RESUMEN
Rechargeable magnesium batteries (RMBs) are regarded as promising candidates for beyond-lithium-ion batteries owing to their high energy density. Moreover, as Mg metal is earth-abundant and has low propensity for dendritic growth, RMBs have the advantages of being more affordable and safer than the currently used lithium-ion batteries. However, the commercial viability of RMBs has been negatively impacted by slow diffusion kinetics in most cathode materials due to the high charge density and strongly polarizing nature of the Mg2+ ion. Nanostructuring of potential cathode materials such as metal chalcogenides offers an effective means of addressing these challenges by providing larger surface area and shorter migration routes. In this article, a review of recent research on the design of metal chalcogenide nanostructures for RMBs' cathode materials is provided. The different types and structures of metal chalcogenide cathodes are discussed, and the synthetic strategies through which nanostructuring of these materials can be achieved are described. An organized summary of their electrochemical performance is also presented, along with an analysis of the current challenges and future directions. Although particular focus is placed on RMBs, many of the nanostructuring concepts that are discussed here can be carried forward to other next-generation energy storage systems.
RESUMEN
Coupling two different materials to create a hybrid nanostructured system is a powerful strategy for achieving synergistically enhanced properties and advanced functionalities. In the case of Au and Cu2-x S, their combination on the nanoscale results in dual plasmonic Au-Cu2-x S nanocomposites that exhibit intense photon absorption in both the visible and the near-infrared spectral ranges. Their strong light-absorbing properties translate to superior photothermal transduction efficiency, making them attractive in photothermal-based applications. There are several nanostructure configurations that are possible for the Au-Cu2-x S system, and the successful fabrication of a particular architecture often requires a carefully planned synthetic strategy. In this Minireview, the different synthetic approaches that can be employed to produce rationally designed Au-Cu2-x S nanocomposites are presented, with a focus on the experimental protocols that can lead to heterodimer, core-shell, reverse core-shell, and yolk-shell configurations. The photothermal behavior of these materials is also discussed, providing a glimpse of their potential use as photothermally active agents in therapeutic and theranostic applications.
Asunto(s)
Oro , Nanocompuestos , FototerapiaRESUMEN
Semiconductor nanostructures that can effectively serve as light-responsive photocatalysts have been of considerable interest over the past decade. This is because their use in light-induced photocatalysis can potentially address some of the most serious environmental and energy-related concerns facing the world today. One important application is photocatalytic hydrogen production from water under solar radiation. It is regarded as a clean and sustainable approach to hydrogen fuel generation because it makes use of renewable resources (i.e., sunlight and water), does not involve fossil fuel consumption, and does not result in environmental pollution or greenhouse gas emission. Another notable application is the photocatalytic degradation of nonbiodegradable dyes, which offers an effective way of ridding industrial wastewater of toxic organic pollutants prior to its release into the environment. Metal oxide semiconductors (e.g., TiO2) are the most widely studied class of semiconductor photocatalysts. Their nanostructured forms have been reported to efficiently generate hydrogen from water and effectively degrade organic dyes under ultraviolet-light irradiation. However, the wide band gap characteristic of most metal oxides precludes absorption of light in the visible region, which makes up a considerable portion of the solar radiation spectrum. Meanwhile, nanostructures of cadmium chalcogenide semiconductors (e.g., CdS), with their relatively narrow band gap that can be easily adjusted through size control and alloying, have displayed immense potential as visible-light-responsive photocatalysts, but the intrinsic toxicity of cadmium poses potential risks to human health and the environment. In developing new nanostructured semiconductors for light-driven photocatalysis, it is important to choose a semiconducting material that has a high absorption coefficient over a wide spectral range and is safe for use in real-world settings. Among the most promising candidates are the multinary chalcogenide semiconductors (MCSs), which include the ternary I-III-VI2 semiconductors (e.g., AgGaS2, CuInS2, and CuInSe2) and the quaternary I2-II-IV-VI4 semiconductors (e.g., Cu2ZnGeS4, Cu2ZnSnS4, and Ag2ZnSnS4). These inorganic compounds consist of environmentally benign elemental components, exhibit excellent light-harvesting properties, and possess band gap energies that are well-suited for solar photon absorption. Moreover, the band structures of these materials can be conveniently modified through alloying to boost their ability to harvest visible photons. In this Account, we provide a summary of recent research on the use of ternary I-III-VI2 and quaternary I2-II-IV-VI4 semiconductor nanostructures for light-induced photocatalytic applications, with focus on hydrogen production and organic dye degradation. We include a review of the solution-based methods that have been employed to prepare multinary chalcogenide semiconductor nanostructures of varying compositions, sizes, shapes, and crystal structures, which are factors that are known to have significant influence on the photocatalytic activity of semiconductor photocatalysts. The enhancement of photocatalytic performance through creation of hybrid nanoscale architectures is also presented. Lastly, views on the current challenges and future directions are discussed in the concluding section.
