RESUMEN
Spin crossover (SCO) complexes sensitively react on changes of the environment by a change in the spin of the central metallic ion making them ideal candidates for molecular spintronics. In particular, the composite of SCO complexes and ferromagnetic (FM) surfaces would allow spin-state switching of the molecules in combination with the magnetic exchange interaction to the magnetic substrate. Unfortunately, when depositing SCO complexes on ferromagnetic surfaces, spin-state switching is blocked by the relatively strong interaction between the adsorbed molecules and the surface. Here, the Fe(II) SCO complex [FeII (Pyrz)2 ] (Pyrz = 3,5-dimethylpyrazolylborate) with sub-monolayer thickness in contact with a passivated FM film of Co on Au(111) is studied. In this case, the molecules preserve thermal spin crossover and at the same time the high-spin species show a sizable exchange interaction of > 0.9 T with the FM Co substrate. These observations provide a feasible design strategy in fabricating SCO-FM hybrid devices.
RESUMEN
The discovery of the high maximum energy product of 59 MGOe for NdFeB magnets is a breakthrough in the development of permanent magnets with a tremendous impact in many fields of technology. This value is still the world record, for 40 years. This work reports on a reliable and robust route to realize nearly perfectly ordered L10 -phase FePt nanoparticles, leading to an unprecedented energy product of 80 MGOe at room temperature. Furthermore, with a 3 nm Au coverage, the magnetic polarization of these nanomagnets can be enhanced by 25% exceeding 1.8 T. This exceptional magnetization and anisotropy is confirmed by using multiple imaging and spectroscopic methods, which reveal highly consistent results. Due to the unprecedented huge energy product, this material can be envisaged as a new advanced basic magnetic component in modern micro and nanosized devices.
RESUMEN
Two isostructural cobalt containing polyoxometalate water oxidation catalysts, [Co4(H2O)2(α-PW9O34)2]10- (Co4P2) and [Co4(H2O)2(α-VW9O34)2]10- (Co4V2), exhibit large differences in their catalytic performance. The substitution of phosphorus centers in Co4P2 with redox-active vanadium centers in Co4V2 leads to electronic structure modifications. Evidence for the significance of the vanadium centers to catalysis, predicted by theory, was found from soft X-ray absorption (XAS) and resonant inelastic X-ray scattering (RIXS). The XAS and RIXS spectra determine the electronic structure of the cobalt and vanadium sites in the pre-reaction state of both Co4V2 and Co4P2. High-energy resolution RIXS results reveal that Co4V2 possesses a smaller ligand field within the tetra-cobalt core and a cobalt-to-vanadium charge transfer band. The differences in electronic structures offer insights into the enhanced catalysis of Co4V2.
RESUMEN
The kinetics of photodegradation and the reactivity of different sites of the low-band-gap polymers poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4-b']dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (C-PCPDTBT) and poly[2,6-(4,4-bis-(2-ethylhexyl)dithieno[3,2-b:2',3'-d]silole)-alt-4,7-(2,1,3-benzothiadiazole)] (Si-PCPDTBT) are investigated as thin films and are compared to those of poly(3-hexylthiophene) (P3HT). The decay kinetics are monitored with UV/Vis spectroscopy and the reactivity and product evolution are investigated with X-ray photoelectron spectroscopy (XPS). Both polymers exhibit higher stability than P3HT. The bridging atom in the cyclopentadithiophene (CPDT) subunit has a significant influence on the stability. Varying oxidation rates for the different elements were observed. In the case of Si-PCPDTBT, the silicon atom is oxidized primarily, whereas the photooxidation rates of the other elements are reduced relative to C-PCPDTBT. Additionally, XPS experiments with varying excitation energies reveal a significant reaction gradient within a few nanometers of the surface of degraded thin films of C-PCPDTBT.
RESUMEN
The electronic structure of the interface between cobalt phthalocyanine (CoPc) and epitaxially grown manganese oxide (MnO) thin films is studied by means of photoemission (PES) and X-ray absorption spectroscopy (XAS). Our results reveal a flat-lying adsorption geometry of the molecules on the oxide surface which allows a maximal interaction between the π-system and the substrate. A charge transfer from MnO, in particular, to the central metal atom of CoPc is observed by both PES and XAS. The change of the shape of N-K XAS spectra at the interface points, however, to the involvement of the Pc macrocycle in the charge transfer process. As a consequence of the charge transfer, energetic shifts of MnO related core levels were observed, which are discussed in terms of a Fermi level shift in the semiconducting MnO films due to interface charge redistribution.
