Total Hip Arthroplasty and the Spinopelvic Relationship: What's the Latest!

Although total hip arthroplasty (THA) has proved to be a successful surgical procedure, both prosthetic and bone impingement resulting in dislocation continue to occur. Studies have shown that spine pathology resulting in lumbar stiffness and hip arthritis often coexist. Spinopelvic mobility patterns during postural changes affect three-dimensional acetabular component position, which affects the incidence of prosthetic impingement and THA instability. Several spinopelvic risk factors that may affect THA stability have been identified. Numerous reports recommend performing a preoperative spinopelvic mobility analysis to identify risk factors and adjust acetabular component position accordingly to lessen the risk of impingement. In doing so, acetabular component position is individualized based on spinopelvic mobility patterns. Additionally, functional femoral anteversion, affected by individual femoral rotation patterns during dynamic activities, may contribute to the incidence of impingement. It is important to review the interrelationship between spine and pelvic mobility and how it relates to THA and may reduce the incidence of instability.

Patient-reported impairment following TKA is reduced when a computationally simulated predicted ideal alignment is achieved.

PURPOSE: Joint dynamics following Total Knee Arthroplasty (TKA) may influence patient-reported outcome. Simulations allow many knee alignment approaches to a single patient to be considered prior to surgery. The simulated kinematics can be matched to patient-reported outcome to predict kinematic patterns most likely to give the best outcome. This study aims to validate one such previously developed algorithm based on a simulated deep knee bend (the Dynamic Knee Score, DKS). METHODS: 1074 TKA patients with pre- and post-operative Computerised Tomography (CT) scans and 12-month post-operative Knee Injury and Osteoarthritis Outcomes (KOOS) Scores were identified from the 360 Med Care Joint Registry. Landmarking and registration of implant position was performed on all CT scans, and each of the achieved TKAs was computationally simulated and received a predictive outcome score from the DKS. In addition, a set of potential alternative surgical plans which might have been followed were simulated. Comparison of patient-reported issues and DKS score was evaluated in a counter-factual study design. RESULTS: Patient-reported impairment with the knee catching and squatting was shown to be 30% lower (p = 0.005) and 22% lower (p = 0.026) in patients where the best possible DKS result was the one surgically achieved. Similar findings were found relating attainment of the best tibial slope and posterior femoral resection DKS plans to patient-reported difficulty straightening the knee (40% less likely, p < 0.001) and descending stairs (35% less likely, p = 0.006). CONCLUSION: The DKS has been shown to correlate with presence of patient-reported impairments post-TKA and the resultant algorithm can be applied in a pre-operative planning setting. Outcome optimization in the future may come from patient-specific selection of an alignment strategy and simulations may be a technological enabler of this trend. LEVEL OF EVIDENCE: III (Retrospective Cohort Study).

Sacral Slope Change From Standing to Relaxed-Seated Grossly Overpredicts the Presence of a Stiff Spine.

BACKGROUND: Several authors propose that a change in sacral slope of ≤10° between the standing and relaxed-seated positions (ΔSSstanding→relaxed-seated) identifies a patient with a stiff lumbar spine and has suggested the use of dual-mobility bearings for such patients undergoing a total hip arthroplasty (THA). The aim of this study was to assess how accurately ΔSSstanding→relaxed-seated can identify patients with a stiff spine. METHODS: A prospective, multicentre, consecutive cohort series of 312 patients had standing, relaxed-seated, and flexed-seated lateral radiographs prior to THA. ΔSSstanding→relaxed-seated was determined by the change in sacral slope between the standing and relaxed-seated positions. Lumbar flexion (LF) was defined as the difference in lumbar lordotic angle between standing and flexed-seated. LF ≤20° was considered a stiff spine. The predictive value of ΔSSstanding→relaxed-seated for characterizing a stiff spine was assessed. RESULTS: A weak correlation between ΔSSstanding→relaxed-seated and LF was identified (r2 = 0.13). Eighty six patients (28%) had ΔSSstanding→relaxed-seated ≤10° and 19 patients (6%) had a stiff spine. Of the 86 patients with ΔSSstanding→relaxed-seated ≤10°, 13 had a stiff spine. The positive predictive value of ΔSSstanding→relaxed-seated ≤10° for identifying a stiff spine was 15%. CONCLUSION: In this cohort, ΔSSstanding→relaxed-seated ≤10° was not correlated with a stiff spine. Using this simplified approach could lead to a 7-fold overprediction of patients with a stiff lumbar spine and abnormal spinopelvic mobility, unnecessary use of dual-mobility bearings, and incorrect component alignment targets. Referring to patients with ΔSSstanding→relaxed-seated ≤10° as being stiff is misleading. The flexed-seated position should be used to effectively assess a patient's spine mobility prior to THA.

