Effect of Vehicle Composition on the Preparation of Different Types of Dapsone Crystals for Topical Drug Delivery.

Topical formulations composed of API-pure crystals have been increasingly studied, especially in regards to the impact of particle size in penetration efficiency. Less attention, however, has been devoted to the solid-state properties of drugs delivered to the skin. In this study, we address the effect of formulation composition on the crystal form existing in topical products. Dapsone (DAP) gel formulations were prepared by mixing an organic solution containing DAP with an aqueous solution containing polymers and preservatives. The organic solvent was chosen as ethoxydiglycol (DEGEE), polyethylene glycol (PEG), or 1-methyl-2-pirrolidone (MPR) to assess the impact of composition on DAP crystal form. Such solvent variations resulted in different particulate matter. In terms of crystalline nature, the presence of DEGEE in formulations induced the crystallization of DAP hydrate, while PEG cocrystal and a mixture of hydrate and MPR solvate crystallized from the same amounts of PEG and MPR, respectively. Microscopic analysis of the gels showed heterogeneous particles with different characteristics. The behavior of gels after application to the skin was also tested. Interestingly, the different formulations seemed to accumulate in different regions of the skin. This could be the result of the effect of vehicle composition/excipients on the characteristics of the skin, such as hydration. The site-specific accumulation, however, was more pronounced in crystal-loaded gels as opposed to blank formulations. These results indicate that future studies should consider the effect of formulation composition on the API crystal form landscape as part of the strategies used to successfully target drug delivery to the skin.

Implications of the Conformationally Flexible, Macrocyclic Structure of the First-Generation, Direct-Acting Anti-Viral Paritaprevir on Its Solid Form Complexity and Chameleonic Behavior.

Direct-acting antiviral regimens have transformed therapeutic management of hepatitis C across all prevalent genotypes. Most of the chemical matter in these regimens comprises molecules well outside the traditional drug development chemical space and presents significant challenges. Herein, the implications of high conformational flexibility and the presence of a 15-membered macrocyclic ring in paritaprevir are studied through a combination of advanced computational and experimental methods with focus on molecular chameleonicity and crystal form complexity. The ability of the molecule to toggle between high and low 3D polar surface area (PSA) conformations is underpinned by intramolecular hydrogen bonding (IMHB) interactions and intramolecular steric effects. Computational studies consequently show a very significant difference of over 75 Å2 in 3D PSA between polar and apolar environments and provide the structural basis for the perplexingly favorable passive permeability of the molecule. Crystal packing and protein binding resulting in strong intermolecular interactions disrupt these intramolecular interactions. Crystalline Form I benefits from strong intermolecular interactions, whereas the weaker intermolecular interactions in Form II are partially compensated by the energetic advantage of an IMHB. Like Form I, no IMHB is observed within the receptor-bound conformation; instead, an intermolecular H-bond contributes to the potency of the molecule. The choice of metastable Form II is derisked through strategies accounting for crystal surface and packing features to manage higher form specific solid-state chemical reactivity and specific processing requirements. Overall, the results show an unambiguous link between structural features and derived properties from crystallization to dissolution, permeation, and docking into the protein pocket.

Emerging Technologies to Target Drug Delivery to the Skin - the Role of Crystals and Carrier-Based Systems in the Case Study of Dapsone.

Dapsone (DAP) is a long-established molecule that remains a promising therapeutic agent for various diseases mainly because it combines antimicrobial and anti-inflammatory activities. Its oral application, however, is limited by the dose-dependent hematological side effects that may rise from systemic exposure. As an alternative to overcome this limitation, the administration of DAP to the skin has witnessed prominent interest in the past 20 years, particularly when applied to the treatment of dermatological disorders. In this review, all technological strategies proposed to the topical delivery of DAP are presented. Most of the reported studies have been devoted to the clinical use and safety of a gel formulation containing both solubilized and microcrystalline drug, however, the technological characteristics of such preparation are still missing. In parallel, the incorporation of DAP into vesicular and particulate carriers (e.g. nano- and microemulsions, niosomes, invasomes, bilosomes, cubosomes, solid lipid nanoparticles, nanostructured lipid carriers, polymeric nanocapsules and polymer-lipid-polymer hybrid nanoparticles) appears to be an alternative to provide greater drug release control, enhanced drug solubilization and follicular targeting. Indeed, the main application of DAP topical formulations reported in the literature was the treatment of acne vulgaris, a disease located in the hair follicle. Other diseases affecting different regions of the skin (e.g. cutaneous lupus erythematosus and cutaneous leishmaniasis), however, may also benefit from a topical therapeutic regimen containing DAP. Therefore, the investigation of appendageal route in comparison to passive transmembrane diffusion as a function of targeted disease, as well as pharmacokinetic studies, are perspectives highlighted herein. Such studies may drive future efforts towards the rational development of safe and effective technologies to deliver DAP to the skin. Graphical abstract.

