Neodymium laser-pumped ultra-low noise tunable Brillouin fiber laser around 920†nm.

We have developed an ultra-low noise tunable Brillouin fiber laser exhibiting three orders of magnitude better frequency noise performance than the Neodymium-doped fiber laser pump and remarkable optical signal-to-noise ratio exceeding 80 dB suitable for immediate applications in coherent nonlinear conversion, quantum computing and underwater communications. In addition, we have implemented a custom optical phase-locked loop to ensure long-term stable operation and have investigated its impact on frequency noise. We demonstrate the power scalability of the single frequency (Hz-class) Brillouin laser, delivering over 500 mW with tunability across the 900 nm to 930 nm range in an all-fiber fully polarization-maintaining architecture.

High-power nonlinear amplification of an ultrafast electro-optic frequency comb with flexible GHz repetition rate.

We report on an all-fiber 200 W widely tunable GHz electro-optic (EO) frequency comb operating in the nonlinear regime. The EO comb pulses at 1030 nm are initially pre-compressed to sub-2 ps, then power amplified to 2.5 W, and finally boosted to 200 W in a newly designed large-mode-area, Yb-doped photonic crystal fiber. Continuously tunable across 12-18 GHz, the picosecond pulses experience nonlinear propagation in the last amplifier, leading to output pulses compressible down to several hundreds of femtoseconds. To push our system deeper into nonlinear amplification regime, the pulse repetition rate is further reduced to 2 GHz, enabling significant spectral broadening at 200 W. Characterization reveals sub-200 fs duration after compression. The present EO-comb seeded nonlinear amplification system opens a new route to the development of high-power, tunable GHz-repetition-rate, femtosecond fiber lasers.

High power ultralow-intensity noise continuous wave laser tunable from orange to red.

We report here on the development of a multi-Watt power tunable single frequency ultra-low noise laser system emitting around 620 nm. More than 5 W of output power is obtained between 616.5 nm and 630.8 nm using sum frequency generation of 1050 nm and 1550 nm tunable laser sources in a periodic poled lithium niobate crystal. The tunability is achieved through temperature and channel shift, and only limited by the crystal characteristics. An output power of 10.1 W and an optical-optical efficiency of 45% are reached at 624.5 nm. The relative intensity noise properties of the conversion process have been experimentally investigated in different configurations showing excellent agreement with the analytical prediction.

Multi-gigahertz femtosecond pulses from linear and nonlinear propagation of a phase-modulated laser.

We propose and demonstrate a non-mode-locking approach to generating multi-gigahertz repetition rate, femtosecond pulses in burst mode by shaping a continuous-wave (CW) seed laser in an all-fiber configuration. The seed laser at 1030 nm is first phase modulated and de-chirped to low-contrast, ∼2 ps pulses at a 17.5 GHz repetition rate, then carved to bursts at a 60 kHz repetition rate, and finally shaped to <2 ps clean pulses by a Mamyshev regenerator. This prepared high-quality picosecond source is further used to seed an Yb-doped fiber amplifier operating in the highly nonlinear regime, delivering output pulses at 23 nJ/pulse and $20\,\mathrm{\mu}$J/burst, compressible to ∼100 fs level. The system eliminates the need for mode-locked cavities and simplifies conventional ultrafast electro-optic combs to using only one phase modulator, while providing femtosecond pulses at multiple gigahertz repetition rate, enhanced pulse energy in burst mode and the potential of further power/energy scaling.

Effect of Linewidth on the Relative Intensity Noise in Random Distributed Feedback Raman Fiber Lasers.

We experimentally explore the relation between spectral linewidth and RIN transfer in half-open cavity random distributed feedback Raman lasers, demonstrating for the first time the possibility of adjusting the pump-to-signal RIN transfer intensity and cut-off frequency by using spectral filtering in the reflector section. We apply this approach to a 50-km laser system, operating in the C-Band, reliant on a standard single-mode fiber. We obtained a minimum bandwidth of 13 pm, which translates into a visible RIN cut-off at 800 MHz.

