Multisignal Biosensors Based on Mn Paramagnetic Relaxation and Nanocatalysis for Norovirus Detection.

A multisignal method for the sensitive detection of norovirus based on Mn paramagnetic relaxation and nanocatalysis was developed. This dual-modality sensing platform was based on the strong relaxation generated by cracked Au@MnO2 nanoparticles (NPs) and their intrinsic enzyme-like activity. Ascorbic acid rapidly cracked the MnO2 layer of Au@MnO2 NPs to release Mn(II), resulting in the relaxation modality being in a "switch-on" state. Under the optimal conditions, the relaxation modality exhibited a wide working range (6.02 × 103-3.01 × 107 copies/µL) and a limit of detection (LOD) of 2.29 × 103 copies/µL. Using 4,4',4″,4″'-(porphine-5,10,15,20-tetrayl) tetrakis (benzenesulfonic acid) (tpps)-ß-cyclodextrin (tpps-ß-CD) as a T1 relaxation signal amplification reagent, a lower LOD was obtained. The colorimetric modality exploited the "peroxidase/oxidase-like" activity of Au@MnO2 NPs, which catalyzed the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB, which exhibited a working range (6.02 × 104-6.02 × 106 copies/µL) and an LOD of 2.6 × 104 copies/µL. In addition, the rapid amplification reaction of recombinase polymerase enabled the detection of low norovirus levels in food samples and obtained a working range of 101-106 copies/mL and LOD of 101 copies/mL (relaxation modality). The accuracy of the sensor in the analysis of spiked samples was consistent with that of the real-time quantitative reverse transcription polymerase chain reaction, demonstrating the high accuracy and practical utility of the sensor.

Synthetic biology for the food industry: advances and challenges.

As global environmental pollution increases, climate change worsens, and population growth continues, the challenges of securing a safe, nutritious, and sustainable food supply have become enormous. This has led to new requirements for future food supply methods and functions. The use of synthetic biology technology to create cell factories suitable for food industry production and renewable raw material conversion into: important food components, functional food additives, and nutritional chemicals, represents an important method of solving the problems faced by the food industry. Here, we review the recent progress and applications of synthetic biology in the food industry, including alternatives to: traditional (artificial pigments, meat, starch, and milk), functional (sweeteners, sugar substitutes, nutrients, flavoring agents), and green (green fiber, degradable packing materials, green packaging materials and food traceability) foods. Furthermore, we discuss the future prospects of synthetic biology-based applications in the food industry. Thus, this review may serve as a reference for research on synthetic biology in the: food safety, food nutrition, public health, and health-related fields.

Rapid detection of melamine by DNA Walker mediated SERS sensing technique based on signal amplification function.

A new method is proposed for detecting typical melamine dopants in food using surface-enhanced Raman scattering (SERS) biosensing technology. Melamine specific aptamer was used as the identification probe, and gold magnets (AuNPs@MNPs) and small gold nanoparticles (AuNPs@MBA) were used as the basis for Raman detection. The Raman signal of the detection system can directly detect melamine quantitatively. Under optimized conditions, the detection of melamine was carried out in the low concentration range of 0.001-500 mg/kg, the enhancement factor (EF) was 2.3 × 107, and the detection limit was 0.001 mg/kg. The method is sensitive and rapid, and can be used for the rapid detection of melamine in the field environment.

Application of DNA-fueled molecular machines in food safety testing.

Food is consumed by humans, which is indispensable to human life. Therefore, considerable attention of the whole society has been paid to food safety. Over the last few years, dramatic social development has brought new challenges to food safety, making developing new and quick methods for on-site food safety testing an important necessity. As a result, DNA-fueled molecular machines, characterized by high efficiency, accuracy, and sensitivity in testing, have come into the spotlight, based on which sensors can be constructed to detect toxic and harmful substances in food products. This study reviewed recent research on several DNA-fueled molecular machines, including DNA tweezers, DNA walkers, and DNA origami, for rapidly detecting toxic and harmful substances. Based on the above studies, the sensitivity and timeliness of several DNA molecular machines were summarized and compared, and the development prospect of DNA fuel molecular machines in the field of food safety detection was prospected.

