RESUMEN
Metasurfaces are a new class of diffractive optical elements with subwavelength elements whose behavior can be lithographically tailored. By leveraging form birefringence, metasurfaces can serve as multifunctional freespace polarization optics. Metasurface gratings are novel, to the best of our knowledge, polarimetric components that integrate multiple polarization analyzers into a single optical element enabling the realization of compact imaging polarimeters. The promise of metasurfaces as a new polarization building block is contingent on the calibration of metagrating-based optical systems. A prototype metasurface full Stokes imaging polarimeter is compared to a benchtop reference instrument using an established linear Stokes test for 670, 532, and 460 nm gratings. We propose a complementary full Stokes accuracy test and demonstrate it using the 532 nm grating. This work presents methods and practical considerations involved in producing accurate polarization data from a metasurface-based Stokes imaging polarimeter and informs their use in polarimetric systems more generally.
RESUMEN
Metasurfaces-subwavelength arrays of phase-shifting elements-present new possibilities for polarization optics and polarimetry. In particular, a periodic, polarization-sensitive metasurface diffraction grating can enable full-Stokes imaging polarimetry with a single polarization-sensitive component. In this work, we show that a suitably-designed metasurface grating can serve as a polarimetric "attachment" to an existing intensity-only imaging system, converting it into one capable of full-Stokes imaging polarimetry. Design rules and tradeoffs governing this adaptation are described and demonstrated using a machine vision imaging system as an example.
RESUMEN
In this Letter, we investigate a new class of polarization wave front transformations which exhibit nonconventional far field interference behavior. We show that these can be realized by double-layer metasurfaces, which overcome the intrinsic limitations of single-layer metasurfaces. Holograms that encode four or more distinct patterns in nonorthogonal polarization states are theoretically demonstrated. This Letter clarifies and expands the possibilities enabled by a broad range of technologies which can spatially modulate light's polarization state and, for metasurfaces specifically, rigorously establishes when double-layer metasurfaces are-and are not-required.
RESUMEN
Since the days of Hertz, radio transmitters have evolved from rudimentary circuits emitting around 50 MHz to modern ubiquitous Wi-Fi devices operating at gigahertz radio bands. As wireless data traffic continues to increase, there is a need for new communication technologies capable of high-frequency operation for high-speed data transfer. Here, we give a proof of concept of a compact radio frequency transmitter based on a semiconductor laser frequency comb. In this laser, the beating among the coherent modes oscillating inside the cavity generates a radio frequency current, which couples to the electrodes of the device. We show that redesigning the top contact of the laser allows one to exploit the internal oscillatory current to drive a dipole antenna, which radiates into free space. In addition, direct modulation of the laser current permits encoding a signal in the radiated radio frequency carrier. Working in the opposite direction, the antenna can receive an external radio frequency signal, couple it to the active region, and injection lock the laser. These results pave the way for applications and functionality in optical frequency combs, such as wireless radio communication and wireless synchronization to a reference source.
RESUMEN
Metasurfaces are arrays of sub-wavelength spaced nanostructures, which can be designed to control the many degrees-of-freedom of light on an unprecedented scale. In this work, we design meta-gratings where the diffraction orders can perform general, arbitrarily specified, polarization transformation without any reliance on conventional polarization components, such as waveplates and polarizers. We use matrix Fourier optics to design our devices and introduce a novel approach for their optimization. We implement the designs using form-birefringent metasurfaces and quantify their behavior - retardance and diattenuation. Our work is of importance in applications, such as polarization abberation correction in imaging systems, and in experiments requiring novel and compact polarization detection and control.
RESUMEN
Optical elements coupling the spin and orbital angular momentum (SAM/OAM) of light have found a range of applications in classical and quantum optics. The J-plate, with J referring to the photon's total angular momentum (TAM), is a metasurface device that imparts two arbitrary OAM states on an arbitrary orthogonal basis of spin states. We demonstrate that when these J-plates are cascaded in series, they can generate several single quantum number beams and versatile superpositions thereof. Moreover, in contrast to previous spin-orbit-converters, the output polarization states of cascaded J-plates are not constrained to be the conjugate of the input states. Cascaded J-plates are also demonstrated to produce vector vortex beams and complex structured light, providing new ways to control TAM states of light.
RESUMEN
The recently discovered ability of the quantum cascade laser to produce a harmonic frequency comb has attracted new interest in these devices for both applications and fundamental laser physics. In this review we present an extensive experimental phenomenology of the harmonic state, including its appearance in mid-infrared and terahertz quantum cascade lasers, studies of its destabilization induced by delayed optical feedback, and the assessment of its frequency comb nature. A theoretical model explaining its origin as due to the mutual interaction of population gratings and population pulsations inside the laser cavity will be described. We explore different approaches to control the spacing of the harmonic state, such as optical injection seeding and variation of the device temperature. Prospective applications of the harmonic state include microwave and terahertz generation, picosecond pulse generation in the mid-infrared, and broadband spectroscopy.
