Facile Synthesis of PdO.TiO2 Nanocomposite for Photoelectrochemical Oxygen Evolution Reaction.

The rapid depletion of fossil fuels and environmental pollution has motivated scientists to cultivate renewable and green energy sources. The hydrogen economy is an emerging replacement for fossil fuels, and photocatalytic water splitting is a suitable strategy to produce clean hydrogen fuel. Herein, the photocatalyst (PdO.TiO2) is introduced as an accelerated photoelectrochemical oxygen evolution reaction (OER). The catalyst showed significant improvement in the current density magnitude from 0.89 (dark) to 4.27 mA/cm2 (light) during OER at 0.5 V applied potential. The as-synthesized material exhibits a Tafel slope of 170 mVdec-1 and efficiency of 0.25% at 0.93 V. The overall outcomes associated with the photocatalytic activity of PdO.TiO2 demonstrated that the catalyst is highly efficient, thereby encouraging researchers to explore more related catalysts for promoting facile OER.

The Emergence of 2D MXenes Based Zn-Ion Batteries: Recent Development and Prospects.

Rechargeable zinc-ion batteries (ZIBs) with exceptional theoretical capacity have garnered significant interest in large-scale electrochemical energy storage devices due to their low cost, abundant material, inherent safety, high specific energy, and ecofriendly nature. Metal carbides/nitrides, known as MXenes, have emerged as a large family of 2D transition metal carbides or carbonitrides with excellent properties, e.g., high electrical conductivity, large surface functional groups (e.g., F, O, and OH), low energy barriers for the diffusion of electrolyte ions with wide interlayer spaces. After a decade of effort, significant development has been achieved in the synthesis, properties, and applications of MXenes. Thus, it has opened up various exciting opportunities to construct advanced MXene-based nanostructures for ZIBs with excellent specific energy and power. Herein, this review summarizes the advances across multiple synthesis routes, related properties, morphological and structural characteristics, and chemistries of MXenes for ZIBs. The recent development of MXene-based electrodes is introduced, and electrolytes for ZIBs are elucidated in detail. MXene-based rocking chair ZIBs, strategies to enhance the performance of MXene-based cathodes, suppress the dendrites in MXene-based anodes, and MXene-based flexible ZIBs are pointed out. A rational design and modification of the MXenes as well as the production of composites with metal oxides exhibits promise in solving issues and enhancing the electrochemical performance of ZIBs. Finally, the present challenges and future prospects for MXene-based ZIBs are discussed.

Identification of Catalytic Active Sites for Durable Proton Exchange Membrane Fuel Cell: Catalytic Degradation and Poisoning Perspectives.

Recent progress in synthetic strategies, analysis techniques, and computational modeling assist researchers to develop more active catalysts including metallic clusters to single-atom active sites (SACs). Metal coordinated N-doped carbons (M-N-C) are the most auspicious, with a large number of atomic sites, markedly performing for a series of electrochemical reactions. This perspective sums up the latest innovative and computational comprehension, while giving credit to earlier/pioneering work in carbonaceous assembly materials towards robust electrocatalytic activity for proton exchange membrane fuel cells via inclusive performance assessment of the oxygen reduction reaction (ORR). M-Nx -Cy are exclusively defined active sites for ORR, so there is a unique possibility to intellectually design the relatively new catalysts with much improved activity, selectivity, and durability. Moreover, some SACs structures provide better performance in fuel cells testing with long-term durability. The efforts to understand the connection in SACs based M-Nx -Cy moieties and how these relate to catalytic ORR performance are also conveyed. Owing to comprehensive practical application in the field, this study has covered very encouraging aspects to the current durability status of M-N-C based catalysts for fuel cells followed by degradation mechanisms such as macro-, microdegradation, catalytic poisoning, and future challenges.

Recent Advances in Synthesis and Applications of Single-Atom Catalysts for Rechargeable Batteries.

The rapid development of flexible and wearable optoelectronic devices, demanding the superior, reliable, and ultra-long cycling energy storage systems. But poor performances of electrode materials used in energy devices are main obstacles. Recently, single-atom catalysts (SACs) are considered as emerging and potential candidates as electrode materials for battery devices. Herein, we have discussed the recent methods for the fabrication of SACs for rechargeable metal-air batteries, metal-CO2 batteries, metal-sulfur batteries, and other batteries, following the recent advances in assembling and performance of these batteries by using SACs as electrode materials. The role of SACs to solve the bottle-neck problems of these energy storage devices and future perspectives are also discussed.