RESUMEN
The chemical transformation of the polar chloroaluminum phthalocyanine, AlClPc, to µ-(oxo)bis(phthalocyaninato)aluminum(III), (PcAl)2O, in thin films on indium tin oxide is studied and its influence on the molecular orientation is discussed. The studies were conducted using complementary spectroscopic techniques: Raman spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. In addition, density functional theory calculations were performed in order to identify specific vibrations and to monitor the product formation. The thin films of AlClPc were annealed in controlled environmental conditions to obtain (PcAl)2O. It is shown that the chemical transformation in the thin films can proceed only in the presence of water. The influence of the reaction and the annealing on the molecular orientation was studied with Raman spectroscopy and NEXAFS spectroscopy in total electron yield and partial electron yield modes. The comparison of the results obtained from these techniques allows the determination of the molecular orientation of the film as a function of the probing depth.
RESUMEN
The syntheses of Ni-poor (NCM111, LiNi1/3Co1/3Mn1/3O2) and Ni-rich (NCM811 LiNi0.8Co0.1Mn0.1O2) lithium transition-metal oxides (space group R3Ì m) from hydroxide precursors (Ni1/3Co1/3Mn1/3(OH)2, Ni0.8Co0.1Mn0.1(OH)2) are investigated using in situ synchrotron powder diffraction and near-edge X-ray absorption fine structure spectroscopy. The development of the layered structure of these two cathode materials proceeds via two utterly different reaction mechanisms. While the synthesis of NCM811 involves a rock salt-type intermediate phase, NCM111 reveals a layered structure throughout the entire synthesis. Moreover, the necessity and the impact of a preannealing step and a high-temperature holding step are discussed.
RESUMEN
It is demonstrated that the near-edge X-ray absorption fine structure (NEXAFS) provides a powerful local probe of functional groups in novel charge transfer (CT) compounds and their electronic properties. Microcrystals of tetra-/hexamethoxypyrene as donors with the strong acceptor tetracyano-p-quinodimethane (TMP/HMP-TCNQ) were grown by vapor diffusion. The oxygen and nitrogen K-edge spectra are spectroscopic fingerprints of the functional groups in the donor and acceptor moieties, respectively. The orbital selectivity of the NEXAFS pre-edge resonances allows us to precisely elucidate the participation of specific orbitals in the charge transfer process. Upon complex formation, the intensities of several resonances change substantially and a new resonance occurs in the oxygen K-edge spectrum. This gives evidence of a corresponding change of hybridization of specific orbitals in the functional groups of the donor (those derived from the frontier orbitals 2e and 6a(1) of the isolated methoxy group) and acceptor (orbitals b(3g), a(u), b(1g), and b(2u), all located at the cyano group) with π*-orbitals of the ring systems. Along with this intensity effect, the resonance positions associated with the oxygen K-edge (donor) and nitrogen K-edge (acceptor) shift to higher and lower photon energies in the complex, respectively. A calculation based on density functional theory qualitatively explains the experimental results. NEXAFS measurements shine light on the action of the functional groups and elucidate charge transfer on a submolecular level.
RESUMEN
We present the cobalt 2p3d resonant inelastic X-ray scattering (RIXS) spectra of Co3O4. Guided by multiplet simulation, the excited states at 0.5 and 1.3 eV can be identified as the 4 T 2 excited state of the tetrahedral Co2+ and the 3 T 2g excited state of the octahedral Co3+, respectively. The ground states of Co2+ and Co3+ sites are determined to be high-spin 4 A 2(T d ) and low-spin 1 A 1g (Oh ), respectively. It indicates that the high-spin Co2+ is the magnetically active site in Co3O4. Additionally, the ligand-to-metal charge transfer analysis shows strong orbital hybridization between the cobalt and oxygen ions at the Co3+ site, while the hybridization is weak at the Co2+ site.
RESUMEN
We study the electronic structure of 4,7-bis(5-methylthiophen-2-yl)benzo[c][1,2,5]thiadiazole (MTBT) and its interface properties with gold using X-ray photoemission spectroscopy (XPS), valence-band ultraviolet photoemission spectroscopy (UPS), X-ray absorption spectroscopy (XAS), as well as resonant photoemission (ResPES). MTBT can be regarded as a model molecule for PCPDTBT, a promising candidate for efficient bulk heterojunction solar cells. Almost no contribution of sulfur and only a weak contribution of nitrogen to the HOMO level is found. At the interface with gold, a strong chemical interaction between the sulfur of the benzothiadiazole and gold occurs, which may have consequences for interface properties in devices.
