Design and Validation of Primer Sets for the Detection and Quantification of Antibiotic Resistance Genes in Environmental Samples by Quantitative PCR.

The high prevalence of antibiotic resistant bacteria (ARB) in several environments is a great concern threatening human health. Particularly, wastewater treatment plants (WWTP) become important contributors to the dissemination of ARB to receiving water bodies, due to the inefficient management or treatment of highly antibiotic-concentrated wastewaters. Hence, it is vital to develop molecular tools that allow proper monitoring of the genes encoding resistances to these important therapeutic compounds (antibiotic resistant genes, ARGs). For an accurate quantification of ARGs, there is a need for sensitive and robust qPCR assays supported by a good design of primers and validated protocols. In this study, eleven relevant ARGs were selected as targets, including aadA and aadB (conferring resistance to aminoglycosides); ampC, blaTEM, blaSHV, and mecA (resistance to beta-lactams); dfrA1 (resistance to trimethoprim); ermB (resistance to macrolides); fosA (resistance to fosfomycin); qnrS (resistance to quinolones); and tetA(A) (resistance to tetracyclines). The in silico design of the new primer sets was performed based on the alignment of all the sequences of the target ARGs (orthology grade > 70%) deposited in the Kyoto Encyclopedia of Genes and Genomes (KEGG) database, allowing higher coverages of the ARGs' biodiversity than those of several primers described to date. The adequate design and performance of the new molecular tools were validated in six samples, retrieved from both natural and engineered environments related to wastewater treatment. The hallmarks of the optimized qPCR assays were high amplification efficiency (> 90%), good linearity of the standard curve (R2 > 0.980), repeatability and reproducibility across experiments, and a wide linear dynamic range. The new primer sets and methodology described here are valuable tools to upgrade the monitorization of the abundance and emergence of the targeted ARGs by qPCR in WWTPs and related environments.

Linking the shifts in the metabolically active microbiota in a UASB and hybrid anaerobic-aerobic bioreactor for swine wastewater treatment.

Due to the high concentration of pollutants, swine wastewater needs to be treated prior to disposal. The combination of anaerobic and aerobic technologies in one hybrid system allows to obtain higher removal efficiencies compared to those achieved via conventional biological treatment, and the performance of a hybrid system depends on the microbial community in the bioreactor. Here, we evaluated the community assembly of an anaerobic-aerobic hybrid reactor for swine wastewater treatment. Sequencing of partial 16S rRNA coding genes was performed using Illumina from DNA and retrotranscribed RNA templates (cDNA) extracted from samples from both sections of the hybrid system and from a UASB bioreactor fed with the same swine wastewater influent. Proteobacteria and Firmicutes were the dominant phyla and play a key role in anaerobic fermentation, followed by Methanosaeta and Methanobacterium. Several differences were found in the relative abundances of some genera between the DNA and cDNA samples, indicating an increase in the diversity of the metabolically active community, highlighting Chlorobaculum, Cladimonas, Turicibacter and Clostridium senso stricto. Nitrifying bacteria were more abundant in the hybrid bioreactor. Beta diversity analysis revealed that the microbial community structure significantly differed among the samples (p < 0.05) and between both anaerobic treatments. The main predicted metabolic pathways were the biosynthesis of amino acids and the formation of antibiotics. Also, the metabolism of C5-branched dibasic acid, Vit B5 and CoA, exhibited an important relationship with the main nitrogen-removing microorganisms. The anaerobic-aerobic hybrid bioreactor showed a higher ammonia removal rate compared to the conventional UASB system. However, further research and adjustments are needed to completely remove nitrogen from wastewater.

Simplified engineering design towards a competitive lipid-rich effluents valorization.

