Fluids and Electrolytes under Confinement in Single-Digit Nanopores.

Confined fluids and electrolyte solutions in nanopores exhibit rich and surprising physics and chemistry that impact the mass transport and energy efficiency in many important natural systems and industrial applications. Existing theories often fail to predict the exotic effects observed in the narrowest of such pores, called single-digit nanopores (SDNs), which have diameters or conduit widths of less than 10 nm, and have only recently become accessible for experimental measurements. What SDNs reveal has been surprising, including a rapidly increasing number of examples such as extraordinarily fast water transport, distorted fluid-phase boundaries, strong ion-correlation and quantum effects, and dielectric anomalies that are not observed in larger pores. Exploiting these effects presents myriad opportunities in both basic and applied research that stand to impact a host of new technologies at the water-energy nexus, from new membranes for precise separations and water purification to new gas permeable materials for water electrolyzers and energy-storage devices. SDNs also present unique opportunities to achieve ultrasensitive and selective chemical sensing at the single-ion and single-molecule limit. In this review article, we summarize the progress on nanofluidics of SDNs, with a focus on the confinement effects that arise in these extremely narrow nanopores. The recent development of precision model systems, transformative experimental tools, and multiscale theories that have played enabling roles in advancing this frontier are reviewed. We also identify new knowledge gaps in our understanding of nanofluidic transport and provide an outlook for the future challenges and opportunities at this rapidly advancing frontier.

A culture-free biphasic approach for sensitive and rapid detection of pathogens in dried whole-blood matrix.

Blood stream infections (BSIs) cause high mortality, and their rapid detection remains a significant diagnostic challenge. Timely and informed administration of antibiotics can significantly improve patient outcomes. However, blood culture, which takes up to 5 d for a negative result, followed by PCR remains the gold standard in diagnosing BSI. Here, we introduce a new approach to blood-based diagnostics where large blood volumes can be rapidly dried, resulting in inactivation of the inhibitory components in blood. Further thermal treatments then generate a physical microscale and nanoscale fluidic network inside the dried matrix to allow access to target nucleic acid. The amplification enzymes and primers initiate the reaction within the dried blood matrix through these networks, precluding any need for conventional nucleic acid purification. High heme background is confined to the solid phase, while amplicons are enriched in the clear supernatant (liquid phase), giving fluorescence change comparable to purified DNA reactions. We demonstrate single-molecule sensitivity using a loop-mediated isothermal amplification reaction in our platform and detect a broad spectrum of pathogens, including gram-positive methicillin-resistant and methicillin-susceptible Staphylococcus aureus bacteria, gram-negative Escherichia coli bacteria, and Candida albicans (fungus) from whole blood with a limit of detection (LOD) of 1.2 colony-forming units (CFU)/mL from 0.8 to 1 mL of starting blood volume. We validated our assay using 63 clinical samples (100% sensitivity and specificity) and significantly reduced sample-to-result time from over 20 h to <2.5 h. The reduction in instrumentation complexity and costs compared to blood culture and alternate molecular diagnostic platforms can have broad applications in healthcare systems in developed world and resource-limited settings.

Culture-free biphasic approach for sensitive detection of Escherichia coli O157:H7 from beef samples.

Foodborne illnesses are a major threat to public health also leading to significant mortality and financial and reputational damage to industry. It is very important to detect pathogen presence in food products early, rapidly, and accurately to avoid potential outbreaks and economic loss. However, "gold standard" culture methods, including enrichment of pathogens, can take up to several days. Moreover, the food matrix often interferes with nucleic acid amplification methods of detection, requiring DNA extraction from the sample for successful molecular detection of pathogens. Here, we introduce a "biphasic" amplification method that can achieve high sensitivity detection with background noise from ground beef food samples without culture or other extraction methods in 2.5 h. Homogenized ground beef is dried resulting in an increase in porosity of the dried food matrix to allowing amplification enzymes and primers to access the target DNA and initiate the reaction within the dried food matrix. Using Loop Mediated Isothermal Amplification, we demonstrate the detection of 1-3 cfu of Escherichia coli bacteria in 30 mg of dried food matrix. Our approach significantly lowers the time to result to less than a few hours and have a pronounced impact on reduction of instrumentation complexity and costs.

Structural and Dynamical Properties of H2O and D2O under Confinement.

Water (H2O) is of great societal importance, and there has been a significant amount of research on its fundamental properties and related physical phenomena. Deuterium dioxide (D2O), known as heavy water, also draws much interest as an important medium for medical imaging, nuclear reactors, etc. Although many experimental studies on the fundamental properties of H2O and D2O have been conducted, they have been primarily limited to understanding the differences between H2O and D2O in the bulk state. In this paper, using path integral molecular dynamics simulations, the structural and dynamical properties of H2O and D2O in bulk and under nanoscale confinement in a (14,0) carbon nanotube are studied. We find that in bulk, structural properties such as bond angle and bond length of D2O are slightly smaller than those of H2O while D2O is slightly more structured than H2O. The dipole moment of D2O tends to be 4% higher than that of H2O, and the hydrogen bonding of D2O is also stronger than that of H2O. Under nanoscale confinement in a (14,0) carbon nanotube, H2O and D2O exhibit a smaller bond length and bond angle. The hydrogen bond number decreases, which demonstrates a weakened hydrogen bond interaction. Moreover, confinement results in a lower libration frequency and a higher OH(OD) bond stretching frequency with an almost unchanged HOH(DOD) bending frequency. The D2O-filled (14,0) carbon nanotube is found to have a smaller radial breathing mode than the H2O-filled (14,0) carbon nanotube.