Stimuli-responsive DNA-based hydrogels for biosensing applications.

The base sequences of DNA are endowed with the rich structural and functional information and are available for the precise construction of the 2D and 3D macro products. The hydrogels formed by DNA are biocompatible, stable, tunable and biologically versatile, thus, these have a wide range of promising applications in bioanalysis and biomedicine. In particular, the stimuli-responsive DNA hydrogels (smart DNA hydrogels), which exhibit a reversible and switchable hydrogel to sol transition under different triggers, have emerged as smart materials for sensing. Thus far, the combination of the stimuli-responsive DNA hydrogels and multiple sensing platforms is considered as biocompatible and is useful as the flexible recognition components. A review of the stimuli-responsive DNA hydrogels and their biosensing applications has been presented in this study. The synthesis methods to prepare the DNA hydrogels have been introduced. Subsequently, the current status of the stimuli-responsive DNA hydrogels in biosensing has been described. The analytical mechanisms are further elaborated by the combination of the stimuli-responsive DNA hydrogels with the optical, electrochemical, point-of-care testing (POCT) and other detection platforms. In addition, the prospects of the application of the stimuli-responsive DNA hydrogels in biosensing are presented.

CRISPR/Cas12a-based technology: A powerful tool for biosensing in food safety.

BACKGROUND: In the context of the current pandemic caused by the novel coronavirus, molecular detection is not limited to the clinical laboratory, but also faces the challenge of the complex and variable real-time detection fields. A series of novel coronavirus events were detected in the process of food cold chain packaging and transportation, making the application of molecular diagnosis in food processing, packaging, transportation, and other links urgent. There is an urgent need for a rapid detection technology that can adapt to the diversity and complexity of food safety. SCOPE AND APPROACH: This review introduces a new molecular diagnostic technology-biosensor analysis technology based on CRISPR-Cas12a. Systematic clarification of its development process and detection principles. It summarizes and systematically organizes its applications in viruses, food-borne pathogenic bacteria, small molecule detection, etc. In the past four years, which provides a brand-new and comprehensive solution for food detection. Finally, this article puts forward the challenges and the prospects for food safety. KEY FINDINGS AND CONCLUSIONS: The novel coronavirus hazards infiltrated every step of the food industry, from processing to packaging to transportation. The biosensor analytical technology based on CRISPR-Cas12a has great potential in the qualitative and quantitative analysis of infectious pathogens. CRISPR-Cas12a can effectively identify the presence of the specific nucleic acid targets and the small changes in sequences, which is particularly important for nucleic acid identification and pathogen detection. In addition, the CRISPR-Cas12a method can be adjusted and reconfigured within days to detect other viruses, providing equipment for nucleic acid diagnostics in the field of food safety. The future work will focus on the development of portable microfluidic devices for multiple detection. Shao et al. employed physical separation methods to separate Cas proteins in different microfluidic channels to achieve multiple detection, and each channel simultaneously detected different targets by adding crRNA with different spacer sequences. Although CRISPR-Cas12a technology has outstanding advantages in detection, there are several technical barriers in the transformation from emerging technologies to practical applications. The newly developed CRISPR-Cas12a-based applications and methods promote the development of numerous diagnostic and detection solutions, and have great potential in medical diagnosis, environmental monitoring, and especially food detection.

Tamoxifen Exerts Anticancer Effects on Pituitary Adenoma Progression via Inducing Cell Apoptosis and Inhibiting Cell Migration.