Medium- and long-chain fatty acids and glycerol contained in the oily fraction of many food-industry effluents are excellent candidates to produce biobased high-value triacylglycerides (TAGs) and polyhydroxyalkanoates (PHAs). The typical process configuration for TAGs recovery from lipid-rich streams always includes two steps (culture enrichment plus storage compounds accumulation) whereas, for PHAs production, an additional pretreatment of the substrate for the obtainment of soluble volatile fatty acids (VFAs) is required. To simplify the process, substrate hydrolysis, culture enrichment, and accumulation (TAG and PHA storage) were coupled here in a single sequencing batch reactor (SBR) operated under the double growth limitation strategy (DGL) and fed in pulses with industrial waste fish oil during the whole feast phase. When the SBR was operated in 12 h cycles, it was reached up to 51 wt % biopolymers after only 6 h of feast (TAG:PHA ratio of 50:51; 0.423 CmmolBIOP/CmmolS). Daily storage compound production was observed to be over 25% higher than the reached when enrichment and accumulation stages were carried in separate operational units. Increasing the feast phase length from 6 to 12 h (18 h cycle) negatively affected the DGL strategy performance and hence system storage capacity, which was recovered after also extending the famine phase in the same proportion (24 h cycle). Besides, the carbon influx during the feast phase was identified as a key operational parameter controlling storage compounds production and, together with the C/N ratio, culture selection. The different cycle configurations tested clearly modulated the total fungal abundances without no significant differences in the size of the bacterial populations. Several PHA and TAG producers were found in the mixed culture although the PHA and TAG productions were poorly associated with the increased relative abundances (RAs) of specific operational taxonomic units (OTUs).

Salinity is the major driver of the global eukaryotic community structure in fish-canning wastewater treatment plants.

Fish-canning wastewater is characterized frequently by a high content of salt (NaCl), making its treatment particularly difficult; however, the knowledge of the effect of NaCl on eukaryotic communities is very limited. In the present study, the global diversity of eukaryotes in activated sludges (AS) from 4 different wastewater treatment plants (WWTPs) treating fish-canning effluents varying in salinity (0.47, 1.36, 1.72 and 12.76 g NaCl/L) was determined by sequencing partial 18S rRNA genes using Illumina MiSeq. A greater diversity than previously reported was observed in the AS community, which comprised 37 and 330 phylum-like and genera-like groups, respectively. In this sense, the more abundant genus-like groups (average relative abundance (RA) > 5%) were Adineta (6.80%), Lecane (16.80%), Dictyostelium (7.36%), Unclassified_Fungi7 (6.94%), Procryptobia (5.13) and Oocystis (5.07%). The eukaryotic communities shared a common core of 25 phylum-like clades (95% of total sequences); therefore, a narrow selection of the eukaryotic populations was found, despite the differences in the abiotic characteristics of fish-canning effluents and reactor operational conditions inflicted. The differences in NaCl concentration were the main factor that influenced the structure of the eukaryotic community, modulating the RAs of the different phylum-like clades of the common core. Higher levels of salt increased the RAs of Ascomycota, Chlorophyta, Choanoflagellata, Cryptophyta, Mollusca, Nematoda, Other Protists and Unclassified Fungi. Among the different eukaryotic genera here found, the RA of Oocystis (Chlorophyta) was intimately correlated to increasing NaCl concentrations and it is proposed as a bioindicator of the global eukaryotic community of fish-canning WWTPs.

Impact of solar radiation exposure on phyllosphere bacterial community of red-pigmented baby leaf lettuce.

Solar radiation has been identified as a stress factor affecting phyllosphere associated bacteria colonization and survival during primary production. In the present study, the impact of different solar radiation doses on the phyllosphere microbiota of red-pigmented baby leaf lettuce cultivated in open field under commercial conditions was evaluated. Four weeks before harvest, the growing field was divided into four plots; each one was consecutively covered with one-week-interval with a light-excluding plastic to reduce the sunlight exposure. Four different solar radiation treatments were generated and cumulative photosynthetically active radiation (PAR) was used to differentiate treatments as follows: 4889 ± 428 µmol/m2/s (uncovered), 4265 ± 356 µmol/m2/s (covered for 1 week), 3602 ± 225 µmol/m2/s (covered for 2 weeks) and 3115 ± 313 µmol/m2/s (covered for 3 weeks). The size and composition of the phyllosphere bacterial community were determined by cultivation-depended (plate count) and independent (qPCR) techniques. Exposure to decreased levels of cumulative PAR did not produce significant differences in total bacterial community size, regardless of the chosen quantification techniques. However, total bacteria size quantified by qPCR was around 3.5 orders of magnitude higher than those obtained by plate count. The observed differences between cultivation-depended and independent techniques could be attributed to the presence of non-viable or viable but non-culturable (VBNC) bacteria. The bacterial community structure was analyzed using temperature gradient gel electrophoresis (TGGE), and significant differences were detected when the four solar treatment were compared. A qPCR approach was applied to the quantification of specific bacterial phyla and classes, previously identified in the phyllosphere of plants available literature, confirming that Proteobacteria, Bacteroidetes, Actinobacterias and Firmicutes were the most abundantly represented phyla in lettuce. Treatment comparison revealed higher proportions of Gammaproteobacteria as opposed to the Betaproteobacteria on the lettuce exposed to the lowest cumulative PAR dose (3115 ± 313 µmol/m2/s). The obtained results demonstrated that the solar radiation is a relevant environmental factor influencing the relative abundance of specific-groups of phyllosphere-associated bacteria in pigmented baby leaf lettuce.

