Photon-counting CT in Thoracic Imaging: Early Clinical Evidence and Incorporation Into Clinical Practice.

Photon-counting CT (PCCT) is an emerging advanced CT technology that differs from conventional CT in its ability to directly convert incident x-ray photon energies into electrical signals. The detector design also permits substantial improvements in spatial resolution and radiation dose efficiency and allows for concurrent high-pitch and high-temporal-resolution multienergy imaging. This review summarizes (a) key differences in PCCT image acquisition and image reconstruction compared with conventional CT; (b) early evidence for the clinical benefit of PCCT for high-spatial-resolution diagnostic tasks in thoracic imaging, such as assessment of airway and parenchymal diseases, as well as benefits of high-pitch and multienergy scanning; (c) anticipated radiation dose reduction, depending on the diagnostic task, and increased utility for routine low-dose thoracic CT imaging; (d) adaptations for thoracic imaging in children; (e) potential for further quantitation of thoracic diseases; and (f) limitations and trade-offs. Moreover, important points for conducting and interpreting clinical studies examining the benefit of PCCT relative to conventional CT and integration of PCCT systems into multivendor, multispecialty radiology practices are discussed.

Infrapopliteal Segments on Lower Extremity CTA: Prospective Intraindividual Comparison of Energy-Integrating Detector CT and Photon-Counting Detector CT.

BACKGROUND. The higher spatial resolution and image contrast for iodine-containing tissues of photon-counting detector (PCD) CT may address challenges in evaluating small calcified vessels when performing lower extremity CTA by energy-integrating detector (EID) CTA. OBJECTIVE. The purpose of the study was to compare the evaluation of infrapopliteal vasculature between lower extremity CTA performed using EID CT and PCD CT. METHODS. This prospective study included 32 patients (mean age, 69.7 ± 11.3 [SD] years; 27 men, five women) who underwent clinically indicated lower extremity EID CTA between April 2021 and March 2022; participants underwent investigational lower extremity PCD CTA later the same day as EID CTA using a reduced IV contrast media dose. Two radiologists independently reviewed examinations in two sessions, each containing a random combination of EID CTA and PCD CTA examinations; the readers assessed the number of visualized fibular perforators, characteristics of stenoses at 11 infrapopliteal segmental levels, and subjective arterial sharpness. RESULTS. Mean IV contrast media dose was 60.0 ± 11.0 (SD) mL for PCD CTA versus 139.6 ± 11.8 mL for EID CTA (p < .001). The number of identified fibular perforators per lower extremity was significantly higher for PCD CTA than for EID CTA for reader 1 (R1) (mean ± SD, 6.4 ± 3.2 vs 4.2 ± 2.4; p < .001) and reader 2 (R2) (8.8 ± 3.4 vs 7.6 ± 3.3; p = .04). Reader confidence for assessing stenosis was significantly higher for PCD CTA than for EID CTA for R1 (mean ± SD, 82.3 ± 20.3 vs 78.0 ± 20.2; p < .001) but not R2 (89.8 ± 16.7 vs 90.6 ± 7.1; p = .24). The number of segments per lower extremity with total occlusion was significantly lower for PCD CTA than for EID CTA for R2 (mean ± SD, 0.5 ± 1.3 vs 0.9 ± 1.7; p = .04) but not R1 (0.6 ± 1.3 vs 1.0 ± 1.5; p = .07). The number of segments per lower extremity with clinically significant nonocclusive stenosis was significantly higher for PCD CTA than for EID CTA for R1 (mean ± SD, 2.2 ± 2.2 vs 1.6 ± 1.7; p = .01) but not R2 (1.1 ± 2.0 vs 1.1 ± 1.4; p = .89). Arterial sharpness was significantly greater for PCD CTA than for EID CTA for R1 (mean ± SD, 3.2 ± 0.5 vs 1.8 ± 0.5; p < .001) and R2 (3.2 ± 0.4 vs 1.7 ± 0.8; p < .001). CONCLUSION. PCD CTA yielded multiple advantages relative to EID CTA for visualizing small infrapopliteal vessels and characterizing associated plaque. CLINICAL IMPACT. The use of PCD CTA may improve vascular evaluation in patients with peripheral arterial disease.

