Sugar Beet Root Storage Properties Are Unaffected by Cercospora Leaf Spot.

Cercospora leaf spot (CLS; causal agent Cercospora beticola Sacc.) is endemic in many sugar beet production regions due to the widespread distribution of C. beticola and the inability of current management practices to provide complete control of the disease. Roots harvested from plants with CLS, therefore, are inevitably incorporated into sugar beet root storage piles, even though the effects of CLS on root storage properties are largely unknown. Research was conducted to determine the effects of CLS on storage properties including root respiration rate, sucrose loss, invert sugar accumulation, loss in recoverable sucrose yield, and changes in sucrose loss to molasses with respect to CLS disease severity and storage duration. Roots were obtained from plants with four levels of CLS severity in each of three production years, stored at 5°C and 95% relative humidity for up to 120 days, and evaluated for storage characteristics after 30, 90, and 120 days storage. No significant or repeatable effects of CLS on root respiration rate, sucrose loss, invert sugar accumulation, loss in recoverable sucrose yield, or change in sucrose loss to molasses were detected after 30, 90, or 120 days storage regardless of the severity of CLS disease symptoms. Therefore, no evidence was found that CLS accelerates sugar beet storage losses, and it is concluded that roots harvested from plants with CLS can be stored without additional or specialized precaution, regardless of CLS symptom severity.

Histopathological Investigation of Varietal Responses to Cercospora beticola Infection Process on Sugar Beet Leaves.

Cercospora leaf spot (CLS) is the most destructive foliar disease in sugar beet (Beta vulgaris). It is caused by Cercospora beticola Sacc., a fungal pathogen that produces toxins and enzymes which affect membrane permeability and cause cell death during infection. In spite of its importance, little is known about the initial stages of leaf infection by C. beticola. Therefore, we investigated the progression of C. beticola on leaf tissues of susceptible and resistant sugar beet varieties at 12-h intervals during the first 5 days after inoculation using confocal microscopy. Inoculated leaf samples were collected and stored in DAB (3,3'-diaminobenzidine) solution until processed. Samples were stained with Alexa Fluor-488-WGA dye to visualize fungal structures. Fungal biomass accumulation, reactive oxygen species (ROS) production, and the area under the disease progress curve were evaluated and compared. ROS production was not detected on any variety before 36 h postinoculation (hpi). C. beticola biomass accumulation, percentage leaf cell death, and disease severity were all significantly greater in the susceptible variety compared with the resistant variety (P < 0.05). Conidia penetrated directly through stomata between 48 to 60 hpi and produced appressoria on stomatal guard cells at 60 to 72 hpi in susceptible and resistant varieties, respectively. Penetration of hyphae inside the parenchymatous tissues varied in accordance with time postinoculation and varietal genotypes. Overall, this study provides a detailed account to date of events leading to CLS disease development in two contrasting varieties.

Resistance to QoI and DMI Fungicides Does Not Reduce Virulence of C. beticola Isolates in North Central United States.

Cercospora leaf spot (CLS) is a destructive disease limiting sugar beet production and is managed using resistant cultivars, crop rotation, and timely applications of effective fungicides. Since 2016, its causal agent, Cercospora beticola, has been reported to be resistant to quinone outside inhibitors (QoIs) and to have reduced sensitive to demethylation inhibitors (DMIs) in sugar beet growing areas in North Dakota and Minnesota. Isolates of C. beticola resistant to QoIs, DMIs, and both QoIs and DMIs were collected from fields in Foxhome, Minnesota, in 2017. Fitness of these resistant isolates was compared with that of QoI- and DMI-sensitive isolates in laboratory and greenhouse studies. In the lab, mycelial growth, spore production, and spore germination were measured. The results showed that resistant isolates had significantly less mycelial growth and spore production than sensitive isolates, while no significant difference in spore germination was detected. In the greenhouse, six leaf-stage sugar beets were inoculated with a spore suspension made from each resistant group and incubated in separate humidity chambers. CLS disease severity was evaluated visually at 7, 14, and 21 days after inoculation (DAI), and the areas under disease progress curve (AUDPC) were calculated. Resistant isolates had significantly smaller AUDPC but still caused as high disease severity as the sensitive ones at 21 DAI. Although QoI- and/or DMI-resistant isolates had a relatively slower disease development, they still caused high disease severity and need to be factored in disease management practices.

