A novel copper (II) complex activated both extrinsic and intrinsic apoptotic pathways in liver cancerous cells.

Recent advances have put fundamental focus on the application of copper (II) (Cu [II]) complexes as agents for fighting against cancer. To determine whether [Cu(L)(2imi)] complex as a novel Cu complex can induce apoptosis in HepG2 as cancerous cells and L929 as normal cells via extrinsic or intrinsic apoptotic pathways, both cell lines were treated for 24 and 48 hours at IC50 concentrations of [Cu(L)(2imi)] complex. Then, the expression of some apoptosis-related genes including p53, caspase-8, bcl-2, and bax were assayed by real-time polymerase chain reaction. The [Cu(L)(2imi)] complex seems to inhibit the expression of bcl-2 in complex-treated HepG2 cancerous cells following the 24- and 48-hour treatment. The complex upregulated the p53, bax, and caspase-8 genes, therefore treatment of HepG2 cancerous cells with [Cu(L)(2imi)] complex induces programmed cell death via the upregulation of relative bax/bcl-2 ratio. Finally, this copper complex triggered apoptosis in HepG2 cells via both intrinsic and extrinsic pathway, whereas treatment of normal L929 cells with this complex induce apoptosis only via intrinsic pathway with the upregulation of relative bax/bcl-2 ratio and does not affect the expression level of caspase-8 gene and does not trigger the extrinsic pathway. Finally, these results obtained from present study confirm the role of a novel Cu complex on the induction of apoptosis process in HepG2 and L929 cells by overexpression of bax, inhibition of bcl-2 and increase of the relative bax/bcl-2 ratio. These results support that the [Cu(L)(2imi)] complex is able to induce apoptosis in cancerous cells, therefore, it has a potential for development as a novel anticancer drug.

The cytotoxicity effects of a novel Cu complex on MCF-7 human breast cancerous cells.

A variety of biological activities, such as anti-microbial and anti-tumor properties was reported for 1,10-phenanthroline and its copper complexes. In this study, the anti-proliferative activity of a novel  [Cu(L)(phen)] complex was investigated on MCF-7 breast cancer cells using MTT assay. Since chemotherapy is lake of ability to distinguish between normal cells from cancerous cells, therefore we also investigated the effect of  [Cu(L)(phen)] complex on normal L929 cells. The results showed that following 24 and 48 h exposure of cells with  [Cu(L)(phen)] complex, the IC50 values for MCF-7 were significantly lower than that recorded for L929 and normal cells were less sensitive than cancerous cells to the complex. Additionally, the  [Cu(L)(phen)] complex displayed a time- and concentration-dependent cytotoxic response, with MCF-7 and L929 cells. Also flow cytometry findings suggest that  [Cu(L)(phen)] complex is capable of decreasing cancer cell viability through apoptosis and did not efficiently activate the necrosis process.

Optimising oral cancer reconstruction: a retrospective cohort study on the modified radial forearm free flap technique to eliminate the need for a secondary donor site.

The radial forearm free flap (RFFF) is commonly used in the reconstruction of oral cancer patients. Traditional RFFF (TRFFF) techniques, which often require a secondary donor site to repair the forearm defect, may result in a scar extending to the dorsal hand. This can lead to significant functional and aesthetic concerns in the forearm. We designed a modified RFFF (MRFFF) that incorporates a glasses-shaped flap and features deep venous drainage. To evaluate its effectiveness we conducted a retrospective chart review of 105 patients with oral squamous cell carcinoma who underwent reconstructive surgery between 2018 and 2022. These patients were treated either with a TRFFF (n = 60) or the newly developed MRFFF (n = 45). Our inclusion criteria, guided by preliminary surgical experience prior to initiating the study, stipulated that single oral defects should be no larger than 6 × 6 cm2, and adjacent double defects no larger than 3 × 6 cm2. Flap size, pedicle length, harvesting duration, and anastomosis during the surgical procedure were compared between the two techniques. Preoperative and postoperative oral function, recurrence, mortality, and dorsal scarring were recorded. One-week, one-month, and six-month postoperative subjective aesthetics assessments, and self-reported postoperative donor hand function, were measured using the Michigan hand questionnaire (MHQ). There were no significant differences between the groups in terms of flap size, pedicle length, harvesting time, anastomosis time, postoperative oral function, recurrence, and mortality. However, patients with a MRFFF did not require a second donor graft site and did not have scars extending to the dorsal forearm. They also had significantly improved postoperative aesthetic outcomes (1 week: 70.6%, 1 month: 62.2%) and donor hand function (1 week: 54.6%, 1 month: 40.4%) compared with the TRFFF group (p < 0.001). The MRFFF eliminates the need for secondary donor sites and improves primary donor site outcomes. It is versatile and can be employed for either single or composite oral defects. Through extensive case studies, we have defined its specific scope: it is suitable for single defects measuring no more than 6 × 6 cm2, or for composite defects no larger than 3 × 6 cm2. Furthermore, it does not compromise the functional recovery of the recipient site, and should be widely adopted for all qualifying patients.