Training and Verification Requirements for Interpretation of Cardiac CT and MRI: AJR Expert Panel Narrative Review.

The use of cardiac CT and MRI is rapidly expanding based on strong evidence from large international trials. The number of physicians competent to interpret cardiac CT and MRI may be unable to keep pace with the increasing demand. Societies and organizations have prescribed training requirements for interpreting cardiac CT and MRI, with recent updates focusing on the increased breadth of competency that is now required due to ongoing imaging advances. In this AJR Expert Panel Narrative Review, we discuss several aspects of cardiac CT and MRI training, focusing on topics that are uncertain or not addressed in existing society statements and guidelines, including determination of competency in different practice types in real-world settings and the impact of artificial intelligence on training and education. The article is intended to guide updates in professional society training requirements and also inform institutional verification processes.

Utility of CT and MRI in Cardiac Electrophysiology.

Cardiac electrophysiology involves the diagnosis and management of arrhythmias. CT and MRI play an increasingly important role in cardiac electrophysiology, primarily in preprocedural planning of ablation procedures but also in procedural guidance and postprocedural follow-up. The most common applications include ablation for atrial fibrillation (AF), ablation for ventricular tachycardia (VT), and for planning cardiac resynchronization therapy (CRT). For AF ablation, preprocedural evaluation includes anatomic evaluation and planning using CT or MRI as well as evaluation for left atrial fibrosis using MRI, a marker of poor outcomes following ablation. Procedural guidance during AF ablation is achieved by fusing anatomic data from CT or MRI with electroanatomic mapping to guide the procedure. Postprocedural imaging with CT following AF ablation is commonly used to evaluate for complications such as pulmonary vein stenosis and atrioesophageal fistula. For VT ablation, both MRI and CT are used to identify scar, representing the arrhythmogenic substrate targeted for ablation, and to plan the optimal approach for ablation. CT or MR images may be fused with electroanatomic maps for intraprocedural guidance during VT ablation and may also be used to assess for complications following ablation. Finally, functional information from MRI may be used to identify patients who may benefit from CRT, and cardiac vein mapping with CT or MRI may assist in planning access. ©RSNA, 2024 Supplemental material is available for this article.

Multimodality Imaging in Metabolic Syndrome: State-of-the-Art Review.

Metabolic syndrome comprises a set of risk factors that include abdominal obesity, impaired glucose tolerance, hypertriglyceridemia, low high-density lipoprotein levels, and high blood pressure, at least three of which must be fulfilled for diagnosis. Metabolic syndrome has been linked to an increased risk of cardiovascular disease and type 2 diabetes mellitus. Multimodality imaging plays an important role in metabolic syndrome, including diagnosis, risk stratification, and assessment of complications. CT and MRI are the primary tools for quantification of excess fat, including subcutaneous and visceral adipose tissue, as well as fat around organs, which are associated with increased cardiovascular risk. PET has been shown to detect signs of insulin resistance and may detect ectopic sites of brown fat. Cardiovascular disease is an important complication of metabolic syndrome, resulting in subclinical or symptomatic coronary artery disease, alterations in cardiac structure and function with potential progression to heart failure, and systemic vascular disease. CT angiography provides comprehensive evaluation of the coronary and systemic arteries, while cardiac MRI assesses cardiac structure, function, myocardial ischemia, and infarction. Liver damage results from a spectrum of nonalcoholic fatty liver disease ranging from steatosis to fibrosis and possible cirrhosis. US, CT, and MRI are useful in assessing steatosis and can be performed to detect and grade hepatic fibrosis, particularly using elastography techniques. Metabolic syndrome also has deleterious effects on the pancreas, kidney, gastrointestinal tract, and ovaries, including increased risk for several malignancies. Metabolic syndrome is associated with cerebral infarcts, best evaluated with MRI, and has been linked with cognitive decline. ©RSNA, 2024 Test Your Knowledge questions for this article are available in the supplemental material. See the invited commentary by Pickhardt in this issue.

