Steering CO2 electroreduction pathway toward ethanol via surface-bounded hydroxyl species-induced noncovalent interaction.

Selective electroreduction of carbon dioxide (CO2RR) into ethanol at an industrially relevant current density is highly desired. However, it is challenging because the competing ethylene production pathway is generally more thermodynamically favored. Herein, we achieve a selective and productive ethanol production over a porous CuO catalyst that presents a high ethanol Faradaic efficiency (FE) of 44.1 ± 1.0% and an ethanol-to-ethylene ratio of 1.2 at a large ethanol partial current density of 501.0 ± 15.0 mA cm-2, in addition to an extraordinary FE of 90.6 ± 3.4% for multicarbon products. Intriguingly, we found a volcano-shaped relationship between ethanol selectivity and nanocavity size of porous CuO catalyst in the range of 0 to 20 nm. Mechanistic studies indicate that the increased coverage of surface-bounded hydroxyl species (*OH) associated with the nanocavity size-dependent confinement effect contributes to the remarkable ethanol selectivity, which preferentially favors the *CHCOH hydrogenation to *CHCHOH (ethanol pathway) via yielding the noncovalent interaction. Our findings provide insights in favoring the ethanol formation pathway, which paves the path toward rational design of ethanol-oriented catalysts.

Rational Design of F-Modified Polyester Electrolytes for Sustainable All-Solid-State Lithium Metal Batteries.

Solid polymer electrolytes (SPEs) are one of the most practical candidates for solid-state batteries owing to their high flexibility and low production cost, but their application is limited by low Li+ conductivity and a narrow electrochemical window. To improve performance, it is necessary to reveal the structure-property relationship of SPEs. Here, 23 fluorinated linear polyesters were prepared by editing the coordination units, flexible linkage segments, and interface passivating groups. Besides the traditionally demonstrated coordinating capability and flexibility of polymer chains, the molecular asymmetry and resulting interchain aggregation are observed critical for Li+ conductivity. By tailoring the molecular asymmetry and coordination ability of polyesters, the Li+ conductivity can be raised by 10 times. Among these polyesters, solvent-free poly(pentanediol adipate) delivers the highest room-temperature Li+ conductivity of 0.59 × 10-4 S cm-1. The chelating coordination of oxalate and Li+ leads to an electron delocalization of alkoxy oxygen, enhancing the antioxidation capability of SPEs. To lower the cost, high-value LiTFSI in SPEs is recycled at 90%, and polyesters can be regenerated at 86%. This work elucidates the structure-property relationship of polyester-based SPEs, displays the design principles of SPEs, and provides a way for the development of sustainable solid-state batteries.

In Situ Infrared Spectroscopic Evidence of Enhanced Electrochemical CO2 Reduction and C-C Coupling on Oxide-Derived Copper.

The reaction mechanism of CO2 electroreduction on oxide-derived copper has not yet been unraveled even though high C2+ Faradaic efficiencies are commonly observed on these surfaces. In this study, we aim to explore the effects of copper anodization on the adsorption of various CO2RR intermediates using in situ surface-enhanced infrared absorption spectroscopy (SEIRAS) on metallic and mildly anodized copper thin films. The in situ SEIRAS results show that the preoxidation process can significantly improve the overall CO2 reduction activity by (1) enhancing CO2 activation, (2) increasing CO uptake, and (3) promoting C-C coupling. First, the strong *COO- redshift indicates that the preoxidation process significantly enhances the first elementary step of CO2 adsorption and activation. The rapid uptake of adsorbed *COatop also illustrates how a high *CO coverage can be achieved in oxide-derived copper electrocatalysts. Finally, for the first time, we observed the formation of the *COCHO dimer on the anodized copper thin film. Using DFT calculations, we show how the presence of subsurface oxygen within the Cu lattice can improve the thermodynamics of C2 product formation via the coupling of adsorbed *CO and *CHO intermediates. This study advances our understanding of the role of surface and subsurface conditions in improving the catalytic reaction kinetics and product selectivity of CO2 reduction.

