Influence of soft tissue thickness on marginal bone level around dental implants: A systematic review with meta-analysis and trial-sequential analysis.

OBJECTIVES: The aim of the present review and meta-analysis was to evaluate the influence of soft tissue thickness on initial bone remodeling after implant installation. MATERIALS AND METHODS: A literature search was conducted by two independent reviewers on electronic databases up to May 2022. Randomized controlled trials (RCTs) and controlled clinical trials (CCTs) performed on human subjects were included. The risk of bias was evaluated using Cochrane Collaboration's tool. Meta-analysis and Trial Sequential Analysis (TSA) were performed on the selected articles. The primary outcome was marginal bone loss. RESULTS: After screening, 6 studies were included in the final analysis, with a total of 354 implants, and a follow-up from 10 to 14 months. 194 implants were placed in a ≥ 2 mm soft tissue thickness, while 160 had <2 mm soft tissue thickness before implant placement. The included studies had a high level of heterogeneity (I2  > 50%). The meta-analysis indicated a statistically significant difference between the two groups (0.54; p = .027) and the TSA analysis confirmed the results, despite the limited number of dental implants. Additional analysis showed that age and follow-up parameters were not statistically significant factors influencing the bone loss (p = .22 and p = .16, respectively). CONCLUSIONS: Based on the available RCTS and CCTs, initial soft tissue thickness seems to influence marginal bone loss after a short follow-up period. Based on TSA analysis, further studies are needed to assess the influence of the soft tissue thickness on marginal bone loss. PROSPERO registration number: CRD42021235324.

"Diagnostic ability in oral pathology among different population clusters".

OBJECTIVES: To assess the diagnostic ability in detecting oral lesions among dentists, dental hygienists, dentistry students, oral hygiene students, and non-healthcare subjects. MATERIALS AND METHODS: Participants were invited to classify 30 images of oral lesions in "benign" or "suspected malignant" only based on the visual appearance of the lesion. Diagnostic accuracy was assessed by calculating sensitivity and specificity with 95% confidence intervals and stratified by population group and image features (color, shape, and size of the lesions). RESULTS: A total of 16,590 examinations by 553 subjects were analyzed. Overall sensitivity and specificity were 57% (95% confidence interval 56%-58%) and 64% (95% confidence interval 63%-65%). Diagnostic accuracy varied among population groups, with experienced dentists showing the lowest sensitivity (52%) and the highest specificity (71%). Red lesions, flat lesions, and large lesions had the lowest sensitivity (42%, 36%, 57%) but the highest specificity (70%, 75%, 76%). CONCLUSIONS: We found worrying low ability to detect suspected malignant oral lesions by both healthcare workers and non-healthcare subjects. Lesion-specific characteristics may lead to differences in recognition. Specific courses and more adequate teaching methods should be proposed to increase identification of oral lesions.

Influence of abutment material on peri-implant soft tissues in anterior areas with thin gingival biotype: a multicentric prospective study.

PURPOSE: The aim of the present clinical trial was to analyze, through spectrophotometric digital technology, the influence of the abutment material on the color of the peri-implant soft tissue in patients with thin gingival biotype. MATERIAL AND METHODS: Thirty-seven patients received an endosseous dental implant in the anterior maxilla. At time of each definitive prosthesis delivery, an all-ceramic crown has been tried on gold, titanium and zirconia abutment. Peri-implant soft-tissue color has been measured through a spectrophotometer after the insertion of each single abutment. Also facial peri-implant soft-tissue thickness was measured at the level of the implant neck through a caliper. A specific software has been utilized to identify a standardized tissue area and to collect the data before the statistical analysis in Lab* color space. ΔE parameters of the selected abutments were tested for correlation with mucosal thickness. Pearson correlation test was used. RESULTS: Only 15 patients met the study inclusion criteria on peri-implant soft-tissue thickness. Peri-implant soft-tissue color was different from that around natural teeth, no matter which type of restorative material was selected. Measurements regarding all the abutments were above the critical threshold of ΔE 8.74 for intraoral color distinction by the naked eye. The ΔE mean values of gold and zirconium abutments were similar (11.43 and 11.37, respectively) and significantly lower (P = 0.03 and P = 0.04, respectively) than the titanium abutment (13.55). In patients with a facial soft-tissue thickness ≤2 mm, the ΔE mean value of gold and zirconia abutments was significantly lower than that of titanium abutments (P = 0.03 and P = 0.04, respectively) and much more close to the reference threshold of 8.74. CONCLUSIONS: For peri-implant soft tissue of ≤2 mm, gold or zirconia abutments could be selected in anterior areas treatment. Moreover, the thickness of the peri-implant soft tissue seemed to be a crucial factor in the abutment impact on the color of soft tissues with a thickness of ≤2 mm.

