RESUMEN
Recognizing the pervasive presence of alumina minerals and low-molecular-weight organic acids (LMWOAs) in the environment, this study addressed the gap in the interaction mechanisms within the ternary system involving these two components and Fe(II). Specifically, the impacts of LMWOAs on hydroxyl radicals (â¢OH) production and iron species transformation during Fe(II) oxidation on γ-Al2O3 mineral surface were examined. Results demonstrated that adding 0.5 mM oxalate (OA) or citrate (CA) to the γ-Al2O3/Fe(II) system (28.1 µM) significantly enhanced â¢OH production by 1.9-fold (51.9 µM) and 1.3-fold (36.2 µM), respectively, whereas succinate (SA) exhibited limited effect (30.7 µM). Raising OA concentration to 5 mM further promoted â¢OH yield to 125.0 µM after 24 h. Deeper analysis revealed that CA facilitated the dissolution of adsorbed Fe(II) and its subsequent oxygenation by O2 through both one- and two-electron transfer mechanisms, whereas OA enhanced the adsorption of dissolved Fe(II) and more efficient two-electron transfer for H2O2 production. Additionally, LMWOAs presence favored the formation of iron minerals with poor crystallinity like ferrihydrite and lepidocrocite rather than well-crystallized forms such as goethite. The distinct impacts of various LMWOAs on Fe(II) oxidation and â¢OH generation underscore their unique roles in the redox processes at mineral surface, consequently modulating the environmental fate of prototypical pollutants like phenol.
Asunto(s)
Óxido de Aluminio , Radical Hidroxilo , Oxidación-Reducción , Radical Hidroxilo/química , Óxido de Aluminio/química , Minerales/química , Hierro/química , Adsorción , Ácido Cítrico/químicaRESUMEN
Honokiol (HK) and magnolol (MAG) are typical representatives of neolignans possessing a wide range of biological activities and are employed as traditional medicines in Asia. In the past few decades, HK and MAG have been proven to be promising chemical scaffolds for the development of novel neolignan drugs. This review focuses on recent advances in the medicinal chemistry of HK and MAG derivatives, especially their structure-activity relationships. In addition, it also presents a comprehensive summary of the pharmacology, biosynthetic pathways, and metabolic characteristics of HK and MAG. This review can provide pharmaceutical chemists deeper insights into medicinal research on HK and MAG, and a reference for the rational design of HK and MAG derivatives.
Asunto(s)
Compuestos de Bifenilo , Lignanos , Lignanos/química , Lignanos/farmacología , Compuestos de Bifenilo/antagonistas & inhibidores , Compuestos de Bifenilo/farmacología , Compuestos de Bifenilo/química , Relación Estructura-Actividad , Humanos , Estructura Molecular , Compuestos Alílicos , FenolesRESUMEN
PURPOSE: In spinal tuberculosis surgery, topical administration of drugs to the lesion is a preventive treatment measure. The aim is to achieve better bacterial inhibition and to prevent complications. As one of the most common complications after spinal tuberculosis surgery, many factors can lead to surgical site infection (SSI). No definitive reports of local streptomycin irrigation of the lesion and SSI of spinal tuberculosis have been seen. This study analyzed data related to surgical site infections (SSI) after the treatment of spinal tuberculosis using this regimen. METHODS: In this study, 31 were in the observation group (streptomycin flush) and 34 in the control group (no streptomycin flush). All patients received the same standard of perioperative care procedures. General information, operative time, intraoperative bleeding, ESR and CRP at one week postoperatively, time on antibiotics, total drainage, days in hospital, incision infection rate and secondary debridement rate were compared between the two groups. RESULTS: Patients in both groups completed the surgery successfully. The ESR and CRP levels in the observation group were lower than those in the control group one week after surgery (p < 0.05); the duration of postoperative antibiotics and hospital stay were lower than those in the control group (p < 0.05); the incidence of SSI in the two groups was 5.88% and 6.45% respectively, with no significant difference (p > 0.05). CONCLUSION: The use of topical streptomycin irrigation of the lesion during surgical procedures for spinal tuberculosis had no significant effect on the incidence of SSI, however, it helped to control the level of infection in the postoperative period and reduced the length of time patients had to use postoperative antibiotics and the number of days they stayed in hospital. Future prospective randomised controlled trials in more centres and larger samples are recommended.
