RESUMEN
AIMS: To investigate the clinical and radiographic outcomes of a chemically modified sandblasted large-grit acid-etched implant (hydrophilic) in lateral sinus floor elevation (LSFE), compared with a conventional one (hydrophobic). MATERIALS AND METHODS: A retrospective study design was adopted. Patients who received LSFE with simultaneous implant placement were recruited. According to different types of implant surfaces, patients were divided into two groups (the hydrophilic group and the hydrophobic group). Implant survival rate (SR), endo-sinus bone stability on the radiographs, mean probing depths, percentage of bleeding on probing, marginal bone loss, and patient satisfaction were evaluated. RESULTS: A total of 106 patients with 180 implants (hydrophilic:101, hydrophobic:79) in 119 maxillary sinuses were included. The follow-up period ranged from 2 to 5 years. Three hydrophobic implants and one hydrophilic implant in four different patients failed. The SR of the hydrophilic group was higher than that of the hydrophobic group but without a significant difference (p > .05). The change and change rate of endo-sinus bone height (ΔESBH and RΔESBH) and bone volume (ΔESBV and RΔESBV) in the hydrophilic group were less than those in the hydrophobic group, with a significant difference at 6 months after implantation. No other significant difference was found between the two groups. CONCLUSION: Within the limitations of this study, both hydrophilic and hydrophobic implants were suitable for LSFE with predictable clinical outcomes. Meanwhile, hydrophilic implants could contribute to the grafted endo-sinus bone stability during healing time.
Asunto(s)
Implantes Dentales , Elevación del Piso del Seno Maxilar , Humanos , Estudios Retrospectivos , Masculino , Femenino , Elevación del Piso del Seno Maxilar/métodos , Persona de Mediana Edad , Resultado del Tratamiento , Implantación Dental Endoósea/métodos , Anciano , Adulto , Propiedades de Superficie , Interacciones Hidrofóbicas e Hidrofílicas , Diseño de Prótesis DentalRESUMEN
OBJECTIVE: Peri-implantitis is one of the most common complications of implants. However, its pathogenesis has not been clarified. In recent years, mouse models are gradually being used in the study of peri-implantitis. This review aims to summarize the methods used to induce peri-implantitis in mice and their current applications. METHOD: Articles of peri-implantitis mouse models were collected. We analyzed the various methods of inducing peri-implantitis and their application in different areas. RESULTS: Most researchers have induced peri-implantitis by silk ligatures. Some others have induced peri-implantitis by Pg gavage and LPS injection. Current applications of peri-implantitis mouse models are in the following areas: investigation of pathogenesis and exploration of new interventions, comparison of peri-implantitis with periodontitis, the interaction between systemic diseases and peri-implantitis, etc. CONCLUSION: Silk ligature for 2-4 weeks, Pg gavage for 6 weeks, and LPS injection for 6 weeks all successfully induced peri-implantitis in mice. Mice have the advantages of mature gene editing technology, low cost, and short time to induce peri-implantitis. It has applications in the study of pathogenesis, non-surgical treatments, and interactions with other diseases. However, compared with large animals, mice also have a number of disadvantages that limit their application.
RESUMEN
Herein, we demonstrated a strategy to regulate the conductive metal-organic framework (MOF) surface, by the conjugated molecule wires for selective and sensitive determination of dopamine (DA) in the live brain. The MOFs were decorated at the carbon fiber electrode deposited by Au nanoleaves as the upper electric transducer to provide rich electrocatalytic sites for electron transfer of neurochemicals at the electrode surface, leading to greatly enhanced sensitivity for detection of neurochemicals. On the other hand, the conjugated molecular wire, 4-(thiophen-3-ylethynyl)-benzaldehyde (RP1), was synthesized and assembled as an underlying bridge to regulate the electrochemical processes at the MOF-based electrode, specifically decreasing the reaction Gibbs free energy of DA oxidation, thus selectively promoting the heterogeneous electron transfer of DA from the MOF layer to the electrode surface. Owing to the electrocatalytic activity for DA oxidation, the present microsensor exhibited high selectivity for real-time tracking of DA in a good linear relationship in the range of 0.004-0.4 µM with a detection limit of 1 nM. Eventually, this functionalized electrode was successfully applied for in vivo monitoring of DA in mouse brains with Parkinson's disease (PD) model. The results indicated that the levels of DA were obviously decreased in both acute and subacute PD models. Moreover, the level of DA strongly depended on the amount of uric acid (UA), a physiological antioxidant, which rose as the UA amount was lower than 200 mg kg-1 but was downregulated again after treatment by a higher amount of UA.