The Effect of a Degenerative Spine and Adverse Pelvic Mobility on Prosthetic Impingement in Patients Undergoing Total Hip Arthroplasty.

BACKGROUND: Despite the placement of acetabular components in the traditional "safe-zone", dislocations and all parts of the instability spectrum, including impingement, continue to be an issue. Recent research has established the importance of a degenerative spine and adverse pelvic mobility on functional acetabular orientation. The purpose of this study is to quantify the clinical consequences of a degenerative spine and adverse pelvic mobility on prosthetic impingement in patients undergoing total hip arthroplasty. METHODS: Between January 2018 and December 2019, a series of 1592 patients undergoing total hip arthroplasty had functional lateral radiographs and a computed tomography scan taken. Two spinal parameters and 2 pelvic mobility parameters were investigated for their association with impingement. Each patient was evaluated for anterior and posterior impingement, at all orientations within a traditional supine safe zone and a patient-specific functional safe zone. RESULTS: Patients with limited lumbar flexion (stiff spine), higher pelvic incidence-lumbar lordosis mismatch (sagittal imbalance), and more anterior pelvic mobility from stand to flexed-seated, exhibit increased anterior impingement. Patients with larger posterior pelvic mobility from supine-to-stand exhibited increased posterior impingement. Impingement was reduced 3-fold when the target cup orientation was tailored to a patient's functional safe zone rather than a generic target. Six percent of patients showed unavoidable impingement even with an optimized functional cup orientation. CONCLUSION: Our results support growing evidence that patients with a degenerative spine and adverse pelvic mobility are likely to have unfavorable functional cup orientations, resulting in prosthetic impingement. Preoperative functional radiographic screening is recommended to assess the likelihood of a patient experiencing impingement due to their unique spinopelvic mobility.

Prevalence of Risk Factors for Adverse Spinopelvic Mobility Among Patients Undergoing Total Hip Arthroplasty.

BACKGROUND: Patients with adverse spinopelvic mobility have higher complication rates following total hip arthroplasty (THA). Risk factors include a stiff lumbar spine, standing posterior pelvic tilt ≤ -10°, and a severe sagittal spinal deformity (pelvic incidence minus lumbar lordosis mismatch ≥20°). The purpose of this study is to define the spinopelvic risk factors and quantify the prevalence of risk factors for pathologic spinopelvic mobility. METHODS: A retrospective cohort analysis from January 2014 to February 2020 was performed on a multicenter series of 9414 primary THAs by 168 surgeons, all with preoperative spinopelvic measurements in the supine, standing, and flex-seated positions. All patients were included. The prevalence of adverse spinopelvic mobility and frequency of each spinopelvic risk factor was calculated. RESULTS: The cohort was 52% female, 48% male, with an average age of 65 years. Thirteen percent of patients exhibited adverse spinopelvic mobility and 17% had one or more of the 3 risk factors. Adverse mobility was found in 35% of patients with at least 1 risk factor, 47% with at least 2 risk factors, and 57% with all 3 risk factors. CONCLUSION: Forty-six percent of patients had spinopelvic pathology driven by one or more of the risk factors. Number of risk factors present and risk of adverse spinopelvic mobility were positively correlated, with 57% of patients with all 3 risk factors exhibiting adverse spinopelvic mobility. Although this study defines the prevalence of these risk factors in this highly selected cohort, it does not report incidence in a general THA population. LEVEL OF EVIDENCE: Prognostic Level IV.

Prevalence of Sagittal Spinal Deformity Among Patients Undergoing Total Hip Arthroplasty.

