RESUMEN
The synthesis of transition metal nitrides nanocrystals (TMNs NCs) has posed a significant challenge due to the limited reactivity of nitrogen sources at lower temperatures and the scarcity of available synthesis methods. In this study, we present a novel colloidal synthesis strategy for the fabrication of Cu3N nanorods (NRs). It is found that the trace oxygen (O2) plays an important role in the synthesis process. And a new mechanism for the formation of Cu3N is proposed. Subsequently, by employing secondary lateral epitaxial growth, the Cu3N-Cu2O heteronanostructures (HNs) can be prepared. The Cu3N NRs and Cu3N-Cu2O HNs were evaluated as precursor electrocatalysts for the CO2 reduction reaction (CO2RR). The Cu3N-Cu2O HNs demonstrate remarkable selectivity and stability with ethylene (C2H4) Faradaic efficiency (FE) up to 55.3%, surpassing that of Cu3N NRs. This study provides innovative insights into the reaction mechanism of colloidal synthesis of TMNs NCs and presents alternative options for designing cost-effective electrocatalysts to achieve carbon neutrality.
RESUMEN
OBJECTIVE: Acute mesenteric vein thrombosis (AMVT) is an acute abdominal disease with onset, rapid progression, and extensive intestinal necrosis that requires immediate surgical resection. The purpose of this study was to determine the risk factors for nosocomial intestinal resection in patients with AMVT. METHODS: We retrospectively analysed 64 patients with AMVT diagnosed by CTA at the Affiliated Hospital of Kunming University of Science and Technology from January 2013 to December 2021. We compared patients who underwent intestinal resection (42 patients) with those who did not undergo intestinal resection (22 patients). The area under the ROC curve was evaluated, and a forest map was drawn. RESULTS: Among the 64 patients, 6 (9.38%) had a fever, 60 (93.75%) had abdominal pain, 9 (14.06%) had a history of diabetes, 8 (12.5%) had a history of deep vein thrombosis (DVT), and 25 (39.06%) had ascites suggested by B ultrasound or CT after admission. The mean age of all patients was 49.86 ± 16.25 years. The mean age of the patients in the enterectomy group was 47.71 ± 16.20 years. The mean age of the patients in the conservative treatment group (without enterectomy) was 53.95 ± 15.90 years. In the univariate analysis, there were statistically significant differences in leukocyte count (P = 0.003), neutrophil count (P = 0.001), AST (P = 0.048), total bilirubin (P = 0.047), fibrinogen (P = 0.022) and DD2 (P = 0.024) between the two groups. The multivariate logistic regression analysis showed that admission white blood cell count (OR = 1.153, 95% CI: 1.039-1.280, P = 0.007) was an independent risk factor for intestinal resection in patients with AMVT. The ROC curve showed that the white blood cell count (AUC = 0.759 95% CI: 0.620-0.897; P = 0.001; optimal threshold: 7.815; sensitivity: 0.881; specificity: 0.636) had good predictive value for emergency enterectomy for AMVT. CONCLUSIONS: Among patients with AMVT, patients with a higher white blood cell count at admission were more likely to have intestinal necrosis and require emergency enterectomy. This study is helpful for clinicians to accurately determine whether emergency intestinal resection is needed in patients with AMVT after admission, prevent further intestinal necrosis, and improve the prognosis of patients.
Asunto(s)
Isquemia Mesentérica , Trombosis , Humanos , Adulto , Persona de Mediana Edad , Anciano , Estudios Retrospectivos , Venas Mesentéricas/cirugía , Enfermedad Aguda , Pronóstico , Isquemia Mesentérica/cirugía , Recuento de Leucocitos , Trombosis/complicaciones , Necrosis , Curva ROCRESUMEN
Sub-1-nm structures are attractive for diverse applications owing to their unique properties compared to those of conventional nanomaterials. Transition-metal hydroxides are promising catalysts for oxygen evolution reaction (OER), yet there remains difficulty in directly fabricating these materials within the sub-1-nm regime, and the realization of their composition and phase tuning is even more challenging. Here we define a binary-soft-template-mediated colloidal synthesis of phase-selective Ni(OH)2 ultrathin nanosheets (UNSs) with 0.9 nm thickness induced by Mn incorporation. The synergistic interplay between binary components of the soft template is crucial to their formation. The unsaturated coordination environment and favorable electronic structures of these UNSs, together with in situ phase transition and active site evolution confined by the ultrathin framework, enable efficient and robust OER electrocatalysis. They exhibit a low overpotential of 309 mV at 100 mA cm-2 as well as remarkable long-term stability, representing one of the most high-performance noble-metal-free catalysts.
