RESUMEN
Bismuth-based coordination complexes are advantageous over other metal complexes, as bismuth is the heaviest nontoxic element with high spin-orbit coupling and potential optoelectronics applications. Herein, four bismuth halide-based coordination complexes [Bi2Cl6(phen-thio)2] (1), [Bi2Br6(phen-thio)2] (2), [Bi2I6(phen-thio)2] (3), and [Bi2I6(phen-Me)2] (4) were synthesized, characterized, and subjected to detailed photophysical studies. The complexes were characterized by single-crystal X-ray diffraction, powder X-ray diffraction, and NMR studies. Spectroscopic analyses of 1-4 in solutions of different polarities were performed to understand the role of the organic and inorganic components in determining the ground- and excited-state properties of the complexes. The photophysical properties of the complexes were characterized by ground-state absorption, steady-state photoluminescence, microsecond time-resolved photoluminescence, and absorption spectroscopy. Periodic density functional theory (DFT) calculations were performed on the solid-state structures to understand the role of the organic and inorganic parts of the complexes. The studies showed that changing the ancillary ligand from chlorine (Cl) and bromine (Br) to iodine (I) bathochromically shifts the absorption band along with enhancing the absorption coefficient. Also, changing the halides (Cl, Br to I) affects the photoluminescent quantum yields of the ligand-centered (LC) emissive state without markedly affecting the lifetimes. The combined results confirmed that ground-state properties are strongly influenced by the inorganic part, and the lower-energy excited state is LC. This study paves the way to design novel bismuth coordination complexes for optoelectronic applications by rigorously choosing the ligands and bismuth salt.
RESUMEN
The layered perovskite (MA)2PbI2(SCN)2 (MA = CH3NH3+) is a member of an emerging series of compounds derived from hybrid organic-inorganic perovskites. Here, we successfully synthesized (MA)2PbI2-xBrx(SCN)2 (0 ≤ x < 1.6) by using a solid-state reaction. Despite smaller bromide substitution for iodine, 1% linear expansion along the a axis was observed at x â¼ 0.4 due to a change of the orientation of the SCN- anions. Diffuse reflectance spectra reveal that the optical band gap increases by the bromide substitution, which is supported by the DFT calculations. Curiously, bromine-rich compounds where x ≥ 0.8 are light sensitive, leading to partial decomposition after â¼24 h. This study demonstrates that the layered perovskite (MA)2PbI2(SCN)2 tolerates a wide range of bromide substitution toward tuning the band gap energy.
RESUMEN
Singlet fission, the process of forming two triplet excitons from one singlet exciton, is a characteristic reserved for only a handful of organic molecules due to the atypical energetic requirement for low energy excited triplet states. The predominant strategy for achieving such a trait is by increasing ground state diradical character; however, this greatly reduces ambient stability. Herein, we exploit Baird's rule of excited state aromaticity to manipulate the singlet-triplet energy gap and create novel singlet fission candidates. We achieve this through the inclusion of a [4n] 5-membered heterocycle, whose electronic resonance promotes aromaticity in the triplet state, stabilizing its energy relative to the singlet excited state. Using this theory, we design a family of derivatives of indolonaphthyridine thiophene (INDT) with highly tunable excited state energies. Not only do we access novel singlet fission materials, they also exhibit excellent ambient stability, imparted due to the delocalized nature of the triplet excited state. Spin-coated films retained up to 85% activity after several weeks of exposure to oxygen and light, while analogous films of TIPS-pentacene showed full degradation after 4 days, showcasing the excellent stability of this class of singlet fission scaffold. Extension of our theoretical analysis to almost ten thousand candidates reveals an unprecedented degree of tunability and several thousand potential fission-capable candidates, while clearly demonstrating the relationship between triplet aromaticity and singlet-triplet energy gap, confirming this novel strategy for manipulating the exchange energy in organic materials.