Whey protein-loaded 3D-printed poly (lactic) acid scaffolds for wound dressing applications.

Chronic skin wounds pose a global clinical challenge, necessitating effective treatment strategies. This study explores the potential of 3D printed Poly Lactic Acid (PLA) scaffolds, enhanced with Whey Protein Concentrate (WPC) at varying concentrations (25, 35, and 50% wt), for wound healing applications. PLA's biocompatibility, biodegradability, and thermal stability make it an ideal material for medical applications. The addition of WPC aims to mimic the skin's extracellular matrix and enhance the bioactivity of the PLA scaffolds. Fourier Transform Infrared Spectroscopy results confirmed the successful loading of WPC into the 3D printed PLA-based scaffolds. Scanning Electron Microscopy (SEM) images revealed no significant differences in pore size between PLA/WPC scaffolds and pure PLA scaffolds. Mechanical strength tests showed similar tensile strength between pure PLA and PLA with 50% WPC scaffolds. However, scaffolds with lower WPC concentrations displayed reduced tensile strength. Notably, all PLA/WPC scaffolds exhibited increased strain at break compared to pure PLA. Swelling capacity was highest in PLA with 25% WPC, approximately 130% higher than pure PLA. Scaffolds with higher WPC concentrations also showed increased swelling and degradation rates. Drug release was found to be prolonged with increasing WPC concentration. After seven days of incubation, cell viability significantly increased in PLA with 50% WPC scaffolds compared to pure PLA scaffolds. This innovative approach could pave the way for personalized wound care strategies, offering tailored treatments and targeted drug delivery. However, further studies are needed to optimize the properties of these scaffolds and validate their effectiveness in clinical settings.

Therapeutic Potential of Resveratrol and Atorvastatin Following High-Fat Diet Uptake-Induced Nonalcoholic Fatty Liver Disease by Targeting Genes Involved in Cholesterol Metabolism and miR33.

The present study was designed to evaluate the effects of resveratrol, atorvastatin, and a combination of resveratrol and atorvastatin on expression levels of genes involved in the cholesterol metabolic pathway in the fatty liver of C57/BL6 mice. A high-fat diet was used to induce fatty liver in C57/BL6 mice treated with resveratrol, atorvastatin, or a combination of resveratrol and atorvastatin. Pathological and biochemical studies were performed. In addition, hepatic gene expressions of ATP-binding cassette transporter A1 (ABCA1), ABCG1, liver X receptor (LXR)α, scavenger receptor B1 (SR-B1), low-density lipoprotein receptor (LDLR), and miR33 were evaluated by the real-time PCR method, and the Western blot method was used to measure the ABCA1, ABCG1, and LXRα protein levels. Resveratrol and atorvastatin reduced fat accumulation in the liver of mice with fatty liver, and this effect was correlated with decreased blood glucose levels, triglyceride, cholesterol, low-density lipoprotein cholesterol, high-density lipoprotein cholesterol blood levels compared with the positive control (PC) group. In contrast to the animals of the PC group, fatty liver groups that received resveratrol and atorvastatin had a significant effect on the mRNA levels of the ABCA1, ABCG1, LXRα, SR-B1, LDLR, and miR33 genes. Moreover, resveratrol and atorvastatin administration elevated ABCA1 and ABCG1 and reduced LXRα protein expression. Obtained results showed that resveratrol and atorvastatin combination therapy can improve nonalcoholic fatty liver disease by targeting genes involved in cholesterol metabolism and miR33.

Hypoxia mimetics restore bone biomineralisation in hyperglycaemic environments.

Diabetic patients have an increased risk of fracture and an increased occurrence of impaired fracture healing. Diabetic and hyperglycaemic conditions have been shown to impair the cellular response to hypoxia, via an inhibited hypoxia inducible factor (HIF)-1α pathway. We investigated, using an in vitro hyperglycaemia bone tissue engineering model (and a multidisciplinary bone characterisation approach), the differing effects of glucose levels, hypoxia and chemicals known to stabilise HIF-1α (CoCl2 and DMOG) on bone formation. Hypoxia (1% O2) inhibited bone nodule formation and resulted in discrete biomineralisation as opposed to the mineralised extracellular collagen fibres found in normoxia (20% O2). Unlike hypoxia, the use of hypoxia mimetics did not prevent nodule formation in normal glucose level. Hyperglycaemic conditions (25 mM and 50 mM glucose) inhibited biomineralisation. Interestingly, both hypoxia mimetics (CoCl2 and DMOG) partly restored hyperglycaemia inhibited bone nodule formation. These results highlight the difference in osteoblast responses between hypoxia mimetics and actual hypoxia and suggests a role of HIF-1α stabilisation in bone biomineralisation that extends that of promoting neovascularisation, or other system effects associated with hypoxia and bone regeneration in vivo. This study demonstrates that targeting the HIF pathway may represent a promising strategy for bone regeneration in diabetic patients.

