Submandibular gland involvement in oral cavity squamous cell carcinoma: a retrospective multicenter study.

BACKGROUND: The submandibular gland (SMG) is routinely excised during neck dissection. Given the importance of the SMG in saliva production, it is important to understand its involvement rate by cancer tissue and the feasibility of its preservation. METHODS: Retrospective data were collected from five academic centers in Europe. The study involved adult patients affected by primary oral cavity carcinoma (OCC) undergoing tumor excision and neck dissection. The main outcome analyzed was the SMG involvement rate. A systematic review and a meta-analysis were also conducted to provide an updated synthesis of the topic. RESULTS: A total of 642 patients were enrolled. The SMG involvement rate was 12/642 (1.9%; 95% CI 1.0-3.2) when considered per patient, and 12/852 (1.4%; 95% CI 0.6-2.1) when considered per gland. All the glands involved were ipsilateral to the tumor. Statistical analysis showed that predictive factors for gland invasion were: advanced pT status, advanced nodal involvement, presence of extracapsular spread and perivascular invasion. The involvement of level I lymph nodes was associated with gland invasion in 9 out of 12 cases. pN0 cases were correlated with a reduced risk of SMG involvement. The review of the literature and the meta-analysis confirmed the rare involvement of the SMG: on the 4458 patients and 5037 glands analyzed, the involvement rate was 1.8% (99% CI 1.1-2.7) and 1.6% (99% CI 1.0-2.4), respectively. CONCLUSIONS: The incidence of SMG involvement in primary OCC is rare. Therefore, exploring gland preservation as an option in selected cases would be reasonable. Future prospective studies are needed to investigate the oncological safety and the real impact on quality of life of SMG preservation.

A Novel Flap for Dynamic Reanimation of Facial Paralysis: Microvascular Sternohyoid Muscle Free Flap.

The main objectives of facial reanimation procedures include restoring facial symmetry at resting state and regaining facial mobility. Static procedures usually provide unsatisfactory results, especially in younger patients. For this reason, over the years, several different surgical alternatives based on autologous, locoregional, or muscle free flaps have been proposed. The gracilis muscle is the gold standard technique for dynamic reanimation of long-standing facial paralysis. The excessive muscle bulk and the differences regarding the type of predominant muscle fiber were compared with the zygomaticus major force reconstructive surgeons to search for alternatives to the gracilis as a potential free flap for reanimation. One of them is the sternohyoid muscle flap. We report a patient with long-standing facial paralysis who underwent a dynamic facial reanimation by using a sternohyoid muscle free flap, thus proposing the procedure as an alternative to the conventional gracilis muscle flap.

Combination of Rigid and Nonrigid Fixation Versus Nonrigid Fixation for Bilateral Mandibular Fractures: A Multicenter Randomized Controlled Trial.

PURPOSE: We aimed to compare complication rates and functional outcomes in patients with bilateral mandibular fractures treated with different degrees of internal fixation rigidity. PATIENTS AND METHODS: This international, multicenter randomized controlled trial included adults with bilateral mandibular fractures located at either the angle and body, angle and symphysis, or body and symphysis. Patients were treated with either a combination of rigid fixation for the anterior fracture and nonrigid fixation for the posterior fracture (mixed fixation) or nonrigid fixation for both fractures. The primary outcome was complications within 6 weeks after surgery. Secondary outcomes were complications within 3 months, Helkimo dysfunction index, and mandibular mobility at 6 weeks and 3 months after surgery. RESULTS: Of the 315 patients enrolled, 158 were randomized to the mixed fixation group and 157 to the nonrigid fixation group. The overall complication rate at 6 weeks in the intention-to-treat population was 9.6% (95% confidence interval [CI], 5.3% to 15.6%) in the mixed fixation group and 7.8% (95% CI, 4.0% to 13.5%) in the nonrigid fixation group. With an unadjusted odds ratio of 1.25 (95% CI, 0.51 to 3.17), there were no statistically significant differences in complication rates between the 2 groups (P = .591). A multivariable model for complication risk at 6 weeks found no significant differences between treatment groups, but patients with moderate or severe displacement had a higher complication rate than those with no or minimal displacement (adjusted odds ratio, 4.58; 95% CI, 1.16 to 18.06; P = .030). There were no significant between-group differences in complication rates at 3 months. Moreover, no significant differences in Helkimo dysfunction index and mandibular mobility index at 6 weeks and 3 months were found between groups according to treatment allocated and treatment received. CONCLUSIONS: A combination of rigid and nonrigid fixation in patients with bilateral mandibular fracture has similar complication rates and functional outcomes to nonrigid fixation for both fractures.