Linearly-polarized pulsed Nd-doped fiber MOPA at 905†nm and frequency conversion to deep-UV at 226†nm.

We present the first frequency-quadrupled linearly-polarized Q-switched neodymium-doped fiber laser generating > 500 mW average power at 226 nm. For this purpose, an amplified Q-switched oscillator using novel large-mode-area (LMA) fibers and generating up to 24 W average power (15 kW peak power) at 905 nm was developed. Two nonlinear frequency conversion stages using a LBO crystal for SHG and a BBO crystal for FHG generate respectively up to 4.9 W average power in the deep blue at 452 nm and a maximum of 510 mW average power in the deep ultra-violet (DUV) at 226 nm. Performance limitations and further improvements are discussed.

Robust 17 W single-pass second-harmonic-generation at 532 nm and relative-intensity-noise investigation.

We demonstrate a 17 W single-frequency, low-intensity-noise green source at 532 nm, by single-pass second-harmonic generation of a 50 W continuous-wave fiber laser in a 30 mm MgO-doped periodically-poled stoichiometric lithium tantalate crystal. The maximum conversion efficiency is about 37%. A nearly Gaussian beam (M2<1.15 at 15 W) and low wavefront distortion are obtained. The system shows stable behavior over 100 h of uninterrupted operation. The evolution of the relative-intensity-noise transfer from the fundamental to the second harmonic is theoretically and experimentally investigated with high resolution.

Electro-optic comb pumped optical parametric oscillator with flexible repetition rate at GHz level.

We present a gigahertz (GHz)-repetition-rate optical parametric oscillator (OPO) pumped by an electro-optic comb at 1.03 µm, delivering sub-picosecond signal pulses across 1.5-1.7 µm from a MgO-doped periodically poled LiNbO3 crystal. Using a pump power of 5 W at 14.2 GHz repetition rate, 378 mW of signal power is obtained at 1.52 µm from a subharmonic cavity, corresponding to a signal extraction efficiency of 7.6%. By cascading a Mach-Zehnder modulator, the pump pulse repetition rate can be divided by any integer number from one to 14, allowing the OPO to operate with a flexible repetition rate from 1 to 14.2 GHz. A strategy leading to quasi-continuous repetition rate tunability of the OPO is also discussed.

Measurements of the absolute timing jitter and intensity noise of an all-fiber Mamyshev oscillator.

We present the experimental investigation of timing jitter and relative intensity noise of a Mamyshev ring oscillator operating in the fundamental mode-lock regime. We find that both timing jitter and intensity noise spectra are correlated to the output optical power with noise increase close to the loss of the mode-locking. In addition, we have investigated the dependence of the spectral filters wavelength separation on both timing jitter and intensity noise showing a severe degradation with filters overlapping.

Ultralow-intensity noise, 10 W all-fiber single-frequency tunable laser system around 1550 nm.

We report herein on the development of a linearly polarized, single-frequency tunable laser system producing more than 10 W in the 1550 nm range, using a two-stage erbium/ytterbium co-doped fiber-based master oscillator power amplifier (MOPA) architecture. The all-fiber MOPA provides an ultralow intensity noise of -160dBc/Hz beyond 200 kHz between 1533 and 1571 nm (Δλ=38nm) at full output power and a minimum optical signal to noise ratio of 38 dB. A good stability is obtained over 4 h at maximum power for several wavelengths with peak-to-peak fluctuation less than 3% and rms below 0.5%.

Multi-GHz repetition rate, femtosecond deep ultraviolet source in burst mode derived from an electro-optic comb.