Immobilizing Ordered Oxophilic Indium Sites on Platinum Enabling Efficient Hydrogen Oxidation in Alkaline Electrolyte.

Addressing the sluggish kinetics in the alkaline hydrogen oxidation reaction (HOR) is a pivotal yet challenging step toward the commercialization of anion-exchange membrane fuel cells (AEMFCs). Here, we have successfully immobilized indium (In) atoms in an orderly fashion into platinum (Pt) nanoparticles supported by reduced graphene oxide (denoted as O-Pt3In/rGO), significantly enhancing alkaline HOR kinetics. We have revealed that the ordered atomic matrix enables uniform and optimized hydrogen binding energy (HBE), hydroxyl binding energy (OHBE), and carbon monoxide binding energy (COBE) across the catalyst. With a mass activity of 2.3066 A mg-1 at an overpotential of 50 mV, over 10 times greater than that of Pt/C, the catalyst also demonstrates admirable CO resistance and stability. Importantly, the AEMFC implementing this catalyst as the anode catalyst has achieved an impressive power output compared to Pt/C. This work not only highlights the significance of constructing ordered oxophilic sites for alkaline HOR but also sheds light on the design of well-structured catalysts for energy conversion.

Polyarylene-Based Anion Exchange Membranes for Fuel Cells.

Anion exchange membrane fuel cell (AEMFC) is an emerging and promising technology that can help realize a carbon-neutral, sustainable economy. Also, compared to the proton exchange membrane counterpart, AEMFC can achieve comparable cell outputs with lower costs due to the applicability of non-platinum group metal electrocatalysts for the reaction on the electrodes' surfaces. However, the wide application of the AEMFCs has been impeded by the unsatisfactory stability and performance of the hydroxide-conductive membranes in the past. Recently researchers have made breakthroughs using polyarylene (PA)-based AEMs. This article summarizes the recent advances of a class of AEMs with aromatic backbone without ether bonds, mainly synthesized by Friedel-Crafts polycondensation. Such PA-based AEMs showed high chemical/mechanical stabilities and ionic conductivity, and even the fuel cell with those AEMs showed impressive peak power density of up to 2.58 W cm-2. In this concept article, we classify major strategies for making PA-based AEMs to show the recent trends, highlight synthesis, characterization, and properties, and provide a brief outlook.

Cu-Doped Iron Oxide for the Efficient Electrocatalytic Nitrate Reduction Reaction.

The electrochemical nitrate reduction reaction (NO3RR) is a promising alternative synthetic route for sustainable ammonia (NH3) production, because it not only eliminates nitrate (NO3-) from water but also produces NH3 under mild operating conditions. However, owing to the complicated eight-electron reaction and the competition from the hydrogen evolution reaction, developing catalysts with high activities and Faradaic efficiencies (FEs) is highly imperative to improve the reaction performance. In this study, Cu-doped Fe3O4 flakes are fabricated and demonstrated to be excellent catalysts for electrochemical conversion of NO3- to NH3, with a maximum FE of ∼100% and an NH3 yield of 179.55 ± 16.37 mg h-1 mgcat-1 at -0.6 V vs RHE. Theoretical calculations reveal that doping the catalyst surface with Cu results in a more thermodynamically facile reaction. These results highlight the feasibility of promoting the NO3RR activity using heteroatom doping strategies.

The Electrode/Electrolyte Interface Study during the Electrochemical CO2 Reduction in Acidic Electrolytes.

Electrochemical CO2 Reduction (CO2R) in acidic electrolytes has gained significant attention owing to higher carbon efficiency and stability than in alkaline counterparts. However, the proton source and the role of alkali cations for CO2R are still under debate. By using rotating ring disk electrode and surface-enhanced infrared absorption spectroscopy, we find that a neutral/alkaline environment at the interface is necessary for CO2R even in acidic electrolytes. We also confirm that water molecules, rather than protons serve as the proton source for CO2R. Alkali cations in the outer Helmholtz plane activate H2O and promote the desorption of adsorbed carbon monoxide. Additionally, the solvated CO2, or CO2(aq), is the actual reactant for CO2R. This study provides a deeper understanding of the electrode/electrolyte interface during CO2R in acidic electrolytes and sheds light on further performance improvement of this system.

