In situ Raman spectroscopy reveals the structure and dissociation of interfacial water.

Understanding the structure and dynamic process of water at the solid-liquid interface is an extremely important topic in surface science, energy science and catalysis1-3. As model catalysts, atomically flat single-crystal electrodes exhibit well-defined surface and electric field properties, and therefore may be used to elucidate the relationship between structure and electrocatalytic activity at the atomic level4,5. Hence, studying interfacial water behaviour on single-crystal surfaces provides a framework for understanding electrocatalysis6,7. However, interfacial water is notoriously difficult to probe owing to interference from bulk water and the complexity of interfacial environments8. Here, we use electrochemical, in situ Raman spectroscopic and computational techniques to investigate the interfacial water on atomically flat Pd single-crystal surfaces. Direct spectral evidence reveals that interfacial water consists of hydrogen-bonded and hydrated Na+ ion water. At hydrogen evolution reaction (HER) potentials, dynamic changes in the structure of interfacial water were observed from a random distribution to an ordered structure due to bias potential and Na+ ion cooperation. Structurally ordered interfacial water facilitated high-efficiency electron transfer across the interface, resulting in higher HER rates. The electrolytes and electrode surface effects on interfacial water were also probed and found to affect water structure. Therefore, through local cation tuning strategies, we anticipate that these results may be generalized to enable ordered interfacial water to improve electrocatalytic reaction rates.

Tailoring Fluorescence-Phosphorescence Emission with a Single Nanocavity.

Realizing the dual emission of fluorescence-phosphorescence in a single system is an extremely important topic in the fields of biological imaging, sensing, and information encryption. However, the phosphorescence process is usually in an inherently "dark state" at room temperature due to the involvement of spin-forbidden transition and the rapid non-radiative decay rate of the triplet state. In this work, we achieved luminescent harvesting of the dark phosphorescence processes by coupling singlet-triplet molecular emitters with a rationally designed plasmonic cavity. The achieved Purcell enhancement effect of over 1000-fold allows for overcoming the triplet forbidden transitions, enabling radiation enhancement with selectable emission wavelengths. Spectral results and theoretical simulations indicate that the fluorescence-phosphorescence peak position can be intelligently tailored in a broad range of wavelengths, from visible to near-infrared. Our study sheds new light on plasmonic tailoring of molecular emission behavior, which is crucial for advancing research on plasmon-tailored fluorescence-phosphorescence spectroscopy in optoelectronics and biomedicine.

In Situ Probe of the Hydrogen Oxidation Reaction Intermediates on PtRu a Bimetallic Catalyst Surface by Core-Shell Nanoparticle-Enhanced Raman Spectroscopy.

In situ monitoring of the evolution of intermediates and catalysts during hydrogen oxidation reaction (HOR) processes and elucidating the reaction mechanism are crucial in catalysis and energy science. However, spectroscopic information on trace intermediates on catalyst surfaces is challenging to obtain due to the complexity of interfacial environments and lack of in situ techniques. Herein, core-shell nanoparticle-enhanced Raman spectroscopy was employed to probe alkaline HOR processes on representative PtRu surfaces. Direct spectroscopic evidence of an OHad intermediate and RuOx (Ru(+3)/Ru(+4)) surface oxides is simultaneously obtained, verifying that Ru doping onto Pt promotes OHad adsorption on the RuOx surface to react with Had adsorption on the Pt surface to form H2O. In situ Raman, XPS, and DFT results reveal that RuOx coverage tunes the electronic structure of PtRuOx to optimize the adsorption energy of OHad on catalyst surfaces, leading to an improvement in HOR activity. Our findings provide mechanistic guidelines for the rational design of HOR catalysts with high activity.

In Situ Surface-Enhanced Raman Spectroscopy Characterization of Electrocatalysis with Different Nanostructures.

As energy demands increase, electrocatalysis serves as a vital tool in energy conversion. Elucidating electrocatalytic mechanisms using in situ spectroscopic characterization techniques can provide experimental guidance for preparing high-efficiency electrocatalysts. Surface-enhanced Raman spectroscopy (SERS) can provide rich spectral information for ultratrace surface species and is extremely well suited to studying their activity. To improve the material and morphological universalities, researchers have employed different kinds of nanostructures that have played important roles in the development of SERS technologies. Different strategies, such as so-called borrowing enhancement from shell-isolated modes and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS)-satellite structures, have been proposed to obtain highly effective Raman enhancement, and these methods make it possible to apply SERS to various electrocatalytic systems. Here, we discuss the development of SERS technology, focusing on its applications in different electrocatalytic reactions (such as oxygen reduction reactions) and at different nanostructure surfaces, and give a brief outlook on its development.

