RESUMEN
Tissue repair and regeneration, such as bone and nerve restoration, face significant challenges due to strict regulations within the immune microenvironment, stem cell differentiation, and key cell behaviors. The development of 3D scaffolds is identified as a promising approach to address these issues via the efficiently structural regulations on cell fates and behaviors. In particular, 3D-printed polymer scaffolds with diverse micro-/nanostructures offer a great potential for mimicking the structures of tissue. Consequently, they are foreseen as promissing pathways for regulating cell fates, including cell phenotype, differentiation of stem cells, as well as the migration and the proliferation of key cells, thereby facilitating tissue repairs and regenerations. Herein, the roles of structural functions of 3D-printed polymer scaffolds in regulating the fates and behaviors of numerous cells related to tissue repair and regeneration, along with their specific influences are highlighted. Additionally, the challenges and outlooks associated with 3D-printed polymer scaffolds with various structures for modulating cell fates are also discussed.
RESUMEN
Hierarchical structures are important for transferring and amplifying molecular functions to macroscopic properties of materials. In this regard, rodlike molecules have emerged as one of the most promising molecular building blocks to construct functional materials. Although the self-assembly of conventional molecules containing rodlike components generally results in nematic or layered smectic phases, due to the preferred parallel arrangements of rodlike components, extensive efforts have revealed that rational molecular design provides a versatile platform to engineer rich self-assembled structures. Herein, first successes achieved in polyphilic liquid crystals and rod-coil block systems are summarized. Special attention is paid to recent progress in the conjugation of rodlike building blocks with other molecular building blocks through the molecular Lego approach. Rod-based giant surfactants, sphere-rod conjugates, and dendritic rodlike molecules are covered. Future perspectives of the self-assembly of molecules containing rodlike components are also provided.
RESUMEN
Like other discotic molecules, self-assembled supramolecular structures of perylene bisimides (PBIs) are commonly limited to columnar or lamellar structures due to their distinct π-conjugated scaffolds and unique rectangular shape of perylene cores. The discovery of PBIs with supramolecular structures beyond layers and columns may expand the scope of PBI-based materials. A series of unconventional spherical packing phases in PBIs, including A15 phase, σ phase, dodecagonal quasicrystalline (DQC) phase, and body-centered cubic (BCC) phase, is reported. A strategy involving functionalization of perylene core with several polyhedral oligomeric silsesquioxane (POSS) cages achieved spherical assemblies of PBIs, instead of columnar assemblies, due to the significantly increased steric hindrance at the periphery. This strategy may also be employed for the discovery of unconventional spherical assemblies in other related discotic molecules by the introduction of similar bulky functional groups at their periphery. An unusual inverse phase transition sequence from a BCC phase to a σ phase was observed by increasing annealing temperature.
RESUMEN
Self-assembled nanostructures of rod-like molecules are commonly limited to nematic or layered smectic structures dominated by the parallel arrangement of the rod-like components. Distinct self-assembly behavior of four categories of dendritic rods constructed by placing a tri(hydroxy) group at the apex of dendritic oligo-fluorenes is observed. Designed hydrogen bonding and dendritic architecture break the parallel arrangement of the rods, resulting in molecules with specific (fan-like or cone-like) shapes. While the fan-shaped molecules tend to form hexagonal packing cylindrical phases, the cone-shaped molecules could form spherical motifs to pack into various ordered structures, including the Frank-Kasper A15 phase and dodecagonal quasicrystal. This study provides a model system to engineer diverse supramolecular structures by rod-like molecules and sheds new light into the mechanisms of the formation of unconventional spherical packing structures in soft matter.