Multisystem Imaging Manifestations of Kidney Failure.

Kidney failure (KF) refers to a progressive decline in glomerular filtration rate to below 15 ml/min per 1.73 m2, necessitating renal replacement therapy with dialysis or renal transplant. The hemodynamic and metabolic alterations in KF combined with a proinflammatory and coagulopathic state leads to complex multisystemic complications. The imaging hallmark of systemic manifestations of KF is bone resorption caused by secondary hyperparathyroidism. Other musculoskeletal complications include brown tumor, osteosclerosis, calcinosis, soft-tissue calcification, and amyloid arthropathy. Cardiovascular complications and infections are the leading causes of death in KF. Cardiovascular complications include accelerated atherosclerosis, cardiomyopathy, pericarditis, myocardial calcinosis, and venous thromboembolism. Neurologic complications such as encephalopathy, osmotic demyelination, cerebrovascular disease, and opportunistic infections are also frequently encountered. Pulmonary complications include edema and calcifications. Radiography and CT are used in assessing musculoskeletal and thoracic complications, while MRI plays a key role in assessing neurologic and cardiovascular complications. CT iodinated contrast material is generally avoided in patients with KF except in situations where the benefit of contrast-enhanced CT outweighs the risks and in patients already undergoing maintenance dialysis. At MRI, group II gadolinium-based contrast material can be safely administered in patients with KF. The authors discuss the extrarenal systemic manifestations of KF, the choice of imaging modality in their assessment, and imaging findings of complications. ©RSNA, 2024 Supplemental material is available for this article.

Multimodality Imaging of Infective Endocarditis.

Infective endocarditis (IE) is a complex multisystemic disease resulting from infection of the endocardium, the prosthetic valves, or an implantable cardiac electronic device. The clinical presentation of patients with IE varies, ranging from acute and rapidly progressive symptoms to a more chronic disease onset. Because of its severe morbidity and mortality rates, it is necessary for radiologists to maintain a high degree of suspicion in evaluation of patients for IE. Modified Duke criteria are used to classify cases as "definite IE," "possible IE," or "rejected IE." However, these criteria are limited in characterizing definite IE in clinical practice. The use of advanced imaging techniques such as cardiac CT and nuclear imaging has increased the accuracy of these criteria and has allowed possible IE to be reclassified as definite IE in up to 90% of cases. Cardiac CT may be the best choice when there is high clinical suspicion for IE that has not been confirmed with other imaging techniques, in cases of IE and perivalvular involvement, and for preoperative treatment planning or excluding concomitant coronary artery disease. Nuclear imaging may have a complementary role in prosthetic IE. The main imaging findings in IE are classified according to the site of involvement as valvular (eg, abnormal growths [ie, "vegetations"], leaflet perforations, or pseudoaneurysms), perivalvular (eg, pseudoaneurysms, abscesses, fistulas, or prosthetic dehiscence), or extracardiac embolic phenomena. The differential diagnosis of IE includes evaluation for thrombus, pannus, nonbacterial thrombotic endocarditis, Lambl excrescences, papillary fibroelastoma, and caseous necrosis of the mitral valve. The location of the lesion relative to the surface of the valve, the presence of a stalk, and calcification or enhancement at contrast-enhanced imaging may offer useful clues for their differentiation. ©RSNA, 2024 Test Your Knowledge questions for this article are available in the supplemental material.

Mitral Annular Disease at Cardiac MRI: What to Know and Look For.