Although pituitary adenomas are histologically benign, they are often accompanied by multiple complications, such as cardiovascular disease and metabolic dysfunction. In the present study, we repositioned the Food and Drug Administration -approved immune regulator tamoxifen to target STAT6 based on the genomics analysis of PAs. Tamoxifen inhibited the proliferation of GH3 and AtT-20 cells with respective IC50 values of 9.15 and 7.52 µM and increased their apoptotic rates in a dose-dependent manner. At the molecular level, tamoxifen downregulated phosphorylated PI3K, phosphorylated AKT and the anti-apoptotic protein Bcl-2 and increased the expression of pro-apoptotic proteins p53 and Bax in GH3 and AtT-20 cells. Furthermore, tamoxifen also inhibited the migration of both cell lines by reprogramming tumor-associated macrophages to the M1 phenotype through STAT6 inactivation and inhibition of the macrophage-specific immune checkpoint SHP1/SHP. Finally, administration of tamoxifen (20, 50, 100 mg·kg-1·d-1, for 21 days) inhibited the growth of pituitary adenomas xenografts in nude mice in a dose-dependent manner. Taken together, tamoxifen is likely to be a promising combination therapy for pituitary adenomas and should be investigated further.

Fabrication of Magnetic Al-Based Fe3O4@MIL-53 Metal Organic Framework for Capture of Multi-Pollutants Residue in Milk Followed by HPLC-UV.

The efficient capture of multi-pollutant residues in food is vital for food safety monitoring. In this study, in-situ-fabricated magnetic MIL-53(Al) metal organic frameworks (MOFs), with good magnetic responsiveness, were synthesized and applied for the magnetic solid-phase extraction (MSPE) of chloramphenicol, bisphenol A, estradiol, and diethylstilbestrol. Terephthalic acid (H2BDC) organic ligands were pre-coupled on the surface of amino-Fe3O4 composites (H2BDC@Fe3O4). Fe3O4@MIL-53(Al) MOF was fabricated by in-situ hydrothermal polymerization of H2BDC, Al (NO3)3, and H2BDC@Fe3O4. This approach highly increased the stability of the material. The magnetic Fe3O4@MIL-53(Al) MOF-based MSPE was combined with high-performance liquid chromatography-photo diode array detection, to establish a novel sensitive method for analyzing multi-pollutant residues in milk. This method showed good linear correlations, in the range of 0.05-5.00 µg/mL, with good reproducibility. The limit of detection was 0.004-0.108 µg/mL. The presented method was verified using a milk sample, spiked with four pollutants, which enabled high-throughput detection and the accuracies of 88.17-107.58% confirmed its applicability, in real sample analysis.

Dual Sensitization Smartphone Colorimetric Strategy Based on RCA Coils Gathering Au Tetrahedra and Its Application in the Detection of CK-MB.

In recent years, the combination of DNA nanotechnology and biosensing has been extensively reported. Herein, we attempted to develop a dual sensitization smartphone colorimetric strategy based on rolling circle amplification (RCA) coils gathering Au tetrahedra and explore its application. The dual sensitization effect of this strategy was achieved by rolling circle amplification (RCA) and Au tetrahedra. Under the initiation of the complementary DNA, a large number of ssDNA were generated, achieving amplification of the reaction signal. At the same time, due to the formation of Au tetrahedra, more gold nanoparticles could be gathered under the same conditions, and the signal would be amplified again. Using software ImageJ, the gray value of the reaction solution can be analyzed, detecting the target timely under the practical conditions of lack of equipment. By selecting aptamers with strong binding affinity, we applied this strategy to detect creatine kinase isoenzymes (CK-MB), showing a limit of detection of 0.8 pM, which performed well in actual detection and can meet the needs for real-time detection of CK-MB. Therefore, a universal detection platform was developed, which has broad application prospects in biosensing, clinical diagnosis, food detection, and other fields.

The orphan nuclear receptor Nur77 plays a vital role in BPA-induced PC12 cell apoptosis.