Real-Time Monitoring of Surface Effects on the Oxygen Reduction Reaction Mechanism for Aprotic Na-O2 Batteries.

Discharging of aprotic sodium-oxygen (Na-O2) batteries is driven by the cathodic oxygen reduction reaction in the presence of sodium cations (Na+-ORR). However, the mechanism of aprotic Na+-ORR remains ambiguous and is system dependent. In-situ electrochemical Raman spectroscopy has been employed to study the aprotic Na+-ORR processes at three atomically ordered Au(hkl) single-crystal surfaces for the first time, and the structure-intermediates/mechanism relationship has been identified at a molecular level. Direct spectroscopic evidence of superoxide on Au(110) and peroxide on Au(100) and Au(111) as intermediates/products has been obtained. Combining these experimental results with theoretical simulation has revealed that the surface effect of Au(hkl) electrodes on aprotic Na+-ORR activity is mainly caused by the different adsorption of Na+ and O2. This work enhances our understanding of aprotic Na+-ORR on Au(hkl) surfaces and provides further guidance for the design of improved Na-O2 batteries.

Adsorption-Induced Active Vanadium Species Facilitate Excellent Performance in Low-Temperature Catalytic NOx Abatement.

Vanadia-based catalysts have been widely used for catalyzing various reactions, including their long-standing application in the deNOx process. It has been commonly considered that various vanadium species dispersed on supports with a large surface area act as the catalytically active sites. However, the role of crystalline V2O5 in selective catalytic reduction of NOx with NH3 (NH3-SCR) remains unclear. In this study, a catalyst with low vanadia loading was synthesized, in which crystalline V2O5 was deposited on a TiO2 support that had been pretreated at a high temperature. Surprisingly, the catalyst, which had a large amount of crystalline V2O5, showed excellent low-temperature NH3-SCR activity. For the first time, crystalline V2O5 on low-vanadium-loading catalysts was found to be transformed to polymeric vanadyl species by the adsorption of NH3. The generated active polymeric vanadyl species played a crucial role in NH3-SCR, leading to remarkably enhanced catalytic performance at low temperatures. This new finding provides a fundamental understanding of the metal oxide-catalyzed chemical reaction and has important implications for the development and commercial applications of NH3-SCR catalysts.

Plasmonic Core-Shell Nanoparticle Enhanced Spectroscopies for Surface Analysis.

Probing the properties and components of reactive surfaces is crucial for illustrating reaction mechanisms. However, common surface analysis techniques are restricted to in situ acquisition of surface information at the molecular scale in the human environment and industrial catalysis processes. Plasmonic spectroscopies are promising tools to solve this problem. This Feature is intended to introduce the plasmonic core-shell nanoparticle enhanced spectroscopies for qualitatively and quantitatively analyzing surface trace species. Four different working modalities are designed for meeting varied needs, involving in situ surface species detection, catalytic process monitoring, labeled sensing, and dual mode analysis. These newly developed plasmonic spectroscopies show great potential not only in fundamental research but also in practical applications.

Core-Shell Nanostructure-Enhanced Raman Spectroscopy for Surface Catalysis.

ConspectusThe rational design of highly efficient catalysts relies on understanding their structure-activity relationships and reaction mechanisms at a molecular level. Such an understanding can be obtained by in situ monitoring of dynamic reaction processes using surface-sensitive techniques. Surface-enhanced Raman spectroscopy (SERS) can provide rich structural information with ultrahigh surface sensitivity, even down to the single-molecule level, which makes it a promising tool for the in situ study of catalysis. However, only a few metals (like Au, Ag, and Cu) with particular nanostructures can generate strong SERS effects. Thus, it is almost impossible to employ SERS to study transition metals (like Pt, Pd, Ru, etc.) and other nonmetal materials that are usually used in catalysis (material limitation). Furthermore, SERS is also unable to study model single crystals with atomically flat surface structures or practical nanocatalysts (morphology limitation). These limitations have significantly hindered the applications of SERS in catalysis over the past four decades since its discovery, preventing SERS from becoming a widely used technique in catalysis. In this Account, we summarize the extensive efforts done by our group since the 1980s, particularly in the past decade, to overcome the material and morphology limitations in SERS. Particular attention has been paid to the work using core-shell nanostructures as SERS substrates, because they provide high Raman enhancement and are highly versatile for application on different catalytic materials. Different SERS methodologies for catalysis developed by our group, including the "borrowing" strategy, shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), and SHINERS-satellite strategy, are discussed in this account, with an emphasis on their principles and applications. These methodologies have successfully overcome the long-standing limitations of traditional SERS, enabling in situ tracking of catalysis at model single-crystal surfaces and practical nanocatalysts that can hardly be studied by SERS. Using these methodologies, we systematically studied a series of fundamentally important reactions, such as oxygen reduction reaction, hydrogen evolution reaction, electrooxidation, CO oxidation, and selective hydrogenation. As such, direct spectroscopic evidence of key intermediates that can hardly be detected by other traditional techniques was obtained. Combined with density functional theory and other in situ techniques, the reaction mechanisms and structure-activity relationships of these catalytic reactions were revealed at a molecular level. Furthermore, the future of SERS in catalysis has also been proposed in this work, which we believe should be focused on the in situ dynamic studies at the single-molecule, or even single-atom, level using techniques with ultrahigh sensitivity or spatial resolution, for example, single-molecule SERS or tip-enhanced Raman spectroscopy. In summary, core-shell nanostructure-enhanced Raman spectroscopies are shown to greatly boost the application of SERS in catalysis, from model systems like single-crystal surfaces to practical nanocatalysts, liquid-solid interfaces to gas-solid interfaces, and electrocatalysis to heterogeneous catalysis to photocatalysis. Thus, we believe this Account would attract increasing attention to SERS in catalysis and opens new avenues for catalytic studies.