Simplified procedure for the immediate loading of a complete fixed prosthesis supported by four implants in the maxillary jaw: a 2-year prospective study.

PURPOSE: The aim of this study was to verify the reliability of a system for the fixed retention of complete maxillary prostheses supported by four implants with a follow-up of 2 years. MATERIAL AND METHODS: Patients were treated between September 2009 and December 2010 with four Straumann Bone Level SLActive implants supporting a complete prosthesis (CPs). The two distal implants were positioned mesially to the maxillary sinus and with a mesio-distal inclination ≤ 30° in order to reduce the distal prosthesis cantilever. An immediate loading surgical protocol was used. The CPs were planned to be fixed to multibase abutments to test their retention for a fixed rehabilitation. Clinical and radiographic parameters as probing pocket depth (PPD), bleeding score (mBI), plaque index (PI), and marginal bone loss (MBL) were assessed at a 1- and 2-year follow-up visits. Moreover, any biological and prosthodontic maintenance events were recorded. Clinical and radiographic parameters changes were analyzed. RESULTS: Twenty-one patients treated with a total of 84 implants completed the 2-year examination period. Four patients were lost to follow up. No technical complication was recorded. Also, no implant, reconstruction, or abutment failures were observed. Therefore, an implant and prosthetic survival rate of 100% were achieved after 2 years. The mean periodontal parameter scores after 2 years of function were 2.6 mm for PPD (SD 0.8 mm), 0.3 for mBI (SD 0.5 mm), and 1.2 for PI (SD 0.4 mm) indexes, respectively. In addition, the mean MBL score measured at the 2-year follow-up visit was -0.34 mm (SD of -0.45 mm). Furthermore, no peri-implant soft tissue inflammation or peri-implant infection was observed. CONCLUSIONS: It has been shown that immediate loading of four implants positioned anteriorly to the maxillary sinus could be a reliable treatment procedure to support fixed complete restorations.

Reproducibility of Buccal Gingival Profile Using a Custom Pick-Up Impression Technique: A 2-Year Prospective Multicenter Study.

PURPOSE: The aim of this study was to transfer the provisional restoration emergence profile to the final implant-supported restoration and to buccal gingival margin (BGM) stability after 2 years of function. MATERIALS AND METHODS: A total of 33 patients were recruited for treatment of single gaps by means of 33 implant-supported restorations. Fixed provisional crowns were screwed to the fixture and adjusted until the complete peri-implant soft tissue maturation was achieved. After 12 weeks, a second fixture impression was taken by means of a pick-up customization technique in order to transfer the clinical aspect of the peri-implant soft tissues to the master cast. A definitive restoration was delivered. A standardized method from digital photographs was used to assess the gingival margin modification (BGM) from the provisional (P) to the definitive prosthesis installation at baseline (D0), and after 1 (D1) and 2 years (D2) of function. Also, marginal bone loss (MBL) was calculated after 1 (D1) and 2 years (D2) of definitive restoration function. RESULTS: The BGM index at the time of the final restoration installation (D0) was 0.12 ± 0.33 mm if compared with the BGM position of the provisional restoration (P); it was of 0.12 ± 0.46 mm after 1-year of follow-up (D1) and of 0.31 ± 0.21 after 2 years of function (D2). No significant difference was calculated between measurements in different follow-up visits (p > 0.05). No significant MBL was measured between the baseline (D0) and the 1-year follow-up (p = 0.816) with a mean MBL value of 0.2 ± 0.1 mm. Similar result was calculated after 2 years (p = 0.684) with a mean MBL value of 0.3 ± 0.2. CONCLUSION: A modified impression pick-up may be helpful to reproduce the gingival margin position from the provisional to the definitive restoration. Moreover, the gingival zenith position during the follow-up period seemed to be stable. CLINICAL SIGNIFICANCE: The modification of the standard impression pick-up technique may contribute to reproducing a natural emergence profile of esthetic implant prosthetic restorations (from the provisional to the definitive restoration.) With this technique, implant soft tissues stability around CAD-CAM (computer aided design-computer aided manufacturing) abutments can be easily obtained, and the customized abutment shape may better support the scalloped peri-implant soft tissues architecture, especially in anterior areas.