Accurate evaluation of the mitral valve (MV) apparatus is essential for understanding the mechanisms of MV disease across various clinical scenarios. The mitral annulus (MA) is a complex and crucial structure that supports MV function; however, conventional imaging techniques have limitations in fully capturing the entirety of the MA. Moreover, recognizing annular changes might aid in identifying patients who may benefit from advanced cardiac imaging and interventions. Multimodality cardiovascular imaging plays a major role in the diagnosis, prognosis, and management of MV disease. Transthoracic echocardiography is the first-line modality for evaluation of the MA, but it has limitations. Cardiac MRI (CMR) has emerged as a robust imaging modality for assessing annular changes, with distinct advantages over other imaging techniques, including accurate flow and volumetric quantification and assessment of variations in the measurements and shape of the MA during the cardiac cycle. Mitral annular disjunction (MAD) is defined as atrial displacement of the hinge point of the MV annulus away from the ventricular myocardium, a condition that is now more frequently diagnosed and studied owing to recent technical advances in cardiac imaging. However, several unresolved issues regarding MAD, such as the functional significance of pathologic disjunction and how this disjunction advances in the clinical course, require further investigation. The authors review the role of CMR in the assessment of MA disease, with a focus on MAD and its functional implications in MV prolapse and mitral regurgitation. ©RSNA, 2024 Supplemental material is available for this article. See the invited commentary by Stojanovska and Fujikura in this issue.

Improved Pulmonary Artery Evaluation Using High-Pitch Photon-Counting CT Compared to High-Pitch Conventional or Routine-Pitch Conventional Dual-Energy CT.

OBJECTIVE: Pulmonary CT angiography (CTA) to detect pulmonary emboli can be performed using conventional dual-source CT with single-energy acquisition at high-pitch (high-pitch conventional CT), which minimizes motion artifacts, or routine-pitch, dual-energy acquisitions (routine-pitch conventional DECT), which maximize iodine signal. We compared iodine signal, radiation dose, and motion artifacts of pulmonary CTA between these conventional CT modalities and dual-source photon-counting detector CT with high-pitch, multienergy acquisitions (high-pitch photon-counting CT). METHODS: Consecutive clinically indicated pulmonary CTA exams were collected. CT number/noise was measured from the main to right lower lobe segmental pulmonary arteries using 120 kV threshold low, 120 kV, and mixed kV (0.6 linear blend) images. Three radiologists reviewed anonymized, randomized exams, rating them using a 4- or 5-point Likert scale (1 = worst, and 4/5 = best) for contrast enhancement in pulmonary arteries, motion artifacts in aortic root to subsegmental pulmonary arteries, lung image quality; pulmonary blood volume (PBV) map image quality (for multienergy or dual-energy exams), and contribution to reader confidence. RESULTS: One hundred fifty patients underwent high-pitch photon-counting CT (n = 50), high-pitch conventional CT (n = 50), and routine-pitch conventional DECT (n = 50). High-pitch photon-counting CT had lower radiation dose (CTDIvol: 8.1 ± 2.5 vs 9.6 ± 6.8 and 16.2 ± 8.5 mGy, respectively; P < 0.001), and routine-pitch conventional DECT had significantly less contrast (P < 0.009). CT number and CNR measurements were significantly greater at high-pitch photon-counting CT (P < 0.001). Across readers, high-pitch photon-counting CT demonstrated significantly higher subjective contrast enhancement in the pulmonary arteries compared to the other modalities (4.7 ± 0.6 vs 4.4 ± 0.7 vs 4.3 ± 0.7; P = 0.011) and lung image quality (3.4 ± 0.5 vs 3.1 ± 0.5 vs 3.1 ± 0.5; P = 0.013). High-pitch photon-counting CT and high-pitch conventional CT had fewer motion artifacts at all levels compared to DECT (P < 0.001). High-pitch photon-counting CT PBV maps had superior image quality (P < 0.001) and contribution to reader confidence (P < 0.001) compared to routine-pitch conventional DECT. CONCLUSION: High-pitch photon-counting pulmonary CTA demonstrated higher contrast in pulmonary arteries at lower radiation doses with improved lung image quality and fewer motion artifacts compared to high-pitch conventional CT and routine-pitch conventional dual-energy CT.

Milestones in CT: Past, Present, and Future.

