-1 V bias 67 GHz bandwidth Si-contacted germanium waveguide p-i-n photodetector for optical links at 56 Gbps and beyond.

We demonstrate a 67 GHz bandwidth silicon-contacted germanium waveguide p-i-n photodetector operating at -1 V with 6.8 fF capacitance. The dark current is below 4 nA. The responsivity is 0.74 A/W at 1550 nm and 0.93 A/W at 1310 nm wavelength. 56 Gbps on-off-keying data reception is demonstrated with clear open eye diagrams in both the C-band and O-band.

High-bandwidth uni-traveling carrier waveguide photodetector on an InP-membrane-on-silicon platform.

A uni-traveling carrier photodetector (UTC-PD), heterogeneously integrated on silicon, is demonstrated. It is fabricated in an InP-based photonic membrane bonded on a silicon wafer, using a novel double-sided processing scheme. A very high 3 dB bandwidth of beyond 67 GHz is obtained, together with a responsivity of 0.7 A/W at 1.55 µm wavelength. In addition, open eye diagrams at 54 Gb/s are observed. These results promise high speed applications using a novel full-functionality photonic platform on silicon.

III-V-on-silicon integrated micro - spectrometer for the 3 µm wavelength range.

A compact (1.2 mm2) fully integrated mid-IR spectrometer operating in the 3 µm wavelength range is presented. To our knowledge this is the longest wavelength integrated spectrometer operating in the important wavelength window for spectroscopy of organic compounds. The spectrometer is based on a silicon-on-insulator arrayed waveguide grating filter. An array of InAs0.91Sb0.09 p-i-n photodiodes is heterogeneously integrated on the spectrometers output grating couplers using adhesive bonding. The spectrometer insertion loss is less than 3 dB and the waveguide-referred responsivity of the integrated photodiodes at room temperature is 0.3 A/W.

A two-stage photonic crystal fiber / silicon photonic wire short-wave infrared wavelength converter/amplifier based on a 1064 nm pump source.

We demonstrate a two-stage wavelength converter that uses compact near-infrared sources to amplify and convert short-wave infrared signals. The first stage consists of a photonic crystal fiber wavelength converter pumped by a Q-switched 1064 nm pump source, while the second stage consists of a silicon photonic wire waveguide wavelength converter. The system enables on-chip amplification and conversion of up to 30 dB . We demonstrate amplification in a broad wavelength range around 2344 nm using temporally long pulses (>300ps).

High sensitivity 10Gb/s Si photonic receiver based on a low-voltage waveguide-coupled Ge avalanche photodetector.

We demonstrate low-voltage germanium waveguide avalanche photodetectors (APDs) with a gain × bandwidth product above 100GHz. A photonic receiver based on such a Ge APD, including a 0.13µm SiGe BiCMOS low-noise trans-impedance amplifier and a limiting amplifier, is realized. A 5.8dB sensitivity improvement is demonstrated at -5.9V bias at an avalanche gain of 6 through bit error ratio measurements. The absolute sensitivity in avalanche mode is -23.4dBm and -24.4dBm at a bit error ratio of 1 × 10(-12) and 1 × 10(-9) respectively.

Narrow-linewidth short-pulse III-V-on-silicon mode-locked lasers based on a linear and ring cavity geometry.

Picosecond-pulse III-V-on-silicon mode-locked lasers based on linear and ring extended cavity geometries are presented. In passive mode-locked operation a 12 kHz -3dB linewidth of the fundamental RF tone at 4.7 GHz is obtained for the linear cavity geometry and 16 kHz for the ring cavity geometry. Stabilization of the repetition rate of these devices using hybrid mode-locking is also demonstrated.

III-V-on-silicon anti-colliding pulse-type mode-locked laser.

An anti-colliding pulse-type III-V-on-silicon passively mode-locked laser is presented for the first time based on a III-V-on-silicon distributed Bragg reflector as outcoupling mirror implemented partially underneath the III-V saturable absorber. Passive mode-locking at 4.83 GHz repetition rate generating 3 ps pulses is demonstrated. The generated fundamental RF tone shows a 1.7 kHz 3 dB linewidth. Over 9 mW waveguide coupled output power is demonstrated.