Grain-growth Inhibitor with Three-section-sintering for Highly Dispersed Single-crystal NCM90 Cubes.

Single crystallization of LiNix Coy Mn1-x-y O2 (NCM) is currently an effective strategy to improve the cycling life of NCM cathode, owing to the reduced surface area and enhanced mechanical strength, but the application of single crystal NCM(SC-NCM) is being hindered by severe particle agglomeration and poor C-rate performance. Here, a strategy of three-section-sintering(TSS) with the presence of grain-growth inhibitor was proposed, in which, the TSS includes three sections of phase-formation, grain-growth and phase-preservation. While, the addition of MoO3 inhibits the grain growth and restrains the particle agglomeration. With the help of TSS and 1 mol % of MoO3 , highly dispersed surface Mo-doped SC-NCM(MSC-NCM) cubes are obtained with the average diameter of 1.3 µm. Benefiting from the surface Mo-doping and the reduced surface energy, the Li+ -migration preferred (1 0 4) crystalline facet is exposed as the dominant plane in MSC-NCM cubes, because of which, C-rate performance is significantly improved compared with the regular SC-NCM. Furthermore, this preparation strategy is compatible well with the current industrial production line, providing an easy way for the large-scale production of SC-NCM.

High-Performance Ammonia Electrosynthesis from Nitrate in a NaOH-KOH-H2O Ternary Electrolyte.

A glut of dinitrogen-derived ammonia (NH3) over the past century has resulted in a heavily imbalanced nitrogen cycle and consequently, the large-scale accumulation of reactive nitrogen such as nitrates in our ecosystems has led to detrimental environmental issues. Electrocatalytic upcycling of waste nitrogen back into NH3 holds promise in mitigating these environmental impacts and reducing reliance on the energy-intensive Haber-Bosch process. Herein, we report a high-performance electrolyzer using an ultrahigh alkalinity electrolyte, NaOH-KOH-H2O, for low-cost NH3 electrosynthesis. At 3,000 mA/cm2, the device with a Fe-Cu-Ni ternary catalyst achieves an unprecedented faradaic efficiency (FE) of 92.5±1.5 % under a low cell voltage of 3.83 V; whereas at 1,000 mA/cm2, an FE of 96.5±4.8 % under a cell voltage of only 2.40 V was achieved. Techno-economic analysis revealed that our device cuts the levelized cost of ammonia electrosynthesis by ~40 % ($30.68 for Fe-Cu-Ni vs. $48.53 for Ni foam per kmol-NH3). The NaOH-KOH-H2O electrolyte together with the Fe-Cu-Ni ternary catalyst can enable the high-throughput nitrate-to-ammonia applications for affordable and scalable real-world wastewater treatments.

Fluorine-Doped Carbon Support Enables Superfast Oxygen Reduction Kinetics by Breaking the Scaling Relationship.

It is well-established that Pt-based catalysts suffer from the unfavorable linear scaling relationship (LSR) between *OOH and *OH (ΔG(*OOH)=ΔG(*OH)+3.2±0.2 eV) for the oxygen reduction reaction (ORR), resulting in a great challenge to significantly reduced ORR overpotentials. Herein, we propose a universal and feasible strategy of fluorine-doped carbon supports, which optimize interfacial microenvironment of Pt-based catalysts and thus significantly enhance their reactive kinetics. The introduction of C-F bonds not only weakens the *OH binding energy, but also stabilizes the *OOH intermediate, resulting in a break of LSR. Furthermore, fluorine-doped carbon constructs a local super-hydrophobic interface that facilitates the diffusion of H2O and the mass transfer of O2. Electrochemical tests show that the F-doped carbon-supported Pt catalysts exhibit over 2-fold higher mass activities than those without F modification. More importantly, those catalysts also demonstrate excellent stability in both rotating disk electrode (RDE) and membrane electrode assembly (MEA) tests. This study not only validates the feasibility of tuning the electrocatalytic microenvironment to improve mass transport and to break the scaling relationship, but also provides a universal catalyst design paradigm for other gas-involving electrocatalytic reactions.