RESUMEN
In recent years, multiferroics and magnetoelectrics have demonstrated their potential for a variety of applications. However, no magnetoelectric material has been translated to a real application yet. Here, we report for the first time that a magnetoelectric core-shell ceramic, is synthesized via a conventional solid-state reaction, where core-shell grains form during a single sintering step. The core consists of ferrimagnetic CoFe2O4, which is surrounded by a ferroelectric shell consisting of (BiFeO3)x-(Bi1/2K1/2TiO3)1-x. We establish the core-shell nature of these grains by transmission-electron microscopy (TEM) and find an epitaxial crystallographic relation between core and shell, with a lattice mismatch of 6 ± 0.7%. The core-shell grains exhibit exceptional magnetoelectric coupling effects that we attribute to the epitaxial connection between the magnetic and ferroelectric phase, which also leads to magnetic exchange coupling as demonstrated by neutron diffraction. Apparently, ferrimagnetic CoFe2O4 cores undergo a non-centrosymmetric distortion of the crystal structure upon epitaxial strain from the shell, which leads to simultaneous ferrimagnetism and piezoelectricity. We conclude that in situ core-shell ceramics offer a number of advantages over other magnetoelectric composites, such as lower leakage current, higher density and absence of substrate clamping effects. At the same time, the material is predestined for application, since its preparation is cost-effective and only requires a single sintering step. This discovery adds a promising new perspective for the application of magnetoelectric materials.
RESUMEN
Molecular patterning processes taking place in biological systems are challenging to study in vivo because of their dynamic behavior, subcellular size, and high degree of complexity. In vitro patterning of biomolecules using nanolithography allows simplification of the processes and detailed study of the dynamic interactions. Parallel dip-pen nanolithography (DPN) is uniquely capable of integrating functional biomolecules on subcellular length scales due to its constructive nature, high resolution, and high throughput. Phospholipids are particularly well suited as inks for DPN since a variety of different functional lipids can be readily patterned in parallel. Here DPN is used to spatially pattern multicomponent micro- and nanostructured supported lipid membranes and multilayers that are fluid and contain various amounts of biotin and/or nitrilotriacetic acid functional groups. The patterns are characterized by fluorescence microscopy and photoemission electron microscopy. Selective adsorption of functionalized or recombinant proteins based on streptavidin or histidine-tag coupling enables the semisynthetic fabrication of model peripheral membrane bound proteins. The biomimetic membrane patterns formed in this way are then used as substrates for cell culture, as demonstrated by the selective adhesion and activation of T-cells.
Asunto(s)
Técnicas de Cultivo de Célula/métodos , Nanotecnología/métodos , Fosfolípidos/metabolismo , Proteínas/metabolismo , Anticuerpos , Adhesión Celular , Proteínas Fluorescentes Verdes/metabolismo , Humanos , Concentración de Iones de Hidrógeno , Células Jurkat , Activación de Linfocitos , Microscopía Fluorescente , Nanoestructuras/química , Fosfolípidos/química , Proteínas Recombinantes de Fusión/metabolismo , Fracciones Subcelulares/metabolismo , Linfocitos T/citologíaRESUMEN
The degradation of LiNi0.8Co0.15Al0.05O2 (LNCAO) is reflected by the electrochemical performance in the fatigued state and correlated with the redox behavior of these cathodes. The detailed electrochemical performance of these samples is investigated by galvanostatic and voltammetric cycling as well as with the galvanostatic intermittent titration technique (GITT). Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy was used to investigate the oxidation state of all three materials at the Ni L2,3, O K, and Co L2,3 edges at five different states of charge. Surface and more bulklike properties are distinguished by total electron yield (TEY) and fluorescence yield (FY) measurements. The electrochemical investigations revealed that the changes in the cell performance of the differently aged materials can be explained by considering the reaction kinetics of the intercalation/deintercalation process. The failure of the redox process of oxygen and nickel at low voltages leads to a significant decrease of the reaction rates in the fatigued cathodes. The accompanied cyclic voltammogram (CV) peaks appear as two peaks because of the local minimum of the reaction rate, although it is one peak in the CV of the calendarically aged LNCAO. The absence of the oxidation/reduction process at low voltages can be traced back to changes in the surface morphology (formation of a NiO-like structure). Further consequences of these material changes are overpotentials, which lead to capacity losses of up to 30% (cycled with a C/3 rate).
RESUMEN
The growth of copper phthalocyanine thin films evaporated on polycrystalline gold is examined in detail using near edge x-ray absorption fine structure spectroscopy and surface sensitive x-ray photoemission spectroscopy. The combination of both methods allows distinguishing between the uppermost layers and buried interface layers in films up to approximately 3 nm thickness. An interfacial layer of approximately 3 ML of molecules with an orientation parallel to the substrate surface was found, whereas the subsequent molecules are perpendicular to the metal surface. It was shown that even if the preferred molecular orientation in thin films is perpendicular, the buried interfacial layer can be oriented differently.
RESUMEN
We present first results of the combination of imaging photoemission electron spectroscopy with imaging mass spectrometry. Imaging NEXAFS was combined with TOF-SIMS in order to perform a spatially resolved chemical and isotopic analysis of microscopic grain samples. Imaging NEXAFS was used for the nondestructive lateral characterization of mineral phases prior to isotopically resolved mass analysis by imaging TOF-SIMS. This novel approach was demonstrated by performing a chemical and isotopic analysis of the rare presolar grain fraction present in the Murchison meteorite.