Asunto(s)
Tuberculosis de la Columna Vertebral , Humanos , Tuberculosis de la Columna Vertebral/cirugía , Tuberculosis de la Columna Vertebral/tratamiento farmacológico , Estudios Retrospectivos , Estreptomicina/uso terapéutico , Antibacterianos , Infección de la Herida Quirúrgica/etiología , Infección de la Herida Quirúrgica/prevención & control , Periodo PosoperatorioRESUMEN
Pyrogenic carbon (PC) including black carbons and engineered carbons can mediate the extracellular electron transfer to facilitate the biogeochemical reaction with organic pollutants. Yet, the role of carbon structures and iron minerals on PC-mediated microbial degradation is still lacking of understanding. Herein, we studied the electrochemical properties of PCs produced from varied feedstock with regards to the mediated degradation of p-nitrophenol (PNP) by Shewanella putrefaciens CN32 in anoxic system. Mediated degradation by PCs was enhanced by facilitating extracellular electron transfer through oxygenated group and graphitic structure. Graphitic crystallites improved the electron-accepting capacity (as suggested by ID/IG and EAC) and diminished the electrochemical impedance (as suggested by Rct), contributing to PNP degradation under the anoxic system. Furthermore, more interfacial adsorption was conducive to the mediated reduction by the graphitic structure on PCs of high-temperature. In the presence of iron minerals, both hematite and goethite significantly facilitated PC-mediated degradation, which could be ascribed to the enhancement of the electron-donating capacity of microorganism and the accumulation of the reductive-state PCs by the interaction with generated Fe(II). This work paves a feasible way to the technical design on the remediation of phenolic contaminants by PC-mediated microbial degradation in environment.
Asunto(s)
Carbono , Hierro , Hierro/química , Oxidación-Reducción , Minerales/metabolismo , Compuestos Férricos/químicaRESUMEN
The migration and conversion of arsenic in the environment usually accompany by the redox of iron-bearing minerals. For instance, the oxidation of pyrite can generate reactive oxygen species (ROS) affecting the species of arsenic, but the types and roles of ROS have been unclear. This paper demonstrated the vital role of Fe(II) in the pyrite for the formation of ROS. Results showed that exogenous addition of Fe(II) significantly enhanced the removal rate of As(III) by pyrite. 2,2'-bipyridine (BPY) decreased the oxidation of As(III) by complexing with Fe2+ in solution, whilst EDTA enhanced the oxidation of As(III) by boosting the autoxidation of Fe2+. In addition, neutral pH is superior for the oxidation of As(III) and removal of total arsenic. Importantly, Methanol, SOD enzyme and PMOS inhibited 54%, 28% and 17.5% of As(III) oxidation, respectively, which indicated O2â¢- and â¢OH were the main contributors to As(III) oxidation, and Fe(IV) contributed a small part of As(III) oxidation. The content of As(V) in the FeS2-Fe2+-As(III) system was higher than that in the FeS2-As(III) system, further confirming the vital role of Fe(II) for As(III) oxidation. Lepidocrocite was produced in a single Fe2+ system, which was not detected in the FeS2-As(III) system. Thus, the presence of mineral surfaces changed the oxidation products of Fe2+ and accelerated the oxidation and immobilization of As(III). FA (Fulvic Acid) and HA (Humic Acid) accelerated the oxidation of As(III), but the oxidation of As(III) by pyrite was inhibited to a certain extent, with increasing phenolic hydroxyl groups in phenolic acid. Our findings provide new insight into the oxidative species in the pyrite-Fe(II) system and will help guide the remediation of arsenic pollution in complex environmental systems.