RESUMEN
Postsynthetic chemical transformation provides a powerful platform for creating heteronanostructures (HNs) with well-defined materials and interfaces that generate synergy or enhancement. However, it remains a synthetic bottleneck for the precise construction of HNs with increased degrees of complexity and more elaborate functions in a predictable manner. Herein, we define a general transformative protocol for metal phosphosulfide HNs based on tunable hexagonal Cu1.81S frameworks with corner-, edge- and face-controlled growth of Co2P domains. The region-controlled Cu1.81S-Co2P framework interfaces can serve as "kinetic barriers" in mediating the direction and rate between P and S anion exchange reactions, thus leading to a family of morphology and phase designed Cu3P1-xSx-Co2P HNs with hollow (branched, dotted and crown), porous and core-shell architectures. This study reveals the internal transformation mechanism between metal sulfide and phosphide nanocrystals, and opens up a new way for the rational synthesis of metastable HNs that are otherwise inaccessible.
RESUMEN
Ruthenium (Ru)-based materials, as a class of efficient hydrogen evolution reaction (HER) catalysts, play an important role in hydrogen generation by electrolysis of water in an alkaline solution for clean hydrogen energy. Hybrid nanostructure (HN) materials, which include two or more components with distinct functionality, show better performance than their individual materials, since HN materials can potentially integrate their advantages and overcome the weaknesses. However, it remains a challenge to construct Ru-based HN materials with desired crystal phases for enhanced HER performances. Herein, a series of new Ru-based HN materials (t-Ru-RuS2, S-Ru-RuS2, and T-Ru-RuS2) through phase engineering of nanomaterials (PEN) and chemical transformation are designed to achieve highly efficient HER properties. Owing to the plentiful formation of heterojunctions and amorphous/crystalline interfaces, the t-Ru-RuS2 HN delivers the most outstanding overpotential of 16 mV and owns a small Tafel slope of 29 mV dec-1 at a current density of 10 mA cm-2, which exceeds commercial Pt/C catalysts (34 mV, 38 mV dec-1). This work shows a new insight for HN and provides alternative opportunities in designing advanced electrocatalysts with low cost for HER in the hydrogen economy.
RESUMEN
The design and synthesis of advanced semiconductors is crucial for the full utilization of solar energy. Herein, colloidal selective-epitaxial hybrid of tripartite semiconducting sulfides CuInS2 Cd(In)SMoS2 heteronanostructures (HNs) via lateral- and vertical-epitaxial growths, followed by cation exchange reactions, are reported. The lateral-epitaxial CuInS2 and Cd(In)S enable effective visible to near-infrared (NIR) solar spectrum absorption, and the vertical-epitaxial ultrathin MoS2 offer sufficient edge sulfur sites for the hydrogen evolution reaction (HER). Furthermore, the integrated structures exhibit unique epitaxial-staggered type II band alignments for continuous charge separation. They achieve the H2 evolution rate up to 8 mmol h-1 g-1 , which is ≈35 times higher than bare CdS and show no deactivation after long-term cycling, representing one of the most efficient and robust noble-metal-free photocatalysts. This design principle and transformation protocol open a new way for creating all-in-one multifunctional catalysts in a predictable manner.
RESUMEN
The broad applications of 3D-printed poly-ether-ether-ketone (3D-PEEK) structures are largely hampered by their inadequate mechanical properties that can be improved by post treatments. At present, thermal annealing is generally used to improve the mechanical properties of 3D-PEEK. However, it cannot simultaneously improve strength and ductility. Here, a cost-effective postprocessing method is developed to improve the mechanical properties of 3D-PEEK, based on annealing in nonsolvent vapor at room temperature. The annealing in nonsolvent vapor at room temperature simultaneously improves the strength, ductility, and fracture energy of as-printed 3D-PEEK by 22.6%, 151.3%, and 109.1%, respectively. The improved mechanical properties are attributed to enhanced interfacial bonding, increased crystallinity, decreased pinhole defects, and stress relaxation in the 3D-PEEK. Moreover, the annealing in both polar solvents (such as acetone and chloroform) and nonpolar solvents (such as n-hexane) are demonstrated to be effective for improving the mechanical properties of 3D-PEEK. The nonsolvent vapor-annealed 3D-PEEK can thus have potential applications in the fields of medical implants, automotive, aerospace, and more.