Soft tissues stability of cad-cam and stock abutments in anterior regions: 2-year prospective multicentric cohort study.

AIM: Aim of this study was to verify if the type of implant abutment manufacturing, stock or cad-cam, could influence the maintenance of stable gingival margins around single restorations in anterior areas. METHODS: After 16 weeks of healing, implants (Osseospeed, Astra Tech Dental Implant) were positioned. Depending on the different fixture inclination and the thickness of buccal peri-implant soft tissue, abutment selection resulted in four groups: Group 1 (patients with zirconia ZirDesign(®) stock abutments), Group 2 (titanium stock TiDesign(®) abutments), Group 3 (zirconia cad-cam abutments), and Group 4 (titanium cad-cam abutments). The following parameters were assessed: buccal gingival margin modification (BGM). The modification of the implant gingival margin was followed at 1 and 2 years of follow-up. A computerized analysis was performed for measurements. Differences between soft tissue margin at baseline and after 2 years measured the gingival margin recession. A general linear model was used to evaluate each group in relation to gingival recession after two years. Tukey's post hoc test was used to compare the mean REC indexes of each group of abutments. RESULTS: Seventy-two healthy patients (39 males and 33 females; mean age of 46 years) scheduled for single gap rehabilitation in anterior areas were enrolled. A 100% of implant survival rate was observed after 24 months of function. One failure occurred due to fracture of a Zirconia cad-cam abutment. Moreover, two abutment screw unscrewing were observed. Both for zirconia and titanium stock abutments (Group 1 and 2), the mean recession of implant buccal soft tissue was of 0.3 mm (SD of 0.3 and 0.4 mm, respectively). Soft tissue mean recession of zirconia and titanium cad-cam abutments (Group 3 and 4) was of 0.1 and -0.3 mm, respectively (SD of 0.3 and 0.4 mm, respectively). REC values of cad-cam titanium abutments (Group 4) were significantly lower than that of Group 1 (-0.57 mm), Group 2 (-0.61 mm), and Group 3 (-0.40 mm), respectively (Table 4). CONCLUSION: In the anterior area, the use of cad-cam abutments is related to a better soft tissue stability. Such a relationship is significant if cad-cam titanium abutments are compared to both titanium and zirconia stock abutments.

Immediate loading of implants installed in a healed alveolar bony ridge or immediately after tooth extraction: an experimental study in dogs.

OBJECTIVE: To compare the sequential healing at immediately loaded implants installed in a healed alveolar bony ridge or immediately after tooth extraction. MATERIAL AND METHODS: In the mandible of 12 dogs, the second premolars were extracted. After 3 months, the mesial roots of the third premolars were endodontically treated and the distal roots extracted. Implants were placed immediately into the extraction sockets (test) and in the second premolar region (control). Crowns were applied at the second and third maxillary premolars, and healing abutments of appropriate length were applied at both implants placed in the mandible and adapted to allow occlusal contacts with the crowns in the maxilla. The time of surgery and time of sacrifices were planned in such a way to obtain biopsies representing the healing after 1 and 2 weeks and 1 and 3 months. Ground sections were prepared for histological analyses. RESULTS: At the control sites, a resorption of the buccal bone of 1 mm was found after 1 week and remained stable thereafter. At the test sites, the resorption was 0.4 mm at 1-week period and further loss was observed after 1 month. The height of the peri-implant soft tissue was 3.8 mm both at test and control sites. Higher values of mineralized bone-to-implant contact and bone density were seen at the controls compared with the test sites. The differences, however, were not statistically significant. CONCLUSIONS: Different patterns of sequential early healing were found at implants installed in healed alveolar bone or in alveolar sockets immediately after tooth extractions. However, three months after implant installation, no statistically significant differences were found for the hard- and soft-tissue dimensions.

Graphene based scaffolds effects on stem cells commitment.