Spontaneous sieving of water from ethanol using angstrom-sized nanopores.

Ethanol is widely used as a precursor in products ranging from drugs to cosmetics. However, distillation of ethanol from aqueous solution is energy intensive and expensive. Here, we show that angstrom-sized nanopores with precisely controlled pore sizes can spontaneously remove water from ethanol-water mixtures through molecular sieving at room temperature and pressure. For small-diameter nanotubes, water-filling is observed, but ethanol is completely excluded, as evidenced by time-dependent density functional theory (TD-DFT) calculations and spectroscopy measurements. Potential of mean force calculations were performed to determine how the free energy barriers for water and ethanol-filling of the nanotubes change with increasing pore size. Water/ethanol selectivity ratio reaching as high as 6700 is observed with a (6,4) nanotube, which has a pore size of 0.204 nm. This selectivity vanishes as the pore size increases beyond 0.306 nm. These findings provide insights that may help realize energy efficient molecular sieving of ethanol and water.

Imaging the electron charge density in monolayer MoS2 at the Ångstrom scale.

Four-dimensional scanning transmission electron microscopy (4D-STEM) has recently gained widespread attention for its ability to image atomic electric fields with sub-Ångstrom spatial resolution. These electric field maps represent the integrated effect of the nucleus, core electrons and valence electrons, and separating their contributions is non-trivial. In this paper, we utilized simultaneously acquired 4D-STEM center of mass (CoM) images and annular dark field (ADF) images to determine the projected electron charge density in monolayer MoS2. We evaluate the contributions of both the core electrons and the valence electrons to the derived electron charge density; however, due to blurring by the probe shape, the valence electron contribution forms a nearly featureless background while most of the spatial modulation comes from the core electrons. Our findings highlight the importance of probe shape in interpreting charge densities derived from 4D-STEM and the need for smaller electron probes.

Anomalous interfacial dynamics of single proton charges in binary aqueous solutions.

Our understanding of the dynamics of charge transfer between solid surfaces and liquid electrolytes has been hampered by the difficulties in obtaining interface, charge, and solvent-specific information at both high spatial and temporal resolution. Here, we measure at the single charge scale the dynamics of protons at the interface between an hBN crystal and binary mixtures of water and organic amphiphilic solvents (alcohols and acetone), evidencing a marked influence of solvation on interfacial dynamics. Applying single-molecule localization microscopy to emissive crystal defects, we observe correlated activation between adjacent ionizable surface defects, mediated by the transport of single excess protons along the solid/liquid interface. Solvent content has a nontrivial effect on interfacial dynamics, leading at intermediate water fraction to an increased surface diffusivity, as well as an increased affinity of the proton charges to the solid surface. Our measurements evidence the notable role of solvation on interfacial proton charge transport.

Selective filling of n-hexane in a tight nanopore.

Molecular sieving may occur when two molecules compete for a nanopore. In nearly all known examples, the nanopore is larger than the molecule that selectively enters the pore. Here, we experimentally demonstrate the ability of single-wall carbon nanotubes with a van der Waals pore size of 0.42 nm to separate n-hexane from cyclohexane-despite the fact that both molecules have kinetic diameters larger than the rigid nanopore. This unexpected finding challenges our current understanding of nanopore selectivity and how molecules may enter a tight channel. Ab initio molecular dynamics simulations reveal that n-hexane molecules stretch by nearly 11.2% inside the nanotube pore. Although at a relatively low probability (28.5% overall), the stretched state of n-hexane does exist in the bulk solution, allowing the molecule to enter the tight pore even at room temperature. These insights open up opportunities to engineer nanopore selectivity based on the molecular degrees of freedom.

Super-resolved Optical Mapping of Reactive Sulfur-Vacancies in Two-Dimensional Transition Metal Dichalcogenides.

Transition metal dichalcogenides (TMDs) represent a class of semiconducting two-dimensional (2D) materials with exciting properties. In particular, defects in 2D-TMDs and their molecular interactions with the environment can crucially affect their physical and chemical properties. However, mapping the spatial distribution and chemical reactivity of defects in liquid remains a challenge. Here, we demonstrate large area mapping of reactive sulfur-deficient defects in 2D-TMDs in aqueous solutions by coupling single-molecule localization microscopy with fluorescence labeling using thiol chemistry. Our method, reminiscent of PAINT strategies, relies on the specific binding of fluorescent probes hosting a thiol group to sulfur vacancies, allowing localization of the defects with an uncertainty down to 15 nm. Tuning the distance between the fluorophore and the docking thiol site allows us to control Föster resonance energy transfer (FRET) process and reveal grain boundaries and line defects due to the local irregular lattice structure. We further characterize the binding kinetics over a large range of pH conditions, evidencing the reversible adsorption of the thiol probes to the defects with a subsequent transitioning to irreversible binding in basic conditions. Our methodology provides a simple and fast alternative for large-scale mapping of nonradiative defects in 2D materials and can be used for in situ and spatially resolved monitoring of the interaction between chemical agents and defects in 2D materials that has general implications for defect engineering in aqueous condition.