In 1971, the first patient CT examination by Ambrose and Hounsfield paved the way for not only volumetric imaging of the brain but of the entire body. From the initial 5-minute scan for a 180° rotation to today's 0.24-second scan for a 360° rotation, CT technology continues to reinvent itself. This article describes key historical milestones in CT technology from the earliest days of CT to the present, with a look toward the future of this essential imaging modality. After a review of the beginnings of CT and its early adoption, the technical steps taken to decrease scan times-both per image and per examination-are reviewed. Novel geometries such as electron-beam CT and dual-source CT have also been developed in the quest for ever-faster scans and better in-plane temporal resolution. The focus of the past 2 decades on radiation dose optimization and management led to changes in how exposure parameters such as tube current and tube potential are prescribed such that today, examinations are more customized to the specific patient and diagnostic task than ever before. In the mid-2000s, CT expanded its reach from gray-scale to color with the clinical introduction of dual-energy CT. Today's most recent technical innovation-photon-counting CT-offers greater capabilities in multienergy CT as well as spatial resolution as good as 125 µm. Finally, artificial intelligence is poised to impact both the creation and processing of CT images, as well as automating many tasks to provide greater accuracy and reproducibility in quantitative applications.

Cardiac MRI: State of the Art.

Cardiac MRI plays an important role in the evaluation of cardiovascular diseases (CVDs), including ischemic heart disease, cardiomyopathy, valvular disease, congenital disease, pericardial disease, and masses. Large multicenter trials have shown the positive impact of MRI-based management on outcomes in several CVDs. These results have made MRI an indispensable technique in the evaluation of these diseases, and cardiac MRI has an important role in multisociety guidelines. MRI is the reference standard for quantification of ventricular volumes and function. Flow imaging enables accurate quantification of flow and velocities through valves, shunts, and surgical conduits or baffles. Late gadolinium enhancement and parametric mapping techniques enable tissue characterization and yield prognostic information. In the past decade, cardiac MRI technology has seen rapid advances in both hardware and sequences. Multiple novel sequences, such as parametric mapping and four-dimensional flow, are increasingly being incorporated into routine clinical practice. Acceleration strategies have matured, allowing faster acquisition of cardiac MRI sequences in patients with arrhythmia and poor breath holding. Challenges of cardiac MRI at high-field-strength magnets and in patients with indwelling cardiac devices or severe renal dysfunction have been mitigated. Artificial intelligence techniques are decreasing the complexity of MRI acquisition and postprocessing. This article reviews the current state of the art and emerging techniques in cardiac MRI.

Comparison of Photon-counting Detector and Energy-integrating Detector CT for Visual Estimation of Coronary Percent Luminal Stenosis.

Background Compared with energy-integrating detector (EID) CT, the improved resolution of photon-counting detector (PCD) CT coupled with high-energy virtual monoenergetic images (VMIs) has been shown to decrease calcium blooming on images in phantoms and cadaveric specimens. Purpose To determine the impact of dual-source PCD CT on visual and quantitative estimation of percent diameter luminal stenosis compared with dual-source EID CT in patients. Materials and Methods This prospective study recruited consecutive adult patients from an outpatient facility between January and March 2022. Study participants underwent clinical dual-source EID coronary CT angiography followed by a research dual-source PCD CT examination. For PCD CT, multienergy data were used to create VMIs at 50 and 100 keV. Two readers independently reviewed EID CT images followed by PCD CT images after a washout period. Readers visually graded the most severe stenosis in terms of percent diameter luminal stenosis for the left main, left anterior descending, right, and circumflex coronary arteries, unblinded to scanner type. Quantitative measures of percent stenosis were made using commercial software. Visual and quantitative estimates of percent stenosis were compared between EID CT and PCD CT using the Wilcoxon signed-rank test. Results A total of 25 participants (median age, 59 years [range, 18-78 years]; 16 male participants) were enrolled. On EID CT images, readers 1 and 2 identified 39 and 32 luminal stenoses, respectively, with a percent diameter luminal stenosis greater than 0%. Visual estimates of percent stenosis were lower on PCD CT images than EID CT images (reader 1: median 20.6% [IQR, 8.8%-61.2%] vs 31.8% [IQR, 12.9%-69.7%], P < .001; reader 2: 6.5% [IQR, 0.4%-54.1%] vs 22.9% [IQR, 1.8%-67.4%], P = .002). No difference was observed between EID CT and PCD CT for quantitative measures of percent stenosis (median difference, -1.5% [95% CI: -3.0%, 2.5%]; P = .51). Conclusion Relative to using EID CT, using PCD CT led to decreases in visual estimates of percent stenosis. © RSNA, 2023 See also the editorial by Murphy and Donnelly in this issue.