Age-Dependent Resistance to Rhizoctonia solani in Sugar Beet.

Rhizoctonia crown and root rot of sugar beet (Beta vulgaris L.), caused by Rhizoctonia solani, continues to be one of the important concerns for the beet industry in Minnesota and North Dakota. Use of resistant cultivars is an important strategy in the management of R. solani in combination with seed treatment and timely fungicide application during the growing season. The objective of this greenhouse study was to determine how sugar beet plants responded to increasing age in resistance to R. solani. Each of three seed companies provided three commercial cultivars with varying R. solani resistance levels: susceptible, moderately resistant, and resistant. Seed were planted at a weekly interval to create different plant age groups from seed to 10-week-old plants, with growing degree days (GDD) ranging from 0 to 1,519 thermal time (°Cd). Seed and plants were all simultaneously inoculated with R. solani AG2-2-infested barley grains. Twenty-eight days after inoculation, plants were pulled and washed, and roots were evaluated for disease severity. All cultivars were highly susceptible to R. solani when inoculated at seed to 3 weeks old (0 to 464°Cd). At 4 and 5 weeks of plant age (617 to 766°Cd), resistant cultivars started to show significant resistance to R. solani. Proportion of the affected roots with disease score ≥ 5 followed a sigmoid response, declining with increased GDD in moderately resistant and resistant cultivars, whereas it continued to decline linearly with increased GDD in susceptible cultivars. This study demonstrated that sugar beet cultivars, regardless of their assigned level of R. solani resistance, were highly susceptible to the pathogen before they reached the six- to eight-leaf stage at 4 to 5 weeks (617 to 766°Cd) after planting. Therefore, additional protection in the form of seed treatment or fungicide application may be required to protect sensitive sugar beet seed and seedlings in fields with a history of R. solani under favorable environmental conditions.

Co-inoculation timing affects the interspecific interactions between phoma stem canker pathogens Leptosphaeria maculans and Leptosphaeria biglobosa.

BACKGROUND: Phoma stem canker is an economically important disease of oilseed rape, caused by two co-existing fungal pathogen species, Leptosphaeria maculans (Plenodomus lingam) and Leptosphaeria biglobosa (Plenodomus biglobosus). Leptosphaeria maculans produces a phytotoxin called sirodesmin PL. Our previous work showed that L. biglobosa has an antagonistic effect on the production of sirodesmin PL if it is simultaneously co-inoculated with L. maculans. However, the effects of sequential co-inoculation on interspecific interactions between the two pathogens are not understood. RESULTS: The interactions between L. maculans and L. biglobosa were investigated in liquid culture by inoculation with L. maculans first, followed by L. biglobosa sequentially at 1, 3, 5 or 7 days later and vice versa; the controls were inoculated with L. maculans only, L. biglobosa only, or L. maculans and L. biglobosa simultaneously. The results showed that L. biglobosa inhibited the growth of L. maculans, the production of both sirodesmin PL and its precursors if L. biglobosa was inoculated before, or simultaneously with, L. maculans. However, the antagonistic effects of L. biglobosa were lost if it was co-inoculated 5 or 7 days after L. maculans. CONCLUSION: For the first time, the results of this study provided evidence that the timing when L. maculans and L. biglobosa meet significantly influences the outcome of the interspecific competition between them. Leptosphaeria biglobosa can inhibit the production of sirodesmin PL and the growth of L. maculans if it is inoculated before L. maculans or less than 3 days after L. maculans in liquid culture. There is a need to further investigate the timing of co-inoculation on interactions between L. maculans and L. biglobosa in their host plants for improving the control of phoma stem canker. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Transcriptomics of temperature-sensitive R gene-mediated resistance identifies a WAKL10 protein interaction network.

Understanding temperature-sensitivity of R gene-mediated resistance against apoplastic pathogens is important for sustainable food production in the face of global warming. Here, we show that resistance of Brassica napus cotyledons against Leptosphaeria maculans was temperature-sensitive in introgression line Topas-Rlm7 but temperature-resilient in Topas-Rlm4. A set of 1,646 host genes was differentially expressed in Topas-Rlm4 and Topas-Rlm7 in response to temperature. Amongst these were three WAKL10 genes, including BnaA07g20220D, representing the temperature-sensitive Rlm7-1 allele and Rlm4. Network analysis identified a WAKL10 protein interaction cluster specifically for Topas-Rlm7 at 25 °C. Diffusion analysis of the Topas-Rlm4 network identified WRKY22 as a putative regulatory target of the ESCRT-III complex-associated protein VPS60.1, which belongs to the WAKL10 protein interaction community. Combined enrichment analysis of gene ontology terms considering gene expression and network data linked vesicle-mediated transport to defence. Thus, dysregulation of effector-triggered defence in Topas-Rlm7 disrupts vesicle-associated resistance against the apoplastic pathogen L. maculans.