RESUMEN
We report a study on the optical properties of the layered polymorph of vacancy-ordered triple perovskite Cs3Bi2Br9. The electronic structure, determined from density functional theory calculations, shows the top of the valence band and bottom of the conduction band minima are, unusually, dominated by Bi s and p states, respectively. This produces a sharp exciton peak in the absorption spectra with a binding energy that was approximated to be 940 meV, which is substantially stronger than values found in other halide perovskites and, instead, more closely reflects values seen in alkali halide crystals. This large binding energy is indicative of a strongly localized character and results in a highly structured emission at room temperature as the exciton couples to vibrations in the lattice.
RESUMEN
Novel lead and bismuth dipyrido complexes have been synthesized and characterized by single-crystal X-ray diffraction, which shows their structures to be directed by highly oriented π-stacking of planar fully conjugated organic ligands. Optical band gaps are influenced by the identity of both the organic and inorganic component. Density functional theory calculations show optical excitation leads to exciton separation between inorganic and organic components. Using UV-vis, photoluminescence, and X-ray photoemission spectroscopies, we have determined the materials' frontier energy levels and show their suitability for photovoltaic device fabrication by use of electron- and hole-transport materials such as TiO2 and spiro-OMeTAD respectively. Such organic/inorganic hybrid materials promise greater electronic tunability than the inflexible methylammonium lead iodide structure through variation of both the metal and organic components.
RESUMEN
To explore the possibility of oxygen dimerization-particularly, the formation of molecular oxygen-like species-in the bulk of LiNiO2 lithium ion cathode materials at high states of charge, we conduct a redox-product structure search inspired by recent methodological developments for point-defect structure prediction. We find that (1) delithiated Li1-x NiO2 (x = 1) has good kinetic stability toward decomposition into molecular oxygen and reduced transition-metal oxides but (2) defects can act as nucleation sites for oxygen dimerization. These results help reconcile conflicting reports on the formation of bulk molecular oxygen in LiNiO2 and other nickel-rich cathode materials, highlighting the role of defect chemistry in driving the bulk degradation of these compounds.
RESUMEN
Utilising photocatalytic water splitting to produce green hydrogen is the key to reducing the carbon footprint of this crucial chemical feedstock. In this study, density functional theory (DFT) is employed to gain insights into the photocatalytic performance of an up-and-coming photocatalyst Y2Ti2O5S2 from first principles. Eleven non-polar clean surfaces are evaluated at the generalised gradient approximation level to obtain a plate-like Wulff shape that agrees well with the experimental data. The (001), (101) and (211) surfaces are considered further at hybrid-DFT level to determine their band alignments with respect to vacuum. The large band offset between the basal (001) and side (101) and (211) surfaces confirms experimentally observed spatial separation of hydrogen and oxygen evolution facets. Furthermore, relevant optoelectronic bulk properties were established using a combination of hybrid-DFT and many-body perturbation theory. The optical absorption of Y2Ti2O5S2 weakly onsets due to dipole-forbidden transitions, and hybrid Wannier-Mott/Frenkel excitonic behaviour is predicted to occur due to the two-dimensional electronic structure, with an exciton binding energy of 0.4 eV.
RESUMEN
We report the growth and photophysical characterization of two polar hybrid lead halide phases, methylenedianiline lead iodide and bromide, (MDA)Pb2I6 and (MDA)Pb2Br6, respectively. The phases crystallize in noncentrosymmetric space group Fdd2, which produces a highly oriented molecular dipole moment that gives rise to second harmonic generation (SHG) upon excitation at 1064 nm. While both compositions are isostructural, the size dependence of the SHG signal suggests that the bromide exhibits a stronger phase-matching response whereas the iodide exhibits a significantly weaker non-phase-matching signal. Similarly, fluorescence from (MDA)Pb2Br6 is observed around 630 nm below 75 K whereas only very weak luminescence from (MDA)Pb2I6 can be seen. We attribute the contrasting optical properties to differences in the character of the halide sublattice and postulate that the increased polarizability of the iodide ions acts to screen the local dipole moment, effectively reducing the local electric field in the crystals.