In-and-out Technique: An In-house Efficient Predictive Hole Fabrication Workflow.

Virtual surgical planning (VSP) and three-dimensional (3D) printing can increase precision and reduce surgical time in craniofacial reconstruction. However, the elevated cost and manufacturing time of outsourced workflows is increasing the development of in-house solutions. One of the main challenges in in-house workflows is to create cutting guides that hold plate position information. This is due to the fact that hospitals usually lack the infrastructure required to design and 3D print custom-made plates. Including plate-positioning information in resection guides is especially relevant in complex reconstructions and when tumor extension limits plate placement before resection. Current in-house workflows revolve around the idea of 3D scanning the bent plate's shape and to fuse it with the VSP. The goal of this article is to share our technique to transfer plate position information to resection guides. Our protocol uses a 3D model of the reconstruction as an intermediate step to transfer the plate position of a bent stock reconstruction plate to cutting guides. Two patients who required mandibular reconstruction with fibula flap are presented to illustrate the technique. This workflow requires a 3D-printed model of the desired outcome, cutting guides, and a stock plate. Results were satisfactory in terms of cutting location and angulation, plate adaptation and condylar position. This technique allows for a simple, safe, cheap, and quick alternative to add reconstruction plate information to cutting guides.

Dynamic Trends in Surgical Oromaxillofacial Trauma Epidemiology: A Comparative Study of Pre-COVID-19 and COVID-19 Periods in Tertiary Referral Hospitals in Madrid.

Introduction: The COVID-19 pandemic has induced profound societal and healthcare transformations globally. Material and methods: This multicenter retrospective study aimed to assess potential shifts in the epidemiology and management of oromaxillofacial trauma requiring surgical intervention over a 1-year period encompassing the onset of the COVID-19 pandemic, in comparison to the preceding year. The parameters investigated included age, sex, injury mechanisms, fractured bones, and treatment modalities. The statistical significance was set at p < 0.05. Results: A notable 39.36% reduction in oromaxillofacial fractures was identified (p < 0.001), with no significant alterations in sex distribution, types of fractured bones, or treatment modalities. An appreciable increase in mean age was observed (35.92 vs. 40.26) (p = 0.006). Analysis of the causes of oromaxillofacial trauma revealed diminished incidents of interpersonal violence (41% vs. 35%) and sports-related injuries (14% vs. 8%), alongside an escalation in cases attributed to falls (27% vs. 35%), precipitation events (2% vs. 5%), and traffic accidents (12% vs. 13%). The mandible emerged as the most frequently fractured bone. Conclusion: In conclusion, the COVID-19 pandemic has decreased the number of maxillofacial fractures treated surgically and has changed the epidemiology and the etiology of facial traumas.

A retrospective risk factor analysis of infection and wound dehiscence following guided bone regeneration in cystectomy defects of the jaws.

This study's objective is to determine if the combined use of bone substitutes and collagen membranes is related to worse postoperative outcomes after intra-osseous oral cystectomies. Additional risk factors mentioned in the existing literature were retrospectively analysed by reviewing the medical records and imaging tests of adult patients. Age, gender, smoking habit, cyst location, size, shape, histopathology, perilesional osteosclerosis and associated intracystic third molars were registered. The type of biomaterials applied and the number of bony walls remaining after surgery were also identified. All factors were analysed in relation to wound dehiscence and postoperative infection. Simple and multiple logistic regression analyses were performed to exclude possible confounding effects between the risk factors identified. In a sample of 211 cystectomies, guided bone regeneration was not significantly associated with infection, only the presence of impacted third molars was (p = 0.0219). This finding remained true, even in cysts larger than 25 mm. However, the risk of wound dehiscence was 4.9 times higher when biomaterials were applied (CI 95%, 1.6818-12.8274, p = 0.0014). In accordance with recent studies, these findings suggest that whenever guided bone regeneration might prove useful after cyst enucleation, avoiding chemically cross-linked membranes should be considered.