Archaeal diversity in biofilm technologies applied to treat urban and industrial wastewater: recent advances and future prospects.

Biological wastewater treatment (WWT) frequently relies on biofilms for the removal of anthropogenic contaminants. The use of inert carrier materials to support biofilm development is often required, although under certain operating conditions microorganisms yield structures called granules, dense aggregates of self-immobilized cells with the characteristics of biofilms maintained in suspension. Molecular techniques have been successfully applied in recent years to identify the prokaryotic communities inhabiting biofilms in WWT plants. Although methanogenic Archaea are widely acknowledged as key players for the degradation of organic matter in anaerobic bioreactors, other biotechnological functions fulfilled by Archaea are less explored, and research on their significance and potential for WWT is largely needed. In addition, the occurrence of biofilms in WWT plants can sometimes be a source of operational problems. This is the case for membrane bioreactors (MBR), an advanced technology that combines conventional biological treatment with membrane filtration, which is strongly limited by biofouling, defined as the undesirable accumulation of microbial biofilms and other materials on membrane surfaces. The prevalence and spatial distribution of archaeal communities in biofilm-based WWT as well as their role in biofouling are reviewed here, in order to illustrate the significance of this prokaryotic cellular lineage in engineered environments devoted to WWT.

Comparative analysis of the enzyme activities and the bacterial community structure based on the aeration source supplied to an MBR to treat urban wastewater.

A comparative analysis was performed in a pilot-scale membrane bioreactor (MBR) treating urban wastewater supplied with either pure oxygen (O2) or air, to assess the influence of each aeration source on the diversity and activity of the bacterial communities in the sludge. The MBR was operated in three experimental stages with different concentrations of volatile suspended solids (VSS) and temperature, and under both aeration conditions. α-Glucosidases, proteases, esterases and phosphatases were tested as markers of organic matter removal in the sludge, and the diversity of the bacterial community was analysed by fingerprinting (temperature-gradient gel electrophoresis of partially-amplified 16S-rRNA genes). Redundancy analysis (RDA) revealed that temperature and VSS concentration were the only factors that significantly influenced the levels of enzyme activities and the values of both the Shannon-Wiener diversity index (H') and the functional organisation index (Fo), while the bacterial community structure experienced significant changes depending on the aeration source supplied in each experimental stage.

Dynamics of PHA-Accumulating Bacterial Communities Fed with Lipid-Rich Liquid Effluents from Fish-Canning Industries.

The biosynthesis of polyhydroxyalkanoates (PHAs) from industrial wastes by mixed microbial cultures (MMCs) enriched in PHA-accumulating bacteria is a promising technology to replace petroleum-based plastics. However, the populations' dynamics in the PHA-accumulating MMCs are not well known. Therefore, the main objective of this study was to address the shifts in the size and structure of the bacterial communities in two lab-scale sequencing batch reactors (SBRs) fed with fish-canning effluents and operated under non-saline (SBR-N, 0.5 g NaCl/L) or saline (SBR-S, 10 g NaCl/L) conditions, by using a combination of quantitative PCR and Illumina sequencing of bacterial 16S rRNA genes. A double growth limitation (DGL) strategy, in which nitrogen availability was limited and uncoupled to carbon addition, strongly modulated the relative abundances of the PHA-accumulating bacteria, leading to an increase in the accumulation of PHAs, independently of the saline conditions (average 9.04 wt% and 11.69 wt%, maximum yields 22.03 wt% and 26.33% SBR-N and SBR-S, respectively). On the other hand, no correlations were found among the PHAs accumulation yields and the absolute abundances of total Bacteria, which decreased through time in the SBR-N and did not present statistical differences in the SBR-S. Acinetobacter, Calothrix, Dyella, Flavobacterium, Novosphingobium, Qipengyuania, and Tsukamurella were key PHA-accumulating genera in both SBRs under the DGL strategy, which was revealed as a successful tool to obtain a PHA-enriched MMC using fish-canning effluents.

Structure of fungal communities in sequencing batch reactors operated at different salinities for the selection of triacylglyceride-producers from a fish-canning lipid-rich waste stream.