Clinical applications of photon counting detector CT.

The X-ray detector is a fundamental component of a CT system that determines the image quality and dose efficiency. Until the approval of the first clinical photon-counting-detector (PCD) system in 2021, all clinical CT scanners used scintillating detectors, which do not capture information about individual photons in the two-step detection process. In contrast, PCDs use a one-step process whereby X-ray energy is converted directly into an electrical signal. This preserves information about individual photons such that the numbers of X-ray in different energy ranges can be counted. Primary advantages of PCDs include the absence of electronic noise, improved radiation dose efficiency, increased iodine signal and the ability to use lower doses of iodinated contrast material, and better spatial resolution. PCDs with more than one energy threshold can sort the detected photons into two or more energy bins, making energy-resolved information available for all acquisitions. This allows for material classification or quantitation tasks to be performed in conjunction with high spatial resolution, and in the case of dual-source CT, high pitch, or high temporal resolution acquisitions. Some of the most promising applications of PCD-CT involve imaging of anatomy where exquisite spatial resolution adds clinical value. These include imaging of the inner ear, bones, small blood vessels, heart, and lung. This review describes the clinical benefits observed to date and future directions for this technical advance in CT imaging. KEY POINTS: • Beneficial characteristics of photon-counting detectors include the absence of electronic noise, increased iodine signal-to-noise ratio, improved spatial resolution, and full-time multi-energy imaging. • Promising applications of PCD-CT involve imaging of anatomy where exquisite spatial resolution adds clinical value and applications requiring multi-energy data simultaneous with high spatial and/or temporal resolution. • Future applications of PCD-CT technology may include extremely high spatial resolution tasks, such as the detection of breast micro-calcifications, and quantitative imaging of native tissue types and novel contrast agents.

Imaging of Cardiac Fibrosis: An Update, From the AJR Special Series on Imaging of Fibrosis.

Myocardial fibrosis (MF) is defined as excessive production and deposition of extracellular matrix (ECM) proteins, resulting in pathologic myocardial remodeling. Three types of MF have been identified: replacement fibrosis from tissue necrosis, reactive fibrosis from myocardial stress, and infiltrative interstitial fibrosis from progressive deposition of non-degradable material such as amyloid. While echocardiography, nuclear medicine, and CT play important roles in the assessment of MF, MRI is pivotal in the evaluation of MF, using the late gadolinium enhancement (LGE) technique as a primary endpoint. The LGE technique focuses on the pattern and distribution of gadolinium accumulation in the myocardium and assists the diagnosis and establishment of the etiology of both ischemic and non-ischemic cardiomyopathy. LGE MRI aids prognostication and risk stratification. In addition, LGE MRI is used to guide management of patients being considered for ablation for arrhythmias. Parametric mapping techniques, including T1 mapping and extracellular volume measurement, allow detection and quantification of diffuse fibrosis, which may not be detected by LGE MRI. These techniques also allow monitoring of disease progression and therapy response. This review provides an update on imaging of MF, including prognostication and risk stratification tools, electrophysiologic considerations, and disease monitoring.

Palliative Procedures for Congenital Heart Disease: Imaging Findings and Complications.