RESUMEN
Green production of hydrogen is possible with photocatalytic water splitting, where hydrogen is produced while water is reduced by using energy derived from light. In this study, density functional theory (DFT) is employed to gain insights into the photocatalytic performance of La5Ti2AgS5O7 and La5Ti2CuS5O7-two emerging candidate materials for water splitting. The electronic structure of both bulk materials was calculated by using hybrid DFT, which indicated the band gaps and charge carrier effective masses are suitable for photocatalytic water splitting. Notably, the unique one-dimensional octahedral TiO x S6-x and tetragonal MS4 channels formed provide a structural separation for photoexcited charge carriers which should inhibit charge recombination. Band alignments of surfaces that appear on the Wulff constructions of 12 nonpolar symmetric surface slabs were calculated by using hybrid DFT for each of the materials. All surfaces of La5Ti2AgS5O7 have band edge positions suitable for hydrogen evolution; however, the small overpotentials on the largest facets likely decrease the photocatalytic activity. In La5Ti2CuS5O7, 72% of the surface area can support oxygen evolution thermodynamically and kinetically. Based on their similar electronic structures, La5Ti2AgS5O7 and La5Ti2CuS5O7 could be effectively employed in Z-scheme photocatalytic water splitting.
RESUMEN
Low-cost, nontoxic, and earth-abundant photovoltaic materials are long-sought targets in the solar cell research community. Perovskite-inspired materials have emerged as promising candidates for this goal, with researchers employing materials design strategies including structural, dimensional, and compositional transformations to avoid the use of rare and toxic elemental constituents, while attempting to maintain high optoelectronic performance. These strategies have recently been invoked to propose Ti-based vacancy-ordered halide perovskites (A2TiX6; A = CH3NH3, Cs, Rb, or K; X = I, Br, or Cl) for photovoltaic operation, following the initial promise of Cs2SnX6 compounds. Theoretical investigations of these materials, however, consistently overestimate their band gaps, a fundamental property for photovoltaic applications. Here, we reveal strong excitonic effects as the origin of this discrepancy between theory and experiment, a consequence of both low structural dimensionality and band localization. These findings have vital implications for the optoelectronic application of these compounds while also highlighting the importance of frontier-orbital character for chemical substitution in materials design strategies.
RESUMEN
Perovskite-inspired materials aim to replicate the optoelectronic performance of lead-halide perovskites, while eliminating issues with stability and toxicity. Chalcohalides of group IV/V elements have attracted attention due to enhanced stability provided by stronger metal-chalcogen bonds, alongside compositional flexibility and ns2 lone pair cations - a performance-defining feature of halide perovskites. Following the experimental report of solution-grown tin-antimony sulfoiodide (Sn2SbS2I3) solar cells, with power conversion efficiencies above 4%, we assess the structural and electronic properties of this emerging photovoltaic material. We find that the reported centrosymmetric Cmcm crystal structure represents an average over multiple polar Cmc21 configurations. The instability is confirmed through a combination of lattice dynamics and molecular dynamics simulations. We predict a large spontaneous polarisation of 37 µC cm-2 that could be active for electron-hole separation in operating solar cells. We further assess the radiative efficiency limit of this material, calculating ηmax > 30% for film thicknesses t > 0.5 µm.
RESUMEN
Accurately modelling polymorphism in crystalline solids remains a key challenge in computational chemistry. In this work, we apply a theoretically-rigorous phonon mode-mapping approach to understand the polymorphism in the ternary metal oxide Bi2Sn2O7. Starting from the high-temperature cubic pyrochlore aristotype, we systematically explore the structural potential-energy surface and recover the two known low-temperature phases alongside three new metastable phases, together with the transition pathways connecting them. This first-principles lattice-dynamics method is completely general and provides a practical means to identify and characterise the stable polymorphs and phase transitions in materials with complex crystal structures.