Asunto(s)
Nanoestructuras , Procesos Fotoquímicos , Semiconductores , Catálisis , Microscopía Electrónica de TransmisiónRESUMEN
With their remarkable properties and wide-ranging applications, nanostructures of noble metals and metal oxides have been receiving significantly increased attention in recent years. The desire to combine the properties of these two functional materials for specific applications has naturally prompted research in the design and synthesis of novel nanocomposites, consisting of both noble metal and metal-oxide components. In this review, particular attention is given to core-shell type metal oxide-coated noble metal nanostructures (i.e., metal@oxide), which display potential utility in applications, including photothermal therapy, catalytic conversions, photocatalysis, molecular sensing, and photovoltaics. Emerging research directions and areas are envisioned at the end to solicit more attention and work in this regard.
RESUMEN
Metal nanostructures display a multitude of technologically useful properties that can be tailored through fine-tuning of certain parameters, such as size, shape and composition. In many cases, the shape or morphology of metal nanostructures plays the most crucial role in the determination of their properties and their suitability in specific applications. In this tutorial review, we provide a summary of recent research that centers on metal nanostructures having anisotropically branched morphologies. The branched structural features that are exhibited by these materials endow them with unique properties that can be utilized in many important applications. The formation of branched architectures can be achieved in solution through a variety of synthetic strategies, four of which are highlighted in this review and these are: (1) seedless growth, (2) seeded growth, (3) templated growth, and (4) chemical etching. The usefulness of these anisotropically branched metal nanostructures in the areas of plasmonics, catalysis and biomedicine is also presented.
RESUMEN
A promising photocatalytic system in the form of heterostructured nanocrystals (HNCs) is presented wherein alloyed ZnS-CuInS2 (ZCIS) semiconductor nanorods are decorated with Pt and Pd4 S nanoparticles. This is apparently the first report on the colloidal preparation and photocatalytic behavior of ZCIS-Pt and ZCIS-Pd4 S nanoscale heterostructures. Incorporation of Pt and Pd4 S cocatalysts leads to considerable enhancement of the photocatalytic activity of ZCIS for visible-light-driven hydrogen production.
RESUMEN
The ability of nanoscopic materials to self-organize into large-scale assembly structures that exhibit unique collective properties has opened up new and exciting opportunities in the field of nanotechnology. Although earlier work on nanoscale self-assembly has focused on colloidal spherical nanocrystals as building blocks, there has been significant interest in recent years in the self-assembly of colloidal nanocrystals having well-defined facets or anisotropic shapes. In this review, particular attention is drawn to anisotropic one-dimensional (1D) nanocrystals, notably nanorods and nanowires, which can be arranged into a multitude of higher-order assembly structures. Different strategies have been developed to realize self-assembly of colloidal 1D nanocrystals and these are highlighted in the first part of this review. Self-assembly can take place (1) on substrates through evaporation control, external field facilitation and template use; (2) at interfaces, such as the liquid-liquid and the gas-liquid interface; and (3) in solutions via chemical bonding, depletion attraction forces and linker-mediated interactions. The choice of a self-assembly approach is pivotal to achieving the desired assembly configuration with properties that can be exploited for functional device applications. In the subsequent sections, the various assembly structures that have been created through 1D nanocrystal self-assembly are presented. These organized structures are broadly categorized into non-close-packed and close-packed configurations, and are further classified based on the different types of 1D nanocrystal alignment (side-by-side and end-to-end), orientation (horizontal and vertical) and ordering (nematic and smectic), and depending on the dimensionality of the structure (2D and 3D). The conditions under which different types of arrangements are achieved are also discussed.