Energy storage properties of hydrothermally processed ultrathin 2D binder-free ZnCo2O4nanosheets.

High energy-density supercapacitors (SCs) with long operating life, cost-effective, and competitive cycling performance is attracted great research attention to competing in the requirements of the modern age. However, despite these benefits, SC hampers inadequate rate-capability and structural deterioration, which primarily affects its commercialization. Herein, ultra-thin two-dimensional (2D) ZnCo2O4nanosheets arein situanchored on the conductive surface of nickel foam (denoted as ZCO@NF) by hydrothermal process. The binder-free ZCO@NF is employed as an electrode for SCs and shows impressive charge storage properties. ZCO@NF electrode exhibited a high capacitance of 1250 (750) and 733 F g-1(440 C g-1) at 2.5 and 20 A g-1, respectively, demonstrating the outstanding rate-capability of 58.6% even at 8 times larger current density. Furthermore, the ZCO@NF electrode exhibits admirable capacitance retention of 96.5% after 10 000 cycles. This impressive performance of the ZCO@NF electrode is attributed to the high surface area which gives a short distance for ion/electron transfer, a high conductivity with extensive electroactive cities, and strong structural stability. The binder-free approach provides a strong relationship between the current collector and the active material, which turns into improved electrochemical operation as an electrode material for SCs.

Nanostructure Engineering of Metal-Organic Derived Frameworks: Cobalt Phosphide Embedded in Carbon Nanotubes as an Efficient ORR Catalyst.

Heteroatom doping is considered an efficient strategy when tuning the electronic and structural modulation of catalysts to achieve improved performance towards renewable energy applications. Herein, we synthesized a series of carbon-based hierarchical nanostructures through the controlled pyrolysis of Co-MOF (metal organic framework) precursors followed by in situ phosphidation. Two kinds of catalysts were prepared: metal nanoparticles embedded in carbon nanotubes, and metal nanoparticles dispersed on the carbon surface. The results proved that the metal nanoparticles embedded in carbon nanotubes exhibit enhanced ORR electrocatalytic performance, owed to the enriched catalytic sites and the mass transfer facilitating channels provided by the hierarchical porous structure of the carbon nanotubes. Furthermore, the phosphidation of the metal nanoparticles embedded in carbon nanotubes (P-Co-CNTs) increases the surface area and porosity, resulting in faster electron transfer, greater conductivity, and lower charge transfer resistance towards ORR pathways. The P-Co-CNT catalyst shows a half-wave potential of 0.887 V, a Tafel slope of 67 mV dec-1, and robust stability, which are comparatively better than the precious metal catalyst (Pt/C). Conclusively, this study delivers a novel path for designing multiple crystal phases with improved catalytic performance for energy devices.

Exploring Fe-Nx for Peroxide Reduction: Template-Free Synthesis of Fe-Nx Traumatized Mesoporous Carbon Nanotubes as an ORR Catalyst in Acidic and Alkaline Solutions.

Fe-based electrocatalysts are elegant due to their better performance towards the oxygen reduction reaction. Nevertheless, they commonly contain different moieties, for example Fe-Nx , Fe, Fe3 C and N-doped carbon, primarily the debatable assistance of these components towards ORR electrocatalysis, specifically for intermediate peroxide reduction reactions (PRR). In this paper, to explore the role of Fe-Nx centres for PRR, a Fe-N-C electrocatalyst rooted in nitrogen-doped carbon nanotubes with mesoporous structures was synthesized from a Fe/Zn-dicyanoimidazolate framework. The use of dicyanoimidazole coordinated with iron can introduce the Fe-Nx active sites as well as directional N-doped carbon nanotubes, which is good for enhancing electronic conductance of the catalyst. The attained electrocatalyst shows tremendous enactment to ORR, being comparable to the activity of Pt/C in acidic and better in alkaline electrolytes. This study also reveals that Fe-Nx active centres are responsible for less H2 O2 production. Though the Fe-Nx moieties and Fe3 C/Fe particles encapsulated N-doped carbon, both are active centres for ORR, however, Fe-Nx sites are more active than others for peroxide reduction reaction. These perceptions suggest rational methodologies for more active and consequently further durable Fe-N-C catalysts.