Asunto(s)
Polietilenglicoles , Impresión Tridimensional , Benzofenonas , Cetonas/química , Polietilenglicoles/química , PolímerosRESUMEN
The metastable nature of metal chalcogenide nanomaterials (MCNs) provides us with fresh perspectives and plentiful grounds in the search of new strategies for physicochemical tuning. In the past decade, numerous efforts have been devoted to synthesizing and modifying diverse emerging MCNs based on their "soft chemistry", that is, gently regulating the composition, structure, phase, and interface while not entirely disrupting the original features. This tutorial review focuses on design principles based on the metastability of MCNs, such as ion mobility and vacancy, thermal and structural instability, chemical reactivity, and phase transition, together with corresponding soft chemical approaches, including ion-exchange, catalytic growth, segregation or coupling, template grafting or transformation, and crystal-phase engineering, and summarizes recent advances in their preparation and modification. Finally, prospects for the future development of soft chemistry-directed synthetic guidelines and metastable metal chalcogenide-derived nanomaterials are proposed and highlighted.
RESUMEN
The boron carbide (B4C) nanoparticles doping mesophase pitch (MP) was synthesized by the in-situ doping method with tetrahydrofuran solvent, and the corresponding MP-based carbon fibers (CFs) were successfully prepared through the melt-spinning, stabilization, carbonization and graphitization processes. The structural evolution and properties of boron-containing pitches and fibers in different processes were investigated for exploring the effect of B4C on mechanical, electrical and thermal properties of CFs. The results showed that the B4C was evenly dispersed in pitch fibers to provide active sites of oxygen, resulting in a homogeneous stabilization and ameliorating the split-ting microstructures of CFs. Moreover, the thermal conductivity of B1-MP-CF prepared with 1 wt.% B4C increased to 1051 W/mâ¢K, which was much higher than that of B0-MP-CF prepared without B4C (659 W/mâ¢K). While the tensile strength of B4C-doped CFs was lower than that of pristine CFs. In addition, a linear relationship equation between the graphite microcrystallite parameter (ID/IG) calculated from Raman spectra and the thermal conductivity (λ) calculated according to the electrical resistivity was found, which was beneficial to understand the thermal properties of CFs. Therefore, the doping B4C nanoparticles in MP did play a significant role in reducing the graphitization temperatures due to the boron catalytic graphitization but decreasing the mechanical properties due to the introduction of impurities.
RESUMEN
Chinese medicine undergoes complex chemical changes during processing and identifying these changes is the key to the processing mechanism. In the past 20 years of the 21 st century, research on the chemical changes in Chinese medicine after processing has focused the changes in the biopharmaceutical process in addition to the variation during processing. With the surging of information technologies, various identification technologies(instrumental analysis techniques, molecular biological techniques, data mining techniques, and biotransformation techniques) have developed rapidly and been widely applied to the research on processing mechanism. Thus, based on the chemical changes in the processing and biopharmaceutical process, the author suggested a research tactic of multimodal identification as the core by reorganizing key technologies for chemical identification from studies of the processing mechanism of Chinese me-dicine, aiming at establishing an interdisciplinary multi-dimensional research model for the processing mechanism of Chinese medicine.
Asunto(s)
Medicamentos Herbarios Chinos , Medicina Tradicional China , Medicamentos Herbarios Chinos/química , TecnologíaRESUMEN
Clarifying the mechanisms of Chinese medicinal processing is pivotal to the modernization of Chinese medicine. Research on Chinese medicinal processing gives priority to the mechanisms of the processing in enhancing efficacy, reducing toxicity, and repurposing medicinals. During the past 20 years, scholars have carried out in-depth studies on the mechanisms of Chinese medicinal processing via modern system biology. They mainly focused on the changes of medicinal properties and efficacy caused by processing using techniques of modern pharmacology and molecular biology, spectrum-efficacy correlation, and biophoton emission. However, these techniques fail to reflect the holistic view of traditional Chinese medicine. With the introduction of system biology, multi-omics techno-logies(genomics, transcriptomics, proteomics, and metabolomics) have surged, which have been applied to the research on the mec-hanisms of Chinese medicinal processing. These multi-omics technologies have advantages in the research on holism. This study aims to summarize the research techniques and approaches in system biology for mechanisms of Chinese medicinal processing in the past 20 years and analyze the limitations and advantages of them. It is concluded that the multi-omics techniques of system biology can reconstruct the mechanisms of Chinese medicinal processing. This study provides a new direction for further research on the mechanisms of Chinese medicinal processing.