RESUMEN
In fabricating materials at the nanometer scale, nanotechnologists typically employ two general strategies: bottom-up and top-down. While the bottom-up approach constructs nanomaterials from basic building blocks like atoms or molecules, the top-down approach produces nanostructures by deconstructing larger materials with the use of lithographic tools (i.e., physical top-down) or through chemical-based processes (i.e., chemical top-down). This tutorial review summarizes the various top-down nanofabrication methods, with great emphasis on the chemical routes that can generate nanoporous materials and ordered arrays of nanostructures with three-dimensional features. The chemical top-down routes that are discussed in detail include (1) templated etching, (2) selective dealloying, (3) anisotropic dissolution, and (4) thermal decomposition. These emerging nanofabrication tools open up new avenues in the creation of functional nanostructures with a wide array of promising applications.
RESUMEN
Metal-semiconductor nanocomposites have been utilized in a multitude of applications in a wide array of fields, prompting substantial interest from different scientific sectors. Of particular interest are semiconductors paired with plasmonic metals due to the unique optical properties that arise from the individual interactions of these materials with light and the intercomponent movement of charge carriers in their heterostructure. This review focuses on the pairing of Cu2O semiconductor with strongly plasmonic metals, particularly Au and Ag. The design and synthesis of Au-Cu2O and Ag-Cu2O nanostructures, along with ternary nanostructures composed of the three components, are described, with in-depth discussion on the synthesis techniques and tunable parameters. The effects of compositing on the optical and electronic properties of the nanocomposites in the context of photocatalysis are discussed as well. Concluding remarks and potential areas for exploration are presented in the last section.
RESUMEN
Owing to the numerous potential applications of ZnO nanomaterials, the development of ZnO-based nanocomposites has become of great scientific interest in various fields. In this paper, we are reporting the fabrication of a series of ZnO/C nanocomposites through a simple "one-pot" calcination method under three different temperatures, 500 â, 600 â, and 700 â, with samples labeled as ZnO/C-500, -600, and -700, respectively. All samples exhibited adsorption capabilities and photon-activated catalytic and antibacterial properties, with the ZnO/C-700 sample showing superior performance among the three. The carbonaceous material in ZnO/C is key to expanding the optical absorption range and improving the charge separation efficiency of ZnO. The remarkable adsorption property of the ZnO/C-700 sample was demonstrated using Congo red dye, and is credited to its good hydrophilicity. It was also found to exhibit the most notable photocatalysis effect due to its high charge transfer efficiency. The hydrophilic ZnO/C-700 sample was also examined for antibacterial effects both in vitro (against Escherichia coli and Staphylococcus aureus) and in vivo (against MSRA-infected rat wound model), and it was observed to exhibit synergistic killing performance under visible-light irradiation. A possible cleaning mechanism is proposed on the basis of our experimental results. Overall, this work presents a facile way of synthesizing ZnO/C nanocomposites with outstanding adsorption, photocatalysis, and antibacterial properties for the efficient treatment of organic and bacterial contaminants in wastewater.
Asunto(s)
Nanocompuestos , Purificación del Agua , Óxido de Zinc , Animales , Ratas , Óxido de Zinc/farmacología , Adsorción , Antibacterianos/farmacología , Purificación del Agua/métodos , Interacciones Hidrofóbicas e Hidrofílicas , CatálisisRESUMEN
Rod-like nanocrystals of the semiconductor alloy (ZnS)(x)(CuInS(2))(1-x) (ZCIS) have been colloidally prepared by using a one-pot non-injection-based synthetic strategy. The ZCIS nanorods crystallize in the hexagonal wurtzite structure and display preferential growth in the direction of the c axis. The bandgap of these quarternary alloyed nanorods can be conveniently tuned by varying the ratio of ZnS to CuInS(2). A non-linear relationship between the bandgap and the alloy composition is observed. The ZCIS nanorods are found to exhibit promising photocatalytic behaviour in visible-light-driven degradation of Rhodamine B.
Asunto(s)
Cobre/química , Indio/química , Nanotubos/química , Sulfuros/química , Compuestos de Zinc/química , Catálisis , Coloides/síntesis química , Coloides/química , Procesos Fotoquímicos , SemiconductoresRESUMEN
Bifunctional nanohybrids possessing both plasmonic and magnetic functionalities are of great interest for biomedical applications owing to their capability for simultaneous therapy and diagnostics. Herein, we fabricate a core-shell structured plasmonic-magnetic nanocomposite system that can serve as a dual-functional agent due to its combined photothermal therapeutic and magnetic resonance imaging (MRI) functions. The photothermal activity of the hybrid is attributed to its plasmonic Au core, which is capable of absorbing near-infrared (NIR) light and converting it into heat. Meanwhile, the magnetic MgFe2O4 shell exerts its ability to act as a MRI contrast agent. Our in vivo studies using tumor-bearing mice demonstrated the nanohybrids' excellent photothermal and MRI properties. As a photothermal therapeutic agent, the nanohybrids were able to dramatically shrink solid tumors in mice through NIR-induced hyperthermia. As T 2-weighted MRI contrast agents, the nanohybrids were found capable of substantially reducing the MRI signal intensity of the tumor region at 10 min postinjection. With their dual plasmonic-magnetic functionality, these Au@MgFe2O4 nanohybrids hold great promise not only in the biomedical field but also in the areas of catalysis and optical sensing.