Bisphenol A (BPA) is a typical environmental endocrine disruptor that can migrate into organisms through skin contact, breathing, diet and various other approaches. The reproductive toxicity and neurotoxicity of BPA has been confirmed by several toxicological studies. However, the neurotoxicity of BPA is still controversial. In the present study, we used PC12 cells as a model to investigate the mechanism of BPA-induced neuronal apoptosis. BPA exposure reduced cell viability, altered cell morphology and aggravated intracellular Lactate dehydrogenase (LDH) release, intracellular Ca2+ concentration, Reactive oxygen species (ROS) levels, apoptosis and the reduction in the mitochondrial transmembrane potential (ΔΨm). Moreover, the results of the Western blot (WB) and Real-time quantitative polymerase chain reaction (RT-qPCR) assays indicated that the expression levels of Nur77 in the BPA group were down-regulated and accompanied by the downregulation of the NF-κb/Bcl-2 proteins and the upregulation of cleaved-caspase 3, which is a marker of apoptosis. However, these changes were significantly reversed with the upregulation of the Nur77 protein by introducing plasmids carrying the nur77 gene. These results indicated that BPA-induced apoptosis was closely related to Nur77-mediated inhibition of the NF-κb/Bcl-2 pathway.

A Colorimetric Strip for Rapid Detection and Real-Time Monitoring of Histamine in Fish Based on Self-Assembled Polydiacetylene Vesicles.

Self-assembled polydiacetylene (PDA) vesicles, with the distinct advantages of low-cost materials, simple preparation, and excellent chromatic properties, can be perfectly combined with a colorimetric strip for on-site inspection. Herein, without involving expensive reagents and instruments, a visual colorimetric strip based on well-prepared PDA vesicles was developed to analyze and monitor histamine in deep-sea fish and its canned food. The standard calorimetric card for semiquantitative detection of histamine was successfully prepared and the quantitative detection can be further realized by analyzing the gray value using ImageJ and "Color Grab" in a smart phone. After optimizing the assembly conditions, this assay exhibited a linear response to histamine within the range from 70 to 2240 ppm. With excellent stability and sensitivity, this strip can be used to monitor the quality change of canned fish at different temperatures, so that people can avoid suffering from histamine poisoning, suggesting that it holds great potential in the intelligent system for on-site detection and real-time monitoring.

A low-field nuclear magnetic resonance DNA-hydrogel nanoprobe for bisphenol A determination in drinking water.

A low-field nuclear magnetic resonance (LF-NMR) DNA-hydrogel (LNDH) nanoprobe was designed for bisphenol A (BPA) determination. It consists of Fe3O4 superparamagnetic iron oxide nanoparticles (SPIONs) and a DNA-hydrogel technology. Fe3O4 SPIONs were encapsulated in the DNA-hydrogel to form an aggregated state. After adding BPA, the gel system transformed into a sol gel due to the target-aptamer specific binding. The coated gathered particles dispersed and thus, the relaxation time T2 declined. The LNDH nanoprobe was developed to realize a simple, sensitive, and effective BPA determination method without repeated magnetic separation steps. Under the optimal experimental conditions, the determination range of the LNDH biosensor was 10-2~102 ng mL-1 and the limit of determination was 0.07 ng mL-1. The LNDH nanoprobe was applied to two kinds of water samples (tap water and bottled water). The recovery ranged from 87.85 to approximately 97.87%. This strategy offered a new method to detect BPA by LF-NMR. It is also expected to be applicable in related fields of food safety determination, environmental monitoring, and clinical diagnosis. Graphical abstract Schematic presentation of LNDH biosensor. Acrydite-modified ssDNA was copolymerized with acrylamide to form linear conjugates PS-A/B, adding aptamer and SPIONs to form DNA-hydrogel. When aptamer captured the target, the hydrogel was destroyed to disperse the coated SPIONs. T2 relaxation time declined.

An ultrasensitive sensor based on quantitatively modified upconversion particles for trace bisphenol A detection.