An Efficient Anti-poisoning Catalyst against SOx , NOx , and POx : P, N-Doped Carbon for Oxygen Reduction in Acidic Media.

Electrocatalysts are readily poisoned during the catalysis of the oxygen reduction reaction (ORR); even air containing traces of SOx and/or NOx significantly decrease the activity and the durability of H2 -O2 fuel cells. Now, a metal-free strategy is reported to develop an efficient anti-poisoning ORR catalyst, which involves the pyrolysis of PDAP-phytic acid super-molecular aggregate (PPSA). The pyrolyzed co-doped carbon acting as a metal-free electrocatalyst shows an enhanced activity for ORR in acidic medium, even under poisoning conditions (SOx , NOx , and POx ). Moreover, P-doping also changes the ORR pathway by yielding less than 4 % of H2 O2 , indicating a four-electron pathway whereas more than>20 % of H2 O2 was recorded for N-doped carbon synthesized from PDAP.

Novel and efficient Bi-doped CoTe nano-solar evaporators embedded on leno weave cotton gauze for efficient solar-driven desalination.

Solar-driven desalination is considered an alternative to the conventional desalination due to its nearly zero carbon footprint and ease of operating in remote areas. Water can be purified wherever sunlight is available, providing a viable solution to water shortage. Metal chalcogenide-based materials are revolutionary for solar evaporators due to their excellent photothermal conversion efficiency, facile synthesis methods, stability, and low cost. Herein we present a prototype Bi-doped CoTe nano-solar evaporator embedded on leno weave cotton gauze (Bi/CoTe@CG) using the sonication process. The nano-solar evaporator was synthesized using a simple hydrothermal approach to provide an opportunity to scale up. The as designed solar evaporator consisting of 5 % Bi/CoTe@CG showed an excellent water flux of 2.38 kg m-2 h-1 upon one sun radiation (1 kW m-2), considered among the highest literature-reported values. The introduced solar evaporator showed excellent solar efficiency of 96.7 %, good stability, and reusability for five cycles of one hour. The best doping ratio of Bi in CoTe was obtained as Bi0.5Co9.5Te with a contact angle of 11.9° in powder form. The hydrophilic nature of the designed solar-evaporator increased the water interaction with the embedded nano-solar evaporator, which helps the transfer of the heat to nearby water molecules, break their hydrogen bonding and increase the evaporation rate. The ion concentration, of the desalinated pure water collected using Bi/CoTe@CG, decreased by many orders of magnitude and it is far below the limit of WHO standards for Na+ and K+. Thus, a self-floating Bi-doped CoTe nano-solar evaporator deposited on cotton gauze (CG) is an excellent solar evaporator for seawater desalination. The proposed solar evaporator is another step towards introducing environmentally friendly desalination methods.

Synthesis of oxidized carboxymethyl cellulose-chitosan and its composite films with SiC and SiC@SiO2 nanoparticles for methylene blue dye adsorption.

The cationic methylene blue (MB) dye sequestration was studied by using oxidized carboxymethyl cellulose-chitosan (OCMC-CS) and its composite films with silicon carbide (OCMC-CS-SiC), and silica-coated SiC nanoparticles (OCMC-CS-SiC@SiO2). The resulting composite films were characterized through various analytical techniques, including Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Field emission scanning electron microscopy (FESEM), and energy-dispersive X-ray spectroscopy (EDS). The dye adsorption properties of the synthesized composite films were comprehensively investigated in batch experiments and the effect of parameters such as contact time, initial dye concentration, catalyst dosages, temperature, and pH were systematically evaluated. The results indicated that the film's adsorption efficiency was increased by increasing the contact time, catalyst amount, and temperature, and with a decreased initial concentration of dye solution. The adsorption efficiency was highest at neutral pH. The experimental results demonstrated that OCMC-CS films have high dye adsorption capabilities as compared to OCMC-CS-SiC, and OCMC-CS-SiC@SiO2. Additionally, the desorption investigation suggested that the adsorbents are successfully regenerated. Overall, this study contributes to the development of sustainable and effective adsorbent materials for dye removal applications. These films present a promising and environmentally friendly approach to mitigate dye pollution from aqueous systems.

Engineering Mn-Doped CdS Thin Films Through Chemical Bath Deposition for High-Performance Photoelectrochemical Water Splitting.