RESUMEN
Nanodisk heterostructures consisting of monoclinic Cu(1.94)S and wurtzite CdS have been colloidally synthesized for the first time. Initially, hexagonal-shaped nanodisks of Cu(1.94)S were produced upon thermolysis of a copper complex in a solvent mixture of HDA and TOA at 250 °C. Rapid addition of Cd precursor to the reaction mixture resulted in the partial conversion of Cu(1.94)S into CdS, yielding Cu(1.94)S-CdS nanoheterostructures. The original morphology of the Cu(1.94)S nanodisks was conserved during the transformation. When Zn precursor was added together with the Cd precursor, Cu(1.94)S-Zn(x)Cd(1-x)S nanodisks were generated. These two-component nanostructures are potentially useful in the fabrication of heterojunction solar cells.
Asunto(s)
Cadmio/química , Cobre/química , Nanoestructuras , Sulfuros/química , Zinc/química , Microscopía Electrónica de Transmisión , Nanoestructuras/químicaRESUMEN
The ability to engineer the band gap energy of semiconductor nanocrystals has led to the development of nanomaterials with many new exciting properties and applications. Band gap engineering has thus proven to be an effective tool in the design of new nanocrystal-based semiconductor devices. As reported in numerous publications over the last three decades, tuning the size of nanocrystalline semiconductors is one way of adjusting the band gap energy. On the other hand, research on band gap engineering via control of nanocrystal composition, which is achieved by adjusting the constituent stoichiometries of alloyed semiconductors, is still in its infancy. In this Account, we summarize recent research on colloidal alloyed semiconductor nanocrystals that exhibit novel composition-tunable properties. Alloying of two semiconductors at the nanometer scale produces materials that display properties distinct not only from the properties of their bulk counterparts but also from those of their parent semiconductors. As a result, alloyed nanocrystals possess additional properties that are composition-dependent aside from the properties that emerge due to quantum confinement effects. For example, although the size-dependent emission wavelength of the widely studied CdSe nanocrystals can be continuously tuned to cover almost the entire visible spectrum, the near-infrared (NIR) region is far outside its spectral range. By contrast, certain alloy compositions of nanocrystalline CdSe(x)Te(1-x), an alloy of CdSe and CdTe, can efficiently emit light in the NIR spectral window. These NIR-emitting nanocrystals are potentially useful in several biomedical applications. In addition, highly stable nanocrystals formed by alloying CdSe with ZnSe (i.e., Zn(x)Cd(1-x)Se) emit blue light with excellent efficiency, a property seldom achieved by the parent binary systems. As a result, these materials can be used in short-wavelength optoelectronic devices. In the future, we foresee new discoveries related to these interesting nanoalloys. In particular, colloidal semiconductor nanoalloys that exhibit composition-dependent magnetic properties have yet to be reported. Further studies of the alloying mechanism are also needed to develop improved synthetic strategies for the preparation of these alloyed nanomaterials.
Asunto(s)
Aleaciones/química , Nanopartículas/química , Semiconductores , Técnicas de Química Analítica , Fuentes Generadoras de Energía , Nanopartículas/clasificación , Fenómenos Ópticos , Semiconductores/clasificaciónRESUMEN
Bimetallic nanostructures are emerging as a significant class of metal nanomaterials due to their exceptional properties that are useful in various areas of science and technology. When used for catalysis and sensing applications, bimetallic nanostructures have been noted to exhibit better performance relative to their monometallic counterparts owing to synergistic effects. Furthermore, their dual metal composition and configuration can be modulated to achieve optimal activity for the desired functions. However, as with other nanostructured metals, bimetallic nanostructures are usually prepared through wet chemical routes that involve the use of harsh reducing agents and hazardous stabilizing agents. In response to intensifying concerns over the toxicity of chemicals used in nanomaterial synthesis, the scientific community has increasingly turned its attention toward environmentally and biologically compatible reagents that can enable green and sustainable nanofabrication processes. This article aims to provide an evaluation of the green synthetic methods of constructing bimetallic nanostructures, with emphasis on the use of biogenic resources (e.g., plant extracts, DNA, proteins) as safe and practical reagents. Special attention is devoted to biogenic synthetic protocols that demonstrate controllable nanoscale features, such as size, composition, morphology, and configuration. The potential use of these biogenically prepared bimetallic nanostructures as catalysts and sensors is also discussed. It is hoped that this article will serve as a valuable reference on bimetallic nanostructures and will help fuel new ideas for the development of more eco-friendly strategies for the controllable synthesis of various types of nanostructured bimetallic systems.