RESUMEN
The constituent elements of metasurfaces may be designed with explicit polarization dependence, making metasurfaces a fascinating platform for new polarization optics. In this work we show that a metasurface grating can be designed to produce arbitrarily specified polarization states on a set of defined diffraction orders given that the polarization of the incident beam is known. We also demonstrate that, when used in a reverse configuration, the same grating may be used as a parallel snapshot polarimeter, requiring a minimum of bulk polarization optics. We demonstrate its use in measuring partially polarized light, and show that it performs favorably in comparison to a commercial polarimeter. This work is of consequence in any application requiring lightweight, compact, and low-cost polarization optics, polarimetry, or polarization imaging.
RESUMEN
We present a method allowing for the imposition of two independent and arbitrary phase profiles on any pair of orthogonal states of polarization-linear, circular, or elliptical-relying only on simple, linearly birefringent wave plate elements arranged into metasurfaces. This stands in contrast to previous designs which could only address orthogonal linear, and to a limited extent, circular polarizations. Using this approach, we demonstrate chiral holograms characterized by fully independent far fields for each circular polarization and elliptical polarization beam splitters, both in the visible. This approach significantly expands the scope of metasurface polarization optics.
RESUMEN
We propose a new class of computer-generated holograms whose far-fields have designer-specified polarization response. We dub these Jones matrix holograms. We provide a simple procedure for their implementation using form-birefringent metasurfaces. Jones matrix holography generalizes a wide body of past work with a consistent mathematical framework, particularly in the field of metasurfaces, and suggests previously unrealized devices, examples of which are demonstrated here. In particular, we demonstrate holograms whose far-fields implement parallel polarization analysis and custom waveplate-like behavior.
RESUMEN
Recent advances in wavefront shaping have enabled complex classes of Structured Light which carry spin and orbital angular momentum, offering new tools for light-matter interaction, communications, and imaging. Controlling both components of angular momentum along the propagation direction can potentially extend such applications to 3D. However, beams of this kind have previously been realized using bench-top setups, requiring multiple interaction with light of a fixed input polarization, thus impeding their widespread applications. Here, we introduce two classes of metasurfaces that lift these constraints, namely: i) polarization-switchable plates that couple any pair of orthogonal polarizations to two vortices in which the magnitude and/or sense of vorticity vary locally with propagation, and ii) versatile plates that can structure both components of angular momentum, spin and orbital, independently, along the optical path while operating on incident light of any polarization. Compact and integrated devices of this type can advance light-matter interaction and imaging and may enable applications that are not accessible via other wavefront shaping tools.
RESUMEN
Recent developments have enabled the practical realization of optical elements in which the polarization of light may vary spatially. We present an extension of Fourier optics-matrix Fourier optics-for understanding these devices and apply it to the design and realization of metasurface gratings implementing arbitrary, parallel polarization analysis. We show how these gratings enable a compact, full-Stokes polarization camera without standard polarization optics. Our single-shot polarization camera requires no moving parts, specially patterned pixels, or conventional polarization optics and may enable the widespread adoption of polarization imaging in machine vision, remote sensing, and other areas.
RESUMEN
Polaritons formed by the coupling of light and material excitations enable light-matter interactions at the nanoscale beyond what is currently possible with conventional optics. However, novel techniques are required to control the propagation of polaritons at the nanoscale and to implement the first practical devices. Here we report the experimental realization of polariton refractive and meta-optics in the mid-infrared by exploiting the properties of low-loss phonon polaritons in isotopically pure hexagonal boron nitride interacting with the surrounding dielectric environment comprising the low-loss phase change material Ge3Sb2Te6. We demonstrate rewritable waveguides, refractive optical elements such as lenses, prisms, and metalenses, which allow for polariton wavefront engineering and sub-wavelength focusing. This method will enable the realization of programmable miniaturized integrated optoelectronic devices and on-demand biosensors based on high quality phonon resonators.
RESUMEN
We present here a compact metasurface lens element that enables simultaneous and spatially separated imaging of light of opposite circular polarization states. The design overcomes a limitation of previous chiral lenses reliant on the traditional geometric phase approach by allowing for independent focusing of both circular polarizations without a 50% efficiency trade-off. We demonstrate circular polarization-dependent imaging at visible wavelengths with polarization contrast greater than 20dB and efficiencies as high as 70%.
RESUMEN
Optical elements that convert the spin angular momentum (SAM) of light into vortex beams have found applications in classical and quantum optics. These elements-SAM-to-orbital angular momentum (OAM) converters-are based on the geometric phase and only permit the conversion of left- and right-circular polarizations (spin states) into states with opposite OAM. We present a method for converting arbitrary SAM states into total angular momentum states characterized by a superposition of independent OAM. We designed a metasurface that converts left- and right-circular polarizations into states with independent values of OAM and designed another device that performs this operation for elliptically polarized states. These results illustrate a general material-mediated connection between SAM and OAM of light and may find applications in producing complex structured light and in optical communication.