Spectroscopic Verification of Adsorbed Hydroxy Intermediates in the Bifunctional Mechanism of the Hydrogen Oxidation Reaction.

Elucidating hydrogen oxidation reaction (HOR) mechanisms in alkaline conditions is vital for understanding and improving the efficiency of anion-exchange-membrane fuel cells. However, uncertainty remains around the alkaline HOR mechanism owing to a lack of direct in situ evidence of intermediates. In this study, in situ electrochemical surface-enhanced Raman spectroscopy (SERS) and DFT were used to study HOR processes on PtNi alloy and Pt surfaces, respectively. Spectroscopic evidence indicates that adsorbed hydroxy species (OHad ) were directly involved in HOR processes in alkaline conditions on the PtNi alloy surface. However, OHad species were not observed on the Pt surface during the HOR. We show that Ni doping promoted hydroxy adsorption on the platinum-alloy catalytic surface, improving the HOR activity. DFT calculations also suggest that the free energy was decreased by hydroxy adsorption. Consequently, tuning OH adsorption by designing bifunctional catalysts is an efficient method for promoting HOR activity.

Probing Interfacial Electronic Effects on Single-Molecule Adsorption Geometry and Electron Transport at Atomically Flat Surfaces.

Clarifying interfacial electronic effects on molecular adsorption is significant in many chemical and biochemical processes. Here, we used STM breaking junction and shell-isolated nanoparticle-enhanced Raman spectroscopy to probe electron transport and adsorption geometries of 4,4'-bipyridine (4,4'-BPY) at Au(111). Modifying the surface with 1-butyl-3-methylimidazolium cation-containing ionic liquids (ILs) decreases surface electron density and stabilizes a vertical orientation of pyridine through nitrogen atom σ-bond interactions, resulting in uniform adsorption configurations for forming molecular junctions. Modulation from vertical, tilted, to flat, is achieved on adding water to ILs, leading to a new peak ascribed to CC stretching of adsorbed pyridyl ring and 316 % modulation of single-molecule conductance. The dihedral angle between adsorbed pyridyl ring and surface decreases with increasing surface electronic density, enhancing electron donation from surface to pyridyl ring.

Probing Electric Field Distributions in the Double Layer of a Single-Crystal Electrode with Angstrom Spatial Resolution using Raman Spectroscopy.

The electrical double layer (EDL) is the extremely important interfacial region involved in many electrochemical reactions, and it is the subject of significant study in electrochemistry and surface science. However, the direct measurement of interfacial electric fields in the EDL is challenging. In this work, both electrochemical resonant Raman spectroscopy and theoretical calculations were used to study electric field distributions in the EDL of an atomically flat single-crystal Au(111) electrode with self-assembled monolayer molecular films. This was achieved using a series of redox-active molecules containing the 4,4'-bipyridinium moiety as a Raman marker that were located at different precisely controlled distances away from the electrode surface. It was found that the electric field and the dipole moment of the probe molecule both directly affected its Raman signal intensity, which in turn could be used to map the electric field distribution at the interface. Also, by variation of the electrolyte anion concentration, the Raman intensity was found to decrease when the electric field strength increased. Moreover, the distance between adjacent Raman markers was ∼2.1 Å. Thus, angstrom-level spatial resolution in the mapping of electric field distributions at the electrode-electrolyte interface was realized. These results directly evidence the EDL structure, bridging the gap between the theoretical and experimental understandings of the interface.