Graphene is a flat monolayer of carbon atoms, arranged in a two-dimensional hexagonal structure, with extraordinary electrical, thermal, and physical properties. Moreover, the molecular structure of graphene can be chemically modified with molecules of interest to promote the development of high-performance devices. Although carbon derivatives have been extensively employed in industry and electronics, their use in regenerative medicine is still in an early phase. Study prove that graphene is highly biocompatible, has low toxicity and a large dosage loading capacity. This review describes the ability of graphene and its related materials to induce stem cells differentiation into osteogenic, neuronal, and adipogenic lineages.

Effect of chlorhexidine in preventing plaque biofilm on healing abutment: a crossover controlled study.

INTRODUCTION: The study aimed at evaluating the effect of chlorhexidine (CHX) in preventing plaque biofilm (PB) formation on healing abutments (HAs) in patients rehabilitated with osseointegrated implants. MATERIALS AND METHODS: Fifty HAs were placed in 34 voluntary patients 1 week after implant surgery (test group). After 7 days, a new set of 50 HAs was placed in the same implant sites and removed 1 week after (control group). During the 2 testing periods, patients were instructed to apply: CHX mouth rinsing twice daily and no brushing (test); no CHX mouth rinsing and no brushing (control). Scanning electron microscopy and image analysis were blindly used to objectively quantify PB amount on removed HAs. RESULTS: Median values and interquartile ranges of the percent ratio of titanium surface covered from PB were 0.9 (0.1-4.1) and 1.2 (0.1-11.6) for test and control groups, respectively (P = 0.0275). CONCLUSIONS: CHX mouth rinsing significantly limited plaque formation on HAs, being a valid contribution to mechanical brushing in early phases of plaque control on dental implants.

Antibiotic-Prescribing Habits in Dentistry: A Questionnaire-Based Study.

The problem of antibiotic resistance is becoming increasingly serious worldwide due to uncontrolled prescription. Dentists are among the groups that prescribe the most antibiotics, often to delay urgent treatment. The purpose of the present study is to investigate the prescribing protocols adopted by dentists for prophylaxis and antibiotic therapy in major clinical surgical indications. METHODS: A ten-question survey was administered to a group of Italian dentists. The participants were asked about their preferences for antibiotic administration for the prevention of infective endocarditis, the administration of antibiotics to patients allergic to penicillin, the insertion of implants, and the extraction of third molars. The retrieved data were screened and analyzed. RESULTS: A total of 298 surveys were filled out. The most-prescribed antibiotic was amoxicillin or amoxicillin with clavulanic acid or macrolides for allergic patients. The administration of two grams of amoxicillin one hour before surgery was the most widely used prescriptive protocol for prophylaxis. International guidelines on antibiotic prophylaxis for infective endocarditis were only partially followed. The most heterogeneous results emerged for prophylaxis associated with dental implants or provided prior to surgical third-molar extraction. CONCLUSIONS: The present study shows widespread antibiotic prescriptive heterogeneity among the sample of dentists analyzed, especially in conditions where international guidelines are lacking. An evidence-based consensus on prescriptive modalities in dentistry would be desirable in the near future.

Managing the peri-implant mucosa: a clinically reliable method for optimizing soft tissue contours and emergence profile.

STATE OF THE PROBLEM: The proper representation of soft tissue contours for a natural aspect of the peri-implant mucosa and its mimesis with the adjacent teeth is a crucial aspect of the esthetic area restoration. PURPOSE: This paper describes a method for the easy transfer of the peri-implant tissue morphology onto impression material with a view to achieving an accurate, custom implant restoration. The procedure described is suitable both for single and multi-unit implant-supported prostheses. CLINICAL PROCEDURES: Once the peri-implant mucosa is sculpted by the provisional restoration, the emergence profile is duplicated. The implant analog is embedded into laboratory stone or plaster in a mixing cup and allowed to set. The provisional restoration is removed from the oral cavity and screwed to the implant analog; then, a polyether material is placed in the mixing cup so that the provisional restoration is put into impression material at the level of the prosthetic emergence profile. After the polyether polymerizing, the provisional prosthesis is unscrewed and replaced with the stock hexed transfer for the final impression. Next, cold self-curing resin is poured into this gap and left to set. A custom transfer for this single implant site is thus obtained. This modified transfer is then removed and screwed onto the implant in the oral cavity for the definitive impression. CONCLUSIONS: The technique described enables a faithful reproduction of the peri-implant soft tissues and emergence profile. CLINICAL SIGNIFICANCE: An emergence profile that mimics the natural tooth should be obtained by successful esthetic implant restoration. Moreover, it allows proper hygiene, which is fundamental for implant maintenance. The best way to achieve the correct emergence profile is to sculpture the peri-implant mucosa by means of a provisional prosthesis. Prefabricated provisional crowns cannot mimic the complexity and the variations of human soft tissue. Therefore, only a chair-side modification of the provisional restoration can accomplish the optimal result. Such a requirement can be satisfied by the clinical method described in the present report.