RESUMEN
Metal oxides can act as insulators, semiconductors, or metals depending on their chemical composition and crystal structure. Metal oxide semiconductors, which support equilibrium populations of electron and hole charge carriers, have widespread applications including batteries, solar cells, and display technologies. It is often difficult to predict in advance whether these materials will exhibit localized or delocalized charge carriers upon oxidation or reduction. We combine data from first-principles calculations of the electronic structure and dielectric response of 214 metal oxides to predict the energetic driving force for carrier localization and transport. We assess descriptors based on the carrier effective mass, static polaron binding energy, and Fröhlich electron-phonon coupling. Numerical analysis allows us to assign p- and n-type transport of a metal oxide to three classes: (i) band transport with high mobility; (ii) small polaron transport with low mobility; and (iii) intermediate behavior. The results of this classification agree with observations regarding carrier dynamics and lifetimes and are used to predict 10 candidate p-type oxides.
RESUMEN
Optoelectronic devices based on lead halide perovskites are processed in facile ways, yet are remarkably efficient. There are extensive research efforts investigating lead-free perovskite and perovskite-related compounds, yet there are challenges to synthesize these materials in forms that can be directly integrated into thin film devices rather than as bulk powders. Here, we report on the colloidal synthesis and characterization of lead-free, antifluorite Cs2ZrX6 (X = Cl, Br) nanocrystals that are readily processed into thin films. We use transmission electron microscopy and powder X-ray diffraction measurements to determine their size and structural properties, and solid-state nuclear magnetic resonance measurements reveal the presence of oleate ligand, together with a disordered distribution of Cs surface sites. Density functional theory calculations reveal the band structure and fundamental band gaps of 5.06 and 3.91 eV for Cs2ZrCl6 and Cs2ZrBr6, respectively, consistent with experimental values. Finally, we demonstrate that the Cs2ZrCl6 and Cs2ZrBr6 nanocrystal thin films exhibit tunable, broad white photoluminescence with quantum yields of 45% for the latter, with respective peaks in the blue and green spectral regions and mixed systems exhibiting properties between them. Our work represents a critical step toward the application of lead-free Cs2ZrX6 nanocrystal thin films into next-generation light-emitting applications.
RESUMEN
Cu2BaSnS4 (CBTS) and Cu2SrSnS4 (CSTS) semiconductors have been recently proposed as potential wide band gap photovoltaic absorbers. Although several measurements indicate that they are less affected by band tailing than their parent compound Cu2ZnSnS4, their photovoltaic efficiencies are still low. To identify possible issues, we characterize CBTS and CSTS in parallel by a variety of spectroscopic methods complemented by first-principles calculations. Two main problems are identified in both materials. The first is the existence of deep defect transitions in low-temperature photoluminescence, pointing to a high density of bulk recombination centers. The second is their low electron affinity, which emphasizes the need for an alternative heterojunction partner and electron contact. We also find a tendency for downward band bending at the surface of both materials. In CBTS, this effect is sufficiently large to cause carrier-type inversion, which may enhance carrier separation and mitigate interface recombination. Optical absorption at room temperature is exciton-enhanced in both CBTS and CSTS. Deconvolution of excitonic effects yields band gaps that are about 100 meV higher than previous estimates based on Tauc plots. Although the two investigated materials are remarkably similar in an idealized, defect-free picture, the present work points to CBTS as a more promising absorber than CSTS for tandem photovoltaics.
RESUMEN
The van der Waals material GeSe is a potential solar absorber, but its optoelectronic properties are not yet fully understood. Here, through a combined theoretical and experimental approach, the optoelectronic and structural properties of GeSe are determined. A fundamental absorption onset of 1.30 eV is found at room temperature, close to the optimum value according to the Shockley-Queisser detailed balance limit, in contrast to previous reports of an indirect fundamental transition of 1.10 eV. The measured absorption spectra and first-principles joint density of states are mutually consistent, both exhibiting an additional distinct onset â¼0.3 eV above the fundamental absorption edge. The band gap values obtained from first-principles calculations converge, as the level of theory and corresponding computational cost increases, to 1.33 eV from the quasiparticle self-consistent GW method, including the solution to the Bethe-Salpeter equation. This agrees with the 0 K value determined from temperature-dependent optical absorption measurements. Relaxed structures based on hybrid functionals reveal a direct fundamental transition in contrast to previous reports. The optoelectronic properties of GeSe are resolved with the system described as a direct semiconductor with a 1.30 eV room temperature band gap. The high level of agreement between experiment and theory encourages the application of this computational methodology to other van der Waals materials.