Asunto(s)
Medicina Tradicional China , Metabolómica , China , Genómica , Metabolómica/métodos , ProteómicaRESUMEN
Engineering nanoheterostructures (NHs) plays a key role in exploring novel or enhanced physicochemical properties of nanocrystals. Despite previously reported synthetic methodologies, selective synthesis of NHs to achieve the anticipated composition and interface is still challenging. Herein, we presented a colloidal strategy for the regioselective construction of typical Ag-Co2P NHs with precisely controlled location of Ag nanoparticles (NPs) on unique chemically transformed Co2P nanorods (NRs) by simply changing the ratio of different surfactants. As a proof-of-concept study, the constructed heterointerface-dependent hydrogen evolution reaction (HER) catalysis was demonstrated. The multiple Ag NP-tipped Co2P NRs exhibited the best HER performance, due to their more exposed active sites and the synergistic effect at the interfaces. Our results open up new avenues in rational design and fabrication of NHs with delicate control over the spatial distribution and interfaces between different components.
RESUMEN
Switchable structured adhesion on rough surfaces is highly desired for a wide range of applications. Combing the advantages of gecko seta and creeper root, a switchable fibrillar adhesive composed of polyurethane (PU) as the backing layer and graphene/shape memory polymer (GSMP) as the pillar array is developed. The photothermal effect of graphene (under UV irradiation) changes GSMP micropillars into the viscoelastic state, allowing easy and intimate contact on surfaces with a wide range of roughness. By controlling the phase state of GSMP via UV irradiation during detachment, the GSMP micropillar array can be switched between the robust-adhesion state (UV off) and low-adhesion state (UV on). The state of GSMP micropillars determines the adhesion force capacity and the stress distribution at the detaching interface, and therefore the adhesion performance. The PU-GSMP adhesive achieves large adhesion strength (278 kPa), high switching ratio (29), and fast switching (10 s) at the same time. The results suggest a design principle for bioinspired structured adhesives, especially for reversible adhesion on surfaces with a wide range of roughness.
RESUMEN
BACKGROUND: Diabetes is one of the biggest medical challenges worldwide. The key to efficiently treat type 1 diabetes is to accurately inject insulin according to the blood glucose levels. In this study, we aimed to develop an intelligent insulin-releasing gold nanocluster system that responds to environmental glucose concentrations. RESULTS: We employed gold nanoclusters (AuNCs) as a novel carrier nanomaterial by taking advantage of their high drug-loading capacity. We prepared AuNCs in the protection of bovine serum albumin, and we decorated AuNCs with 3-aminophenylboronic acid (PBA) as a glucose-responsive factor. Then we grafted insulin onto the surface to obtain the glucose-responsive insulin-releasing system, AuNC-PBA-Ins complex. The AuNC-PBA-Ins complex exhibited high sensitivity to glucose concentration, and rapidly released insulin in high glucose concentration in vitro. In the type 1 diabetic mouse model in vivo, the AuNC-PBA-Ins complex effectively released insulin and regulated blood glucose level in the normoglycemic state for up to 3 days. CONCLUSIONS: We successfully developed a phenylboronic acid-functionalized gold nanocluster system (AuNC-PBA-Ins) for responsive insulin release and glucose regulation in type 1 diabetes. This nanocluster system mimics the function of blood glucose regulation of pancreas in the body and may have potential applications in the theranostics of diabetes.