Doping conventional materials with a second element is an exciting strategy for enhancing catalytic performance via electronic structure modifications. Herein, Mn-doped CdS thin films were successfully synthesized with the aid of the chemical bath deposition (CBD) by varying the pH value (8, 10, and 12) and the surfactant amount (20, 40, 60 mg). Different morphologies like nano-cubes, nanoflakes, nano-worms, and nanosheets were obtained under different deposition conditions. The optimized Mn-doped CdS synthesized at pH=8 exhibited better photoelectrochemical (PEC) performance for oxygen evolution reaction (OER) than pure CdS films, with a maximum photocurrent density of 300 µA/cm2 at an external potential of 0.5 V, under sunlight illumination. The observed performance is attributed to the successful Mn doping, porosity, high surface area, and nanosphere morphology.

The recent advances in the approach of artificial intelligence (AI) towards drug discovery.

Artificial intelligence (AI) has recently emerged as a unique developmental influence that is playing an important role in the development of medicine. The AI medium is showing the potential in unprecedented advancements in truth and efficiency. The intersection of AI has the potential to revolutionize drug discovery. However, AI also has limitations and experts should be aware of these data access and ethical issues. The use of AI techniques for drug discovery applications has increased considerably over the past few years, including combinatorial QSAR and QSPR, virtual screening, and denovo drug design. The purpose of this survey is to give a general overview of drug discovery based on artificial intelligence, and associated applications. We also highlighted the gaps present in the traditional method for drug designing. In addition, potential strategies and approaches to overcome current challenges are discussed to address the constraints of AI within this field. We hope that this survey plays a comprehensive role in understanding the potential of AI in drug discovery.

Efficient Adsorption of Methylene Blue Using a Hierarchically Structured Metal-Organic Framework Derived from Layered Double Hydroxide.

The growing concerns about environmental pollution, particularly water pollution, are causing an increasing alarm in modern society. One promising approach to address this issue involves engineering existing materials to enhance their effectiveness. A one-step solvothermal reconstruction approach was used to build an eco-friendly two-dimensional (2D) AlNiZn-LDH/BDC MOF composite. The characterizations confirm the formation of a metal-organic framework (MOF) at the layered double hydroxide (LDH) surface. The resulting synthesized material, 2D AlNiZn-LDH/BDC MOF, demonstrated remarkable efficacy in decontaminating methylene blue (MB), a model cationic dye found in water systems. The removal performance of 2D AlNiZn-LDH/BDC MOF was significantly higher than that of pristine 2D AlNiZn-LDH. This improvement shows the potential to increase the adsorption capabilities of nanoporous LDH materials by incorporating organic ligands and integrating meso-/microporosity through MOF formation on their surfaces. Furthermore, their kinetic, isothermal, and thermodynamic studies elucidated the adsorption behavior of this composite material. The results of synthesized MOF showed excellent removal efficiency (92.27%) of 10 ppm of MB aqueous solution as compared to pristine LDH. Additionally, the as-synthesized adsorbent could be regenerated for six successive cycles. This method holds promise for the synthesis of novel and highly effective materials to combat water pollution, laying the groundwork for potential advancements in diverse applications.

Recent trends in wastewater treatment by using metal-organic frameworks (MOFs) and their composites: A critical view-point.

Respecting the basic need of clean and safe water on earth for every individual, it is necessary to take auspicious steps for waste-water treatment. Recently, metal-organic frameworks (MOFs) are considered as promising material because of their intrinsic features including the porosity and high surface area. Further, structural tunability of MOFs by following the principles of reticular chemistry, the MOFs can be functionalized for the high adsorption performance as well as adsorptive removal of target materials. However, there are still some major concerns associated with MOFs limiting their commercialization as promising adsorbents for waste-water treatment. The cost, toxicity and regenerability are the major issues to be addressed for MOFs to get insightful results. In this article, we have concise the current strategies to enhance the adsorption capacity of MOFs during the water-treatment for the removal of toxic dyes, pharmaceuticals, and heavy metals. Further, we have also discussed the role of metallic nodes, linkers and associated functional groups for effective removal of toxic water pollutants. In addition to conformist overview, we have critically analyzed the MOFs as adsorbents in terms of toxicity, cost and regenerability. These factors are utmost important to address before commercialization of MOFs as adsorbents for water-treatment. Finally, some future perspectives are discussed to give directions for potential research.