A Sulfur-Doped Copper Catalyst with Efficient Electrocatalytic Formate Generation during the Electrochemical Carbon Dioxide Reduction Reaction.

Catalysts involving post-transition metals have shown almost invincible performance on generating formate in electrochemical CO2 reduction reaction (CO2 RR). Conversely, Cu without post-transition metals has struggled to achieve comparable activity. In this study, a sulfur (S)-doped-copper (Cu)-based catalyst is developed, exhibiting excellent performance in formate generation with a maximum Faradaic efficiency of 92 % and a partial current density of 321 mA cm-2 . Ex situ structural elucidations reveal the presence of abundant grain boundaries and high retention of S-S bonds from the covellite phase during CO2 RR. Furthermore, thermodynamic calculations demonstrate that S-S bonds can moderate the binding energies with various intermediates, further improving the activity of the formate pathway. This work is significant in modifying a low-cost catalyst (Cu) with a non-metallic element (S) to achieve comparable performance to mainstream catalysts for formate generation in industrial grade.

The Role of Phase Mixing Degree in Promoting C-C Coupling in Electrochemical CO2 Reduction Reaction on Cu-based Catalysts.

Cu-based catalysts have been identified as the most promising candidates for generation of C2+ products in electrochemical CO2 reduction reaction. Defect engineering in catalysts is a widely employed strategy for promoting C-C coupling on Cu. However, comprehensive understanding of defect structure-to-activity relationship has not been obtained. In this study, controllable defects generation is achieved, which leads to a series of Cu-based catalysts with various phase mixing degrees. It is observed that the Faradaic efficiency toward C2+ products increases with the phase mixing degree, reaching 81 % at maximum. In situ infrared absorption spectroscopy reveals that the catalysts with higher phase mixing degree tend to form *CO more easily and possess higher retention of *CO under high overpotential window, thereby promoting C-C coupling. This work sheds new light on the relationship between defects and C-C coupling, and the rational developed of more advanced Cu-base catalysts.

Meso/Microporous Single-Atom Catalysts with Curved Fe-N4 sites Boost the Oxygen Reduction Reaction Activity.

Zeolitic-imidazolate frameworks (ZIFs) are among the most efficient precursors for the synthesis of atomically dispersed Fe-N/C materials, which are promising catalysts for enhancing the performance of Zn-air batteries (ZABs) and proton exchange fuel cells (PEMFCs). However, existing ZIF-derived Fe-N/C electrocatalysts mostly consist of microporous materials, leading to insufficient mass transport and inadequate battery/cell performance. In this study, we synthesize an atomically dispersed meso/microporous Fe-N/C material with curved Fe-N4 active sites, denoted as FeSA-N/TC, through the pyrolysis of hemin-modified ZIF films on ZnO nanorods, obtained from the self-assembly reaction between Zn2+ from ZnO hydrolysis and 2-methylimidazole. Density functional theory calculations demonstrate that the curved Fe-N4 active sites can weaken the intermediate adsorptions, resulting in lower free energy barriers and enhanced performance during oxygen reduction reaction (ORR). Specifically, FeSA-N/TC exhibits exceptional ORR performance with half-wave potentials of 0.925 V in alkaline media and 0.825 V in acidic media. When used as the cathodic catalyst in PEMFCs and ZABs, FeSA-N/TC achieves high peak power densities (H2-O2 PEMFC: 1100 mW cm-2; H2-Air PEMFC: 715 mW cm-2; liquid-state ZAB: 228 mW cm-2; solid-state ZAB: 112 mW cm-2), demonstrating its feasibility and efficiency in practical applications.

Benzoic Acid: Electrode-Regenerated Molecular Catalyst to Boost Cycloolefin Epoxidation.