Palliative procedures are performed for congenital heart diseases that are not amenable for definitive surgical procedures or as a component of hybrid procedures along with transcatheter interventions. Multimodality imaging plays an important role in the follow-up of these palliative procedures, mainly for the timely detection of complications and for planning any subsequent palliative or definitive procedure. Echocardiography is the first-line imaging modality, with CT and MRI used as complementary techniques in indeterminate cases. MRI provides anatomic, functional, flow, and tissue characterization information. CT is performed for the evaluation of vascular anatomy and when MRI cannot be performed due to contraindications, challenges, or artifacts. The modified Blalock-Taussig shunt procedure is the most common systemic-pulmonary artery (PA) shunt procedure, with thrombus being the most serious complication. Other complications of systemic-PA shunts include shunt stenosis, infection, pulmonary overcirculation, and cardiac failure. The Glenn shunt procedure is the second stage of palliation in single ventricle physiology, with thrombus, stenosis, superior vena cava syndrome, and infection being the common complications. The Fontan shunt procedure is the third stage of palliation in single ventricle physiology. Complications can be cardiovascular (heart failure, valve regurgitation, thromboembolism, shunt stenosis, arteriovenous malformation), venolymphatic (collaterals, protein-losing enteropathy, plastic bronchitis), or hepatic (congestion, cirrhosis, portal hypertension). PA banding is used to decrease pulmonary flow or to train the systemic ventricle. Complications include stenosis, thrombus, erosion, pseudoaneurysm, and subaortic obstruction. Atrial septostomy and atrial switch procedures are performed for increasing intracardiac mixing. Complications of atrial septostomy can be mechanical, traumatic, embolic, or electrical. Complications of the atrial switch procedure include baffle stenosis, baffle leak, and systemic ventricle failure. The authors review the role of multimodality imaging in the evaluation of these palliative procedures. © RSNA, 2023 See the invited commentary by Bardo and Popescu in this issue. Quiz questions for this article are available through the Online Learning Center.

RadioGraphics Update: Pictorial Guide to CAD-RADS 2.0.

Editor's Note.-RadioGraphics Update articles supplement or update information found in full-length articles previously published in RadioGraphics. These updates, written by at least one author of the previous article, provide a brief synopsis that emphasizes important new information such as technological advances, revised imaging protocols, new clinical guidelines involving imaging, or updated classification schemes.

Utility of CT and MRI in Tricuspid Valve Interventions.

Transcatheter tricuspid valve interventions (TTVIs) comprise a variety of catheter-based interventional techniques for treatment of tricuspid regurgitation (TR) in patients at high surgical risk and those with failed previous surgeries. Several TTVI devices with different mechanisms of action are either currently used or in preclinical evaluation. Echocardiography is the first-line modality for evaluation of tricuspid valve disease that provides information on tricuspid valve morphology, mechanism of TR, and hemodynamics. Cardiac CT and MRI have several advantages for a comprehensive preprocedure evaluation. CT and MRI provide complementary information to that of echocardiography on the mechanism and cause of TR. MRI can quantify the severity of TR using indirect or direct techniques that involve two-dimensional or four-dimensional flow sequences. MRI and CT can also accurately quantify right ventricular volumes and function, which is crucial for timing of intervention. CT provides comprehensive three-dimensional information on the morphology of the valve, annulus, subvalvular apparatus, and adjacent structures. CT is the procedure of choice for evaluation of several device-specific measurements, including tricuspid annulus dimensions, annulus-to-right coronary artery distance, leaflet morphology, coaptation gaps, caval dimensions, and cavoatrial-to-hepatic vein distance. CT allows evaluation of the vascular access as well as optimal procedure fluoroscopic angles and catheter trajectory. Postprocedure CT and MRI are useful in detection of complications such as paravalvular leak, pseudoaneurysm, thrombus, pannus, infective endocarditis, and device migration. © RSNA, 2023 Quiz questions for this article are available in the supplemental material.

Diastology with Cardiac MRI: A Practical Guide.

Diastolic filling of the ventricle is a complex interplay of volume and pressure, contingent on active energy-dependent myocardial relaxation and myocardial stiffness. Abnormal diastolic function is the hallmark of the clinical entity of heart failure with preserved ejection fraction (HFpEF), which is now the dominant type of heart failure and is associated with significant morbidity and mortality. Although echocardiography is the current first-line imaging modality used in evaluation of diastolic function, cardiac MRI (CMR) is emerging as an important technique. The principal role of CMR is to categorize the cause of diastolic dysfunction (DD) and distinguish other entities that manifest similarly to HFpEF, particularly infiltrative and pericardial disorders. CMR also provides prognostic information and risk stratification based on late gadolinium enhancement and parametric mapping techniques. Advances in hardware, sequences, and postprocessing software now enable CMR to diagnose and grade DD accurately, a role traditionally assigned to echocardiography. Two-dimensional or four-dimensional velocity-encoded phase-contrast sequences can measure flow and velocities at the mitral inflow, mitral annulus, and pulmonary veins to provide diastolic functional metrics analogous to those at echocardiography. The commonly used cine steady-state free-precession sequence can provide clues to DD including left ventricular mass, left ventricular filling curves, and left atrial size and function. MR strain imaging provides information on myocardial mechanics that further aids in diagnosis and prognosis of diastolic function. Research sequences such as MR elastography and MR spectroscopy can help evaluate myocardial stiffness and metabolism, respectively, providing additional insights on diastolic function. The authors review the physiology of diastolic function, mechanics of diastolic heart failure, and CMR techniques in the evaluation of diastolic function. ©RSNA, 2023 Quiz questions for this article are available in the supplemental material.