Bioengineering the ameloblastoma tumour to study its effect on bone nodule formation.

Ameloblastoma is a benign, epithelial cancer of the jawbone, which causes bone resorption and disfigurement to patients affected. The interaction of ameloblastoma with its tumour stroma drives invasion and progression. We used stiff collagen matrices to engineer active bone forming stroma, to probe the interaction of ameloblastoma with its native tumour bone microenvironment. This bone-stroma was assessed by nano-CT, transmission electron microscopy (TEM), Raman spectroscopy and gene analysis. Furthermore, we investigated gene correlation between bone forming 3D bone stroma and ameloblastoma introduced 3D bone stroma. Ameloblastoma cells increased expression of MMP-2 and -9 and RANK temporally in 3D compared to 2D. Our 3D biomimetic model formed bone nodules of an average surface area of 0.1 mm2 and average height of 92.37 [Formula: see text] 7.96 µm over 21 days. We demonstrate a woven bone phenotype with distinct mineral and matrix components and increased expression of bone formation genes in our engineered bone. Introducing ameloblastoma to the bone stroma, completely inhibited bone formation, in a spatially specific manner. Multivariate gene analysis showed that ameloblastoma cells downregulate bone formation genes such as RUNX2. Through the development of a comprehensive bone stroma, we show that an ameloblastoma tumour mass prevents osteoblasts from forming new bone nodules and severely restricted the growth of existing bone nodules. We have identified potential pathways for this inhibition. More critically, we present novel findings on the interaction of stromal osteoblasts with ameloblastoma.

Effect of a Copper (II) Complex on The Induction of Apoptosis in Human Hepatocellular Carcinoma Cells

Objectives: In the present study, we aimed to identify the anti-proliferative potential of [Cu(L)(2imi)] complex [L = 2-(((5-chloro-2-oxyphenyl)imino)methyl)phenolato) and 2imi = 2-methyl imidazole] against HepG2 cells as an in vitro model of human hepatocellular carcinoma and normal mouse fibroblast L929 cells. Methods: The cytotoxic and apoptotic effects of [Cu(L)(2imi)] complex on HepG2 cells and normal fibroblasts (L929) were examined by MTT assay and flow cytometry, respectively. Results: Cytotoxicity induced by [Cu(L)(2imi)] complex was time dependent. Also, there was a positive correlation between cytotoxicity and an increase in Cu complex concentration. For HepG2 cells, the cell viability percentage was 50% at 58 µg/mL after 24 h treatment, whereas in the same concentration and conditions, the viability percentage was surprisingly higher (about 100%) for L929 cells. Also, after 48 h treatment, the viability percentage of HepG2 cells at 55 µg/mL concentration was 50% in contrast with 89.3% for L929 cells in the same conditions. Flow cytometry findings suggest that [Cu(L)(2imi)] complex is capable of decreasing cancer cell viability through apoptosis and did not efficiently activate the necrosis process. Conclusions: Finally, we found that [Cu(L)(2imi)] complex possess the potential for development as an anti-cancer drug for human hepatocellular carcinoma.

Biosynthesis of gold nanoparticles by two bacterial and fungal strains, Bacillus cereus and Fusarium oxysporum, and assessment and comparison of their nanotoxicity in vitro by direct and indirect assays

Background: Although nanoparticles (NPs) have many advantages, it has been proved that they may be absorbed by and have toxic effects on the human body. Recent research has tried to evaluate and compare the nanotoxicity of gold nanoparticles (AuNPs) produced by two types of microorganisms in vitro by two different methods. AuNPs were produced by Bacillus cereus and Fusarium oxysporum, and their production was confirmed by visible spectral, transmission electron microscope, and X-ray diffraction (XRD) analyses. The human fibroblast cell line CIRC-HLF was treated with AuNPs, and the induced nanotoxicity was measured using direct microscopic and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays. Results: The results showed that the produced AuNPs had a maximum absorbance peak around 510­530 nanometer (nm), with spherical, hexagonal, and octagonal shapes and average sizes around 20­50 nm. The XRD results confirmed the presence of GNPs in the microbial culture supernatants. An MTT assay showed that GNPs had dose-dependent toxic effects, and microscopic analysis showed that GNPs induced cell abnormalities in doses lower than the determined half-maximal inhibitory concentrations (IC50s). Conclusions: In conclusion, the biologically produced AuNPs had toxic effects in the cell culture, and direct techniques such as microscopic evaluation instead of indirect methods such as MTT assay were more useful for assessing the nanotoxicity of the biologically produced AuNPs. Thus, the use of only MTT assay for nanotoxicity evaluation of AuNPs is not desirable.