Oleaginous fungi natively accumulate large amounts of triacylglycerides (TAG), widely used as precursors for sustainable biodiesel production. However, little attention has been paid to the diversity and roles of fungal mixed microbial cultures (MMCs) in sequencing batch reactors (SBR). In this study, a lipid-rich stream produced in the fish-canning industry was used as a substrate in two laboratory-scale SBRs operated under the feast/famine (F/F) regime to enrich microorganisms with high TAG-storage ability, under two different concentrations of NaCl (SBR-N: 0.5 g/L; SBR-S: 10 g/L). The size of the fungal community in the enriched activated sludge (EAS) was analyzed using 18S rRNA-based qPCR, and the fungal community structure was determined by Illumina sequencing. The different selective pressures (feeding strategy and control of pH) implemented in the enrichment SBRs throughout operation increased the abundance of total fungi. In general, there was an enrichment of genera previously identified as TAG-accumulating fungi (Apiotrichum, Candida, Cutaneotrichosporon, Geotrichum, Haglerozyma, Metarhizium, Mortierella, Saccharomycopsis, and Yarrowia) in both SBRs. However, the observed increase of their relative abundances throughout operation was not significantly linked to a higher TAG accumulation.

Metabolic characterization of a strain (BM90) of Delftia tsuruhatensis showing highly diversified capacity to degrade low molecular weight phenols.

A novel bacterium, strain BM90, previously isolated from Tyrrhenian Sea, was metabolically characterized testing its ability to use 95 different carbon sources by the Biolog system. The bacterium showed a broad capacity to use fatty-, organic- and amino-acids; on the contrary, its ability to use carbohydrates was extremely scarce. Strain BM90 was identified and affiliated to Delftia tsuruhatensis by molecular techniques based on 16S rRNA gene sequencing. D. tsuruhatensis BM90, cultivated in shaken cultures, was able to grow on various phenolic compounds and to remove them from its cultural broth. The phenols used, chosen for their presence in industrial or agro-industrial effluents, were grouped on the base of their chemical characteristics. These included benzoic acid derivatives, cinnamic acid derivatives, phenolic aldehyde derivatives, acetic acid derivatives and other phenolic compounds such as catechol and p-hydroxyphenylpropionic acid. When all the compounds (24) were gathered in the same medium (total concentration: 500 mg/l), BM90 caused the complete depletion of 18 phenols and the partial removal of two others. Only four phenolic compounds were not removed. Flow cytometry studies were carried out to understand the physiological state of BM90 cells in presence of the above phenols in various conditions. At the concentrations tested, a certain toxic effect was exerted only by the four compounds that were not metabolized by the bacterium.

Evaluation of the Abundance of Fungi in Wastewater Treatment Plants Using Quantitative PCR (qPCR).

Assessment of the abundance of fungi in environmental samples by quantitative PCR (qPCR) of community DNA is often a difficult task due to biases introduced during PCR amplification, resulting from the differences associated with length polymorphism and the varying number of copies of the rRNA operon among fungal species, the lack of specificity of the primers targeting the different regions of the rRNA operon, or their insufficient coverage of the fungal lineages. To overcome those limitations, it is crucial to test and select the specific primers sets which provide the more accurate approximation to the quantification of the targeted fungal populations in a given set of samples. Fungi are a significant fraction of the microbiota in wastewater treatment plants (WWTPs), but the activated sludge microbial communities comprise many other eukaryotic microorganisms whose molecular markers are often coamplified by primers initially designed as fungal-specific. Here, the use of the FungiQuant primer set is recommended for the quantification of fungal molecular markers (18S rRNA genes) by qPCR in activated sludge samples and the full protocol is described.

Production of chitinolytic enzymes by a strain (BM17) of Paenibacillus pabuli isolated from crab shells samples collected in the east sector of central Tyrrhenian Sea.

Nineteen bacterial isolates were grown in shaken cultures in media containing chitin as carbon source and different additional nitrogen sources such as yeast nitrogen base (YNB), yeast extract (YE), corn steep liquor (CSL) and ammonium sulfate. Strain BM17 showed the highest activity (200 U/l) in medium containing Chitin (1%) and YNB (0.5%). Molecular analysis of the 16S rRNA gene showed that strain BM17 belongs to the species Paenibacillus pabuli (99.72% homology). The enzyme activity started after 12-24 h; exponential enzyme production was recorded from the 24th h and lasted till the 96th h of incubation when activity peaked to decrease thereafter. Medium optimisation was carried out by Response Surface Methodology (RSM) considering the effects of chitin, corn steep liquor and yeast extract. BM17 chitinolytic activity was induced by chitin but the increase of its concentration did not have significant effects on the enzyme activity. By contrast, the nitrogen source, particularly YE, strongly affected the enzyme production.