Asunto(s)
Dopamina , Estructuras Metalorgánicas , Animales , Ratones , Dopamina/química , Microelectrodos , Ácido Ascórbico/química , Electrodos , Oxidación-Reducción , Ácido Úrico , Técnicas Electroquímicas/métodosRESUMEN
In order to reduce the use of fungicide and ensure food safety, it is necessary to develop fungicide with low toxicity and high efficiency to reduce residues. Azoxystrobin (AZOX), which is derived from mushrooms, is an excellent choice. However, conventional AZOX release is difficult to regulate. In this paper, a pH-responsive fungicide delivery system for the preparation of AZOX by impregnation method was reported. The Zinc metal-organic framework/Biomass charcoal (ZIF-8/BC) support was first prepared, and subsequently, the AZOX-ZIF-8/BC nano fungicide was prepared by adsorption of AZOX onto ZIF-8/BC by dipping. Gray mold, caused by Botrytis cinerea, is one of the most important crop diseases worldwide. AZOX-ZIF-8/BC could respond to oxalic acid produced by Botrytis cinerea to release loaded AZOX. When pH = 4.8, it was 48.42% faster than when pH = 8.2. The loading of AZOX on ZIF-8/BC was 19.83%. In vitro and pot experiments showed that AZOX-ZIF-8/BC had significant fungicidal activity, and 300 mg/L concentration of AZOX-ZIF-8-BC could be considered as a safe and effective control of Botrytis cinerea. The above results indicated that the prepared AZOX-ZIF-8/BC not only exhibited good drug efficacy but also demonstrated pH-responsive fungicide release.
Asunto(s)
Fungicidas Industriales , Estructuras Metalorgánicas , Solanum lycopersicum , Fungicidas Industriales/farmacología , Carbón Orgánico/farmacología , Estructuras Metalorgánicas/farmacología , Zinc/farmacología , Biomasa , Enfermedades de las Plantas/prevención & control , BotrytisRESUMEN
STATEMENT OF PROBLEM: The outcome of implant-supported fixed complete dentures in edentulous patients with a history of periodontitis is unclear. PURPOSE: The purpose of this retrospective clinical study was to assess the clinical outcomes of immediate loaded fixed complete dentures in individuals with a history of periodontitis and to analyze risk factors related to implant failure. MATERIAL AND METHODS: A total of 642 implants (146 prostheses) in 119 patients were included. The follow-up period ranged from 2 to 7 years. Implant survival rates, marginal bone loss, mechanical complications, biologic complications, and patient satisfaction were evaluated. The Pearson chi-square test, independent samples t test, and multivariate generalized estimating equation were performed for statistical analysis (α=.05). RESULTS: Eleven implants in 9 patients failed, leading to overall survival rates of 98.3% at the implant level and 92.4% at the patient level. The mean ±standard deviation marginal bone loss was 0.62 ±0.86 mm, and marginal bone loss did not differ significantly between axial and tilted implants (P>.05). Mechanical complications were detected in 55 (37.7%) definitive prostheses; biologic complications were detected in 318 (49.5%) implants. Smokers had a significantly lower survival rate than nonsmokers (odds ratio: 6.880, P=.013). Bruxers had a significantly higher incidence of mechanical complications than nonbruxers (P<.001). CONCLUSIONS: The immediate loaded fixed complete denture supported by implants is a suitable treatment option for edentulous patients with a history of periodontitis, with high survival implant rates. Smoking is a risk factor for implant failure. Bruxism may increase the incidence of mechanical complications with implant-supported fixed complete dentures, and the overall biologic complication incidence is comparatively high.