Asunto(s)
Diabetes Mellitus Tipo 1/tratamiento farmacológico , Oro/química , Hipoglucemiantes/administración & dosificación , Insulina/administración & dosificación , Nanopartículas del Metal/química , Animales , Glucemia/análisis , Ácidos Borónicos/química , Bovinos , Hipoglucemiantes/química , Insulina/química , Masculino , Ratones Endogámicos C57BL , Albúmina Sérica Bovina/químicaRESUMEN
OBJECTIVE: This study aims to investigate the association of filamin A with the function and morphology of prostate cancer (PCa) cells, and explore the role of filamin A in the development of PCa, in order to analyze its significance in the evolvement of PCa. MATERIALS AND METHODS: A stably transfected cell line, in which filamin A expression was suppressed by RNA interference, was first established. Then, the effects of the suppression of filamin A gene expression on the biological characteristics of human PCa LNCaP cells were observed through cell morphology, in vitro cell growth curve, soft agar cloning assay, and scratch test. RESULTS: A cell line model with a low expression of filamin A was successfully constructed on the basis of LNCaP cells. The morphology of cells transfected with plasmid pSilencer-filamin A was the following: Cells were loosely arranged, had less connection with each other, had fewer tentacles, and presented a fibrous look. The growth rate of LNCap cells was faster than cells transfected with plasmid pSilencer-filamin A (P<0.05). The clones of LNCap cells in the soft agar cloning assay was significantly fewer than that of cells stably transfected with plasmid pSilencer-filamin A (P<0.05). Cells stably transfected with plasmid pSilencer-filamin A presented with a stronger healing and migration ability compared to LNCap cells (healing rate was 32.2% and 12.1%, respectively; P<0.05). CONCLUSION: The expression of the filamin A gene inhibited the malignant development of LNCap cells. Therefore, the filamin A gene may be a tumor suppressor gene.
Asunto(s)
Filaminas/análisis , Filaminas/fisiología , Neoplasias de la Próstata/patología , Western Blotting , Línea Celular Tumoral , Proliferación Celular , Células Cultivadas , Colorimetría/métodos , Filaminas/genética , Formazáns , Humanos , Masculino , Plásmidos , Neoplasias de la Próstata/genética , Sales de Tetrazolio , Factores de Tiempo , Transfección/métodos , Cicatrización de Heridas/fisiologíaRESUMEN
Recent studies have shown that L-carnitine supplementation of sows during pregnancy and lactation enhances their reproductive performance, but the underlying mechanisms are still needed to be further confirmed. This study was conducted to investigate the function of L-carnitine on placental development, milk nutrient content and release of hormones in sows. In this experiment, 40 multiparous crossbred sows (Yorkshire × Landrace) were allotted to two groups fed diets with or without a supplemental 50 mg/kg L-carnitine. The experimental diets were fed from d 1 post-coitus until d 21 post-partum. L-carnitine-treated sow had fewer weak piglets (p < 0.05) and a greater percentage of oestrus by 5 after 5-d post-partum (p < 0.05) than control sows. The percentage fat from colostrum was greater in L-carnitine-treated sow than control sows (p < 0.05). L-carnitine-treated sows had greater plasma concentrations of triglyceride and insulin-like growth factor (IGF)-1 and lesser plasma concentrations of glucose and IGF-binding protein (IGFBP-3) on day 60 of pregnancy (p < 0.05). A clearer structure of chorions, better-developed capillaries and absence of necrosis were observed in L-carnitine-treated sows compared with control sows. The protein abundance of IGF-1 and IGF-2 in placental chorions was greater in L-carnitine-treated sows compared with control sows (p < 0.05). This study suggests that sows fed an L-carnitine supplemented diet during pregnancy improved reproductive performance through enhancement of placental development and by increasing IGF concentrations in blood plasma and placental chorions.
Asunto(s)
Carnitina/metabolismo , Corion/efectos de los fármacos , Factor I del Crecimiento Similar a la Insulina/metabolismo , Leche/química , Placentación/efectos de los fármacos , Reproducción/efectos de los fármacos , Porcinos/fisiología , Alimentación Animal/análisis , Fenómenos Fisiológicos Nutricionales de los Animales/efectos de los fármacos , Animales , Carnitina/administración & dosificación , Corion/química , Dieta/veterinaria , Suplementos Dietéticos/análisis , Femenino , Leche/efectos de los fármacos , EmbarazoRESUMEN
Heteronanostructures have attracted intensive attention due to their electronic coupling effects between distinct components. Despite tremendous advances of nanostructure fabrication, combining independent polymorphs by forming heterojunction is still challenging but fascinating, such as copper sulfides (Cu2-xS), exhibiting varying band gaps and crystal structures with various stoichiometries. Herein, self-coupled Cu2-xS polymorphs (Cu1.94S-CuS) by a facile one-pot chemical transformation route have been reported for the first time. Unprecedentedly, a manganous precursor plays a crucial role in inducing and directing the formation of such a dumbbell-like architecture, which combines 1D Cu1.94S with 2D CuS. During the transformation, Mn2+ ions mediate the Cu+ ions diffusion and phase conversion process particularly. Furthermore, this self-coupled polymorphic structure exhibits significantly enhanced photoelectrochemical properties compared with the individual Cu1.94S nanocrystals and CuS nanoplates, originating from the unique heterointerfaces constructed by intrinsic band alignment and the enhanced contact between high conductivity hexagonal planes and the working electrode revealed by density functional theory (DFT) calculations. So we anticipate this emerging interfacial charge separation could provide useful hints for applications in optoelectronic devices or photocatalysis.