RESUMEN
This paper describes a rational strategy to obtain self-assembled two-dimensional (2D) nanocrystals with definite and uniform thickness from a series of molecular Janus particles based on molecular nanoparticles (MNPs). MNPs are 3D framework with rigid shapes. Three different types of MNPs based on derivatives of polyhedral oligomeric silsesquioxane (POSS), [60]fullerene (C60), and Lindqvist-type polyoxometalate (POM) are used as building blocks to construct these amphiphilic molecular Janus particles by covalently connecting hydrophobic crystalline BPOSS with a charged hydrophilic MNP. The formation of 2D nanocrystals with an exact thickness of double layers of molecules is driven by directional crystallization of the BPOSS MNP and controlled by various factors such as solvent polarity, number of counterions, and sizes of the MNPs. Strong solvating interactions of the ionic MNPs in polar solvents (e.g., acetonitrile and dimethylformamide) are crucial to provide repulsive interactions between the charged outlying ionic MNPs and suppress further aggregation along the layer normal direction. The number of counterions per molecule plays a major role in determining the self-assembled morphologies. Size matching of the hydrophobic and ionic MNPs is another critical factor in the formation of 2D nanocrystals. Self-assembly of rationally designed molecular Janus particles provides a unique "bottom-up" strategy to engineer 2D nanostructures.
RESUMEN
Transitions between gyroid and diamond intercatenated double network phases occur in many types of soft matter, but to date, the structural pathway and the crystallographic relationships remain unclear. Slice and view scanning electron microscopy tomography of a diblock copolymer affords monitoring of the evolving shape of the intermaterial dividing surface, allowing structural characterization of both the majority and minority domains. Two trihedral malleable mesoatoms combine to form a single tetrahedral mesoatom in a volume additive manner while preserving network topology, as the types of loops, the number of mesoatoms in a loop, minority domain strut lengths, and directions that connect a given mesoatom to its neighbors evolve across a 150 nm wide transition zone (TZ). The [111]DD direction is coincident with the [110]DG direction so that the (111)DD and (110)DG planes define the boundaries of the TZ. Selection of the particular crystal orientations and direction and width of the transition zone is to minimize the cost of morphing the mesoatoms from one structure to the other, by maximizing like-block continuity and minimizing the variation of the surface curvature and thickness of the domains across the TZ. Such coherent continuity of the independent, intercatenated networks across the transition zone is critical for applications such as graded mechanical trusses where the pair of different networks are joined to provide different mechanical properties for adjacent grains or could serve as a nanoscale anode/cathode allowing super charging and discharging provided the networks are continuous and rigorously separate.
RESUMEN
In order to restore the badly carious lesion of human dental enamel, a crystalline paste of fluoride substituted apatite cement was synthesized by using the mixture of tetracalcium phosphate (TTCP), dicalcium phosphate anhydrous (DCPA) and ammonium fluoride. The apatite cement paste could be directly filled into the enamel defects (cavities) to repair damaged dental enamel. The results indicated that the hardened cement was fluorapatite [Ca(10)(PO(4))(6)F(2), FA] with calcium to phosphorus atom molar ratio (Ca/P) of 1.67 and Ca/F ratio of 5. The solubility of FA cement in Tris-HCl solution (pH = 5) was slightly lower than the natural enamel, indicating the FA cement was much insensitive to the weakly acidic solutions. The FA cement was tightly combined with the enamel surface, and there was no obvious difference of the hardness between the FA cement and natural enamel. The extracts of FA cement caused no cytotoxicity on L929 cells, which satisfied the relevant criterion on dental biomaterials, revealing good cytocompatibility. In addition, the results showed that the FA cement had good mechanical strength, hydrophilicity, and anti-bacterial adhesion properties. The study suggested that using FA cement was simple and promising approach to effectively and conveniently restore enamel defects.