BACKGROUND: The important relationship between sagittal spinal alignment and total hip arthroplasty (THA) is becoming well recognized. Prior research has shown a significant relationship between sagittal spinal deformity (SSD) and THA instability. This study aims at determining the prevalence of SSD among preoperative THA patients. METHODS: A multicenter database of preoperative THA patients was analyzed. Radiographic parameters measured from standing radiographs included anterior pelvic plane tilt, spinopelvic tilt, and lumbar lordosis (LL); pelvic incidence (PI) was measured from computed tomography scans. Lumbar flatback was defined as PI-LL mismatch >10°, balanced as PI-LL of -10° to 10°, and hyperlordosis as PI-LL <-10°. RESULTS: A total of 1088 patients were analyzed (mean, 64 years; 48% female). And 59% (n = 644) of patients had balanced alignment, 16% (n = 174) had a PI-LL > 10°, and 4% (n = 46) had a PI-LL > 20° (severe flatback deformity). The prevalence of hyperlordosis was 25% (n = 270). Flatback patients tended to be older than balanced and hyperlordotic patients (69.5 vs 64.0 vs 60.8 years, P < .001). Spinopelvic tilt was more posterior in flatback compared to balanced and hyperlordotic patients (24.7° vs 15.4° vs 7.0°) as was anterior pelvic plane tilt (-7.1° vs -2.0° vs 2.5°) and PI (64.1° vs 56.8° vs 49.0°), all P < .001. CONCLUSION: Only 59% of patients undergoing THA have normally aligned lumbar spines. Flatback SSD was observed in 16% (4% with severe flatback deformity) and there was a 25% prevalence of hyperlordosis. Lumbar flatback was associated with increasing age, posterior pelvic tilt, and larger PI. The relatively high prevalence of spinal deformity in this population reinforces the importance of considering spinopelvic alignment in THA planning and risk stratification.

The Majority of Total Hip Arthroplasty Patients With a Stiff Spine Do Not Have an Instrumented Fusion.

BACKGROUND: Total hip arthroplasty (THA) patients with limited lumbar flexion (LF) have increased rates of dislocation. An instrumented spinal fusion is a well-recognized cause whose risk increases with increasing number of levels fused. However, many patients without an instrumented fusion (IF) also exhibit abnormal spinopelvic mobility. The purpose of this study was to understand the proportion of THA patients without an IF that have a stiff spine (SS) and behave as if they are surgically fused. METHODS: A retrospective analysis was performed on 6340 primary THA patients, all of whom had preoperative spinopelvic measurements. Any IF of the lumbar spine was observed on the lateral standing radiograph and recorded. SS was classified by LF ≤ 20°, and the percentage of patients with an IF and limited LF was determined. RESULTS: Three hundred fifty-six (6%) patients had a SS, and only 67 (19%) had an IF. Of the entire 6340 patients, 207 (3%) had an IF. Of these 207, only 67 (32%) had a SS. CONCLUSIONS: The vast majority (81%) of THA patients with a SS do not have an IF. We recommend preoperative spinopelvic assessment of all patients undergoing THA, as only a minority of those with limited LF have an IF and may otherwise be overlooked. Lumbar degenerative disc disease is common in THA patients, limits the available LF in the same way an IF might and potentially increases the risk of dislocation in this subset of patients. LEVEL OF EVIDENCE: III.

Effects of Sagittal Spinal Alignment on Postural Pelvic Mobility in Total Hip Arthroplasty Candidates.

BACKGROUND: Recent research has demonstrated that patients with reduced pelvic mobility from standing to sitting have higher rates of dislocation after total hip arthroplasty (THA). This study evaluates the effect of sagittal spinal deformity, defined by pelvic incidence-lumbar lordosis mismatch (PI-LL), on postural changes in pelvic tilt (PT). METHODS: A multicenter database of 1100 preoperative THA patients was queried. Anterior-pelvic-plane tilt (APPt), spinopelvic tilt (SPT), and LL were measured from radiographs of patients in supine, standing, flexed-seated, and stepping-up postures; PI was measured from computed tomography. Patients were separated into 3 groups based on PI-LL (<-10°, -10° to 10°, >10°) and propensity-score matched by PI. Lumbar flatback-deformity was defined as PI-LL > 10°, hyperlordosis: PI-LL < -10°. SPT/APPt, including changes between each posture were compared across PI-LL groups using analysis of variance, with post-hoc Tukey tests. Pearson correlations were reported when testing associations between SPT/APPt change and PI-LL. RESULTS: After propensity-score matching, 288 patients were analyzed (mean 65 y; 49% F). SPT and APPt change differed across all PI-LL categories from standing to seated, supine, and stepping-up with less SPT/APPt recruitment among hyperlordotic vs flatback patients (all P < .001). Greater PI-LL correlated with greater SPT recruitment from standing to seated (R = 0.294), supine (R = 0.292), and stepping-up (R = 0.207) (all P < .001). Smaller LL changes from standing to seated were associated with greater SPT recruitment (R = 0.372, P < .001). CONCLUSIONS: Postural changes in SPT/APPt are associated with spinopelvic measures in THA candidates. Hyperlordotic patients tend to utilize their spines more compared with flatback patients who were more likely to recruit PT. Increased focus on patients with lumbar flatback and hyperlordosis may help in reducing prosthetic dislocation prevalence following THA.