"Management of recurrent temporomandibular dislocation using orthodontic traction screws."

Temporomandibular joint dislocation is defined as the loss of joint congruency between the mandibular condyle and the glenoid fossa of the temporal bone. Multiple therapeutic options have been proposed for the treatment of recurrent TMJ dislocation. The aim of this paper is to present two recently treated cases with a modification of Wolford's technique, replacing the Mitek anchors with orthodontic screws. Case series: The first case concerns a 36 year-old women with recurrent temporomandibular dislocation, and the second one a 26 year-old patient with the same diagnosis. In both cases, one 8mm orthodontic screw was placed in the lateral pole of mandibular condyle, sutured with PremiCron® 2/0 to a hole made in the root of each zygomatic arch. At twelve-month follow-up (first patient) and at six-month follow-up (second patient), patients had not presented new episodes of mandibular dislocation and mouth opening range remained stable. This technique can be considered as an alternative to Wolford's technique in treating recurrent temporomandibular dislocation when conservative management fails.

The Impact of Healthcare-Associated Infections in Patients Undergoing Oncological Microvascular Head and Neck Reconstruction: A Prospective Multicentre Study.

(1) Background: Healthcare-associated infections (HAIs) after head and neck free-flap reconstruction are a common postoperative complication. Risk factors for HAIs in this context and their consequences have not been adequately described. (2) Methods: Ongoing prospective multicentre study between 02/2019 and 12/2020. Demographic characteristics and outcomes were analysed, focusing on infections. (3) Results: Forty out of 65 patients (61.54%) suffered HAIs (surgical site infection: 52.18%, nosocomial pneumonia: 23.20%, bloodstream infection: 13% and urinary tract infection: 5.80%). Methicillin-resistant Staphylococcus aureus (MRSA) and resistant Pseudomonas aeruginosa, Klebsiella pneumoniae and Enterobacter cloacae were the most frequently implicated. The significant risk factors for infection were: previous radiotherapy (Odds ratio (OR): 5.42; 95% confidence interval (CI), 1.39-21.10), anaemia (OR: 8.00; 95% CI, 0.96-66.95), salvage surgery (eight out of eight patients), tracheostomy (OR: 2.86; 95% CI, 1.01-8.14), surgery duration (OR: 1.01; 95% CI, 1.00-1.02), microvascular reoperation <72 h (eight/eight) and flap loss (eight/eight). The major surgical complications were: a need to reoperate (OR: 6.89; 95% CI, 1.42-33.51), prolonged hospital admission (OR: 1.16; 95% CI, 1.06-1.27) and delay in the initiation of postoperative radiotherapy (OR: 9.07; 95% CI, 1.72-47.67). The sixth month mortality rate in patients with HAIs was 7.69% vs. 0% in patients without HAIs (p = 0.50). (4) Conclusions: HAIs were common after this type of surgery, many of them caused by resistant microorganisms. Some modifiable risk factors were identified. Infections played a role in cancer prognosis by delaying adjuvant therapy.

Degrees of tolerance in post-traumatic orbital volume correction: the role of prefabricated mesh.