We present a femtosecond, 11.48 GHz intra-burst repetition rate deep UV source at 258 nm based on forth-harmonic generation (FHG) of an electro-optic (EO) comb operating in burst mode. Second-harmonic generation (SHG) of the burst-mode EO comb in LiB3O5 (LBO) leads to 3.7 W average power and 242 fs root-mean-square pulse duration. A second stage of SHG is further performed using two separate ß-BaB2O4 (BBO) crystals, delivering deep UV pulses at 523 mW and 294 mW, with estimated pulse durations of half-ps and sub-300 fs, respectively. At divided pulse repetition rates of 5.7 GHz and 2.9 GHz, FHG is also demonstrated, highlighting the potential of flexible repetition rate operation at the GHz level.

Quantum cascade laser-pumped terahertz molecular lasers: frequency noise and phase-locking using a 1560†nm frequency comb.

We report the measurement of the frequency noise power spectral density (PSD) of a Terahertz (THz) molecular laser (ML) pumped by a mid-infrared (MIR) quantum cascade laser (QCL), and emitting 1 mW at 1.1THz in continuous wave. This is achieved by beating the ML frequency with the 1080th harmonic of the repetition rate of a 1560 nm frequency comb (FC). We find a frequency noise PSD < 10Hz2/Hz (-95dBc/Hz) at 100kHz from the carrier. To demonstrate the effect of the stability of the pump laser on the spectral purity of the THz emission we also measure the frequency noise PSD of a CO2-laser-pumped 2.5THz ML, reaching 0.1Hz2/Hz (-105dBc/Hz) at 40kHz from the carrier, limited by the frequency noise of the FC harmonic. Finally, we show that it is possible to actively phase-lock the QCL-pumped molecular laser to the FC repetition rate harmonic by controlling the QCL current, demonstrating a sub-Hz linewidth.

Anomalous relative intensity noise transfer in ultralong random fiber lasers.

We present, for the first time, an experimental demonstration of RIN noise transfer dampening at low frequencies in random distributed feedback ultralong Raman fibre lasers based on conventional telecommunication fibres. Furthermore, we present a thorough theoretical description of the phenomenon and demonstrate how our model can be used to predict the observed behaviour, identifying the general requirements for system improvement through RIN transfer reduction.

Ultra-low intensity noise, all fiber 365 W linearly polarized single frequency laser at 1064†nm.

We demonstrate a robust linearly polarized 365 W, very low amplitude noise, single frequency master oscillator power amplifier at 1064 nm. Power scaling was done through a custom large mode area fiber with a mode field diameter of 30 µm. No evidence of stimulated Brillouin scattering or modal instabilities are observed. The relative intensity noise is reduced down to -160 dBc/Hz between 2 kHz and 10 kHz via a wide band servo loop (1 MHz bandwidth). We achieve 350 W of isolated power, with a power stability < 0.7% RMS over 1100 hours of continuous operation and a near diffraction limited beam (M2 < 1.1).

Measurement of absolute timing jitter of SESAM mode-locked lasers with yoctosecond sensitivity.

Absolute timing jitter from a mode-locked laser is characterized with a record low noise floor of 122ys/Hz (1.5×10-14s2/Hz). We develop a novel measurement technique using cross-spectrum methods in combination with a dual balanced optical cross-correlator system, with three independent low-noise mode-locked lasers.

Compact and ultrastable photonic microwave oscillator.

Frequency comb synthesized microwaves have been so far realized with tabletop systems, operated in well-controlled environments. Here, we demonstrate state-of-the-art ultrastable microwave synthesis with a compact rack-mountable apparatus. We present absolute phase noise characterization of a 12 GHz signal using an ultrastable laser at $\sim{194}\;{\rm THz}$∼194THz and an Er:fiber comb divider, obtaining $ - {83}\;{\rm dBc/Hz}$-83dBc/Hz at 1 Hz and $ \lt - {166}\;{\rm dBc/Hz}$<-166dBc/Hz for offsets greater than 5 kHz. Employing semiconductor coating mirrors for the same type of transportable optical frequency reference, we show that $ - {105}\;{\rm dBc/Hz}$-105dBc/Hz at 1 Hz is supported by demonstrating a residual noise limit of division and detection process of $ - {115}\;{\rm dBc/Hz}$-115dBc/Hz at 1 Hz. This level of fidelity paves the way for the deployment of ultrastable photonic microwave oscillators and for operating transportable optical clocks.