Quantitative Trait Locus Mapping for Resistance Against Pyrenopeziza brassicae Derived From a Brassica napus Secondary Gene Pool.

Use of host resistance is the most economical and environmentally safe way to control light leaf spot disease of oilseed rape (Brassica napus). The causal organism of light leaf spot, Pyrenopeziza brassicae, is one of the most economically damaging pathogens of oilseed rape in the United Kingdom and it is considered to have a high potential to evolve due to its mixed reproduction system and airborne ascospores. This necessitates diverse sources of host resistance, which are inadequate at present to minimize yield losses caused by this disease. To address this, we screened a doubled haploid (DH) population of oilseed rape, derived from a secondary gene pool (ancestral genomes) of B. napus for the introgression of resistance against P. brassicae. DH lines were phenotyped using controlled-environment and glasshouse experiments with P. brassicae populations obtained from three different geographic locations in the United Kingdom. Selected DH lines with different levels of resistance were further studied in a controlled-environment experiment using both visual (scanning electron microscope - SEM) and molecular (quantitative PCR) assessment methods to understand the mode/s of host resistance. There was a clear phenotypic variation for resistance against P. brassicae in this DH population. Quantitative trait locus (QTL) analysis identified four QTLs with moderate to large effects, which were located on linkage groups C1, C6, and C9. Of these, the QTL on the linkage group C1 appeared to have a major effect on limiting P. brassicae asexual sporulation. Study of the sub-cuticular growth phase of P. brassicae using qPCR and SEM showed that the pathogen was able to infect and colonise both resistant and susceptible Q DH lines and control B. napus cultivars. However, the rate of increase of pathogen biomass was significantly smaller in resistant lines, suggesting that the resistance segregating in this DH population limits colonisation/sporulation by the pathogen rather than eliminating the pathogen. Resistance QTLs identified in this study provide a useful resource for breeding cultivar resistance for effective control of light leaf spot and form a starting point for functional identification of the genes controlling resistance against P. brassicae that can contribute to our knowledge on mechanisms of partial resistance of crops against pathogens.

Distribution and Biodiversity of Seed-Borne Pathogenic and Toxigenic Fungi of Maize in Egypt and Their Correlations with Weather Variables.

Studies of the biodiversity of plant pathogenic and toxigenic fungi are attracting great attention to improve the predictability of their epidemics and the development of their control programs. Two hundred maize grain samples were gathered from 25 maize-growing governorates in Egypt and 189 samples were processed for the isolation and identification of seed-borne fungal microbiome. Twenty-six fungal genera comprising 42 species were identified according to their morphological characteristics and ITS DNA sequence analysis. Occurrence and biodiversity indicators of these fungal species were calculated. Ustilago maydis, Alternaria alternata, Aspergillus flavus, A. niger, Penicillium spp., Cladosporium spp. and Fusarium verticillioides were the highly frequent (>90% for each), recording the highest relative abundance (˃50%). Al-Menia governorate showed the highest species diversity and richness, followed by Sohag, Al-Nobaria and New Valley governorates. Correlations of 18 fungal species with temperature, relative humidity, precipitation, wind speed, and solar radiation were analyzed using canonical correspondence analysis. Results showed that relative humidity, temperature, and wind speed, respectively, were the most impactful weather variables. However, the occurrence and distribution of these fungi were not clearly grouped into the distinctive climatic regions in which maize crops are grown. Monitoring the occurrence and distribution of the fungal pathogens of maize grains in Egypt will play an important role in predicting their outbreaks and developing appropriate future management strategies. The findings in this study may be useful to other maize-growing countries that have similar climatic conditions.

Leptosphaeria biglobosa inhibits the production of sirodesmin PL by L. maculans.