Asunto(s)
Arsénico , Especies Reactivas de Oxígeno , Arsénico/química , Ácido Edético , 2,2'-Dipiridil , Sustancias Húmicas , Metanol , Hierro/química , Sulfuros/química , Oxidación-Reducción , Compuestos Férricos/química , Oxígeno/química , Compuestos Ferrosos , Superóxido DismutasaRESUMEN
Frequent oil spill accidents and ever-increasing oily wastewater have become serious global environmental problems. To enhance the oil-sorption capacity and simplify the oil-recovery process, the construction of various advanced oil sorbents and oil-collecting devices is of great technological importance. Herein, a three-dimensional (3D) porous carbon-based hybrid monolith has been successfully fabricated, in which cobalt based metal-organic framework (Co-MOF) nanosheets are firstly immobilized on a carbon foam (CF) skeleton (denoted as Co-MOFs/CF) via a facile vapor-phase hydrothermal (VPH) technique followed by carbonation treatment under a N2 atmosphere into Co@C/CF. The resulting Co@C/CF hybrid monolith exhibits an exceptional oil/water separation ability, including high sorption capacity (from 85 to 200 times its own weight toward various solvents and oils), easy collection and remarkable recyclability, as reflected by no obvious reduction in uptake capacity even after 20 cycles of repeated operation. More significantly, the oil-collecting device based on the proposed carbon-based hybrid monolith can rapidly, efficiently, and continuously collect oil from water surfaces, making it a promising candidate for oil-spill remediation.
RESUMEN
Environmental concern associated with excess fluoride has intrigued the unceasing exploration of new multifunctional hybrid materials to mitigate any undesirable consequence to human health. Herein, a novel hybrid monolith has been successfully fabricated via a facile in-situ growth strategy for highly efficient defluoridation from contaminated waters, in which homogeneously dispersed UiO-66 particles are perfectly anchored on three dimensional (3D) porous carbon foam (CF). Benefiting from fully exposed active sites, excellent pore accessibility and efficient mass transport, the integrated UiO-66/CF hybrid monolith exhibits fast adsorption kinetics, and outstanding uptake capacity toward fluoride as high as 295â¯mgâ¯g-1, which greatly outperforms the previously reported adsorbents. Furthermore, the fluoride removal efficiency of the spent monolith can reach up to 70% after four cycles, accompanied by facile separation nature and outstanding water stability. More significantly, the resulting UiO-66/CF packed column (0.36â¯g) can continuously treat 400â¯mL of F- solution with 6.2â¯mg L-1 before the breakthrough point occurs, highlight its potential feasibility for fluoride removal in the practical applicability.
RESUMEN
In an effort to provide early warnings for the occurrence of eutrophication, it is highly desirable to develop an accurate and efficient technique to ensure continuous monitoring of dissolved reactive phosphorus (DRP) in the aquatic environment from the viewpoint of environmental management. Herein, a new diffusive gradient in thin film (DGT) technique was developed and evaluated for in situ measurement of DRP in waters, in which Zr-based metal organic frameworks (MOFs, UiO-66) were utilized as aqueous binding agent (abbreviated as UiO-66 DGT). As expected, the UiO-66 DGT demonstrated high uptake capacity towards phosphorus (20.8⯵gâ¯P cm-2). Meanwhile, an excellent linearity between the accumulated DRP mass and deployment time over 5â¯d (R2â¯=â¯0.996) was obtained regardless of high or low phosphate solution. In addition, effective diffusion coefficients (D) of DRP increased exponentially with increasing ionic strengths (R2â¯=â¯0.99). Based on the rectified D, the performance of the UiO-66 DGT was independent of solution pH (6.5-8.5) and ionic strengths (ranging from 0.01 to 100â¯mmolâ¯L-1). Furthermore, field deployments of the UiO-66 DGT were undertaken in a natural eutrophic lake (Lake Chaohu, China). It was noteworthy that DRP could be continually accumulated by the UiO-66 DGT for more than 14â¯d and good agreements were obtained between the concentrations measured by DGT (CDGT) and those by ex situ chemical extraction method in solution (Csol), as reflected by CDGT/Csol of 0.9-1.1. In situ determination of DRP speciation was also carried out at different sites across Lake Chaohu. Overall, this study contributed to a better constructing of liquid binding phase DGT for the measurement of DRP in waters, facilitating the widespread application of the UiO-66 DGT as a routine monitoring technique and for large-scale environmental analysis.