How to define the experimental conditions of skin permeation assays for drugs presenting biopharmaceutical limitations? The experience with testosterone.

Cutaneous permeation assays are crucial to attest the performance or bioequivalence of topical or transdermal products. Although the official guidelines (e.g., FDA/EMA) play a key role in harmonizing the experimental design, alternative methods are often proposed by the scientific community, which makes it difficult to compare results from different studies. In this review, permeation assays with testosterone (TST) were selected to show this high variability in drug transport rate. The main sources of variation discussed were tissue thickness, animal model, donor and receptor fluid constitution, type of solubilizing agent used in aqueous fluids, drug concentration, degree of supersaturation, skin lipid content, number of experimental times and the physical-chemical stability of the molecule in test fluids. This variation becomes even more critical for molecules that present biopharmaceutical limitations such as TST. In addition, the skin presents specific receptors for this hormone due to its physiological action in this region of the body, which makes the evaluation of the TST transport rate in this tissue even more challenging. The impact of each experimental parameter mentioned above on the flux or permeation coefficient of TST is discussed in detail in the review. Assays used to evaluate tissue integrity are also presented.

Understanding stress-induced disorder and breakage in organic crystals: beyond crystal structure anisotropy.

Crystal engineering has advanced the strategies for design and synthesis of organic solids with the main focus being on customising the properties of the materials. Research in this area has a significant impact on large-scale manufacturing, as industrial processes may lead to the deterioration of such properties due to stress-induced transformations and breakage. In this work, we investigate the mechanical properties of structurally related labile multicomponent solids of carbamazepine (CBZ), namely the dihydrate (CBZ·2H2O), a cocrystal of CBZ with 1,4-benzoquinone (2CBZ·BZQ) and the solvates with formamide and 1,4-dioxane (CBZ·FORM and 2CBZ·DIOX, respectively). The effect of factors that are external (e.g. impact stressing) and/or internal (e.g. phase transformations and thermal motion) to the crystals are evaluated. In comparison to the other CBZ multicomponent crystal forms, CBZ·2H2O crystals tolerate less stress and are more susceptible to breakage. It is shown that this poor resistance to fracture may be a consequence of the packing of CBZ molecules and the orientation of the principal molecular axes in the structure relative to the cleavage plane. It is concluded, however, that the CBZ lattice alone is not accountable for the formation of cracks in the crystals of CBZ·2H2O. The strength and the temperature-dependence of electrostatic interactions, such as hydrogen bonds between CBZ and coformer, appear to influence the levels of stress to which the crystals are subjected that lead to fracture. Our findings show that the appropriate selection of coformer in multicomponent crystal forms, targetting superior mechanical properties, needs to account for the intrinsic stress generated by molecular vibrations and not solely by crystal anisotropy. Structural defects within the crystal lattice, although highly influenced by the crystallisation conditions and which are especially difficult to control in organic solids, may also affect breakage.

Mechanochemical Formation of Racemic Praziquantel Hemihydrate with Improved Biopharmaceutical Properties.

Praziquantel (PZQ) is the first-line drug used against schistosomiasis, one of the most common parasitic diseases in the world. A series of crystalline structures including two new polymorphs of the pure drug and a series of cocrystals of PZQ have been discovered and deposited in the Cambridge Structural Database (CSD). This work adds to the list of multicomponent forms of PZQ a relevant example of a racemic hemihydrate (PZQ-HH), obtainable from commercial PZQ (polymorphic Form A) through mechanochemistry. Noteworthy, the formation of the new hemihydrate strongly depends on the initial polymorphic form of PZQ and on the experimental conditions used. The new PZQ-HH has been fully characterized by means of HPLC, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Hot-Stage Microscopy (SEM), Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), FT-IR, polarimetry, solid-state NMR (SS-NMR), solubility and intrinsic dissolution rate (IDR), and in vitro tests on Schistosoma mansoni adults. The crystal structure was solved from the powder X-ray diffraction pattern and validated by periodic-DFT calculations. The new bioactive hemihydrate was physically stable for three months and showed peculiar biopharmaceutical features including enhanced solubility and a double intrinsic dissolution rate in water in comparison to the commercially available PZQ Form A.