BACKGROUND: Phoma stem canker is caused by two coexisting pathogens, Leptosphaeria maculans and L. biglobosa. They coexist because of their temporal and spatial separations, which are associated with the differences in timing of their ascospore release. L. maculans produces sirodesmin PL, while L. biglobosa does not. However, their interaction/coexistence in terms of secondary metabolite production is not understood. RESULTS: Secondary metabolites were extracted from liquid cultures, L. maculans only (Lm only), L. biglobosa only (Lb only), L. maculans and L. biglobosa simultaneously (Lm&Lb) or sequentially 7 days later (Lm+Lb). Sirodesmin PL or its precursors were identified in extracts from 'Lm only' and 'Lm+Lb', but not from 'Lm&Lb'. Metabolites from 'Lb only', 'Lm&Lb' or 'Lm+Lb' caused significant reductions in L. maculans colony area. However, only the metabolites containing sirodesmin PL caused a significant reduction to L. biglobosa colony area. When oilseed rape cotyledons were inoculated with conidia of 'Lm only', 'Lb only' or 'Lm&Lb', 'Lm only' produced large gray lesions, while 'Lm&Lb' produced small dark lesions similar to lesions caused by 'Lb only'. Sirodesmin PL was found only in the plant extracts from 'Lm only'. These results suggest that L. biglobosa prevents the production of sirodesmin PL and its precursors by L. maculans when they grow simultaneously in vitro or in planta. CONCLUSION: For the first time, L. biglobosa has been shown to inhibit the production of sirodesmin PL by L. maculans when interacting simultaneously with L. maculans either in vitro or in planta. This antagonistic effect of interspecific interaction may affect their coexistence and subsequent disease progression and management. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Influence of Elevated Temperatures on Resistance Against Phoma Stem Canker in Oilseed Rape.

Cultivar resistance is an important tool in controlling pathogen-related diseases in agricultural crops. As temperatures increase due to global warming, temperature-resilient disease resistance will play an important role in crop protection. However, the mechanisms behind the temperature-sensitivity of the disease resistance response are poorly understood in crop species and little is known about the effect of elevated temperatures on quantitative disease resistance. Here, we investigated the effect of temperature increase on the quantitative resistance of Brassica napus against Leptosphaeria maculans. Field experiments and controlled environment inoculation assays were done to determine the influence of temperature on R gene-mediated and quantitative resistance against L. maculans; of specific interest was the impact of high summer temperatures on the severity of phoma stem canker. Field experiments were run for three consecutive growing seasons at various sites in England and France using twelve winter oilseed rape breeding lines or cultivars with or without R genes and/or quantitative resistance. Stem inoculation assays were done under controlled environment conditions with four cultivars/breeding lines, using avirulent and virulent L. maculans isolates, to determine if an increase in ambient temperature reduces the efficacy of the resistance. High maximum June temperature was found to be related to phoma stem canker severity. No temperature effect on stem canker severity was found for the cultivar ES Astrid (with only quantitative resistance with no known R genes). However, in the controlled environmental conditions, the cultivar ES Astrid had significantly smaller amounts of necrotic tissue at 20°C than at 25°C. This suggests that, under a sustained temperature of 25°C, the efficacy of quantitative resistance is reduced. Findings from this study show that temperature-resilient quantitative resistance is currently available in some oilseed cultivars and that efficacy of quantitative resistance is maintained at increased temperature but not when these elevated temperatures are sustained for a long period.

Effective control of Leptosphaeria maculans increases importance of L. biglobosa as a cause of phoma stem canker epidemics on oilseed rape.

BACKGROUND: Phoma stem canker is a damaging disease of oilseed rape caused by two related fungal species, Leptosphaeria maculans and L. biglobosa. However, previous work has mainly focused on L. maculans and there has been little work on L. biglobosa. This work provides evidence of the importance of L. biglobosa to stem canker epidemics in the UK. RESULTS: Quantification of L. maculans and L. biglobosa DNA using species-specific quantitative PCR showed that L. biglobosa caused both upper stem lesions and stem base cankers on nine oilseed rape cultivars in the UK. Upper stem lesions were mainly caused by L. biglobosa. For stem base cankers, there was more L. maculans DNA than L. biglobosa DNA in the susceptible cultivar Drakkar, while there was more L. biglobosa DNA than L. maculans DNA in cultivars with the resistance gene Rlm7 against L. maculans. The frequency of L. biglobosa detected in stem base cankers increased from 14% in 2000 to 95% in 2013. Ascospores of L. biglobosa and L. maculans were mostly released on the same days and the number of L. biglobosa ascospores in air samples increased from the 2010/2011 to 2012/2013 growing seasons. CONCLUSION: Effective control of L. maculans increased infection by L. biglobosa, causing severe upper stem lesions and stem base cankers, leading to yield losses. The importance of L. biglobosa to phoma stem canker epidemics can no longer be ignored. Effective control of phoma stem canker epidemics needs to target both L. maculans and L. biglobosa. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Biodiversity of Pathogenic and Toxigenic Seed-Borne Mycoflora of Wheat in Egypt and Their Correlations with Weather Variables.