Asunto(s)
Estructuras Metalorgánicas , Fósforo , China , Difusión , Monitoreo del Ambiente , CirconioRESUMEN
Eutrophication of water bodies caused by the excessive phosphate discharge has constituted a serious threat on a global scale. It is imperative to exploit new advanced materials featuring abundant binding sites and high affinity to achieve highly efficient and specific capture of phosphate from polluted waters. Herein, water stable Zr-based metal organic frameworks (MOFs, UiO-66) with rational structural design and size modulation have been successfully synthesized based on a simple solvothermal method for effective phosphate remediation. Impressively, the size of the resulting UiO-66 particles can be effectively adjusted by simply altering reaction time and the amount of acetic acid with the purpose of understanding the crucial effect of structural design on the phosphate capture performance. Representatively, UiO-66 particles with small size demonstrates 415 mg/g of phosphate uptake capacity, outperforming most of the previously reported phosphate adsorbents. Meanwhile, the developed absorbents can rapidly reduce highly concentrated phosphate to below the permitted level in drinking water within a few minutes. More significantly, the current absorbents display remarkable phosphate sorption selectivity against the common interfering ions, which can be attributed to strong affinity between Zr-OH groups in UiO-66 and phosphate species. Furthermore, the spent UiO-66 particles can be readily regenerated and reused for multiple sorption-desorption cycles without obvious decrease in removal performance, rendering them promising sustainable materials. Hence, the developed UiO-66 adsorbents hold significant prospects for phosphate sequestration to mitigate the increasingly eutrophic problems.
RESUMEN
Natural organic matter (NOM) significantly affects the fate, bioavailability, and toxicity of arsenic in the environment. In the present study, we investigated the oxidation of As(III) in the presence of hydroquinone (HQ) and benzoquinone (BQ), which were selected as model quinone moieties for NOM. It was found that As(III) was oxidized to As(V) in the presence of HQ or BQ at neutral conditions, and the oxidation efficiency of As(III) increased from 33% to 92% in HQ solutions and from 0 to 80% in BQ solutions with pH increasing from 6.5 to 8.5. The oxidation mechanism was further explored with electron spin resonance (ESR) technique. The results showed that semiquinone radicals (SQ(-)) were generated from the comproportionation reaction between BQ and HQ, which mediated the formation of superoxide anion (O2(-)), hydrogen peroxide (H2O2) and hydroxyl radical (OH). Both the SQ(-), H2O2 and OH contributed to the oxidation of As(III). The increase of pH favored the formation of SQ(-), and thus promoted the generation of reactive oxygen species (ROS) as well as As(III) oxidation. Increasing concentrations of HQ and BQ from 0.1 to 1.0 mM enhanced As(III) oxidation from 65% to 94% and from 10% to 53%, respectively. The findings of this study facilitate our understanding of the fate and transformation of As(III) in organic-rich aquatic environments and highlight quinone moieties as the potential oxidants for As(III) in the remediation of arsenic contaminated sites.