Nanostructured surfaces of dental implants.

The structural and functional fusion of the surface of the dental implant with the surrounding bone (osseointegration) is crucial for the short and long term outcome of the device. In recent years, the enhancement of bone formation at the bone-implant interface has been achieved through the modulation of osteoblasts adhesion and spreading, induced by structural modifications of the implant surface, particularly at the nanoscale level. In this context, traditional chemical and physical processes find new applications to achieve the best dental implant technology. This review provides an overview of the most common manufacture techniques and the related cells-surface interactions and modulation. A Medline and a hand search were conducted to identify studies concerning nanostructuration of implant surface and their related biological interaction. In this paper, we stressed the importance of the modifications on dental implant surfaces at the nanometric level. Nowadays, there is still little evidence of the long-term benefits of nanofeatures, as the promising results achieved in vitro and in animals have still to be confirmed in humans. However, the increasing interest in nanotechnology is undoubted and more research is going to be published in the coming years.

Bleeding Disorders and Dental Implants: Review and Clinical Indications.

BACKGROUND: Bleeding disorders can be divided into three categories: congenital coagulation disorders (CCDs), antiplatelet-induced bleeding disorders (APBDs) and anticoagulant-induced bleeding disorders (ACBDs). Implant placement can be challenging in these kinds of patients. The aim of this study is to provide evidence on implant surgery in patients with bleeding disorders and to generate some practical recommendations for clinicians. MATERIAL AND METHODS: Pubmed/MEDLINE, Scopus, Web of Science and Cochrane Library databases were screened. The latest search was performed in July 2022. Case reports, case series, cohort studies, cross-sectional studies, case control studies, reviews, consensus reports, surveys and animal studies were included in the analysis. RESULTS: Seventeen articles on CCDs were found, fourteen on APBDs and twenty-six on ACBDs. Most of these articles were case reports or case series. Patients with CCDs can be treated after the infusion of the missing coagulation factor. Patients with APBDs can be treated without withdrawing the therapy. Patients with ACBDs should be treated depending on the anticoagulative medication. CONCLUSION: Despite the low level of evidence, dental implants can be safely placed in patients with bleeding disorders. However, careful preoperative evaluation and the adoption of local and post-operative bleeding control measures are mandatory.

Efficacy of different mouthwashes against COVID-19: A systematic review and network meta-analysis.

To evaluate the effectiveness of antiseptic mouthwashes in reducing SARS-CoV-2 load clinically and in vitro. A systematic electronic search (MEDLINE/Scopus/Cochrane) was conducted to identify prospective clinical and in vitro studies published between 2019 included and 16 June 2023 assessing the effectiveness of mouthwashes in reducing SARS-CoV-2 load in saliva or surrogates. Data were summarized in tables and a network meta-analysis was performed for clinical trials. Thirty-five studies (14 RCTs, 21 in vitro) fulfilled the inclusion criteria. The risk of bias was judged to be high for 2 clinical and 7 in vitro studies. The most commonly test product was chlorhexidine alone or in combination with other active ingredients, followed by povidone-iodine, hydrogen peroxide and cetylpyridinium chloride. Overall, the descriptive analysis revealed the effectiveness of the mouthwashes in decreasing the salivary viral load both clinically and in vitro. Network meta-analysis demonstrated a high degree of heterogeneity. Among these studies, only chlorhexidine 0.20% was associated to a significant Ct increase in the saliva 5 min after rinsing compared to non-active control (p = 0.027). Data from clinical and in vitro studies suggested the antiviral efficacy of commonly used mouthwashes. Large well-balanced trials are needed to identify the best rinsing protocols.