Stoichiometric oxidants are always consumed in organic oxidation reactions. For example, olefins react with peroxy acids to be converted to epoxy, while the oxidant, peroxy acid, is downgraded to carboxylic acid. In this paper, we aim to regenerate carboxylic acid into peroxy acid through electric water splitting at the anode, in order to construct an electrochemical catalytic cycle to accomplish the cycloolefin epoxidation reaction. Benzoic acid, which can be strongly adsorbed onto the anode and rapidly converted to peroxy acid, was selected to catalyze the cycloolefin epoxidation. Furthermore, the peroxybenzoic acid will be further activated on the electrode to fulfill the epoxidation and release the benzoic acid to complete the catalytic cycle. In this designed reaction cycle, benzoic acid acts as a molecular catalyst with the assistance of the electrode-generated reactive oxygen species (ROS). This method can successfully reform the consumable oxidants to molecular catalysts, which can be generalized to other green organic syntheses.

Sub-3 nm Pt@Ru toward Outstanding Hydrogen Oxidation Reaction Performance in Alkaline Media.

Anion-exchange membrane fuel cells (AEMFCs) are promising alternative hydrogen conversion devices. However, the sluggish kinetics of the hydrogen oxidation reaction in alkaline media hinders further development of AEMFCs. As a synthesis method commonly used to prepare disordered PtRu alloys, the impregnation process is ingeniously designed herein to synthesize sub-3 nm Pt@Ru core-shell nanoparticles by sequentially reducing Pt and Ru at different annealing temperatures. This method avoids complex procedures and synthesis conditions for organic synthesis systems, and the atomic structure evolution of the synthesized core-shell nanoparticles can be tracked. The synthesized Pt@Ru electrocatalyst shows an ultrasmall average size of ∼2.5 nm and thereby a large electrochemical surface area (ECSA) of 166.66 m2 gPt+Ru-1. Exchange current densities (j0) normalized to the mass (Pt + Ru) and ECSA of this electrocatalyst are 8.0 and 5.8 times as high as those of commercial Pt/C, respectively. To the best of our knowledge, the achieved mass-normalized j0 measured by rotating disk electrodes is the highest reported so far. The membrane electrode assembly test of the Pt@Ru electrocatalyst shows a peak power density of 1.78 W cm-2 (0.152 mgPt+Ru cmanode-2), which is higher than that of commercial PtRu/C (1.62 W cm-2, 0.211 mgPt+Ru cmanode-2). The improvement of the intrinsic activity can be attributed to the electron transfer from the Ru shell to the Pt core, and the ultrafine particles further enhance the mass activity. This work reveals the feasibility of using simple impregnation to synthesize fine core-shell nanocatalysts and the importance of investigating the atomic structure of PtRu nanoparticles and other disordered alloys.

Bismuth Ferrite as an Electrocatalyst for the Electrochemical Nitrate Reduction.

Electrochemical nitrate reduction has become an appealing "waste-to-wealth" approach for sustainable NH3 synthesis owing to its mild operating conditions. However, developing catalysts with high activities and Faradaic efficiencies for this complicated eight-electron reaction is a great challenge. Herein, bismuth ferrite (BiFeO3) flakes, with a distorted perovskite-type structure, are demonstrated to be excellent catalysts for electrochemical NH3 synthesis via nitrate reduction, with a maximum Faradaic efficiency of 96.85%, NH3 yield of 90.45 mg h-1 mgcat-1, at -0.6 V vs. reversible hydrogen electrode. During the nitrate reduction reaction, the crystalline BiFeO3 rapidly converts into an amorphous phase, which is stable in the long term reaction. These results open a new window for rational design of more active and durable electrocatalysts.

Enhancing Local CO2 Adsorption by L-histidine Incorporation for Selective Formate Production Over the Wide Potential Window.