Removal of organic load from olive washing water by an aerated submerged biofilter and profiling of the bacterial community involved in the process.

The present work aims to use a biofilter technology (aerated submerged filters) for the aerobic transformation at laboratory-scale of olive washing water (OWW) generated in the first steps of olive oil processing, as well as the genetic profiling and identification to the species level of the bacteria involved in the formation of the biofilm, by means of TGGE. Chemical parameters, such as biological oxygen demand at five days (BOD5) and chemical oxygen demand (COD), decreased markedly (up to 90 and 85%, respectively) by the biological treatment, and the efficiency of the process was significantly affected by aeration and inlet flow rates. The total polyphenol content of inlet OWW was only moderately reduced (around 50% decrease of the inlet content) after the biofilter treatment, under the conditions tested. Partial 16S rRNA genes were amplified using total DNA extracted from the biofilm and separated by TGGE. Sequences of isolated bands were mostly affiliated to the alpha-subclass of Proteobacteria, and often branched in the periphery of bacterial genera commonly present in soil (Rhizobium, Reichenowia, Agrobacterium, and Sphingomonas). The data obtained by the experimentation at laboratory scale provided results that support the suitability of the submerged filter technology for the treatment of olive washing waters with the purpose of its reutilization.

454-Pyrosequencing Analysis of Bacterial Communities from Autotrophic Nitrogen Removal Bioreactors Utilizing Universal Primers: Effect of Annealing Temperature.

Identification of anaerobic ammonium oxidizing (anammox) bacteria by molecular tools aimed at the evaluation of bacterial diversity in autotrophic nitrogen removal systems is limited by the difficulty to design universal primers for the Bacteria domain able to amplify the anammox 16S rRNA genes. A metagenomic analysis (pyrosequencing) of total bacterial diversity including anammox population in five autotrophic nitrogen removal technologies, two bench-scale models (MBR and Low Temperature CANON) and three full-scale bioreactors (anammox, CANON, and DEMON), was successfully carried out by optimization of primer selection and PCR conditions (annealing temperature). The universal primer 530F was identified as the best candidate for total bacteria and anammox bacteria diversity coverage. Salt-adjusted optimum annealing temperature of primer 530F was calculated (47°C) and hence a range of annealing temperatures of 44-49°C was tested. Pyrosequencing data showed that annealing temperature of 45°C yielded the best results in terms of species richness and diversity for all bioreactors analyzed.

Growth and nitrite and nitrous oxide accumulation of Paracoccus denitrificans ATCC 19367 in the presence of selected pesticides.

The effects of the application of eight pesticides (aldrin, lindane, dimetoate, methylparathion, methidation, atrazine, simazine, and captan) on growth, respiratory activity (as CO2 production), denitrifying activity (as N2O released), and nitrite accumulation in the culture medium by Paracoccus denitrificans strain ATCC 19367 were studied. The fungicide captan totally inhibited growth and biological activity of P. denitrificans, while the rest of the tested pesticides delayed the growth and CO2 release of P. denitrificans but did not drastically affect the bacterial growth or respiratory capacity after 96 h of culture. The denitrifying activity of P. denitrificans ATCC 19367 (as N2O released) was negatively affected by all tested pesticides. The release of N2O was strongly inhibited by several organochlorinated and organophosphorated insecticides (aldrin, lindane, dimetoate, and methidation), which led to high accumulation of nitrite in the surrounding medium. Atrazine decreased N2O release after 48 h of culture because of negative effects on growth, and methylparathion and simazine delayed the onset of N2O release by P. denitrificans. These three pesticides reduced the accumulation of NO2- compared to unamended control cultures.

Draft Genome Sequence of the Naphthalene Degrader Herbaspirillum sp. Strain RV1423.

Herbaspirillum sp. strain RV1423 was isolated from a site contaminated with alkanes and aromatic compounds and harbors the complete pathway for naphthalene degradation. The new features found in RV1423 increase considerably the versatility and the catabolic potential of a genus of bacteria previously considered mainly to be diazotrophic endophytes to plants.

Bioremediation of diesel-polluted soil using biostimulation as post-treatment after oxidation with Fenton-like reagents: assays in a pilot plant.