RESUMEN
Metal-organic frameworks (MOFs) have shown great promise for sensing of dangerous chemicals, including environmental toxins, nerve agents, and explosives. However, challenges remain, such as the sensing of larger analytes and the discrimination between similar analytes at different concentrations. Herein, we present the synthesis and development of a new, large-pore MOF for explosives sensing and demonstrate its excellent sensitivity against a range of relevant explosive compounds including trinitrotoluene and pentaerythritol tetranitrate. We have developed an improved, thorough methodology to eliminate common sources of error in our sensing protocol. We then combine this new MOF with two others as part of a three-MOF array for luminescent sensing and discrimination of five explosives. This sensor works at part-per-million concentrations and, importantly, can discriminate explosives with high accuracy without reference to their concentration.
RESUMEN
LiCoO2 is the prototypical cathode in lithium-ion batteries. Its crystal structure consists of Li+ and CoO2- layers that alternate along the hexagonal ⟨0001⟩ axis. It is well established that the ionic and electronic conduction are anisotropic, but little is known regarding the heat transport. We analyze the phonon dispersion and lifetimes using anharmonic lattice dynamics based on quantum-chemical force constants. Around room temperature, the thermal conductivity in the hexagonal ab plane of the layered cathode is â¼6 times higher than that along the c axis. An upper limit to the average thermal conductivity at T = 300 K of 38.5 W m-1 K-1 is set by short phonon lifetimes associated with anharmonic interactions within the octahedral face-sharing CoO2- network. Observations of conductivity <10 W m-1 K-1 can be understood by additional scattering channels including grain boundaries in polycrystalline samples. The impact on thermal processes in lithium-ion batteries is discussed.
RESUMEN
We demonstrate that the optical absorption of the vacancy-ordered triple perovskite, Cs3Bi2Br9, can be significantly red-shifted by substituting Br with I while maintaining the layered structural topology. We also present evidence that Br ions prefer to occupy the bridging halide position within the layers in order to minimize strain within the lattice that results from the incorporation of the significantly larger iodide anions into the lattice. These results not only quantify the upper limit for I content in the layered polymorph, but also establish the minimum band gap obtainable from these Bi-based phases.
RESUMEN
The earth-abundant semiconductor Cu3BiS3 (CBS) exhibits promising photovoltaic properties and is often considered analogous to the solar absorbers copper indium gallium diselenide (CIGS) and copper zinc tin sulfide (CZTS) despite few device reports. The extent to which this is justifiable is explored via a thorough X-ray photoemission spectroscopy (XPS) analysis: spanning core levels, ionization potential, work function, surface contamination, cleaning, band alignment, and valence-band density of states. The XPS analysis overcomes and addresses the shortcomings of prior XPS studies of this material. Temperature-dependent absorption spectra determine a 1.2 eV direct band gap at room temperature; the widely reported 1.4-1.5 eV band gap is attributed to weak transitions from the low density of states of the topmost valence band previously being undetected. Density functional theory HSE06 + SOC calculations determine the band structure, optical transitions, and well-fitted absorption and Raman spectra. Valence band XPS spectra and model calculations find the CBS bonding to be superficially similar to CIGS and CZTS, but the Bi3+ cations (and formally occupied Bi 6s orbital) have fundamental impacts: giving a low ionization potential (4.98 eV), suggesting that the CdS window layer favored for CIGS and CZTS gives detrimental band alignment and should be rejected in favor of a better aligned material in order for CBS devices to progress.