RESUMEN
Pristine and substituted tetrahedrite nanoparticles have shown immense potential as low-cost and sustainable materials for energy conversion applications. However, the commonly used synthetic methods for their production are cumbersome and are not easily scalable. In this work, we report a facile colloidal synthetic protocol for the preparation of phase-pure samples of pristine (Cu12 Sb4 S13 ) and Zn-substituted (Cu11 ZnSb4 S13 ) tetrahedrite nanoparticles on the gram scale. Both tetrahedrite compositions were found to be photothermally responsive, enabling their use in solar-driven water evaporation.
RESUMEN
Titanium dioxide (TiO2) nanomaterials have been ubiquitously investigated as a photocatalyst for organic contaminant treatment in wastewater due to their exemplary semiconductor properties. However, their huge band gap remains a barrier for visible light absorption, limiting their utility in practical applications. The incorporation of noble metals in the TiO2 scaffold would help mitigate the problem via plasmonic resonance enhancements. Silver (Ag) is the chosen noble metal as it is relatively cheap and has great plasmonic effects. In this study, the use of electrospun Ag-embedded TiO2 nanofibers as a photocatalyst is shown to be effective in decomposing rhodamine B and methyl orange dyes under a solar simulator in 3 h, which is more efficacious as opposed to pristine TiO2 nanofibers. This showcases the potential of a simple and economic wastewater treatment system for the removal of organic pollutants.
RESUMEN
TiO2-based nanomaterials are among the most promising photocatalysts for degrading organic dye pollutants. In this work, Au-TiO2 nanofibers were fabricated by the electrospinning technique, followed by calcination in air at 500 °C. Morphological and structural analyses revealed that the composite consists of TiO2 nanofibers with embedded Au nanoparticles that are extensively distributed throughout the porous fibrous structure of TiO2. The photocatalytic performance of these Au-embedded TiO2 nanofibers was evaluated in the photodegradation of Rhodamine B and methylene blue under solar simulator irradiation. Compared with pristine TiO2 nanofibers, the Au-embedded TiO2 nanofibers displayed far better photocatalytic degradation efficiency. The plasmon resonance absorption of Au nanoparticles in the visible spectral region and the effective charge separation at the heterojunction of the Au-TiO2 hybrid are the key factors that have led to the considerable enhancement of the photocatalytic activity. The results of this study clearly demonstrate the potential of Au-TiO2 electrospun nanofibers as solar-light-responsive photocatalysts for the effective removal of dye contaminants from aquatic environments.
Asunto(s)
Contaminantes Ambientales , Nanopartículas del Metal , Nanofibras , Catálisis , Oro , TitanioRESUMEN
Tetrahedrite (Cu12Sb4S13) is a highly promising environmentally friendly material for energy conversion applications but its synthesis generally requires several days of heating at high temperature conditions. To fabricate tetrahedrite in a more rapid way and under milder conditions, solvothermal synthesis has been recently explored. However, a common problem faced when using this technique is the formation of significant amounts of other ternary Cu-Sb-S phases along with the desired tetrahedrite phase. Here, we present an optimized solvothermal procedure for synthesizing high-purity samples of tetrahedrite at moderate temperatures and reasonable heating times. The as-prepared samples are single-crystalline nanometer-sized structures having multiple voids or pores. By modifying certain experimental parameters such as the reaction temperature and heating time, we have shown that we can alter the nanocrystal architecture. The formation mechanism was investigated and it was found that these porous tetrahedrite nanostructures are a product of the non-classical oriented aggregation growth process. Porosity in nanomaterials is known to improve material properties and is desirable in many important applications so the construction of void-containing tetrahedrite nanostructures will potentially extend the utility of tetrahedrite to a wider range of applications. In this work, we explore its possible use as a photothermal-responsive drug delivery vehicle.