High-power widely tunable ps source in the visible light based on four wave mixing in optimized photonic crystal fibers.

We present a detailed study on the generation of widely tunable visible light through four wave mixing in specifically designed micro-structured fibers. The fiber's properties are optimized for an efficient conversion to the visible and near infrared with a combined tunability from 620 to 910 nm of a picosecond Yb-doped tunable source for biomedical applications.

25 W single-frequency, low noise fiber MOPA at 1120 nm.

This Letter reports on the development of a 25 W single-frequency, all-fiber master oscillator power amplifier (MOPA) operating at 1120 nm. By heating the gain fiber at 75°C, an output power of 25.3 W is achieved with an optical-to-optical efficiency of 53.5%. The output shows no sign of stimulated Brillouin scattering and the signal to amplified spontaneous emission ratio is close to 40 dB. A M2 value of 1.15 and a polarization extinction ratio of 17 dB are measured. The relative intensity noise of the output is also characterized, reaching -155 dBc/Hz at 10 MHz at the maximum output power. The study of the noise dynamics highlights, for the first time to the best of our knowledge, an unpredicted behavior due to the strong backward amplified spontaneous emission.

High-power tunable low-noise coherent source at 1.06 µm based on a surface-emitting semiconductor laser.

Exploiting III-V semiconductor technologies, vertical external-cavity surface-emitting laser (VECSEL) technology has been identified for years as a good candidate to develop lasers with high power, large coherence, and broad tunability. Combined with fiber amplification technology, tunable single-frequency lasers can be flexibly boosted to a power level of several tens of watts. Here, we demonstrate a high-power, single-frequency, and broadly tunable laser based on VECSEL technology. This device emits in the near-infrared around 1.06 µm and exhibits high output power (>100 mW) with a low-divergence diffraction-limited TEM00 beam. It also features a narrow free-running linewidth of <400 kHz with high spectral purity (side mode suppression ratio >55 dB) and continuous broadband tunability greater than 250 GHz (<15 V piezo voltage, 6 kHz cutoff frequency) with a total tunable range up to 3 THz. In addition, a compact design without any movable intracavity elements offers a robust single-frequency regime. Through fiber amplification, a tunable single-frequency laser is achieved at an output power of 50 W covering the wavelength range from 1057 to 1066 nm. Excess intensity noise brought on by the amplification stage is in good agreement with a theoretical model. A low relative intensity noise value of -145 dBc/Hz is obtained at 1 MHz, and we reach the shot-noise limit above 200 MHz.

Gain dynamics of clad-pumped Yb-fiber amplifier and intensity noise control.

Gain dynamics study provides an attractive method to understand the intensity noise behavior in fiber amplifiers. Here, the gain dynamics of a medium power (5 W) clad-pumped Yb-fiber amplifier is experimentally evaluated by measuring the frequency domain transfer functions for the input seed and pump lasers from 10 Hz to 1 MHz. We study gain dynamic behavior of the fiber amplifier in the presence of significant residual pump power (compared to the seed power), showing that the seed transfer function is strongly saturated at low Fourier frequencies while the pump power modulation transfer function is nearly unaffected. The characterization of relative intensity noise (RIN) of the fiber amplifier is well explained by the gain dynamics analysis. Finally, a 600 kHz bandwidth feedback loop using an acoustic-optical modulator (AOM) controlling the seed intensity is successfully demonstrated to suppress the broadband laser intensity noise. A maximum noise reduction of about 30 dB is achieved leading to a RIN of -152 dBc/Hz (~1 kHz-10 MHz) at 2.5 W output power.