Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Más filtros

Banco de datos
Tipo de estudio
Tipo del documento
País de afiliación
Intervalo de año de publicación
1.
Sci Rep ; 14(1): 10766, 2024 May 10.
Artículo en Inglés | MEDLINE | ID: mdl-38730028

RESUMEN

In this work, we study the efficiency of N1, N3-dibenzyl-N1, N1, N3, N3-tetramethylpropane-1,3-diaminium chloride, as anticorrosion. This compound exhibits potential as a prospective remedy to stop the deterioration of carbon steel caused by corrosion in 1.0 M HCl. The synthesis of this compound is described in a comprehensive manner, and its composition is supported by a range of precise analytical approaches such as elemental analysis, and mass spectroscopy. Based on the findings of the investigation, the synthesized Gemini ionic liquid demonstrates a robust capacity to slow down the rate at which the metal corrodes. The Prepared compound was evaluation by electrochemical and morphology study. Our results revealed that elevating the inhibitor concentration led to an augmentation in inhibition effectiveness, reaching up to 94.8% at 200 ppm of the synthesized compound at 298 K. It is crucial to emphasize that the recently prepared Gemini ionic liquid is consistent with the Langmuir adsorption model and function as a mixed inhibitor, participating in the physio-chemisorption process of adsorption.

2.
Chemosphere ; 210: 102-109, 2018 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-29986215

RESUMEN

The effects of the high voltage electrode material, initial pH of the solution, initial concentration of Fe2+, and time of plasma treatment on the efficiency of Acid Orange 142 (AO142) degradation were studied and evaluated. Furthermore, based on the Box-Behnken response surface methodology (BBD-RSM), a model between response (decolorization efficiency %) and influencing factors was proposed to estimate the interactive effects and optimize the process conditions. The proposed model was adequate with an R2 of 0.8005 which is in reasonable agreement with the R2adj of 0.9307. According to the model, the optimum conditions were steel as a high voltage electrode, an initial pH 3.0, an initial Fe2+ concentration 0.9 mM, and 20 min time of treatment to obtain a decolorization efficiency of 95.05%. In addition, the analytical results of UV-Vis, FT-IR, TOC and GC-MS indicated the degradation of the dye molecule.


Asunto(s)
Compuestos Azo/química , Colorantes/química , Restauración y Remediación Ambiental/métodos , Peróxido de Hidrógeno/química , Concentración de Iones de Hidrógeno , Análisis Espectral , Contaminantes Químicos del Agua/química
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA