Nanoarchitectonics of Three-Dimensional Carbon Nanofiber-Supported Hollow Copper Sulfide Spheres for Asymmetric Supercapacitor Applications.

Three-dimensional carbon nanofiber (3D-CNF)-supported hollow copper sulfide (HCuS) spheres were synthesized by the facile hydrothermal method. The morphology of the as-synthesized HCuS@3D-CNF composite clearly revealed that the 3D-CNFs act as a basement for HCuS spheres. The electrochemical performance of as-synthesized HCuS@3D-CNFs was evaluated by cyclic voltammetry (CV) tests, gravimetric charge-discharge (GCD) tests, and Nyquist plots. The obtained results revealed that the HCuS@3D-CNFs exhibited greater areal capacitance (4.6 F/cm2) compared to bare HCuS (0.64 F/cm2) at a current density of 2 mA/cm2. Furthermore, HCuS@3D-CNFs retained excellent cyclic stability of 83.2% after 5000 cycles. The assembled asymmetric device (HCuS@3D-CNFs//BAC) exhibits an energy density of 0.15 mWh/cm2 with a working potential window of 1.5 V in KOH electrolyte. The obtained results demonstrate that HZnS@3D-CNF nanoarchitectonics is a potential electrode material for supercapacitor applications.

Community perception and prioritization of invasive alien plants in Chitwan-Annapurna Landscape, Nepal.

The management of invasive species is a complex, yet an essential component of biodiversity conservation and environmental management for sustainable futures. Despite a well-established linkage between biological invasions and human activities, the social dimension of invasive species management is less explored as compared to the ecological aspects. In recent years, the active participation of local communities, such as assessing levels of awareness and the selection of targeted species prioritized by communities, has been considered as a crucial element for managing invasive species. We conducted 32 focus group discussions (FGDs) including 218 participants in Chitwan-Annapurna Landscape (ChAL) of central Nepal, to assess knowledge and perceptions of agrarian and forest-dependent communities about invasive alien plants (IAPs), document the efforts of the community management of IAPs and prioritize IAPs for management. In the prioritization exercise, participants of each FGD were asked to rank three IAPs using scoring methods and to express their experience about the effects of the selected IAPs on humans and the environment. We found that communities had a living memory of the arrival of some of the IAPs in their locality without knowing the exotic nature of IAPs. Biodiversity loss, livestock poisoning, reduced agricultural production and forage supply, and negative impact on forest regeneration were reported as major negative impacts of IAPs. Communities also reportedly utilized IAPs for medicinal purposes, making compost by using biomass, and controlling floods and landslides. None of the government and non-governmental organizations working in the sectors of biodiversity conservation and environmental management has informed local forest-dependent agrarian communities about the consequences of biological invasions and management of IAPs. However, local communities had already started controlling the spread of some IAPs through manual uprooting. They were able to spot, identify and prioritize IAPs for management and some of the prioritized species were among the world's worst invasive species. Ageratum houstonianum was the top-ranked worst invasive species in agroecosystems while Chromolaena odorata and Ageratina adenophora were the top-ranked worst species in natural ecosystems. Our findings will be useful for guiding community education programs as well as the management of IAPs through formal policy and management plans, such as Nepal's National Biodiversity Strategy and Action Plan.

One-step hydrothermal synthesis of CuS/MoS2 composite for use as an electrochemical non-enzymatic glucose sensor.

Early diagnosis may be crucial for the prevention of chronic diabetes mellitus. For that herein, we prepared a CuS/MoS2 composite for a non-enzymatic glucose sensor through a one-step hydrothermal method owing to the synergetic effect of CuS/MoS2. The surface morphology of CuS/MoS2 was studied by Field Emission Scanning Electron Microscopy (FESEM) and Cs-corrected Scanning Transmission Electron Microscopy (Cs-STEM). The crystallinity and surface composition of CuS/MoS2 were analyzed by X-ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) respectively. The working electrode was prepared from CuS/MoS2 electrocatalyst, and for that dispersed solution of electrocatalyst was used to fabricate the material-loaded glassy carbon electrode (GC). CuS/MoS2 composite shows the viability of electrocatalyst to oxidize glucose in an alkaline solution with sensitivity and detection limit of 252.71 µA mM-1 cm-2 and 1.52 µM respectively. The proposed glucose sensor showed reasonable stability and potential selectivity during electrochemical analysis. Accordingly, the CuS/MoS2 composite has potential as a viable material for glucose sensing in diluted human serum.