Surveillance investigations for pathogenic and toxigenic fungi are important to refine our understanding of their epidemiology and help in predicting their outbreaks. During 2019, 198 samples of wheat grains were collected from 25 wheat-growing governorates in Egypt to detect and identify seed-borne mycoflora in vitro. Forty-four fungal species belonging to 20 genera were identified. Molecular data for these fungi were analyzed to construct a phylogenetic tree. Occurrence and biodiversity indicators were calculated. Two prevalent pathogens (average incidence > 40%) were Alternaria alternata and Cladosporium spp. Ustilago tritici was present in only seven of the 25 governorates, and less abundant than Tilletia tritici, the causal agent of stinking smut. Sinai governorate recorded the greatest species diversity, while the greatest species richness was in Qena and Sohag governorates. Canonical correspondence analysis of data for 20 fungal genera with temperature, relative humidity, precipitation, wind speed or solar radiation revealed that relative humidity was the most influential weather variable. It showed that occurrence and distribution of the 20 genera corresponded well with three out of four Egyptian climatic regions: Mediterranean, semi-arid, and arid. Knowing pathogen occurrence and distribution in Egypt is the first step to developing future disease management strategies to limit yield losses and improve food security. Despite this study being conducted on the wheat-growing areas in Egypt, our findings are useful for other wheat-growing countries that share the same climatic conditions. The correlation between a given fungus and the climatic variables can be useful in other ecosystems.

Grassland futures in Great Britain - Productivity assessment and scenarios for land use change opportunities.

To optimise trade-offs provided by future changes in grassland use intensity, spatially and temporally explicit estimates of respective grassland productivities are required at the systems level. Here, we benchmark the potential national availability of grassland biomass, identify optimal strategies for its management, and investigate the relative importance of intensification over reversion (prioritising productivity versus environmental ecosystem services). Process-conservative meta-models for different grasslands were used to calculate the baseline dry matter yields (DMY; 1961-1990) at 1km2 resolution for the whole UK. The effects of climate change, rising atmospheric [CO2] and technological progress on baseline DMYs were used to estimate future grassland productivities (up to 2050) for low and medium CO2 emission scenarios of UKCP09. UK benchmark productivities of 12.5, 8.7 and 2.8t/ha on temporary, permanent and rough-grazing grassland, respectively, accounted for productivity gains by 2010. By 2050, productivities under medium emission scenario are predicted to increase to 15.5 and 9.8t/ha on temporary and permanent grassland, respectively, but not on rough grassland. Based on surveyed grassland distributions for Great Britain in 2010 the annual availability of grassland biomass is likely to rise from 64 to 72milliontonnes by 2050. Assuming optimal N application could close existing productivity gaps of ca. 40% a range of management options could deliver additional 21∗106tonnes of biomass available for bioenergy. Scenarios of changes in grassland use intensity demonstrated considerable scope for maintaining or further increasing grassland production and sparing some grassland for the provision of environmental ecosystem services.

Combining R gene and quantitative resistance increases effectiveness of cultivar resistance against Leptosphaeria maculans in Brassica napus in different environments.