Seeing More with Less: Clinical Benefits of Photon-counting Detector CT.

Photon-counting detector (PCD) CT is an emerging technology that has led to continued innovation and progress in diagnostic imaging after it was approved by the U.S. Food and Drug Administration for clinical use in September 2021. Conventional energy-integrating detector (EID) CT measures the total energy of x-rays by converting photons to visible light and subsequently using photodiodes to convert visible light to digital signals. In comparison, PCD CT directly records x-ray photons as electric signals, without intermediate conversion to visible light. The benefits of PCD CT systems include improved spatial resolution due to smaller detector pixels, higher iodine image contrast, increased geometric dose efficiency to allow high-resolution imaging, reduced radiation dose for all body parts, multienergy imaging capabilities, and reduced artifacts. To recognize these benefits, diagnostic applications of PCD CT in musculoskeletal, thoracic, neuroradiologic, cardiovascular, and abdominal imaging must be optimized and adapted for specific diagnostic tasks. The diagnostic benefits and clinical applications resulting from PCD CT in early studies have allowed improved visualization of key anatomic structures and radiologist confidence for some diagnostic tasks, which will continue as PCD CT evolves and clinical use and applications grow. ©RSNA, 2023 Quiz questions for this article are available in the supplemental material. See the invited commentary by Ananthakrishnan in this issue.

Optimal Virtual Monoenergetic Photon Energy (keV) for Photon-Counting-Detector Computed Tomography Angiography.

OBJECTIVE: This study aimed to determine the optimal photon energy for virtual monoenergetic images (VMI) in computed tomography angiography (CTA) using photon-counting-detector (PCD) CT. METHODS: Under institutional review board approval, 10 patients (abdominal, n = 4; lower extremity, n = 3; head and neck, n = 3) were scanned on an investigational PCD-CT (Count Plus, Siemens Healthcare) at 120 or 140 kV. All images were iteratively reconstructed with Bv48 kernel and 2-mm slice thickness. Axial and coronal VMI maximum-intensity projections were created in the range 40 to 65 keV (5-keV steps). Contrast-to-noise ratio (CNR) was calculated for major arteries in each VMI series. Two radiologists blindly ranked each VMI series for overall image quality and visualization of small vessels and pathology. The median and SD of scores for each photon energy were calculated. In addition, readers identified any VMIs that distinguished itself from others in terms of vessel/pathology visualization or artifacts. RESULTS: Mean iodine CNR was highest in 40-keV VMIs for all evaluated arteries. Across readers, the 50-keV VMI had the highest combined score (2.00 ± 1.11). Among different body parts, the 45-keV VMI was ranked highest for the head-and-neck (1.75 ± 0.68) and lower extremity (2.00 ± 1.41) CTA. Meanwhile, 50- and 55-keV VMIs were ranked highest for abdominal (2.50 ± 1.35 and 2.50 ± 1.56) CTA. The 40-keV VMI received the highest score for iodine visualization in vessels, and the 65-keV VMI for reduced metal/calcium-blooming artifacts. CONCLUSIONS: Quantitatively, VMIs at 40 keV had the highest CNR in major arterial vasculature using PCD-CTA. Based on radiologists' preference, the 45- and 50-keV VMIs were optimal for small body parts (eg, head and neck and lower extremity) and large body parts (eg, abdomen), respectively.