Is Cemented or Cementless Femoral Stem Fixation More Durable in Patients Older Than 75 Years of Age? A Comparison of the Best-performing Stems.

BACKGROUND: There is ongoing debate concerning the best method of femoral fixation in older patients receiving primary THA. Clinical studies have shown high survivorship for cemented and cementless femoral stems. Arthroplasty registry studies, however, have universally shown that cementless stems are associated with a higher rate of revision in this patient population. It is unclear if the difference in revision rate is a reflection of the range of implants being used for these procedures rather than the mode of fixation. QUESTIONS/PURPOSES: (1) Is the risk of revision higher in patients older than 75 years of age who receive one of the three cementless stems with the highest overall survivorship in the registry than in those of that age who received one of the three best-performing cemented stems? If so, is there a difference in risk of early revision versus late revision, defined as revision within 1 month after index surgery? (2) Are there any diagnoses (such as osteoarthritis [OA] or femoral neck hip fracture) in which the three best-performing cementless stems had better survivorship than one of the three best-performing cementless stems? (3) Do these findings change when evaluated by patient sex? METHODS: The Australian Orthopaedic Association National Joint Replacement Registry data were used to identify the best three cemented and the best three cementless femoral stems. The criteria for selection were the lowest 10-year revision rate and use in > 1000 procedures in this age group of patients regardless of primary diagnosis. The outcome measure was time to first revision using Kaplan-Meier estimates of survivorship. Comparisons were made for THAs done for any reason and then specifically for OA and femoral neck fracture separately. RESULTS: Overall, the cumulative percent revision in the first 3 months postoperatively was lower among those treated with one of the three best-performing cemented stems than those treated with one of the three best-performing cementless stems (hazard ratio [HR] for best three cementless versus best three cemented = 3.47 [95% confidence interval {CI}, 1.60-7.53], p = 0.001). Early revision was 9.14 times more common in the best three cementless stems than in the best three cemented stems (95% CI, 5.54-15.06, p = 0.001). Likewise, among patients with OA and femoral neck fracture, the cumulative percent revision was consistently higher at 1 month postoperatively among those treated with one of the three best-performing cementless stems than those treated with one of the three best-performing cementless stems (OA: HR for best three cementless versus best three cemented = 8.82 [95% CI, 5.08-15.31], p < 0.001; hip fracture: HR for best 3 cementless versus best three cemented = 27.78 [95% CI, 1.39-143.3], p < 0.001). Overall, the cumulative percent revision was lower in the three best cemented stem group than the three best cementless stem group for both males and females at 1 month postoperatively (male: HR = 0.42 [95% CI, 0.20-0.92], p = 0.030; female: HR = 0.06 [95% CI, 0.03-0.10], p < 0.001) and for females at 3 months postoperatively (HR = 0.15 [95% CI, 0.06-0.33], p < 0.001), after which there was no difference. CONCLUSIONS: Cementless femoral stem fixation in patients 75 years or older is associated with a higher early rate of revision, even when only the best-performing prostheses used in patients in this age group were compared. Based on this review of registry data, it would seem important to ensure the proper training of contemporary cementing techniques for the next generation of arthroplasty surgeons so they are able to use this option when required. However, the absence of a difference in the two groups undergoing THA after 3 months suggests that there can be a role for cementless implants in selected cases, depending on the surgeon's expertise and the quality and shape of the proximal femoral bone. LEVEL OF EVIDENCE: Level III, therapeutic study.

Excessive posterior pelvic tilt from preoperative supine to postoperative standing after total hip arthroplasty.