Asunto(s)
Apatitas/síntesis química , Cementos Dentales/síntesis química , Cementos Dentales/uso terapéutico , Esmalte Dental/lesiones , Restauración Dental Permanente/métodos , Apatitas/química , Apatitas/farmacología , Apatitas/uso terapéutico , Adhesión Bacteriana/efectos de los fármacos , Adhesión Bacteriana/fisiología , Células Cultivadas , Fuerza Compresiva , Cementos Dentales/química , Esmalte Dental/fisiología , Cavidad Pulpar/cirugía , Módulo de Elasticidad/fisiología , Escherichia coli/efectos de los fármacos , Escherichia coli/fisiología , Pruebas de Dureza , Humanos , Ensayo de Materiales , Estrés MecánicoRESUMEN
We have designed and synthesized a pair of sequence isomeric giant surfactants based on polystyrene (PS) and polyhedral oligomeric silsesquioxane (POSS) nanoparticles. Although these two macromolecules possess identical compositions as "sequence isomers", the distinctly arranged POSS sequences lead to different molecular packing conformations, and further induce distinguished self-assembly behaviors in DMF/water solutions.
RESUMEN
This work reports the molecular design, synthesis, and systematic study on the bulk self-assembly behaviors of three series of polyhedral oligomeric silsesquioxane (POSS)-based multiheaded giant surfactants XDPOSS-PSn (X = 2, 3, and 4), which are composed of two, three, or four hydrophilic hydroxyl-group-functionalized DPOSS cages attached via one junction point to a hydrophobic polystyrene (PS) chain. These series of hybrid polymeric amphiphiles with precisely defined chemical structure and controllable molecular architecture are synthesized by the sequential usage of "click" reactions. By tuning molecular weights of the PS tail, we established full phase diagrams of XDPOSS-PSn as a function of the volume fractions of PS chains (VfPS). We found that the self-assembled structures were greatly influenced by the molecular architecture. Strikingly, our results showed that the lamellar morphology, which usually existed at relatively symmetric compositions in common diblock copolymers, became the thermodynamically stable phase in the 3DPOSS-PSn and 4DPOSS-PSn samples even at an asymmetric composition up to VfPS = 0.842, with the ratio between the thicknesses of PS and DPOSS lamellae up to 5.32. This unusual phenomenon induced by molecular architectural variation could be explained by the large cross-sectional area of DPOSS cages at the nanophase-separated domain interface and high elastic deformation energy of clustered DPOSS cages which have relatively rigid conformation. The unique bulk self-assembly behaviors in our POSS-based multiheaded giant surfactants provide insights in developing hybrid nanomaterials toward unconventional nanostructures.
RESUMEN
The ability to manipulate self-assembly of molecular building blocks is the key to achieving precise "bottom-up" fabrications of desired nanostructures. Herein, we report a rational design, facile synthesis, and self-assembly of a series of molecular Janus particles (MJPs) constructed by chemically linking α-Keggin-type polyoxometalate (POM) nanoclusters with functionalized polyhedral oligomeric silsesquioxane (POSS) cages. Diverse nanostructures were obtained by tuning secondary interactions among the building blocks and solvents via three factors: solvent polarity, surface functionality of POSS derivatives, and molecular topology. Self-assembled morphologies of KPOM-BPOSS (B denotes isobutyl groups) were found dependent on solvent polarity. In acetonitrile/water mixtures with a high dielectric constant, colloidal nanoparticles with nanophase-separated internal lamellar structures quickly formed, which gradually turned into one-dimensional nanobelt crystals upon aging, while stacked crystalline lamellae were dominantly observed in less polar methanol/chloroform solutions. When the crystallizable BPOSS was replaced with noncrystallizable cyclohexyl-functionalized CPOSS, the resulting KPOM-CPOSS also formed colloidal spheres; however, it failed to further evolve into crystalline nanobelt structures. In less polar solvents, KPOM-CPOSS crystallized into isolated two-dimensional nanosheets, which were composed of two inner crystalline layers of Keggin POM covered by two monolayers of amorphous CPOSS. In contrast, self-assembly of KPOM-2BPOSS was dominated by crystallization of the BPOSS cages, which was hardly sensitive to solvent polarity. The BPOSS cages formed the crystalline inner bilayer, sandwiched by two outer layers of Keggin POM clusters. These results illustrate a rational strategy to purposely fabricate self-assembled nanostructures with diverse dimensionality from MJPs with controlled molecular composition and topology.