Quality of occlusal outcome in adult Class II patients treated with completely customized lingual appliances and Class II elastics compared to adult Class I patients.

OBJECTIVES: The aim of this investigation was to evaluate whether Class II malocclusion in adult patients can be successfully corrected using a completely customized lingual appliance (CCLA) in combination with Class II elastics. METHODS: In order to detect differences in the final treatment outcome, two groups were matched for age and gender. Treatment results of 40 adult orthodontic patients with a Class I malocclusion (Group 1) were compared to 40 adults with a Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without known centric occlusion-centric relation discrepancies, issues of compliance, or overcorrection in the individual treatment plan which was defined by a target set-up. In order to compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B) and compared to the individual target set-up (T2A). RESULTS: A statistically significant AP correction was achieved in Group 2 which represented 95% of the planned amount. The planned overbite correction was fully achieved in the Class I and Class II group. In both groups, there was a statistically significant improvement in the ABO scores, with no significant difference between the two groups at T2. 100% of the patients in Group 2 and 92.5% in Group 1 would meet the ABO standards after CCLA treatment. LIMITATIONS: The main limitation of this study is that only patients who were wearing the elastics as prescribed were retrospectively included. Therefore, the results of this study may have limited generalizability. CONCLUSIONS: Completely customized lingual appliances in combination with Class II elastics can correct a Class II malocclusion successfully in adult patients. The final treatment outcome can be of a similar high quality in Class I and Class II patients.

Quality of occlusal outcome in adult class II patients after maxillary total arch distalization with interradicular mini-screws.

BACKGROUND: The aim of the investigation was to evaluate if a Class II malocclusion in adult patients can be successfully corrected by maxillary total arch distalization with interradicular mini-screws in combination with completely customized lingual appliances (CCLA). METHODS: Two patient groups were matched for age and gender to determine differences in the quality of final treatment outcome. The treatment results of 40 adult patients with a Class I malocclusion (Group 1) were compared with those of 40 adult patients with a moderate to severe Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without overcorrection in the individual treatment plan defined by a target set-up. To compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B), and compared to the individual target set-up (T2A). RESULTS: A statistically significant AP correction (mean 4.5 mm, min/max 2.1/8.6, SD 1.09) was achieved in Group 2, representing 99% of the planned amount. The planned overbite correction was fully achieved in both the Class I and Class II groups. There was a statistically significant improvement in the ABO scores in both groups (Group 1: 39.4 to 17.7, Group 2: 55.8 to 17.1), with no significant difference between the two groups at T2B. 95% of the adult patients in Group 1 and 95% in Group 2 would meet the ABO standards after maxillary total arch distalization with a CCLA and interradicular mini-screws. CONCLUSIONS: CCLAs in combination with interradicular mini-screws for maxillary total arch distalization can successfully correct moderate to severe Class II malocclusions in adult patients. The quality of the final occlusal outcome is high and the amount of the sagittal correction can be predicted by the individual target set-up.

Accuracy and tracing time of cephalometric analyses on a tablet or desktop computer : A prospective study.

BACKGROUND: This prospective study aimed to evaluate the influence of the computer type (tablet or desktop) on accuracy and tracing time of cephalometric analyses. METHODS: Dental students used a web-based application specifically developed for this purpose to perform cephalometric analyses on tablet and desktop computers. Landmark locations and timestamps were exported to measure the accuracy, successful detection rate and tracing time. Reference landmarks were established by six experienced orthodontists. Statistical analysis included reliability assessment, descriptive statistics, and linear mixed effect models. RESULTS: Over a period of 8 semesters a total of 277 cephalometric analyses by 161 students were included. The interrater reliability of the orthodontists establishing the reference coordinates was excellent (ICC > 0.9). For the students, the mean landmark deviation was 2.05 mm and the successful detection rate for the clinically acceptable threshold of 2 mm suggested in the literature was 68.6%, with large variations among landmarks. No effect of the computer type on accuracy and tracing time of the cephalometric analyses could be found. CONCLUSION: The use of tablet computers for cephalometric analyses can be recommended.

Favourable dentoalveolar changes after lower premolar extractions for Class III camouflage with completely customized lingual appliances.