Bisphenol A (BPA) is one of the endocrine-disrupting chemicals which might cause reproductive and endocrine system diseases, and poses a serious threat to the ecosystem and human health. This paper reports an ultrasensitive sensor for trace BPA detection employing fluorescence resonance energy transfer (FRET) between modified upconversion nanoparticles (UCNPs) and tetramethylrhodamine. To circumvent the problems of low luminous efficiency of FRET and low sensitivity of sensor, the upconversion nanoparticles with very strong fluorescence efficiency were prepared and quantitatively modified. Results showed that the concentrations of amino groups and streptavidin were 43 nmol/mg and 6.12 µg/mg on the surface of the UCNPs, respectively. Under the optimal detection conditions, the peak intensity of UCNPs at 547 nm was linear with the logarithm of the BPA concentration with the detection limit of 0.05 ng/mL. Without complicated pre-processing, the recoveries were in general between 91.0 and 115.0% in tap water, river water, and disposable paper cup water. Therefore, the proposed sensor is suitable for effective sensing of trace BPA in water samples. Graphical abstract ᅟ.

Upconversion fluorescent aptasensor for bisphenol A and 17ß-estradiol based on a nanohybrid composed of black phosphorus and gold, and making use of signal amplification via DNA tetrahedrons.

This study describes an upconversion fluorescent aptasensor based on black phosphorus nanohybrids and self-assembled DNA tetrahedrons dual-amplification strategy for rapid detection of the environmental estrogens bisphenol A (BPA) and 17ß-estradiol (E2). Tetrahedron complementary DNAs (T-cDNAs) were self-assembled in an oriented fashion on a 2D nanohybrid composed of black phosphorus (BP) and gold to give a materials of architecture BP-Au@T-cDNAs. In parallel, core-shell upconversion nanoparticles were modified with aptamers (UCNPs@apts) and used as capture probes. On complementary pairing, the BP-Au@T-cDNA quench the fluorescence of UCNPs@apts (measured at an excitation wavelength 808 nm and at main emission peaks at 545 nm and 805 nm.) Compared with single-stranded probes based on black phosphorus and gold, the dual-amplification strategy increases quenching efficiency by nearly 25%-30% and reduces capture time to 10 min. This is due to the higher optical absorption of 2D nanohybrid and the reduction of steric hindrance by T-cDNAs. Exposure to BPA or E2 cause the release of UCNPs@apts from the BP-Au@T-cDNAs due to stronger binding between aptamer and analyte. Hence, fluorescence recovers at 545 nm for BPA and 805 nm for E2. Based on these findings, a dually amplified aptamer assay was constructed that covers the 0.01 to 100 ng mL-1 BPA concentration range, and the 0.1 to 100 ng mL-1 E2 concentration range. The detection limits are 7.8 pg mL-1 and 92 pg mL-1, respectively. This method was applied to the simultaneous determination of BPA and E2 in spiked samples of water, food, serum and urine. Graphical abstract Schematic presentation of novel quenching probes designed by tetrahedron complementary DNAs oriented self-assembled on the surface of black phosphorus/gold nanohybrids. Combined with aptamer-modified upconversion nanoparticles, a dual-amplification self-assembled fluorescence nanoprobe was constructed for simultaneous detection of BPA and E2.

Highly Selective, Aptamer-Based, Ultrasensitive Nanogold Colorimetric Smartphone Readout for Detection of Cd(II).

A highly selective and sensitive method for Cd(II) detection was developed based on aptamer and gold nanoparticles (AuNPs) combined with a colorimetric smartphone readout. The experimental conditions such as reaction time of polydiene dimethyl ammonium chloride (PDDA) and AuNPs, PDDA dose, time of aptamer and PDDA incubation, and aptamer concentration were optimized. Under the optimized conditions, the color and red(R) value of the solution was concentration-dependent on Cd(II). The proposed method exhibited a linear range of 1-400 ng/mL (r2 = 0.9794) with a limit of detection (LOD) of 1 ng/mL. This method had been successfully applied to test and quantify Cd(II) in water and rice samples, and the results were in full agreement with those from the atomic absorption spectrometer. Therefore, low-cost colorimetry demonstrated its potential for practical application in visual or quantitative detection with a smartphone. This approach can be readily applied to other analytes.

Metabolic reprogramming in colon cancer reversed by DHTS through regulating PTEN/AKT/HIF1α mediated signal pathway.