Using cultivar resistance against pathogens is one of the most economical and environmentally friendly methods for control of crop diseases. However, cultivar resistance can be easily rendered ineffective due to changes in pathogen populations or environments. To test the hypothesis that combining R gene-mediated resistance and quantitative resistance (QR) in one cultivar can provide more effective resistance than use of either type of resistance on its own, effectiveness of resistance in eight oilseed rape (Brassica napus) cultivars with different R genes and/or QR against Leptosphaeria maculans (phoma stem canker) was investigated in 13 different environments/sites over three growing seasons (2010/2011, 2011/2012 and 2012/2013). Cultivar Drakkar with no R genes and no QR was used as susceptible control and for sampling L. maculans populations. Isolates of L. maculans were obtained from the 13 sites in 2010/2011 to assess frequencies of avirulent alleles of different effector genes (AvrLm1, AvrLm4 or AvrLm7) corresponding to the resistance genes (Rlm1, Rlm4 or Rlm7) used in the field experiments. Results of field experiments showed that cultivars DK Cabernet (Rlm1 + QR) and Adriana (Rlm4 + QR) had significantly less severe phoma stem canker than cultivars Capitol (Rlm1) and Bilbao (Rlm4), respectively. Results of controlled environment experiments confirmed the presence of Rlm genes and/or QR in these four cultivars. Analysis of L. maculans populations from different sites showed that the mean frequencies of AvrLm1 (10%) and AvrLm4 (41%) were less than that of AvrLm7 (100%), suggesting that Rlm1 and Rlm4 gene-mediated resistances were partially rendered ineffective while Rlm7 resistance was still effective. Cultivar Excel (Rlm7 + QR) had less severe canker than cultivar Roxet (Rlm7), but the difference between them was not significant due to influence of the effective resistance gene Rlm7. For the two cultivars with only QR, Es-Astrid (QR) had less severe stem canker than NK Grandia (QR). Analysis of the relationship between severity of stem canker and weather data among the 13 sites in the three growing seasons showed that increased severity of stem canker was associated with increased rainfall during the phoma leaf spot development stage and increased temperature during the stem canker development stage. Further analysis of cultivar response to environmental factors showed that cultivars with both an Rlm gene and QR (e.g. DK Cabernet, Adriana and Excel) were less sensitive to a change in environment than cultivars with only Rlm genes (e.g. Capitol, Bilbao) or only QR (e.g. DK Grandia). These results suggest that combining R gene and QR can provide effective, stable control of phoma stem canker in different environments.

Modelling impacts of climate change on arable crop diseases: progress, challenges and applications.

Combining climate change, crop growth and crop disease models to predict impacts of climate change on crop diseases can guide planning of climate change adaptation strategies to ensure future food security. This review summarises recent developments in modelling climate change impacts on crop diseases, emphasises some major challenges and highlights recent trends. The use of multi-model ensembles in climate change modelling and crop modelling is contributing towards measures of uncertainty in climate change impact projections but other aspects of uncertainty remain largely unexplored. Impact assessments are still concentrated on few crops and few diseases but are beginning to investigate arable crop disease dynamics at the landscape level.

Management of genetically modified herbicide-tolerant sugar beet for spring and autumn environmental benefit.

When used in genetically modified herbicide-tolerant (GMHT) crops, glyphosate provides great flexibility to manipulate weed populations with consequences for invertebrates and higher trophic levels, for example birds. A range of timings of band and overall spray treatments of glyphosate to GMHT sugar beet were compared with a conventional weed control programme in four field trials over 2 years. Single overall sprays applied between 200 and 250 accumulated day degrees (above a base air temperature of 3 degrees C; degrees Cd) and band applied treatments applied at 10% or 20% ground cover within the crop rows generally gave significantly greater weed biomass and seed rain than conventional treatments, while later band sprays (more than 650 degrees Cd) reduced seed return. Two overall sprays of glyphosate produced low weed biomass and generally lowest seed return of all treatments but tended to give some of the highest yields. However, the early overall sprays (200-250 degrees Cd) and band sprays gave as good or better yields than the conventional and were generally equivalent to the two overall-spray programme. Viable seeds in the soil after the experiment were generally higher following the early overall (200-250 degrees Cd) and the band spray treatments than following the conventional. The results show that altered management of GMHT sugar beet can provide alternative scenarios to those of the recent Farm Scale Evaluation trials. Without yield loss they can enhance weed seed banks and autumn bird food availability compared with conventional management, or provide early season benefits to invertebrates and nesting birds, depending on the system chosen. Conventional weed control does not have the flexibility to enable these scenarios that benefit both agriculture and environment, although there may be some options for increasing weed seed return in autumn.

A novel approach to the use of genetically modified herbicide tolerant crops for environmental benefit.