Copper nanoparticles/polyaniline/molybdenum disulfide composite as a nonenzymatic electrochemical glucose sensor.

A Cu@Pani/MoS2 nanocomposite was successfully synthesized via combined in-situ oxidative polymerization and hydrothermal reaction and applied to an electrochemical nonenzymatic glucose sensor. The morphology of the prepared Cu@Pani/MoS2 nanocomposite was characterized using FE-SEM and Cs-STEM, and electrochemical analysis was performed using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry techniques. Electrostatic interaction between Cu@Pani and MoS2 greatly enhanced the charge dispersion, electrical conductivity, and stability, resulting in excellent electrochemical performance. The Cu@Pani/MoS2 was used as an electrocatalyst to detect glucose in an alkaline medium. The proposed glucose sensor exhibited a sensitivity, detection limit, and wide linear range of 69.82 µAmM-1cm-2, 1.78 µM, and 0.1-11 mM, respectively. The stability and selectivity of the Cu@Pani/MoS2 composite for glucose compared to that of the potential interfering species, as well as its ability to determine the glucose concentration in diluted human serum samples at a high recovery percentage, demonstrated its viability as a nonenzymatic glucose sensor.

Chitosan polymer matrix-derived nanocomposite (CuS/NSC) for non-enzymatic electrochemical glucose sensor.

In this study, N and S co-doped chitosan polymer matrix-derived composite (CuS/NSC) was synthesized via a one-step hydrothermal technique using a low-cost copper complex of chitosan polymer. Cyclic voltammetry and chronoamperometry revealed excellent electrocatalytic performance. The glucose sensor exhibited a linear range of 160 µM to 11.76 mM, a low detection limit 2.72 µM and a sensitivity of 13.62 mA mM-1 cm-2 with an excellent linear response. Furthermore, the sensor also displayed selectivity for glucose over potential interfering agents and exhibited a satisfactory recovery percentage using real sample in human serum. The results demonstrate that, CuS/NSC is an efficient nanocomposite material for non-enzymatic glucose sensors and is applicable for glucose detection in biological fluids.

Diabetes and hypertension in urban bhutanese men and women.

BACKGROUND: Bhutan is a mountainous country with 31% urban population. There is no information on prevalence of diabetes and hypertension in Bhutan yet. This was the first study of its kind conducted in the capital city. OBJECTIVE: To determine prevalence of diabetes, impaired fasting glucose (IFG), impaired glucose tolerance (IGT) and hypertension in urban Bhutanese population aged 25 to 74 years. MATERIALS AND METHODS: Stratified two-stage sampling was adopted to include 2474 respondents (Males: 1132, Females: 1342) equally distributed among different age and sex groups. A questionnaire containing demographic, educational and social details and history of diabetes and hypertension was administered on the sampled population the previous evening and blood pressure measured the next morning in nearby camp where fasting blood samples were collected and an oral glucose tolerance test done. RESULTS: Age and sex standardized prevalence of diabetes, IGT and IFG were 8.2.0, 21.6 and 4%, respectively. Only 66.5% of the population had normal blood sugar. Prevalence of diabetes and IGT increased progressively with increasing age. Prevalence of hypertension was 26% (Males: 28.3%, Females: 23.2%). It was observed that 54.1% of diabetes population had hypertension. CONCLUSION: The study shows that not only is prevalence of diabetes and hypertension high in the urban Bhutanese but also there is a high diagnosis and treatment gap in these disorders.