Electrochemical carbon dioxide reduction reaction (CO2 RR) to produce valuable chemicals is a promising pathway to alleviate the energy crisis and global warming issues. However, simultaneously achieving high Faradaic efficiency (FE) and current densities of CO2 RR in a wide potential range remains as a huge challenge for practical implements. Herein, we demonstrate that incorporating bismuth-based (BH) catalysts with L-histidine, a common amino acid molecule of proteins, is an effective strategy to overcome the inherent trade-off between the activity and selectivity. Benefiting from the significantly enhanced CO2 adsorption capability and promoted electron-rich nature by L-histidine integrity, the BH catalyst exhibits excellent FEformate in the unprecedented wide potential windows (>90 % within -0.1--1.8 V and >95 % within -0.2--1.6 V versus reversible hydrogen electrode, RHE). Excellent CO2 RR performance can still be achieved under the low-concentration CO2 feeding (e.g., 20 vol.%). Besides, an extremely low onset potential of -0.05 VRHE (close to the theoretical thermodynamic potential of -0.02 VRHE ) was detected by in situ ultraviolet-visible (UV-Vis) measurements, together with stable operation over 50 h with preserved FEformate of ≈95 % and high partial current density of 326.2 mA cm-2 at -1.0 VRHE .

MXene-Regulated Metal-Oxide Interfaces with Modified Intermediate Configurations Realizing Nearly 100% CO2 Electrocatalytic Conversion.

Electrocatalytic CO2 reduction via renewable electricity provides a sustainable way to produce valued chemicals, while it suffers from low activity and selectivity. Herein, we constructed a novel catalyst with unique Ti3 C2 Tx MXene-regulated Ag-ZnO interfaces, undercoordinated surface sites, as well as mesoporous nanostructures. The designed Ag-ZnO/Ti3 C2 Tx catalyst achieves an outstanding CO2 conversion performance of a nearly 100% CO Faraday efficiency with high partial current density of 22.59 mA cm-2 at -0.87 V versus reversible hydrogen electrode. The electronic donation of Ag and up-shifted d-band center relative to Fermi level within MXene-regulated Ag-ZnO interfaces contributes the high selectivity of CO. The CO2 conversion is highly correlated with the dominated linear-bonded CO intermediate confirmed by in situ infrared spectroscopy. This work enlightens the rational design of unique metal-oxide interfaces with the regulation of MXene for high-performance electrocatalysis beyond CO2 reduction.

Sustainable and High-Rate Electrosynthesis of Nitrogen Fertilizer.

The conventional industrial production of nitrogen-containing fertilizers, such as urea and ammonia, relies heavily on energy-intensive processes, accounting for approximately 3 % of global annual CO2 emissions. Herein, we report a sustainable electrocatalytic approach that realizes direct and selective synthesis of urea and ammonia from co-reduction of CO2 and nitrates under ambient conditions. With the assistance of a copper (Cu)-based salphen organic catalyst, outstanding urea (3.64 mg h-1 mgcat -1 ) and ammonia (9.73 mg h-1 mgcat -1 ) yield rates are achieved, in addition to a remarkable Faradaic efficiency of 57.9±3 % for the former. This work proposes an appealing sustainable route to converting greenhouse gas and waste nitrates by renewable energies into value-added fertilizers.

Slowly Removing Surface Ligand by Aging Enhances the Stability of Pd Nanosheets toward Electron Beam Irradiation and Electrocatalysis.

Surface ligands play an important role in shape-controlled growth and stabilization of colloidal nanocrystals. Their quick removal tends to cause structural deformation and/or aggregation to the nanocrystals. Herein, we demonstrate that the surface ligand based on poly(vinylpyrrolidone) (PVP) can be slowly removed from Pd nanosheets (NSs, 0.93±0.17 nm in thickness) by simply aging the colloidal suspension. The aged Pd NSs show well-preserved morphology, together with significantly enhanced stability toward both e-beam irradiation and electrocatalysis (e.g., ethanol oxidation). It is revealed that the slow desorption of PVP during aging forces the re-exposed Pd atoms to reorganize, facilitating the surface to transform from being nearly perfect to defect-rich. The resultant Pd NSs with abundant defects no longer rely on surface ligand to stabilize the atomic arrangement and thus show excellent structural and electrochemical stability. This work provides a facile and effective method to maintain the integrity of colloidal nanocrystals by slowly removing the surface ligand.