BACKGROUND: The aim of the investigation was to evaluate if the inclination of the lower anterior teeth can be controlled reliably after lower premolar extraction for Class III camouflage treatment with completely customized lingual appliances (CCLAs). Treatment outcome was tested against the null hypothesis that lower premolar extractions for non-surgical camouflage treatment of a Class III malocclusion will lead to further compensation by retroclining mandibular incisors during CCLA treatment. METHODS: This retrospective study included 25 patients (f/m 12/13; mean age 20.7 years, SD 9.5 years) with uni- or bilateral Class III molar relationship and a Wits value of ≤ -2 mm. In all consecutively debonded patients, lower premolars were extracted to correct the sagittal relationship with a non-surgical camouflage approach. Lateral head films prior to (T1) and at the end of lingual orthodontic treatment (T2) were used to evaluate skeletal and dentoalveolar effects. A paired t-test with alpha = 5% was used to define differences between the endpoints. The linear correlation between the inclination of the mandibular incisors at T1 and the achieved correction was measured with the Pearson correlation coefficient (PCC). A Schuirmann's TOST equivalence test was used to check if the final lower incisor inclination was within the defined norms. RESULTS: The null hypothesis was rejected as the mean lower incisor inclination was improved by 1.8° despite lower premolar extractions (T1: 86.8°/ T2: 88.6°). There was a strong correlation (-0.75) between the lower incisor inclination at T1 and the achieved correction indicating a controlled correction towards the norm regardless of the initial incisor position. At T2, the interincisal angle as well as the lower incisor inclination were within the norm. CONCLUSION: Lower premolar extractions for non-surgical camouflage treatment of a Class III malocclusion will not lead to undesired retroclining of mandibular incisors during CCLA treatment even in severe cases.

The Position of the Virtual Hinge Axis in Relation to the Maxilla in Digital Orthognathic Surgery Planning-A k-Means Cluster Analysis.

The aim of this study was to investigate a possible relation between skeletal phenotypes and virtual mounting data in orthognathic surgery patients. A retrospective cohort study including 323 female (26.1 ± 8.7 years) and 191 male (27.9 ± 8.3 years) orthognathic surgery patients was conducted. A k-means cluster analysis was performed on the mounting parameters: the angle α between the upper occlusal plane (uOP) and the axis orbital plane (AOP); the perpendicular distance (AxV) from the uOP to the hinge axis; and the horizontal length (AxH) of the uOP from upper incisor edge to AxV, with subsequent statistical analysis of related cepalometric values. Three clusters of mounting data were identified, representing three skeletal phenotypes: (1) balanced face with marginal skeletal class II or III and α=8∘, AxV = 36 mm and AxH = 99 mm; (2) vertical face with skeletal class II and α=11∘, AxV = 27 mm and AxH = 88 mm; (3) horizontal face with class III and α=2∘, AxV = 36 mm and AxH = 86 mm. The obtained data on the position of the hinge axis can be applied to any digital planning in orthognathic surgery using CBCT or a virtual articulator, provided that the case can be clearly assigned to one of the calculated clusters.

Non-Surgical Transversal Dentoalveolar Compensation with Completely Customized Lingual Appliances versus Surgically Assisted Rapid Palatal Expansion in Adults-Tipping or Translation in Posterior Crossbite Correction?

The aim of this study was to investigate buccolingual tooth movements (tipping/translation) in surgical and nonsurgical posterior crossbite correction. A total of 43 patients (f/m 19/24; mean age 27.6 ± 9.5 years) treated with surgically assisted rapid palatal expansion (SARPE) and 38 patients (f/m 25/13; mean age 30.4 ± 12.9 years) treated with dentoalveolar compensation using completely customized lingual appliances (DC-CCLA) were retrospectively included. Inclination was measured on digital models at canines (C), second premolars (P2), first molars (M1), and second molars (M2) before (T0) and after (T1) crossbite correction. There was no statistically significant difference (p > 0.05) in absolute buccolingual inclination change between both groups, except for the upper C (p < 0.05), which were more tipped in the surgical group. Translation, i.e., bodily tooth movements that cannot be explained by pure uncontrolled tipping, could be observed with SARPE in the maxilla and with DC-CCLA in both jaws. Dentoalveolar transversal compensation with completely customized lingual appliances does not cause greater buccolingual tipping compared to SARPE.

Non-Surgical Transversal Dentoalveolar Compensation with Completely Customized Lingual Appliances versus Surgically Assisted Rapid Palatal Expansion in Adults-The Amount of Posterior Crossbite Correction.

The aim of this study was to compare the crossbite correction of a group (n = 43; f/m 19/24; mean age 27.6 ± 9.5 years) with surgically assisted rapid palatal expansion (SARPE) versus a non-surgical transversal dentoalveolar compensation (DC) group (n = 38; f/m 25/13; mean age 30.4 ± 12.9 years) with completely customized lingual appliances (CCLA). Arch width was measured on digital models at the canines (C), second premolars (P2), first molars (M1) and second molars (M2). Measurements were obtained before treatment (T0) and at the end of lingual treatment (T1) or after orthodontic alignment prior to a second surgical intervention for three-dimensional bite correction. There was no statistically significant difference (p > 0.05) in the amount of total crossbite correction between the SARPE and DC-CCLA group at C, P2, M1 and M2. Maxillary expansion was greater in the SARPE group and mandibular compression was greater in the DC-CCLA group. Crossbite correction in the DC-CCLA group was mainly a combination of maxillary expansion and mandibular compression. Dentoalveolar compensation with CCLAs as a combination of maxillary expansion and mandibular compression seems to be a clinically effective procedure to correct a transverse maxillo-mandibular discrepancy without the need for surgical assistance.