RESUMEN
From the standpoint of chemistry, the metastable nature of nanocrystals provides us plentiful ground for the research of new nanoscale structural transformations. Herein, we report a new phenomenon that trialkylphosphine (TAP) can extract the Ag(+) and Bi(3+) from their nanostructural chalcogenides and reduce them to the zerovalent state. Based on this principle, a trialkylphosphine-driven chemical transformation route has been developed for the synthesis of a series of metals and metal-sulfide heterostructures with multiple sulfides as the precursors. Using this reaction principle, Ag, Bi, Ag-Ni3S2, Ag-ZnS, Ag-AgInS2, Ag-Bi, and Bi-Cu7S4 nanostructures can be successively synthesized. These Ag- or Bi-based metal chalcogenide heteronanostructures with interesting optical properties or multifunctionalities could be of special interest for a variety of applications, including high-performance catalysis, biological and biomedical sensing, photovoltaic devices, and a new generation of optoelectronic devices.
RESUMEN
Mesophase pitch is usually prepared by radical polymerization or catalytic polymerization from coal tar, petroleum, and aromatic compounds, and the catalytic synthesis of mesophase pitch from pure aromatic compounds is more controllable in the preparation of high-quality mesophase pitch. However, the corrosive and highly toxic nature of the catalyst has limited the further development of this method. In this study, mesophase pitch was synthetized using ethylene tar and naphthalene as raw materials and boron trifluoride diethyl etherate as a catalyst. The effect of the catalytic reaction on the structure and properties of the mesophase pitch was investigated. The results show that naphthalene plays an important role in the mesophase content and reaction pressure (from above 6 MPa to 2.35 MPa). Mesophase pitch with fine-flow texture can be prepared by introducing more methylene groups, naphthenic structures, and aliphatic hydrocarbons during synthesis. Carbon fibers prepared from mesophase pitch show a split structure, and the thermal conductivity is 730 W/(m·K). This work provides theoretical support for lower toxicity and causticity and for reaction-controlled technology for the synthesis of high-purity mesophase pitch.
RESUMEN
Objectives: To assess the serum visfatin levels in patients with ankylosing spondylitis (AS), as well as its correlation with fat deposition of the lumbar spine. Methods: Serum visfatin levels were detected by enzyme-linked immunosorbent assay (ELISA) in 50 AS patients and 75 sex-and age-matched healthy controls. The clinical and laboratory indexes of AS patients were recorded, and the lumbar spine magnetic resonance scan was performed to evaluate the lumbar spine fat deposition in AS patients. The level of serum visfatin and its correlation with lumbar fat deposition were analyzed, and the risk factors of AS lumbar MRI fat deposition were evaluated by Logistic regression. Results: Serum visfatin levels in AS patients were elevated compared with that in healthy controls (p < 0.001), and were more significant in patients with fat deposition and syndesmophyte formation (p = 0.017 and p = 0.014, respectively). Serum visfatin levels were positively correlated with CRP, BASDAI, mSASSS and fat deposition (all p < 0.05). Age (OR = 1.085, 95% CI: 1.005-1.173, p = 0.038), disease duration (OR = 1.267, 95% CI: 1.017-1.578, p = 0.035), and visfatin (OR = 1.846, 95% CI: 1.004-3.393, p = 0.048) were risk factors for fat deposition in AS patients. Conclusions: The level of serum visfatin in AS patients is significantly increased, which is associated with fat deposition on lumbar MRI. Elevated visfatin level is an independent risk factor for AS lumbar fat deposition.