A salt-baking 'recipe' of commercial nickel-molybdenum alloy foam for oxygen evolution catalysis in water splitting.

Ni-based metal foam holds promise as an electrochemical water-splitting catalyst, due to its low cost, acceptable catalytic activity and superior stability. However, its catalytic activity must be improved before it can be used as an energy-saving catalyst. Here, a traditional Chinese recipe, salt-baking, was employed to surface engineering of nickel-molybdenum alloy (NiMo) foam. During salt-baking, a thin layer of FeOOH nano-flowers was assembled on the NiMo foam surface then the resultant NiMo-Fe catalytic material was evaluated for its ability to support oxygen evolution reaction (OER) activity. The NiMo-Fe foam catalyst generated an electric current density of 100 mA cm-2 that required an overpotential of only 280 mV, thus demonstrating that its performance far exceeded that of the benchmark catalyst RuO2 (375 mV). When employed as both the anode and cathode for use in alkaline water electrolysis, the NiMo-Fe foam generated a current density (j) output that was 3.5 times greater than that of NiMo. Thus, our proposed salt-baking method is a promising simple and environmentally friendly approach for surface engineering of metal foam for designing catalysts.

Anticancer Properties of Ru and Os Half-Sandwich Complexes of N,S Bidentate Schiff Base Ligands Derived from Phenylthiocarbamide.

The versatile coordinating nature of N,S bidentate ligands is of great importance in medicinal chemistry imparting stability and enhancing biological properties of the metal complexes. Phenylthiocarbamide-based N,S donor Schiff bases converted into RuII /OsII (cymene) complexes and characterized by spectroscopic techniques and elemental analysis. The hydrolytic stability of metal complexes to undergo metal-halide ligand exchange reaction was confirmed both by the DFT and NMR experimentation. The ONIOM (QM/MM) study confirmed the histone protein targeting nature of aqua/hydroxido complex 2 aH with an excellent binding energy of -103.19 kcal/mol. The antiproliferative activity against a panel of cancer cells A549, MCF-7, PC-3, and HepG2 revealed that ruthenium complexes 1 a-3 a were more cytotoxic than osmium complexes and their respective ligands 1-3 as well. Among these ruthenium cymene complex bearing sulfonamide moiety 2 a proved a strong cytotoxic agent and showed excellent correlation of cellular accumulation, lipophilicity, and drug-likeness to the anticancer activity. Moreover, the favorable physiochemical properties such as bioavailability and gastrointestinal absorption of ligand 2 also supported the development of Ru complex 2 a as an orally active anticancer metallodrug.

Recent Advances in Transition Metal Tellurides (TMTs) and Phosphides (TMPs) for Hydrogen Evolution Electrocatalysis.

The hydrogen evolution reaction (HER) is a developing and promising technology to deliver clean energy using renewable sources. Presently, electrocatalytic water (H2O) splitting is one of the low-cost, affordable, and reliable industrial-scale effective hydrogen (H2) production methods. Nevertheless, the most active platinum (Pt) metal-based catalysts for the HER are subject to high cost and substandard stability. Therefore, a highly efficient, low-cost, and stable HER electrocatalyst is urgently desired to substitute Pt-based catalysts. Due to their low cost, outstanding stability, low overpotential, strong electronic interactions, excellent conductivity, more active sites, and abundance, transition metal tellurides (TMTs) and transition metal phosphides (TMPs) have emerged as promising electrocatalysts. This brief review focuses on the progress made over the past decade in the use of TMTs and TMPs for efficient green hydrogen production. Combining experimental and theoretical results, a detailed summary of their development is described. This review article aspires to provide the state-of-the-art guidelines and strategies for the design and development of new highly performing electrocatalysts for the upcoming energy conversion and storage electrochemical technologies.

NiCo2O4 nano-needles as an efficient electro-catalyst for simultaneous water splitting and dye degradation.