The Follow-Up Necessity in Human Papilloma Virus-Positive vs. Human Papilloma Virus-Negative Oral Mucosal Lesions: A Retrospective Study.

Human papilloma virus (HPV) is known as the main cause of cervical cancer. Data also indicate its role in head-neck cancer, especially oropharyngeal cancer. The correlation between high-risk HPV and oral cancer is still controversial. HPV-related lesions of the oral cavity are frequent and, in most cases, benign. The primary aim of this study was to establish if there is a different follow-up necessity between HPV-positive compared to HPV-negative oral lesions. The secondary aim was to evaluate the recurrence of HPV-related lesions. All patients who underwent a surgical procedure of oral biopsy between 2018 and 2022, with ulterior histopathological examination and HPV typing, were examined. A total of 230 patients were included: 75 received traumatic fibroma as diagnosis, 131 HPV-related lesions, 9 proliferative verrucous leukoplakia, and 15 leukoplakia. The frequency and period of follow-up varied in relation to HPV positivity and diagnosis. This study confirms what has already been reported by other authors regarding the absence of recommendations of follow-up necessity in patients with oral mucosal lesions. However, the data demonstrate that there was a statistically significant difference in the sample analyzed regarding the follow-up of HPV-positive vs. HPV-negative patients. It also confirms the low recurrence frequency of HPV-related oral lesions.

Systemic Diseases and Biological Dental Implant Complications: A Narrative Review.

The relationship between periodontitis and such systemic disorders as diabetes, cardiovascular disease and obesity has been extensively investigated. There is less scientific evidence available, however, regarding the influence of systemic diseases on the risk of late failure of dental implant rehabilitation due to peri-implantitis. The aim of the present study was to review the literature on the role of several common systemic disorders (diabetes, obesity, cardiovascular disease, hypertension and osteoporosis) in the onset of peri-implantitis. A database search initially yielded 2787 studies of potential interest published up to 1 March 2022 (993 in PubMed; 908 in Web of Science; and 886 in Scopus). After removing 1190 duplicate articles and checking the titles, abstracts and full texts for relevance, 70 articles were selected for the present analysis. Only cohort, case-control studies and clinical case series were considered. Most of the literature concludes for no association between diabetes, cardiovascular disease, hypertension or osteoporosis and the risk of peri-implantitis. On the other hand, almost all the studies that investigated obesity as a risk factor for implant rehabilitation found a positive association between the two. Further longitudinal studies are needed to better understand the effects of systemic diseases on rehabilitation with dental implants.

Oral Hygiene in Adolescence: A Questionnaire-Based Study.

Oral health is fundamental to our well-being, especially in adolescence. The aim of this study is to investigate oral hygiene knowledge through a questionnaire in a sample of adolescents, paying particular attention to those wearing orthodontic braces. The study was designed as a descriptive report of a local survey. An anonymous questionnaire was distributed to individuals born between 2000 and 2005, both on paper and online. Among 213 adolescents answering the questionnaire, 206 went to the dentist at least once (most of them between 5 and 9 years old), and 144 experienced at least one session of professional oral hygiene. Approximately 83% of the sample brushed their teeth at least twice a day, while only 7% used dental floss daily. Only 54% of respondents wearing orthodontic braces were advised to undergo professional oral hygiene during their orthodontic treatment. Education on oral hygiene at home came only from their parents for 61% of the whole sample. Most respondents had their first visit to the dentist apparently too late. Flossing was rare, whether the adolescents wore orthodontic braces or not. In many cases, professional oral hygiene was not common during orthodontic treatment. Adolescents did not learn about oral hygiene from a dental specialist.

Guided implant surgery and sinus lift in severely resorbed maxillae: A retrospective clinical study with up to 10 years of follow-up.