Asunto(s)
Pérdida de Hueso Alveolar , Productos Biológicos , Implantes Dentales , Carga Inmediata del Implante Dental , Periodontitis , Humanos , Implantes Dentales/efectos adversos , Estudios Retrospectivos , Pérdida de Hueso Alveolar/etiología , Periodontitis/inducido químicamente , Periodontitis/complicaciones , Dentadura Completa Inmediata , Prótesis Dental de Soporte Implantado/efectos adversos , Estudios de Seguimiento , Resultado del Tratamiento , Fracaso de la Restauración DentalRESUMEN
The lack of reliable approaches for real-time measurement and quantification of polysulfides (H2Sn) in vivo greatly limits the exploration of their potential roles in brain functions. Herein, an electrochemical probe, 4-(5-(1,2-dithiolan-3-yl)pentanamido)-1,2-phenylene bis(2-fluoro-5-nitrobenzoate) (FP2), was rationally designed and created for determination of H2Sn. The bis-electrophilic groups of FP2 could specifically recognize two -SH groups in H2Sn and trigger the generation of an electroactive pyrocatechol moiety, resulting in a well-defined faradic current signal at â¼0.24 V (vs Ag/AgCl). Meanwhile, bidentate thiols were designed as anchoring sites to greatly improve the assembled stability of FP2 at the Au surface, which efficiently defended the interference of glutathione (GSH) with a current decrease of less than 5.2% even after long-term measurements in 5 mM GSH for 3 h. In addition, a stable inner reference molecule with dithiols, α-lipoic acid ferrocenylamide (FcBT), was synthesized to construct a ratiometric electrochemical strategy for in vivo determination of H2Sn through one-step coassembling with FP2 via double S-Au bonds. The present ratiometric strategy demonstrated high selectivity for real-time tracking of H2Sn in a linear range of 0.25-20 µM. Eventually, the developed microelectrode with high selectivity, accuracy, and stability was employed for in vivo assaying of H2Sn in mouse brains with ischemia.
Asunto(s)
Colorantes Fluorescentes , Compuestos de Sulfhidrilo , Animales , Colorantes Fluorescentes/química , Glutatión , Ratones , SulfurosRESUMEN
Plant essential oils and their components have broad application prospects as substitutes for chemical pesticides. However, the burst release and persistence time need to be optimized. In this study, 1,8-cineole (1,8-CIN) was embedded in degradable cellulose acetate (CA) by electrospinning to achieve sustained release. The results showed that the sustained-release membrane had good morphology and thermal stability. The release test showed that the deficiency of the explosive release of 1,8-CIN improved after encapsulation, and 21.74 % of the drug remained after 42 days. In the application test, the fiber membrane could kill the test insects in a short period of time and affect the behavior choices of the test insects. It affected the growth and oviposition of the test insects and reduced adult longevity by 13.64 % and oviposition by 23.35 %. This study can improve the utilization rate of pesticides, alleviate environmental pressure, and provide new ideas for pest control.
