω-alkene onto hydrogen-terminated silicon oxide, and its subsequent functionalization with a catalytically active DNAzyme. To achieve this local attachment of a DNAzyme, we prepared hydrogen-phenyl-terminated glass (H-Φ-glass) by the reaction of glass with H-SiPhCl2. The presence of a radical-stabilizing substituent on the Si atom (i.e., phenyl) enabled the covalent modification of bare glass substrates and of the inside of glass microchannels with a functional organic monolayer that allowed direct reaction with an amine-functionalized biomolecule. In this study, we directly attached an NHS-functionalized alkene to the modified glass surface using light with a wavelength of 328 nm, as evidenced by SCA, G-ATR, XPS, SEM, AFM and fluorescence microscopy. Using these NHS-based active esters on the surface, we performed a direct localized attachment of a horseradish peroxidase (HRP)-mimicking hemin/G-quadruplex (hGQ) DNAzyme complex inside a microfluidic channel. This wall-coated hGQ DNAzyme effectively catalyzed the in-flow oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) [ABTS] in the presence of hydrogen peroxide. This proof-of-concept of mild biofunctionalization will allow the facile preparation of modified microchannels for myriad biorelevant applications.

Local Light-Induced Modification of the Inside of Microfluidic Glass Chips.

The ability to locally functionalize the surface of glass allows for myriad biomedical and chemical applications. This would be the case if the surface functionalization can be induced using light with wavelengths for which standard glass is almost transparent. To this aim, we present the first example of a photochemical modification of hydrogen-terminated glass (H-glass) with terminal alkenes. Both flat glass surfaces and the inside of glass microchannels were modified with a well-defined, covalently attached organic monolayer using a range of wavelengths, including sub-band-gap 302 nm ultraviolet light. A detailed characterization thereof was conducted by measurements of the static water contact angle, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and scanning Auger microscopy (SAM). Germanium attenuated total reflection Fourier transform infrared (GATR-FTIR) indicates that the mechanism of the surface modification proceeds via an anti-Markovnikov substitution. Reacting H-glass with 10-trifluoro-acetamide-1-decene (TFAAD) followed by basic hydrolysis affords the corresponding primary amine-terminated monolayer, enabling additional functionalization of the substrate. Furthermore, we show the successful formation of a photopatterned amine layer by the specific attachment of fluorescent nanoparticles in very discrete regions. Finally, a microchannel was photochemically patterned with a functional linker allowing for surface-directed liquid flow. These results demonstrate that H-glass can be modified with a functional tailor-made organic monolayer, has highly tunable wetting properties, and displays significant potential for further applications.

Effect of α-Heteroatoms on the Formation of Alkene-Derived Monolayers on H-Si(111): A Combined Experimental and Theoretical Study.

We investigate herein whether the reactivity and surface coverage of 1-alkenes toward hydrogen-terminated Si(111) surfaces [H-Si(111)] can be improved by introducing heteroatoms such as oxygen and sulfur at the α-position next to the alkene functional group. To this end, the reactivity of 1-pentene, 1-pentyne, vinyl ethyl ether, and vinyl ethyl sulfide toward H-Si(111) and the surface coverage of the resulting monolayers were studied and compared. All modified surfaces were characterized by static water contact angle measurements, ellipsometry, X-ray photoelectron spectroscopy (XPS), and infrared absorption reflection spectroscopy (IRRAS). Quantum chemical calculations were performed to calculate the activation barriers and driving forces for monolayer formation at the M11-L/6-311G(d,p) level of theory. Both experiments and theory indicate that the presence of α-heteroatoms next to the alkene function improved both the reactivity and surface coverage on H-terminated Si(111) surfaces.

Micropatterned ferrocenyl monolayers covalently bound to hydrogen-terminated silicon surfaces: effects of pattern size on the cyclic voltammetry and capacitance characteristics.

