RESUMEN
This study systematically investigated the influence of effluent particles and activated sludge (AS) particles on the removal of micropollutants via wastewater effluent ozonation within typical effluent total suspended solids (TSS) concentrations. A series of batch experiments revealed that particle concentrations up to 30 mg/L had a minor impact on the removal of organic micropollutants (OMPs) in the aqueous phase. Moreover, the reduction of UV absorbance at 254 nm (UVA254) was negatively correlated to the level of particle concentration at ozone doses higher than 0.5 gO3/gDOC. It indicates that UVA254 abatement was more sensitive to the presence of particles compared to OMP removal. Organic micropollutants (OMPs) sorbed on effluent particles and sludge particles were extracted before and after ozonation. OMP sorption in effluent particles was 2-5 times higher than that in sludge particles. During the ozonation of raw secondary effluent, particle-bound micropollutants were removed comparably to the micropollutants in the aqueous phase. This suggests that the boundary layer surrounding the particle didn't affect the removal of OMPs in the particle phase. Furthermore, the removal of existing OMPs (irbesartan, sulfamethoxazole, and metoprolol) in the effluent was used to assess the ozone and â¢OH exposure. In water samples with and without particles, the elimination of OMPs could be reliably predicted (R² > 0.95) by calculated ozone and â¢OH exposures.
Asunto(s)
Ozono , Contaminantes Químicos del Agua , Purificación del Agua , Aguas Residuales , Eliminación de Residuos Líquidos , Aguas del Alcantarillado , Contaminantes Químicos del Agua/análisis , AguaRESUMEN
Drip irrigation is a water-saving technology. To date, little is known about how biofilm forms in drippers of irrigation systems. In this study, the internal dripper geometry was recreated in 3-D printed microfluidic devices (MFDs). To mimic the temperature conditions in (semi-) arid areas, experiments were conducted in a temperature controlled box between 20 and 50°C. MFDs were either fed with two different treated wastewater (TWW) or synthetic wastewater. Biofilm formation was monitored non-invasively and in situ by optical coherence tomography (OCT). 3-D OCT datasets reveal the major fouling position and illustrate that biofilm development was influenced by fluid dynamics. Biofilm volumetric coverage of the labyrinth up to 60% did not reduce the discharge rate, whereas a further increase to 80% reduced the discharge rate by 50%. Moreover, the biofilm formation rate was significantly inhibited in daily temperature cycle independent of the cultivation medium used.
Asunto(s)
Riego Agrícola/instrumentación , Biopelículas/crecimiento & desarrollo , Dispositivos Laboratorio en un Chip/microbiología , Modelos Teóricos , Temperatura , Calidad del Agua , Incrustaciones Biológicas/prevención & control , Clima Desértico , Tomografía de Coherencia Óptica , Aguas Residuales/química , Aguas Residuales/microbiología , Movimientos del Agua , Purificación del Agua/métodos , Abastecimiento de Agua/métodos , Abastecimiento de Agua/normasRESUMEN
Following sewer overflows, fecal indicator bacteria enter surface waters and may experience different lysis or growth processes. A 1D mathematical model was developed to predict total suspended solids (TSS) and Escherichia coli concentrations based on field measurements in a large-scale flume system simulating a combined sewer overflow. The removal mechanisms of natural inactivation, UV inactivation, and sedimentation were modelled. For the sedimentation process, one, two or three particle size classes were incorporated separately into the model. Moreover, the UV sensitivity coefficient α and natural inactivation coefficient kd were both formulated as functions of TSS concentration. It was observed that the E. coli removal was predicted more accurately by incorporating two particle size classes. However, addition of a third particle size class only improved the model slightly. When α and kd were allowed to vary with the TSS concentration, the model was able to predict E. coli fate and transport at different TSS concentrations accurately and flexibly. A sensitivity analysis revealed that the mechanisms of UV and natural inactivation were more influential at low TSS concentrations, whereas the sedimentation process became more important at elevated TSS concentrations.
Asunto(s)
Escherichia coli/fisiología , Ríos/microbiología , Microbiología del Agua , Purificación del Agua , Heces/microbiología , Modelos Biológicos , Modelos Químicos , Ríos/químicaRESUMEN
This work investigates the validation and application of a competitive model approach for full-scale wastewater treatment plants (WWTP) with external recirculation of partially loaded powdered activated carbon (PAC) for removal of organic micropollutants (OMP). It is based on the ideal adsorbed solution theory (IAST) for multisolute mixtures combined with calibration of fictive organic components and correction of single-solute model parameters for OMP by use of the tracer model (TRM). Adsorption kinetics are represented by a pseudo first order reaction (PFO) and compared to mass transfer calculated with the homogenous surface diffusion model (HSDM). Model validation with operational data from two different WWTPs showed a strong dependency of model results on the batch sample quality used for model calibration. In contrast, the kinetic approach is of less importance for predicting full-scale OMP removal with long PAC sludge retention times. Further model application demonstrated that external PAC recirculation significantly improves the OMP removal with regard to both adsorption capacity and compensation of competitive effects of Dissolved Organic Carbon (DOC).
Asunto(s)
Carbón Orgánico , Eliminación de Residuos Líquidos , Aguas Residuales , Contaminantes Químicos del Agua , Adsorción , Contaminantes Químicos del Agua/química , Eliminación de Residuos Líquidos/métodos , Carbón Orgánico/química , Aguas Residuales/química , Purificación del Agua/métodos , Cinética , Modelos Teóricos , Carbono/químicaRESUMEN
This work presents a mathematical method to describe adsorptive removal of organic micropollutants (OMPs) and dissolved organic carbon (DOC) from wastewater treatment plant effluent using powdered activated carbon (PAC). The developed model is based on the tracer model (TRM) as a modification of the ideal adsorbed solution theory (IAST) and uses the fictive component approach for organic matter fractionation. It enables the simulation of multisolute adsorption of OMPs considering competitive adsorption behavior of organic background compounds (OBC). Adsorption equilibrium data for DOC and seven different OMPs as well as kinetic data for DOC were derived from batch experiments performed with secondary clarifier effluent of two municipal wastewater treatment plants (WWTP 1 and WWTP 2). Two conventional PAC products were investigated as well as one biogenic PAC (BioPAC). Verification and validation of the fitting results based on operational data of WWTP 1 showed promising prediction of DOC and OMP removal efficiency. However, when applied to a static simulation of a full-scale PAC adsorption stage, the model overpredicts the removal efficiency of sulfamethoxazole and candesartan. For benzotriazole, carbamazepine or hydrochlorothiazide, predicted removal falls below operational removal. The model can be used to predict removals of good adsorbable OMPs but fails to accurately predict the removals of OMPs with variable or low PAC affinity. The model was further used for a dynamic simulation of DOC and diclofenac effluent concentrations of a full-scale PAC adsorption stage with varying operating conditions and influent concentrations. Results show that the hydraulic retention time (HRT) in the contact reactor is a decisive operational parameter for OMP removal efficiency besides the PAC dose.