Developing an efficient and non-precious bifunctional catalyst capable of performing water splitting and organic effluent degradation in wastewater is a great challenge. This article reports an efficient bifunctional nanocatalyst based on NiCo2O4, synthesized using a simple one-pot co-precipitation method. We optimized the synthesis conditions by varying the synthesis pH and sodium dodecyl sulfate (SDS) concentrations. The prepared catalyst exhibited excellent catalytic activity for the electrochemical oxygen evolution reaction (OER) and simultaneous methylene blue (MB) dye degradation. Among the catalysts, the catalyst synthesized using 1 g SDS as a surfactant at 100 °C provided the highest current density (658 mA cm-2), lower onset potential (1.34 V vs. RHE), lower overpotential (170 mV @ 10 mA cm-2), and smallest Tafel slope (90 mV dec-1) value. Furthermore, the OH˙ radicals produced during the OER electrochemically degraded the MB to 90% within 2 hours. The stability test conducted at 20 mA cm-2 showed almost negligible loss of the electrochemical response for OER, with 99% retention of the original response. These results strongly suggest that this catalyst is a promising candidate for addressing the challenges of wastewater treatment and energy generation.

Metallic nanoparticles for catalytic reduction of toxic hexavalent chromium from aqueous medium: A state-of-the-art review.

The ever increasing concentration of toxic and carcinogenic hexavalent chromium (Cr (VI)) in various environmental mediums including water-bodies due to anthropogenic activities with rapid civilization and industrialization have become the major issue throughout the globe during last few decades. Therefore, developing new strategies for the treatment of Cr(VI) contaminated wastewaters are in great demand and have become a topical issue in academia and industry. To date, various techniques have been used for the remediation of Cr(VI) contaminated wastewaters including solvent extraction, adsorption, catalytic reduction, membrane filtration, biological treatment, coagulation, ion exchange and photo-catalytic reduction. Among these methods, the transformation of highly toxic Cr(VI) to benign Cr(III) catalyzed by metallic nanoparticles (M-NPs) with reductant has gained increasing attention in the past few years, and is considered to be an effective approach due to the superior catalytic performance of M-NPs. Thus, it is a timely topic to review this emerging technique for Cr(VI) reduction. Herein, recent development in synthesis of M-NPs based non-supported, supported, mono-, bi- and ternary M-NPs catalysts, their characterization and performance for the reduction of Cr(VI) to Cr(III) are reviewed. The role of supporting host to stabilize the M-NPs and leading to enhance the reduction of Cr(VI) are discussed. The Cr(VI) reduction mechanism, kinetics, and factors affecting the kinetics are overviewed to collect the wealthy kinetics data. Finally, the challenges and perspective in Cr(VI) reduction catalyzed by M-NPs are proposed. We believe that this review will assist the researchers who are working to develop novel M-NPs catalysts for the reduction of Cr(VI).

Strategic combination of metal-organic frameworks and C3N4 for expeditious photocatalytic degradation of dye pollutants.

The potential of fabricated silver and bismuth Co-N-doped imidazolate embedded into graphitic nitride BiO-Ag(0)/C3N4@ZIF-67 for the degradation of Methylene blue (MB) and Congo red (CR) dyes have been reported. The synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy photoluminescence (PL) spectroscopy, and electrochemical impedance spectroscopy (EIS). The band gaps of ZIF-67, C3N4 and composites were calculated using Tauc plot. Besides, it was revealed that incorporation of silver, bismuth, and C3N4 reduced the band gap energy to 2.2 eV. The introduction of metallic species in the precursors promoted better charge separation behavior towards photogenerated electron and hole in the heterojunction composite. Two perilous organic dyes; MB and CR were degraded under natural sunlight irradiation. The photocatalytic efficiency of BiO-Ag(0)/C3N4@ZIF-67 for the removal of CR and MB significantly increased compared to bare ZIF-67. The enhanced photocatalytic activity of BiO-Ag(0)/C3N4@ZIF-67 is attributed to the higher surface area and Plasmon effect of noble silver metal. The solar light-triggered degradation of MB and CR yielded efficient efficiency of 96.5 and 90% for 10 mg/L of dye solution each. Additionally, the effect of pH was evaluated for optimizing degradation of CR and MB dyes. The kinetics studies of both CR and MB were clarified according to Langmuir model. The reusability and quenching investigation of active species were carried out to discover find catalytic potential of the composite. Besides, possible dye degradation mechanism was proposed for BiO-Ag(0)/C3N4@ZIF-67. The obtained results indicated that solar-light triggered photocatalyst BiO-Ag(0)/C3N4@ZIF-67 can be employed as a promising approach for photocatalytic elimination of organic pollutants.