The proposed introduction of genetically modified herbicide tolerant (GMHT) crops, with claims of improved weed control, has prompted fears about possible environmental impacts of their widespread adoption, particularly on arable weeds, insects and associated farmland birds. In response to this, we have developed a novel weed-management system for GMHT sugar beet, based on band spraying, which exploits the flexibility offered by the broad-spectrum partner herbicides. Here, we show the results from two series of field experiments which, taken together, demonstrate that, by using this system, crops can be managed for enhanced weed and insect biomass without compromising yield, thus potentially offering food and shelter to farmland birds and other wildlife. These results could be applicable widely to other row crops, and indicate that creative use of GMHT technology could be a powerful tool for developing more sustainable farming systems in the future.

Decision making in controlling virus yellows of sugar beet in the UK.

Virus yellows is an important disease affecting yield in sugar beet in the UK. Myzus persicae (Sulzer) is the most effective and efficient aphid vector of the three viruses causing the disease: beet yellows virus, beet mild yellowing virus and beet chlorosis virus. Control of virus yellows disease is thus focused on the study and control of this aphid species. UK national surveys of virus yellows began in 1946 and these data helped to formulate disease forecasting schemes to optimise control. Over the years, in addition to improvements in farm hygiene, periodic changes and developments in control of the disease have occurred. To accommodate these important developments, virus yellows forecasting schemes have evolved accordingly. The most recent version has been adapted to take account of the current widespread use of imidacloprid seed treatment. Its application offers potential to optimise the rational use of aphicides such as imidacloprid so as to benefit beet growers and the environment by reducing prophylactic use of seed treatment.

Assessing quantitative resistance against Leptosphaeria maculans (phoma stem canker) in Brassica napus (oilseed rape) in young plants.

Quantitative resistance against Leptosphaeria maculans in Brassica napus is difficult to assess in young plants due to the long period of symptomless growth of the pathogen from the appearance of leaf lesions to the appearance of canker symptoms on the stem. By using doubled haploid (DH) lines A30 (susceptible) and C119 (with quantitative resistance), quantitative resistance against L. maculans was assessed in young plants in controlled environments at two stages: stage 1, growth of the pathogen along leaf veins/petioles towards the stem by leaf lamina inoculation; stage 2, growth in stem tissues to produce stem canker symptoms by leaf petiole inoculation. Two types of inoculum (ascospores; conidia) and three assessment methods (extent of visible necrosis; symptomless pathogen growth visualised using the GFP reporter gene; amount of pathogen DNA quantified by PCR) were used. In stage 1 assessments, significant differences were observed between lines A30 and C119 in area of leaf lesions, distance grown along veins/petioles assessed by visible necrosis or by viewing GFP and amount of L. maculans DNA in leaf petioles. In stage 2 assessments, significant differences were observed between lines A30 and C119 in severity of stem canker and amount of L. maculans DNA in stem tissues. GFP-labelled L. maculans spread more quickly from the stem cortex to the stem pith in A30 than in C119. Stem canker symptoms were produced more rapidly by using ascospore inoculum than by using conidial inoculum. These results suggest that quantitative resistance against L. maculans in B. napus can be assessed in young plants in controlled conditions. Development of methods to phenotype quantitative resistance against plant pathogens in young plants in controlled environments will help identification of stable quantitative resistance for control of crop diseases.

Possible changes to arable crop yields by 2050.

By 2050, the world population is likely to be 9.1 billion, the CO(2) concentration 550 ppm, the ozone concentration 60 ppb and the climate warmer by ca 2 degrees C. In these conditions, what contribution can increased crop yield make to feeding the world? CO(2) enrichment is likely to increase yields of most crops by approximately 13 per cent but leave yields of C4 crops unchanged. It will tend to reduce water consumption by all crops, but this effect will be approximately cancelled out by the effect of the increased temperature on evaporation rates. In many places increased temperature will provide opportunities to manipulate agronomy to improve crop performance. Ozone concentration increases will decrease yields by 5 per cent or more. Plant breeders will probably be able to increase yields considerably in the CO(2)-enriched environment of the future, and most weeds and airborne pests and diseases should remain controllable, so long as policy changes do not remove too many types of crop-protection chemicals. However, soil-borne pathogens are likely to be an increasing problem when warmer weather will increase their multiplication rates; control is likely to need a transgenic approach to breeding for resistance. There is a large gap between achievable yields and those delivered by farmers, even in the most efficient agricultural systems. A gap is inevitable, but there are large differences between farmers, even between those who have used the same resources. If this gap is closed and accompanied by improvements in potential yields then there is a good prospect that crop production will increase by approximately 50 per cent or more by 2050 without extra land. However, the demands for land to produce bio-energy have not been factored into these calculations.