Generation of coherent supercontinuum in a-Si:H waveguides: experiment and modeling based on measured dispersion profile.

Hydrogenated amorphous silicon (a:Si-H) has recently been recognized as a highly nonlinear CMOS compatible photonic platform. We experimentally demonstrate the generation of a supercontinuum (SC) spanning over 500 nm in a-Si:H photonic wire waveguide at telecommunication wavelengths using femtosecond input pulse with energy lower than 5 pJ. Numerical modeling of pulse propagation in the waveguide, based on the experimentally characterized dispersion profile, shows that the supercontinuum is the result of soliton fission and dispersive wave generation. It is demonstrated that the SC is highly coherent and that the waveguides do not suffer from material degradation under femtosecond pulse illumination. Finally, a direct comparison of SC generation in c-Si and a-Si:H waveguides confirms the higher performances of a-Si:H over c-Si for broadband low power SC generation at telecommunication wavelengths.

Silicon-on-insulator shortwave infrared wavelength meter with integrated photodiodes for on-chip laser monitoring.

This paper demonstrates a very compact wavelength meter for on-chip laser monitoring in the shortwave infrared wavelength range based on an optimized arrayed waveguide grating (AWG) filter with an integrated photodiode array. The AWG response is designed to obtain large nearest neighbor crosstalk (i.e. large overlap) between output channels, which allows accurately measuring the wavelength of a laser under test using the centroid detection technique. The passive AWG is fabricated on a 220 nm silicon-on-insulator (SOI) platform and is combined with GaInAsSb-based photodiodes. The photodiodes are heterogeneously integrated on the output grating couplers of the AWG using DVS-BCB adhesive bonding. The complete device with AWG and detectors has a footprint of only 2 mm(2) while the measured accuracy and resolution of the detected wavelength is better than 20pm.

Generation of 3.6 µm radiation and telecom-band amplification by four-wave mixing in a silicon waveguide with normal group velocity dispersion.

Mid-infrared light generation through four-wave mixing-based frequency down-conversion in a normal group velocity dispersion silicon waveguide is demonstrated. A telecom-wavelength signal is down-converted across more than 1.2 octaves using a pump at 2190 nm in a 1 cm-long waveguide. At the same time, a 13 dB on-chip parametric gain of the telecom signal is obtained.

Heterogeneously integrated III-V-on-silicon multibandgap superluminescent light-emitting diode with 290 nm optical bandwidth.

A broadband superluminescent III-V-on-silicon light-emitting diode (LED) was realized. To achieve the large bandwidth, quantum well intermixing and multiple die bonding of InP on a silicon photonic waveguide circuit were combined for the first time, to the best of our knowledge. The device consists of four sections with different bandgaps, centered around 1300, 1380, 1460, and 1540 nm. The fabricated LEDs were connected on-chip in a serial way, where the light generated in the smaller bandgap sections travels through the larger bandgap sections. By balancing the pump current in the four LEDs, we achieved 292 nm of 3 dB bandwidth and an on-chip power of -8 dBm.

Silicon-on-insulator spectrometers with integrated GaInAsSb photodiodes for wide-band spectroscopy from 1510 to 2300 nm.

We present a silicon-on-insulator (SOI) based spectrometer platform for a wide operational wavelength range. Both planar concave grating (PCG, also known as echelle grating) and arrayed waveguide grating (AWG) spectrometer designs are explored for operation in the short-wave infrared. In addition, a total of four planar concave gratings are designed to cover parts of the wavelength range from 1510 to 2300 nm. These passive wavelength demultiplexers are combined with GaInAsSb photodiodes. These photodiodes are heterogeneously integrated on SOI with benzocyclobutene (DVS-BCB) as an adhesive bonding layer. The uniformity of the photodiode characteristics and high processing yield, indicate a robust fabrication process. We demonstrate good performance of the miniature spectrometers over all operational wavelengths which paves the way to on-chip absorption spectroscopy in this wavelength range.

Unidirectional III-V microdisk lasers heterogeneously integrated on SOI.