PURPOSE: To identify factors influencing the volumetric correction of orbital fractures, and evaluate the use of prefabricated titanium mesh in their repair. MATERIALS AND METHODS: We included patients with unilateral orbital fractures and floor or medial-wall defects, subsequently reconstructed with titanium mesh, and subject to adequate follow-up with multislice, digitalized computed tomography (CT) images. Medical records were reviewed, and demographics, operative details, and postoperative course were recorded as prognostic variables. Moreover, orbital volume, apex-to-globe distance, and orbital rim area were measured using postoperative CT. Univariate analysis and a multiple-regression model were used to identify associated factors. RESULTS: A total of 32 patients fulfilled the inclusion criteria. Postoperative clinical evaluation and CT images were obtained in a mean +/- SD of 12.3 +/- 7.2 months after surgery. Clinically, 20 patients were considered normal (63%), and 12 manifested some ocular dystopia (37%). On postoperative CT, the mesh was in good position in 44% of cases, and in an insufficient position in 56% of cases. There was a significant difference between fractured and normal orbits in relation to orbital volume and apex-globe distance. Clinical evaluation significantly correlated with CT mesh placement, but there was no correlation between clinical evaluation and any of the variables measured on CT. The most important factors influencing postoperative orbital volume correction were type of fracture, affected walls, and use of prefabricated mesh. CONCLUSION: Volumetric and lineal symmetry between fractured and normal orbits are very difficult to achieve. In this study, postoperative CT measurements did not correlate with subjective clinical assessment. The clinical-radiological disagreement may be explained by measurement accuracy problems, clinical bias, or normal differences between orbits. The most important identified modifiable factor was the use of prefabricated mesh.

Overexpression of PIK3CA in head and neck squamous cell carcinoma is associated with poor outcome and activation of the YAP pathway.

OBJECTIVES: Phosphatidylinositol 3-kinase catalytic subunit alpha (PIK3CA) is commonly altered in many human tumors, leading to the activation of p110α enzymatic activity that stimulates growth factor-independent cell growth. PIK3CA alterations such as mutation, gene amplification and overexpression are common in head and neck squamous cell carcinoma (HNSCC) and. We aim to explore how these alterations and clinical outcome are associated, as well as the molecular mechanisms involved. MATERIAL AND METHODS: Mutation and copy-number variation in PIK3CA, and whole-genome expression profiles, were analyzed in primary HNSCC tumors from The Cancer Genome Atlas (TCGA) cohort (n = 243). The results were validated in an independent cohort form the University Hospital of A Coruña (UHAC, n = 62). Expression of the PIK3CA gene protein product (PI3K p110α) and nuclear YAP were assessed in tissue microarrays in a cohort from the University Hospital 12 de Octubre (UH12O, n = 91). RESULTS: Only high expression of the PIK3CA gene was associated with poor clinical outcome. The study of gene expression, transcription factor and protein signatures suggested that the activation of the Hippo-YAP pathway, involved in organ size, stem cell maintenance and tumorigenesis, could underlie tumor progression in PI3KCA overexpressing tumors. Tissue arrays showed that PI3K p110α levels correlated with YAP nuclear localization in HNSCC tumors. CONCLUSIONS: High expression of PIK3CA in HNSCC primary tumors identifies patients at high risk for recurrence. In these tumors, progression could rely on the Hippo-YAP pathway instead of the canonical Akt/mTOR pathway. This observation could have important implications in the therapeutic options for patients.

Is there more to the clinical outcome in posttraumatic reconstruction of the inferior and medial orbital walls than accuracy of implant placement and implant surface contouring? A prospective multicenter study to identify predictors of clinical outcome.

PURPOSE: Reconstruction of orbital wall fractures is demanding and has improved dramatically with the implementation of new technologies. True-to-original accuracy of reconstruction has been deemed essential for good clinical outcome, and reasons for unfavorable clinical outcome have been researched extensively. However, no detailed analysis on the influence of plate position and surface contour on clinical outcome has yet been published. MATERIALS AND METHODS: Data from a previous study were used for an ad-hoc analysis to identify predictors for unfavorable outcome, defined as diplopia or differences in globe height and/or globe projection of >2 mm. Presumed predictors were implant surface contour, aberrant implant dimension or position, accuracy of reconstructed orbital volume, and anatomical fracture topography according to the current AO classification. RESULTS: Neither in univariable nor in multivariable regression models were unfavorable clinical outcomes associated with any of the presumed radiological predictors, and no association of the type of implant, i.e., standard preformed, CAD-based individualized and non-CAD-based individualized with its surface contour could be shown. CONCLUSION: These data suggest that the influence of accurate mechanical reconstruction on clinical outcomes may be less predictable than previously believed, while the role of soft-tissue-related factors may have been underestimated.