The effect of the size of patterns of micropatterned ferrocene (Fc)-functionalized, oxide-free n-type Si(111) surfaces was systematically investigated by electrochemical methods. Microcontact printing with amine-functionalized Fc derivatives was performed on a homogeneous acid fluoride-terminated alkenyl monolayer covalently bound to n-type H-terminated Si surfaces to give Fc patterns of different sizes (5 × 5, 10 × 10, and 20 × 20 µm(2)), followed by backfilling with n-butylamine. These Fc-micropatterned surfaces were characterized by static water contact angle measurements, ellipsometry, X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRRAS), atomic force microscopy (AFM), and scanning electron microscopy (SEM). The charge-transfer process between the Fc-micropatterned and underlying Si interface was subsequently studied by cyclic voltammetry and capacitance. By electrochemical studies, it is evident that the smallest electroactive ferrocenyl patterns (i.e., 5 × 5 µm(2) squares) show ideal surface electrochemistry, which is characterized by narrow, perfectly symmetric, and intense cyclic voltammetry and capacitance peaks. In this respect, strategies are briefly discussed to further improve the development of photoswitchable charge storage microcells using the produced redox-active monolayers.

Adhesion and friction properties of fluoropolymer brushes: on the tribological inertness of fluorine.

The effects of fluorination on the adhesion and friction properties of covalently bound poly(fluoroalkyl methacrylate) polymer brushes (thickness ∼80 nm) were systematically investigated. Si(111) surfaces were functionalized with a covalently bound initiator via a thiol-yne click reaction to have a high surface coverage for initiator immobilization. Surface-initiated atom-transfer radical polymerization (SI-ATRP) was employed for the synthesis of four different fluoropolymer brushes (SPFx, where x = 0, 3, 7, or 17 F atoms per monomer), based on fluoroalkyl methacrylates. All polymer brushes were characterized with static contact angle measurements, X-ray photoelectron spectroscopy (XPS), and infrared absorption reflection spectroscopy (IRRAS). The polymer brushes exhibited an excellent hydrophobicity, with static water contact angles of up to 121° depending on the number of fluorine atoms per side chain in fluoroalkyl methacrylate. The degree of swelling was precisely studied by using ellipsometry in different solvents such as acetone, hexadecane, hexafluoroisopropanol, nonafluorobutyl methyl ether, and Fluorinert FC-40. The polymer brushes have shown nanoscale swelling behavior in all solvents except hexadecane. The grafting density decreased upon increasing fluorine content in polymer brushes from 0.65 chains/nm(2) (SPF0) to 0.10 chains/nm(2) (SPF17) as observed in Fluorinert FC-40 as a good solvent. Adhesion and friction force measurements were conducted with silica colloidal probe atomic force microscopy (CP-AFM) under ambient, dry (argon), and lubricating fluid conditions. SPF17 showed the lowest coefficient of friction 0.005 under ambient condition (RH = 44 ± 2%) and a further decrease with 50% under fluidic conditions. These polymer brushes also showed adhesion forces as low as 6.9 nN under ambient conditions, which further went down to 0.003 nN under fluidic conditions (Fluorinert FC-40 and hexadecane) at 10 nN force.

Adhesion and friction properties of polymer brushes: fluoro versus nonfluoro polymer brushes at varying thickness.

A series of different thicknesses of fluoro poly(2,2,2-trifluoroethyl methacrylate) and its analogous nonfluoro poly(ethyl methacrylate) polymer brushes were prepared via surface-initiated ATRP (SI-ATRP) on Si(111) surfaces. The thiol-yne click reaction was used to immobilize the SI-ATRP initiator with a high surface coverage, in order to achieve denser polymer brushes (grafting density from ~0.1 to 0.8 chains/nm(2)). All polymer brushes were characterized by static water contact angle measurements, infrared absorption reflection spectroscopy, and X-ray photoelectron spectroscopy. Adhesion and friction force measurements were conducted with silica colloidal probe atomic force microscopy (CP-AFM) under ambient and dry (argon) conditions. The fluoro poly(2,2,2-trifluoroethyl methacrylate) polymer showed a decrease in adhesion and friction with increasing thickness. The analogous nonfluoro poly(ethyl methacrylate) polymer brushes showed high adhesion and friction under ambient conditions. Friction coefficients down to 0.0057 (ambient conditions) and 0.0031 (dry argon) were obtained for poly(2,2,2-trifluoroethyl methacrylate) polymer brushes with 140 nm thickness, which are the lowest among these types of polymer brushes.