We demonstrate unidirectional bistability in microdisk lasers electrically pumped and heterogeneously integrated on SOI. The lasers operate in continuous wave regime at room temperature and are single mode. Integrating a passive distributed Bragg reflector (DBR) on the waveguide to which the microdisk is coupled feeds laser emission back into the laser cavity. This introduces an extra unidirectional gain and results in unidirectional emission of the laser, as demonstrated in simulations as well as in experiment.

Uniformity of the lasing wavelength of heterogeneously integrated InP microdisk lasers on SOI.

We report a high lasing wavelength uniformity of optically pumped InP-based microdisk lasers processed with electron-beam lithography, heterogeneously integrated with adhesive bonding on silicon-on-insulator (SOI) waveguide circuits and evanescently coupled to an underlying waveguide. We study the continuous wave laser emission coupling out of the SOI via a grating coupler etched at one side of the waveguide, and demonstrate a standard deviation in lasing wavelength of nominally identical devices on the same chip lower than 500 pm. The deviation in the diameter of the microdisks as low as a few nanometers makes all-optical signal processing applications requiring cascadability possible.

III-V-on-silicon multi-frequency lasers.

Compact multi-frequency lasers are realized by combining III-V based optical amplifiers with silicon waveguide optical demultiplexers using a heterogeneous integration process based on adhesive wafer bonding. Both devices using arrayed waveguide grating routers as well as devices using ring resonators as the demultiplexer showed lasing with threshold currents between 30 and 40 mA and output powers in the order of a few mW. Laser operation up to 60°C is demonstrated. The small bending radius allowable for the silicon waveguides results in a short cavity length, ensuring stable lasing in a single longitudinal mode, even with relaxed values for the intra-cavity filter bandwidths.

Demonstration of Silicon-on-insulator mid-infrared spectrometers operating at 3.8 µm.

The design and characterization of silicon-on-insulator mid-infrared spectrometers operating at 3.8 µm is reported. The devices are fabricated on 200 mm SOI wafers in a CMOS pilot line. Both arrayed waveguide grating structures and planar concave grating structures were designed and tested. Low insertion loss (1.5-2.5 dB) and good crosstalk characteristics (15-20 dB) are demonstrated, together with waveguide propagation losses in the range of 3 to 6 dB/cm.

Heterogeneously integrated III-V/silicon distributed feedback lasers.

Heterogeneously integrated III-V-on-silicon second-order distributed feedback lasers utilizing an ultra-thin DVS-BCB die-to-wafer bonding process are reported. A novel DFB laser design exploiting high confinement in the active waveguide is demonstrated. A 14 mW single-facet output power coupled to a silicon waveguide, 50 dB side-mode suppression ratio and continuous wave operation up to 60°C around 1550 nm is obtained.

Passive InP regenerator integrated on SOI for the support of broadband silicon modulators.

Passive signal regeneration based on the Membrane InP Switch (MIPS) is demonstrated. Because of the high confinement of light in the active region of the MIPS, the device acts as a saturable absorber with a highly non-linear response. Using this effect, the extinction ratio (ER) of low-ER signals can be tripled and a receiver sensitivity enhancement of 4.5dB is demonstrated using an input signal at 1Gb/s with an ER of 2dB. Regenerator operation up to 5Gb/s is demonstrated and using a device simulator a strategy to reach higher bitrate operation is proposed.

Reflectionless grating couplers for Silicon-on-Insulator photonic integrated circuits.

We propose a novel grating coupler design which is inherently reflectionless by focusing the reflected light away from the entrance waveguide. The design rules for this reflectionless grating coupler are explained and the grating coupler design is investigated by means of 3D FDTD simulations for the case of a Silicon-on-Insulator based platform.

Ce:YIG/Silicon-on-Insulator waveguide optical isolator realized by adhesive bonding.

A waveguide optical isolator realized by adhesive bonding of a garnet die, containing a Ce:YIG magneto-optic layer, on a silicon-on-insulator waveguide circuit is demonstrated. The die was bonded on top of an asymmetric Mach-Zehnder interferometer using a 100nm thick DVS-BCB adhesive bonding layer. A static magnetic field applied perpendicular to the light propagation direction results in a non-reciprocal phase shift for the fundamental quasi-TM mode in the hybrid waveguide geometry. A maximum optical isolation of 25 dB is obtained.