RESUMEN
PURPOSE: To evaluate the in vitro cleaning effects of different decontamination methods and their impacts on surface characteristics using clinically failed TiUnite implants (Nobel Biocare, Kloten, Switzerland). MATERIALS AND METHODS: Thirty clinically failed TiUnite implants were treated using different decontamination methods. Group 1 (control group) received physiological saline irrigation; Group 2 underwent erythritol powder air polishing (AIRFLOW Master Piezon, EMS Dental, Nyon, Switzerland); Group 3 was treated with erythritol powder air polishing with ethylenediaminetetraacetic acid brushing (FileRite PRC, Pulpdent, Watertown, MA, USA); Group 4 received ultrasonic scaling with polyetheretherketone tips (EMS Dental); Group 5 underwent ultrasonic scaling with polyetheretherketone tips with ethylenediaminetetraacetic acid; and Group 6 was treated with a combination of ultrasonic scaling with polyetheretherketone tips, erythritol powder air polishing and ethylenediaminetetraacetic acid. Surface cleaning effects, quantified by relative contaminated area reduction and visual analogue scale score, as well as surface roughness and chemistry, were assessed after decontamination. The cleaning effects of each decontamination method were also compared between TiUnite and SLA (sandblasted, large-grit acid-etched; Straumann, Basel, Switzerland) implants. RESULTS: Group 6 showed the highest relative contaminated area reduction (stereoscopic microscopy 83.92%, scanning electron microscopy 96.40%), visual analogue scale score (2.83) and reduction in surface roughness (thread bottom -0.78 µm, tip -1.35 µm), as well as an almost maximal decrease in the proportion of carbon (thread bottom -12.33%, tip -8.77%) and increase in that of titanium (thread bottom 13.71%, tip 10.73%). Polyetheretherketone remnants were observed in Groups 4 and 5 but appeared to be reduced in Group 6. When comparing the outcomes with those for SLA implants, no significant differences were found. CONCLUSION: Within the limitations of the present study, the combination of ultrasonic scaling with polyetheretherketone tips, erythritol powder air polishing and ethylenediaminetetraacetic brushing achieved reasonable cleaning effects. The original surface modification did not seem to have any impact on the decontamination results for any of the methods examined.
Asunto(s)
Implantes Dentales , Ácido Edético/química , Eritritol/química , Descontaminación , Proyectos Piloto , Polvos , Propiedades de SuperficieRESUMEN
We have prepared a new type of Aloin/Polyvinylpyrrolidone (PVP)-Aloin/PVP/polylactic acid (PLA)-PLA sandwich nanofiber membrane (APP), to achieve a time-regulated biphasic drug release behavior, used for hemostasis, antibacterial activity and accelerated wound healing. We tested the water absorption capacity, water contact angle, tensile strength, thermogravimetric analysis, Fourier transform infrared spectroscopy and in vitro drug release of the prepared material, as well as analyzed the morphology of the nanofiber membrane with a scanning electron microscope. In the wound healing experiment, the wound healing rate of APP on the 15th day was 96.67%, and it demonstrated excellent antibacterial activity by the disc diffusion method, showing superior antibacterial activity against Gram-negative bacteria. The skin defect model on the back of mice showed that APP nanofibers significantly induced granulation tissue growth, collagen deposition and epithelial tissue remodeling. Current research shows that the prepared composite nanofibers can quickly stop bleeding and can effectively promote wound healing.
RESUMEN
BACKGROUND: Clinical efficacy of antimicrobial photodynamic therapy (aPDT) as compared to antibiotics in periodontitis and peri-implantitis has been tested in several clinical trials. Yet controversial results were reported. The aim of the present study was to answer the question: "Will adjunctive antimicrobial photodynamic therapy be more effective than antibiotics agent in the treatment of periodontitis and peri-implantitis?". METHODS: Publications compared outcomes between aPDT and antibiotics in adult patients with periodontitis or peri-implantitis, containing more than 3-month follow-up duration, were involved in the systematic review and meta-analysis. PubMed, EMBASE and Cochrane Central were searched until December of 2020. Clinical parameters including pocket probing depth (PPD), clinical attachment level (CAL), and bleeding on probing (BOP) were evaluated. The risk of bias was assessed by Cochrane Collaboration Tool. Weighted mean differences (WMD), 95 % confidence interval(CI) and heterogeneity were estimated by Review Manager software. RESULTS: 10 trials in periodontitis and 5 trials in peri-implantitis were included. Meta-analysis outcomes revealed equal clinical evidence for aPDT and antibiotics in periodontitis and peri-implantitis. In addition, aPDT significantly reduced the red complex in both diseases. However, owing to the heterogeneity of protocols in articles and the limited number of studies, the comparative conclusion remained unconfirmed. CONCLUSION: aPDT can be considered as an alternative to antibiotics in the treatment of peri-implantitis and periodontitis. Given that high heterogeneity in outcome was found in this review, future long-term clinical trials with standard aPDT and antibiotic treatment should be tested to arrive at a firm conclusion.