Hydrolytic and thermal stability of organic monolayers on various inorganic substrates.

A comparative study is presented of the hydrolytic and thermal stability of 24 different kinds of monolayers on Si(111), Si(100), SiC, SiN, SiO2, CrN, ITO, PAO, Au, and stainless steel surfaces. These surfaces were modified utilizing appropriate organic compounds having a constant alkyl chain length (C18), but with different surface-reactive groups, such as 1-octadecene, 1-octadecyne, 1-octadecyltrichlorosilane, 1-octadecanethiol, 1-octadecylamine and 1-octadecylphosphonic acid. The hydrolytic stability of obtained monolayers was systematically investigated in triplicate in constantly flowing aqueous media at room temperature in acidic (pH 3), basic (pH 11), phosphate buffer saline (PBS) and deionized water (neutral conditions), for a period of 1 day, 7 days, and 30 days, yielding 1152 data points for the hydrolytic stability. The hydrolytic stability was monitored by static contact angle measurements and X-ray photoelectron spectroscopy (XPS). The covalently bound alkyne monolayers on Si(111), Si(100), and SiC were shown to be among the most stable monolayers under acidic and neutral conditions. Additionally, the thermal stability of 14 different monolayers was studied in vacuum using XPS at elevated temperatures (25-600 °C). Similar to the hydrolytic stability, the covalently bound both alkyne and alkene monolayers on Si(111), Si(100) and SiC started to degrade from temperatures above 260 °C, whereas on oxide surfaces (e.g., PAO) phosphonate monolayers even displayed thermal stability up to ∼500 °C.

Covalent surface modification of oxide surfaces.

The modification of surfaces by the deposition of a robust overlayer provides an excellent handle with which to tune the properties of a bulk substrate to those of interest. Such control over the surface properties becomes increasingly important with the continuing efforts at down-sizing the active components in optoelectronic devices, and the corresponding increase in the surface area/volume ratio. Relevant properties to tune include the degree to which a surface is wetted by water or oil. Analogously, for biosensing applications there is an increasing interest in so-called "romantic surfaces": surfaces that repel all biological entities, apart from one, to which it binds strongly. Such systems require both long lasting and highly specific tuning of the surface properties. This Review presents one approach to obtain robust surface modifications of the surface of oxides, namely the covalent attachment of monolayers.

Tribology and stability of organic monolayers on CrN: a comparison among silane, phosphonate, alkene, and alkyne chemistries.

The fabrication of chemically and mechanically stable monolayers on the surfaces of various inorganic hard materials is crucial to the development of biomedical/electronic devices. In this Article, monolayers based on the reactivity of silane, phosphonate, 1-alkene, and 1-alkyne moieties were obtained on the hydroxyl-terminated chromium nitride surface. Their chemical stability and tribology were systematically investigated. The chemical stability of the modified CrN surfaces was tested in aqueous media at 60 °C at pH 3, 7, and 11 and monitored by static water contact angle measurements, X-ray photoelectron spectroscopy (XPS), ellipsometry, and Fourier transform infrared reflection absorption spectroscopy (FT-IRRAS). The tribological properties of the resulting organic monolayers with different end groups (fluorinated or nonfluorinated) were studied using atomic force microscopy (AFM). It was found that the fluorinated monolayers exhibit a dramatic reduction of adhesion and friction force as well as excellent wear resistance compared to those of nonfluorinated coatings and bare CrN substrates. The combination of remarkable chemical stability and superior tribological properties makes these fluorinated monolayers promising candidates for the development of robust high-performance devices.