Direct In Situ Raman Spectroscopic Evidence of Oxygen Reduction Reaction Intermediates at High-Index Pt(hkl) Surfaces.

The study of the oxygen reduction reaction (ORR) at high-index Pt(hkl) single crystal surfaces has received considerable interest due to their well-ordered, typical atomic structures and superior catalytic activities. However, it is difficult to obtain direct spectral evidence of ORR intermediates during reaction processes, especially at high-index Pt(hkl) surfaces. Herein, in situ Raman spectroscopy has been employed to investigate ORR processes at high-index Pt(hkl) surfaces containing the [011̅] crystal zone-i.e., Pt(211) and Pt(311). Through control and isotope substitution experiments, in situ spectroscopic evidence of OH and OOH intermediates at Pt(211) and Pt(311) surfaces was successfully obtained. After detailed analysis based on the Raman spectra and theoretical simulation, it was deduced that the difference in adsorption of OOH at high-index surfaces has a significant effect on the ORR activity. This research illuminates and deepens the understanding of the ORR mechanism on high-index Pt(hkl) surfaces and provides theoretical guidance for the rational design of high activity ORR catalysts.

Ag@MoS2 Core-Shell Heterostructure as SERS Platform to Reveal the Hydrogen Evolution Active Sites of Single-Layer MoS2.

Understanding the reaction mechanism for the catalytic process is essential to the rational design and synthesis of highly efficient catalysts. MoS2 has been reported to be an efficient catalyst toward the electrochemical hydrogen evolution reaction (HER), but it still lacks direct experimental evidence to reveal the mechanism for MoS2-catalyzed electrochemical HER process at the atomic level. In this work, we develop a wet-chemical synthetic method to prepare the single-layer MoS2-coated polyhedral Ag core-shell heterostructure (Ag@MoS2) with tunable sizes as efficient catalysts for the electrochemical HER. The Ag@MoS2 core-shell heterostructures are used as ideal platforms for the real-time surface-enhanced Raman spectroscopy (SERS) study owing to the strong electromagnetic field generated in the plasmonic Ag core. The in situ SERS results provide solid Raman spectroscopic evidence proving the S-H bonding formation on the MoS2 surface during the HER process, suggesting that the S atom of MoS2 is the catalytic active site for the electrochemical HER. It paves the way on the design and synthesis of heterostructures for exploring their catalytic mechanism at atomic level based on the in situ SERS measurement.

Shell-Isolated Nanoparticle-Enhanced Luminescence of Metallic Nanoclusters.

Metallic nanoclusters (NCs) have molecular-like structures and unique physical and chemical properties, making them an interesting new class of luminescent nanomaterials with various applications in chemical sensing, bioimaging, optoelectronics, light-emitting diodes (LEDs), etc. However, weak photoluminescence (PL) limits the practical applications of NCs. Herein, an effective and facile strategy of enhancing the PL of NCs was developed using Ag shell-isolated nanoparticle (Ag SHIN)-enhanced luminescence platforms with tuned SHINs shell thicknesses. 3D-FDTD theoretical calculations along with femtosecond transient absorption and fluorescence decay measurements were performed to elucidate the enhancement mechanisms. Maximum enhancements of up to 231-fold for the [Au7Ag8(C≡CtBu)12]+ cluster and 126-fold for DNA-templated Ag NCs (DNA-Ag NCs) were achieved. We evidenced a novel and versatile method of achieving large PL enhancements with NCs with potential for practical biosensing applications for identifying target DNA in ultrasensitive surface analysis.

Polarization- and Wavelength-Dependent Shell-Isolated-Nanoparticle-Enhanced Sum-Frequency Generation with High Sensitivity.

Sum-frequency generation (SFG) spectroscopy is a highly versatile tool for surface analysis. Improving the SFG intensity per molecule is important for observing low concentrations of surface species and intermediates in dynamic systems. Herein, Shell-Isolated-Nanoparticle-Enhanced SFG (SHINE-SFG) was used to probe a model substrate. The model substrate, p-mercaptobenzonitrile adsorbed on a Au film with SHINs deposited on top, provided an enhancement factor of up to 10^{5}. Through wavelength- and polarization-dependent SHINE-SFG spectroscopy, the majority of the signal enhancement was found to come from both plasmon enhanced emission and chemical enhancement mechanisms. A new enhancement regime, i.e., the nonlinear coupling of SHINE-SFG with difference frequency generation, was also identified. This novel mechanism provides insight into the enhancement of nonlinear coherent spectroscopies and a possible strategy for the rational design of enhancing substrates utilizing coupling processes.