BACKGROUND: Metabolic reprogramming and hypoxia contribute to the resistance of conventional chemotherapeutic drugs in kinds of cancers. In this study, we investigated the effect of dihydrotanshinone I (DHTS) on reversing dysregulated metabolism of glucose and fatty acid in colon cancer and elucidated its mechanism of action. METHODS: Cell viability was determined by MTT assay. Oxidative phosphorylation, glycolysis, and mitochondrial fuel oxidation were assessed by Mito stress test, glycolysis stress test, and mito fuel flex test, respectively. Anti-cancer activity of DHTS in vivo was evaluated in Colon cancer xenograft. Hexokinase activity and free fatty acid (FFA) content were assessed using respective Commercial kits. Gene expression patterns were determined by performing DNA microarray analysis and real-time PCR. Protein expression was assessed using immunoblotting and immunohistochemistry. RESULTS: DHTS showed similar cytotoxicity against colon cancer cells under hypoxia and normoxia. DHTS decreased the efficiency of glucose and FA as mitochondrial fuels in HCT116 cells, which efficiently reversed by VO-OHpic trihydrate. DHTS reduced hexokinase activity and free fatty acid (FFA) content in tumor tissue of xenograft model of colon cancer. Gene expression patterns in metabolic pathways were dramatically differential between model and treatment group. Increases in PTEN and a substantial decrease in the expression of SIRT3, HIF1α, p-AKT, HKII, p-MTOR, RHEB, and p-ACC were detected. CONCLUSIONS: DHTS reversed metabolic reprogramming in colon cancer through PTEN/AKT/HIF1α-mediated signal pathway. GENERAL SIGNIFICANCE: The study is the first to report the reverse of metabolic reprogramming by DHTS in colon cancer. Meantime, SIRT3/PTEN/AKT/HIF1α mediated signal pathway plays a critical role during this process.

Turn-on fluorometric immunosensor for diethylstilbestrol based on the use of air-stable polydopamine-functionalized black phosphorus and upconversion nanoparticles.

The preparation of air-stable black phosphorus (BP) is challenging because atomic layers of BP degrade rapidly on exposure to oxygen. A strategy is presented for the synthesis of BP functionalized with polydopamine (PDA/BP). Dopamine was self-polymerized to yield polydopamine (PDA) which then was used to coat the surface of BP. PDA can be easily reduced and this prevents BP degradation. PDA/BP also is a viable matrix for the adsorption of proteins due to the presence of functional groups. Without any chemical activation, diethylstilbestrol (DES)-specific monoclonal antibody was adsorbed on the PDA/BP surface. PDA/BP quenches the fluorescence antigen-modified NaYF4:Yb,Ho,Nd upconversion nanoparticles (UCNPs; photoexcited at 808 nm) via specific immuno recognition. Exposure to DES causes the dissociation of UCNP from the PDA/BP surface and fluorescence at 475, 525, 545 and 660 nm to recover. This is due to the DES competition with antigen for binding to the antibody. Based on this competitive immuno mechanism, a turn-on fluorometric immunoassay was constructed. It has a response that covers the 0.1 to 1000 ng mL-1 DES concentration range with a detection limit of 83 pg mL-1. This method was successfully applied to the determination of DES in spiked food and human urine samples. Graphical abstract Air-stable polydopamine-functionalized black phosphorus was obtained by modification of black phosphorus with polydopamine and then was coupled with specific monoclonal antibody. Combined with antigen-modified upconversion nanoparticles, a turn-on fluorometric immunoassay was constructed to detect diethylstilbestrol.

Overview of nongynecological samples prepared with liquid-based cytology medium.