OBJECTIVES: In the posterior maxilla, due to the presence of maxillary sinus, residual bone height lower than 3mm is a critical factor that can affect implant stability and survival. The use of guided surgery may facilitate the surgical procedures and the implant insertion in case of severely resorbed maxillae. Moreover, it may have beneficial effects on the long-term survival and success of implant-supported restorations. This study aimed to evaluate implant supported restorations on severely resorbed maxilla (<3 mm) after sinus lift with collagenated xenograft and guided surgery. METHODS: Forty-three patients with need for implant rehabilitation and residual bone height between 1 and 3 mm were recruited. Surgical and prosthetical aspects were planned following digital approach with the use of Realguide 5.0 (3diemme, Varese, Italy). Lateral window sinus lift was performed and implants were placed simultaneously to the augmentation procedure with a tooth-supported pilot drill surgical template. A pre-hydrated collagenated porcine bone matrix was adopted as regenerative material. Computer-aided-design/computer-aided-manufacturing (CAD/CAM) restorations were delivered after six months of healing. Milled titanium chamfer abutments with CAD/CAM crowns were used. Bone height at implant site level was measured using an image software analysis applied to the pre- and post-surgical radiographs and at the follow-up. Biological and technical complications were recorded during all the follow-up periods. RESULTS: Fifty-four sinus were treated. After a mean follow-up time of 5.11 years (SD: 2.47), no implants were lost nor showed signs of disease. The mean pristine bone height was 2.07 mm (SD: 075). At the final evaluation the augmented sinus height was 12.83 mm (SD: 1.23). Two cases experienced minor perforation of the membrane, while five patients developed minimal post-operative complications, completely resolved with pharmacologic therapy. No mid-term biological complications were experienced by the patients. No cases experienced peri-implant mucositis and peri-implantitis during the whole follow-up period. Four patients (7.4%) faced an unscrewing of the prosthesis. CONCLUSIONS: The present study showed the efficacy in the mid-term of the digital planning and the guided surgery in restoring severely resorbed posterior maxilla with dental implants. CLINICAL SIGNIFICANCE: This paper underlines the high potential of the digital approach in the mid-term to implant rehabilitation of severely resorbed maxilla simultaneously with sinus lift.

Marginal Bone Maintenance and Different Prosthetic Emergence Angles: A 3-Year Retrospective Study.

The aim of the present retrospective study was to assess marginal bone changes around implants restored with different prosthetic emergence profile angles. Patients were treated with implants supporting fixed dentures and were followed for 3 years. Marginal bone levels (MBL) measured at the prosthesis installation (t0) and at the 3-year follow-up visit (t1) were considered. The MBL change from t0 to t1 was investigated. Two groups were considered: Group 1 for restorations with an angle between implant axis and prosthetic emergence profile >30°, and Group 2 for those with an angle ≤30°, respectively. Moreover, peri-implant soft tissue parameters, such as the modified bleeding index (MBI) and plaque index (PI) were assessed. Seventy-four patients were included in the analysis and a total of 312 implants were examined. The mean EA in groups 1 and 2 was 45 ± 4 and 22 ± 7 degrees, respectively. The mean marginal bone level change (MBL change) of 0.06 ± 0.09 mm and 0.06 ± 0.10 mm were, respectively, in groups 1 and 2. The difference in the MBL change between the two groups was not statistically significant (p = 0.969). The MBL change does not seem to be influenced by the emergence angle for implants with a stable internal conical connection and platform-switching of the abutment diameter.

Mandibular Molar Uprighting Using Skeletal Anchorage: A Novel Approach.

BACKGROUND: The management of eruption anomalies affecting second molars, although quite uncommon, may represent a real challenge for the clinician. The aim of this study is to present a novel technique that combines the surgical and orthodontic approach in order to obtain the retrieval of impacted second molars through a complex distalizing movement and skeletal anchorage. METHODS: Nineteen consecutive patients with impacted second molars were treated according to this technique, which involved extraction of the third molar followed by the placement of a distally positioned screw, and the subsequent use of a coil spring to connect the screw to an eyelet directly bonded on the second molar. In selected cases, it proved to be necessary to reposition the second molar through traditional orthodontics. All of the parameters were recorded: the time required for completing the treatment, the initial angle between the second molar and the adjacent tooth, and treatment related-complications. RESULTS: Twenty impacted second molars were correctly repositioned. The mean initial angle of the second molar was 55.7° (SD 22.6°, min 13.3°, max 104.8°). The mean treatment time was 10 months. There were no major complications. CONCLUSIONS: Given that periodontal tissues were minimally affected, the temporary anchorage device was fully controlled, and there was no unwanted movement of adjacent teeth, the presented technique not only proved effective but also minimally invasive.