Strong coupling between magnetic resonance and propagating surface plasmons at visible light frequencies.

Light-matter interactions in nanostructures have shown great potential in physics, chemistry, surface science, materials science, and nanophotonics. Herein, for the first time, the feasibility of strong coupling between plasmon-induced magnetic resonant and propagating surface plasmonic modes at visible light frequencies is theoretically demonstrated. Taking advantage of the strong coupling between these modes allowed for a narrow-linewidth hybrid mode with a huge electromagnetic field enhancement to be acquired. This work can serve as a promising guide for designing a platform with strong coupling based on magnetic resonance at visible and even ultraviolet light frequencies and also offers an avenue for further exploration of strong light-matter interactions at the nanoscale.

Early Stages of Electrochemical Oxidation of Cu(111) and Polycrystalline Cu Surfaces Revealed by in Situ Raman Spectroscopy.

Investigating the chemical nature of the adsorbed intermediate species on well-defined Cu single crystal substrates is crucial in understanding many electrocatalytic reactions. Herein, we systematically study the early stages of electrochemical oxidation of Cu(111) and polycrystalline Cu surfaces in different pH electrolytes using in situ shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). On Cu(111), for the first time, we identified surface OH species which convert to chemisorbed "O" before forming Cu2O in alkaline (0.01 M KOH) and neutral (0.1 M Na2SO4) electrolytes; while at the Cu(poly) surface, we only detected the presence of surface hydroxide. Whereas, in a strongly acidic solution (0.1 M H2SO4), sulfate replaces the hydroxyl/oxy species. This results improves the understanding of the reaction mechanisms of various electrocatalytic reactions.

In Situ Analysis of Surface Catalytic Reactions Using Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy.

Electrochemistry and heterogeneous catalysis continue to attract enormous interest. In situ surface analysis is a dynamic research field capable of elucidating the catalytic mechanisms of reaction processes. Shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) is a nondestructive technique that has been cumulatively used to probe and analyze catalytic-reaction processes, providing important spectral evidence about reaction intermediates produced on catalyst surfaces. In this perspective, we review recent electrochemical- and heterogeneous-catalysis studies using SHINERS, highlight its advantages, summarize the flaws and prospects for improving the SHINERS technique, and give insight into its future research directions.

Probing the Location of 3D Hot Spots in Gold Nanoparticle Films Using Surface-Enhanced Raman Spectroscopy.

Plasmonic "hot spots" play a key role in surface-enhanced Raman scattering (SERS) enabling its ultrahigh surface sensitivity. Thus, precise prediction and control of the location of hot spots in surface nanostructures is of great importance. However, it is difficult to predict the exact location of hot spots due to complex plasmon competition and synergistic effects in three-dimensional (3D) multiparticle surface configurations. In this work, three types of Au@probe@SiO2 core-shell nanoparticles were prepared and a 3D hot spots matrix was assembled via a consecutive layer on layer deposition method. Combined with SERS, distinct probe molecules were integrated into different layers of the 3D multiparticle nanostructure allowing for the hot spots to be precisely located. Importantly, the hot spots could be controlled and relocated by applying different excitation wavelengths, which was verified by simulations and experimental results. This work proposes a new insight and provides a platform for precisely probing and controlling chemical reactions, which has profound implications in both surface analysis and surface plasmonics.

Background-Free Quantitative Surface Enhanced Raman Spectroscopy Analysis Using Core-Shell Nanoparticles with an Inherent Internal Standard.

Surface enhanced Raman spectroscopy (SERS) is an ultrasensitive label-free analytical technique that can provide unique chemical and structural fingerprint information. However, gaining reliable quantitative analysis with SERS remains a huge challenge because of poor reproducibility and the instability of nanostructured SERS active surfaces. Herein, an effective strategy of coating Au nanoparticles (NPs) with ultrathin and uniform Prussian blue (PB) shell (Au@PB NPs) was developed for quantitative detection of dopamine (DA) concentrations in blood serum and crystal violet (CV) contaminants in lake water. The only intense PB Raman signal at 2155 cm-1 served as an ideal and interference-free internal standard (IS) for correcting fluctuations in the Raman intensities of analytes. Also, the stability of Au@PB NPs was investigated, exhibiting good functionality in strong acid solutions and thermal stability at 100 °C. This work demonstrates a convenient and fast quantitative SERS technique for detecting analyte concentrations in complex systems and has a great number of potential applications for use in analytical chemistry.