Asunto(s)
Arsenitos/química , Benzoquinonas/química , Hidroquinonas/química , Especies Reactivas de Oxígeno/química , Espectroscopía de Resonancia por Spin del Electrón , Peróxido de Hidrógeno/química , Oxidantes/química , Oxidación-Reducción , Superóxidos/químicaRESUMEN
Recently, sulfate radical ( [Formula: see text] ) based-advanced oxidation technologies (AOTs) have been attracted great attention in the remediation of contaminated soil and groundwater. In the present study, Co(2+) ions activated peroxymonosulfate (PMS) system was used to degrade 1, 1, 1-trichloro-2, 2'bis(p-chlorophenyl) ethane (DDT) in aqueous solutions. It was found that DDT was efficiently degraded in the PMS/Co(II) solutions within several hours, and the degradation efficiency of DDT was dependent on the concentrations of PMS and Co(II), and the optimum molar ratio of PMS and Co(II) was 50:1. The degradation kinetics of DDT were well described with pseudo-first-order equations over a range of temperature (10-40 °C), and the activation energy that was calculated with Arrhenius equation was 72.3 ± 2.6 kJ/mol. Electron paramagnetic resonance (EPR) and GC-MS techniques were applied to identify the intermediates and reactive species for DDT degradation. The results indicated that [Formula: see text] and OH were the main reactive species accounting for DDT degradation. Dichlorobenzophenone, 4-chlorobenzoic acid and benzylalcohol were the dominant intermediates for DDT degradation, and the likely degradation pathway of DDT was proposed on the basis of these identified products. Increasing pH inhibited the formation of [Formula: see text] and OH, and thus decreased the catalytic degradation of DDT. Cl(-) ion was found to significantly inhibit, while [Formula: see text] and dissolved oxygen had limited effects on DDT degradation.
Asunto(s)
Cobalto/química , DDT/análisis , Peróxidos/química , Contaminantes Químicos del Agua/análisis , Benzofenonas/análisis , Alcohol Bencilo/análisis , Catálisis , Clorobenzoatos/análisis , DDT/química , Espectroscopía de Resonancia por Spin del Electrón , Restauración y Remediación Ambiental , Cromatografía de Gases y Espectrometría de Masas , Cinética , Modelos Teóricos , Oxidación-Reducción , Soluciones , Contaminantes Químicos del Agua/químicaRESUMEN
Polychlorinated biphenyls (PCBs) pose potential ecological risk because of their high toxicity and carcinogenicity. Photodegradation, which is an important process for the removal of PCBs, is greatly influenced by the cosolvent and catalyst. Hence, it is important to explore their effects on the photodegradation behavior of PCBs. In this study, 2,4,4'-trichlorobiphenyl (PCB28) was selected as a model compound, and the effects of two typical cosolvents, namely acetone and ethanol, and TiO2 catalyst on the distributions of free radicals and intermediates were investigated. Interestingly, the TiO2 catalyst did not promote PCB28 photodegradation. Moreover, the free radical distribution was greatly influenced in the presence of the TiO2 catalyst, while was only slightly affected in its absence by the cosolvent kinds. The main photodegradation pathways are proposed on the basis of the distribution of detected intermediates, which were significantly regulated by both the cosolvent and TiO2 catalyst. The results provide novel insights into the photodegradation of PCBs and may have important implications for choosing cosolvent in desorbing soil PCBs and consequently enhancing PCBs degradation.
Asunto(s)
Contaminantes Ambientales/análisis , Radicales Libres/análisis , Bifenilos Policlorados/análisis , Solventes/química , Titanio/química , Rayos Ultravioleta , Acetona/química , Catálisis , Contaminantes Ambientales/efectos de la radiación , Etanol/química , Fotólisis , Bifenilos Policlorados/efectos de la radiaciónRESUMEN
In this study, persulfate (PS) activation by nano-Fe(0) was used to degrade dichlorodiphenyltrichloroethane (DDT), and the mechanism of this process was elucidated with EPR, GC-MS and free-radical quenching studies. It was found that DDT was degraded efficiently in PS/nano-Fe(0), and GC-MS analysis showed that benzoic acid, benzyl alcohol, dichlorobenzophenone and 2,2-bis(p-chlorophenyl)-ethane were the dominant products of DDT degradation, while only dechlorination products (DDD and DDE) were observed in nano-Fe(0) without persulfate. EPR results showed that persulfate activation by nano-Fe(0) led to the production of more sulfate radicals and hydroxyl radicals, which accounted for DDT degradation. But the free radical quenching studies suggested that the addition of ethanol to PS/nano-Fe(0) favored the reductive dechlorination of DDT, which was ascribed that the formed ethanol radical (CH(CH3)OH) enhanced the reductive dechlorination of DDT. Furthermore, the nano-Fe(0) loading not only affected the degradation efficiency of DDT, but also influenced the intermediate product distribution of DDT degradation in the PS/nano-Fe(0) process.