OBJECTIVE: Liquid-based cytology of nongynecological specimens is commonly used in cytology laboratories throughout the world and various processing methods, such as ThinPrep and SurePath, have been reported. The cytological features and performance of liquid-based cytology for various cytology specimens, including body cavity fluids, urine, brushing specimens and fine-needle aspiration of various lesions, were reviewed and compared with the experience of our laboratory and the literature published in PubMed. STUDY DESIGN: The parameters for the evaluation of liquid-based cytology and conventional smears were described in the various types of specimens. Criteria for the interpretation of nongynecological liquid-based cytology were highlighted to show differences in cell morphology, background and artifacts. RESULTS: The interpretation requires familiarity with the appearance of liquid-based cytology in the various types of preparations to avoid misdiagnosis. CONCLUSIONS: Cell blocks can be prepared with specimens preserved in a liquid-based cytology medium and immunocytochemical stains and molecular testing can be successfully performed. These are important adjuncts in order to reach a definitive diagnosis.

A comparative study of INSM1 (clone MRQ70) immunoreactivity on CytoLyt® pretreated cytology and resection specimens of pancreatic neuroendocrine tumors.

INTRODUCTION: Insulinoma-associated protein 1 (INSM1) is a newly characterized sensitive and specific immunohistochemical marker for neuroendocrine (NE) tumors. Whereas more traditional NE markers, such as chromogranin A and synaptophysin, are cytoplasmic, INSM1 is uniquely nuclear and thus could serve as a useful addition to NE tumor workup. While application of immunohistochemical studies to cytology specimens is becoming increasingly relevant, knowledge of the effects of the certain fixatives as well as the pattern and intensity of immunoexpression are important considerations. METHODS: Sixteen cases of pancreatic neuroendocrine tumor (PanNET) diagnosed between 2015 and 2021 underwent both fine-needle aspiration, which was subsequently prepared in CytoLyt®-fixed cytology cell block (CCB), and surgical resection, in which specimens were prepared into formalin-fixed paraffin embedded blocks (FFPE). For all samples, INSM1 immunoreactivity was classified according to staining intensity and extent, then compared between CCBs and matched FFPEs. RESULTS: All 16 FFPE specimens demonstrated strong and diffuse INSM1 immunoreactivity, while only 10/16 (62.5%) CCBs were positive. Of those 10, only 2/10 (20%) demonstrated strong and diffuse reactivity. CONCLUSION: The choice of fixative has a demonstrable effect on the immunoreactivity of INSM1 in PanNET. Even though the sensitivity is lower in CytoLyt®-fixed cell block specimens, the addition of INSM1 is useful, especially in challenging cases that may be negative for one or more of the traditional NE markers.

Carboxyl-functionalized two-dimensional MXene-Au nanocomposites were prepared as SERS substrates for the detection of melamine in dairy products.

In the present study, we address the limitations of conventional surface-enhanced Raman scattering (SERS) techniques for sensitive and stable detection of melamine in food products, especially dairy. To overcome these challenges, we developed a novel SERS-active substrate by incorporating gold nanoparticles (AuNPs) onto carboxyl-functionalized two-dimensional (2D) MXene material doped with nitrides, specifically Au-Ti2N-COOH. Our strategy leverages the unique physicochemical properties of MXene, a class of atomically thin, 2D transition metal carbides/nitrides, with tunable surface functionalities. By modifying the MXene surface with AuNPs and introducing carboxyl groups (-COOH), we successfully enhanced the interaction between the substrate and melamine molecules. The carboxyl groups form hydrogen bonds with the amino groups on the melamine's triazine ring, facilitating the adsorption of melamine molecules within the 'hotspot' regions responsible for SERS signal amplification. A series of characterization methods were used to confirm the successful synthesis of Au-Ti2N-COOH composites.Using Au-Ti2N-COOH as the SERS substrate, we detected melamine in spiked dairy product samples with significantly enhanced sensitivity and stability compared to nitride-doped MXene alone. The detection limit in liquid milk stands at 3.7008 µg kg-1, with spike recovery rates ranging from 99.84% to 107.55% and an approximate RSD of 5%. This work demonstrates the effectiveness of our approach in designing a label-free, rapid, and robust SERS platform for the accurate quantitation of melamine contamination in food, thereby mitigating health risks associated with melamine adulteration.