The present study focuses on the remediation of diesel-polluted soil using modified Fenton treatment coupled with inorganic NPK fertilizer ("Fenton+NPK"). Studies were carried out in a pilot plant containing 1 m(3) of sandy soil contaminated with 20,000 mg kg(-1) of diesel, placed outdoors at a temperature ranging between 5 and 10 °C. Results showed that NPK-fertilizer as post-treatment stimulated culturable degrading bacteria and enhanced dehydrogenase activity. Fenton+NPK treatment increased total petroleum hydrocarbon (TPH) removal efficacy. Natural attenuation removed 49% of TPH in the surface layer, 23% of TPH in the non-saturated layer and 4% of the TPH in the saturated layer, while the percentage removed of TPH after Fenton+NPK treatment was 58%, 57% and 32% respectively. The results from our study showed that, immediately after soil contamination, occurred a specialization and differentiation of the bacterial community, but after this initial modification, no significant changes of bacterial diversity was observed under natural attenuation conditions. In contrast, when the Fenton's reagent was applied a reduction of the bacterial biodiversity was observed. However, the post-biostimulation did enhance the degrading microbiota and stimulated their degrading biological activity. In conclusion, biostimulation, as a post-treatment step in chemical oxidation, is an effective solution to remediate hydrocarbon-polluted sites.

Comparative analysis of the bacterial diversity in a lab-scale moving bed biofilm reactor (MBBR) applied to treat urban wastewater under different operational conditions.

Different types of carriers were tested as support material in a lab-scale moving bed biofilm reactor (MBBR) used to treat urban wastewater under three different conditions of hydraulic retention time (HRT) and carrier filling ratios (FR). The bacterial diversity developed on the biofilms responsible of the treatment was studied using a cultivation-independent approach based on the polymerase chain reaction-temperature gradient gel electrophoresis technique (PCR-TGGE). Cluster analysis of TGGE fingerprints showed significant differences of community structure dependent upon the different operational conditions applied. Redundancy analysis (RDA) was used to determine the relationship between the operational conditions (type of carrier, HRT, FR) and bacterial biofilm diversity, demonstrating a significant effect of FR=50%. Phylogenetic analysis of PCR-reamplified and sequenced TGGE bands revealed that the prevalent Bacteria populations in the biofilm were related to Betaproteobacteria (46%), Firmicutes (34%),Alphaproteobacteria (14%) and Gammaproteobacteria (9%).

Bacterial community structure and enzyme activities in a membrane bioreactor (MBR) using pure oxygen as an aeration source.

A pilot-scale membrane bioreactor was used to treat urban wastewater using pure oxygen instead of air as a source of aeration, to study its influence on bacterial diversity and levels of enzyme activities (acid and alkaline phosphatases, glucosidase, protease, and esterase) in the sludge. The experimental work was developed in two stages influenced by seasonal temperature. Operational parameters (temperature, pH, BOD5, COD, total and volatile suspended solids) were daily monitored, and enzyme activities measured twice a week. Redundancy analysis (RDA) was used to reveal relationships between the level of enzyme activities and the variation of operational parameters, demonstrating a significant effect of temperature and volatile suspended solids. Bacterial diversity was analyzed by temperature-gradient gel electrophoresis of PCR-amplified partial 16S rRNA genes. Significant differences in community structure were observed between both stages. Sequence analysis revealed that the prevalent Bacteria populations were evolutively close to Alphaproteobacteria (44%), Betaproteobacteria (25%) and Firmicutes (17%).

Analysis of microbial communities developed on the fouling layers of a membrane-coupled anaerobic bioreactor applied to wastewater treatment.

The structure of the biofouling layers formed on a pilot-scale membrane-coupled upflow anaerobic sludge blanket bioreactor (UASB) used to treat urban wastewater was analyzed by scanning electron microscopy and electron-dispersive X-ray microanalysis. For comparison, control samples of the membranes were fed either UASB effluent or raw wastewater in a laboratory-scale experiment. Microbial diversity in the fouling materials was analyzed by temperature gradient gel electrophoresis (TGGE) combined with sequence analysis of partial 16S rRNA. Significant differences in structure of the Bacteria communities were observed amongst the different fouling layers analyzed in the UASB membranes, particularly following a chemical cleaning step (NaClO), while the Archaea communities retained more similarity in all samples. The main Bacteria populations identified were evolutively close to Firmicutes (42.3%) and Alphaproteobacteria (30.8%), while Archaea were mostly affiliated to the Methanosarcinales and Methanospirillaceae. Sphingomonadaceae-related bacteria and methanogenic Archaea were persistently found as components of biofouling, regardless of chemical cleaning.