RESUMEN
Persulfate-based in situ chemical oxidation (ISCO) is a promising technique for the remediation of organic compounds contaminated soils. Electrokinetics (EK) provides an alternative method to deliver oxidants into the target zones especially in low permeable-soil. In this study, the flexibility of delivering persulfate by EK to remediate polychlorinated biphenyls (PCBs) polluted soil was investigated. 20% (w/w) of persulfate was injected at the anode, cathode and both electrodes to examine its transport behaviors under electrical field, and the effect of field inversion process was also evaluated. The results showed that high dosage of persulfate could be delivered into S4 section (near cathode) by electroosmosis when persulfate was injected from anode, 30.8% of PCBs was removed from the soil, and the formed hydroxyl precipitation near the cathode during EK process impeded the transportation of persulfate. In contrast, only 18.9% of PCBs was removed with the injection of persulfate from cathode, although the breakthrough of persulfate into the anode reservoir was observed. These results indicated that the electroosmotic flow is more effective for the transportation of persulfate into soil. The addition of persulfate from both electrodes did not significantly facilitate the PCBs oxidation as well as the treatment of electrical field reversion, the reinforced negative depolarization function occurring in the cathode at high current consumed most of the oxidant. Furthermore, it was found that strong acid condition near the anode favored the oxidation of PCBs by persulfate and the degradation of PCBs was in consistent with the oxidation of Soil TOC in EK/persulfate system.
Asunto(s)
Restauración y Remediación Ambiental/métodos , Bifenilos Policlorados/química , Contaminantes del Suelo/química , Suelo/química , Sulfatos/química , Electroquímica , Electrodos , Cinética , Oxidación-Reducción , PermeabilidadRESUMEN
Arsanilic acid (4-amino phenyl arsenic acid, ASA) is widely used in poultry production as feed additives, while most of ASA in the feed is excreted in the animal manure and released into the environment. However, the environmental behaviors of ASA were not well understood. In the present study, the photolysis behaviors of ASA and the toxicity of its metabolites to luminescent bacterium were studied. The results showed that ASA could be photodegraded and this process was strongly affected by solution pH, humic acid and dissolved oxygen. Upon UV irradiation for 360 min, ASA could be completely eliminated, but the reduction of total organic carbon (TOC) was not significant. In addition, NH4(+) ions and inorganic arsenic including arsenite and arsenate were identified as the predominant end-products. The conversion of ASA included both direct and indirect photolysis involving radicals, and its possible photolysis pathways were proposed on the basis of the identified intermediates. Unfortunately, higher adverse effects of the conversion products of ASA on bacteria were observed during the photolysis reaction. The results of present study might be helpful for assessing the environmental persistence and risks of ASA.
Asunto(s)
Ácido Arsanílico/química , Ácido Arsanílico/toxicidad , Contaminantes Ambientales/química , Contaminantes Ambientales/toxicidad , Fotólisis , Aliivibrio fischeri/efectos de los fármacos , Animales , Ácido Arsanílico/metabolismo , Arseniatos/metabolismo , Contaminantes Ambientales/metabolismo , Concentración de Iones de Hidrógeno , Cinética , Oxígeno/químicaRESUMEN
The acute and subacute toxicities of cadmium (Cd) to earthworm Eisenia fetida in the presence and absence of glyphosate were studied. Although Cd is highly toxic to E. fetida, the presence of glyphosate markedly reduced the acute toxicity of Cd to earthworm; both the mortality rate of the earthworms and the accumulation of Cd decreased with the increase of the glyphosate/Cd molar ratio. The subcellular distribution of Cd in E. fetida tissues showed that internal Cd was dominant in the intact cells fraction and the heat-stable proteins fraction. The presence of glyphosate reduced the concentration of Cd in all fractions, especially the intact cells. During a longer period of exposure, the weight loss of earthworm and the total Cd absorption was alleviated by glyphosate. Thus, the herbicide glyphosate can reduce the toxicity and bioavailability of Cd in the soil ecosystems at both short- and long-term exposures.