Aims: Excessive posterior pelvic tilt (PT) may increase the risk of anterior instability after total hip arthroplasty (THA). The aim of this study was to investigate the changes in PT occurring from the preoperative supine to postoperative standing position following THA, and identify factors associated with significant changes in PT. Methods: Supine PT was measured on preoperative CT scans and standing PT was measured on preoperative and one-year postoperative standing lateral radiographs in 933 patients who underwent primary THA. Negative values indicate posterior PT. Patients with > 13° of posterior PT from preoperative supine to postoperative standing (ΔPT ≤ -13°) radiographs, which corresponds to approximately a 10° increase in functional anteversion of the acetabular component, were compared with patients with less change (ΔPT > -13°). Logistic regression analysis was used to assess preoperative demographic and spinopelvic parameters predictive of PT changes of ≤ -13°. The area under receiver operating characteristic curve (AUC) determined the diagnostic accuracy of the predictive factors. Results: PT changed from a mean of 3.8° (SD 6.0°)) preoperatively to -3.5° (SD 6.9°) postoperatively, a mean change of -7.4 (SD 4.5°; p < 0.001). A total of 95 patients (10.2%) had ≤ -13° change in PT from preoperative supine to postoperative standing. The strongest predictive preoperative factors of large changes in PT (≤ -13°) from preoperative supine to postoperative standing were a large posterior change in PT from supine to standing, increased supine PT, and decreased standing PT (p < 0.001). Flexed-seated PT (p = 0.006) and female sex (p = 0.045) were weaker significant predictive factors. When including all predictive factors, the accuracy of the AUC prediction was 84.9%, with 83.5% sensitivity and 71.2% specificity. Conclusion: A total of 10% of patients had > 13° of posterior PT postoperatively compared with their supine pelvic position, resulting in an increased functional anteversion of > 10°. The strongest predictive factors of changes in postoperative PT were the preoperative supine-to-standing differences, the anterior supine PT, and the posterior standing PT. Surgeons who introduce the acetabular component with the patient supine using an anterior approach should be aware of the potentially large increase in functional anteversion occurring in these patients.

Registry-based study of survivorship of cemented femoral components versus collared cementless femoral components in total hip arthroplasty in older patients with osteoarthritis.

Aims: In recent years, the use of a collared cementless femoral prosthesis has risen in popularity. The design intention of collared components is to transfer some load to the resected femoral calcar and prevent implant subsidence within the cancellous bone of the metaphysis. Conversely, the load transfer for a cemented femoral prosthesis depends on the cement-component and cement-bone interface interaction. The aim of our study was to compare the three most commonly used collared cementless components and the three most commonly used tapered polished cemented components in patients aged ≥ 75 years who have undergone a primary total hip arthroplasty (THA) for osteoarthritis (OA). Methods: Data from the Australian Orthopaedic Association National Joint Replacement Registry from 1 September 1999 to 31 December 2022 were analyzed. Collared cementless femoral components and cemented components were identified, and the three most commonly used components in each group were analyzed. We identified a total of 11,278 collared cementless components and 47,835 cemented components. Hazard ratios (HRs) from Cox proportional hazards models, adjusting for age and sex, were obtained to compare the revision rates between the groups. Results: From six months postoperatively onwards, patients aged ≥ 75 years undergoing primary THA with primary diagnosis of OA have a lower risk of all-cause revision with collared cementless components than with a polished tapered cemented component (HR 0.78 (95% confidence interval 0.64 to 0.96); p = 0.018). There is no difference in revision rate prior to six months. Conclusion: Patients aged ≥ 75 years with a primary diagnosis of OA have a significantly lower rate of revision with the most common collared cementless femoral component, compared with the most common polished tapered cemented components from six months postoperatively onwards. The lower revision rate is largely due to a reduction in revisions for fracture and infection.

Large diameter metal on metal articulations. Comparison of total hip arthroplasty and hip resurfacing arthroplasty.

The use of large diameter metal bearing total hip arthroplasty (THA) and hip resurfacing arthroplasty (HRA) increased in popularity in the last decade. More recent literature has highlighted the effect of head size in patient outcomes. Data was obtained from the Australian Orthopaedic Association National Joint Replacement Registry (AOA-NJRR) to evaluate the Birmingham (MoM) bearing surface when used with THA and HRA. There is no difference in the overall rate of revision between the THA and HRA but head size has a significant effect on revision rate. The data show that small diameter metal bearings in HRA (below 50mm) have a higher rate of revision than large diameter metal bearings in HRA (equal to and above 50mm) (P<.001). Conversely the large diameter metal bearings in THA have a higher rate of revision than the small diameter metal bearings in THA (P=.027). The revision rate for large diameter HRA compared to small diameter THA is not significantly different P=.670. We recommend caution when choosing either a large diameter (≥50mm) metal on metal THA or small diameter (<50mm) HRA.

Birmingham Hip Resurfacing at 20 years.

Aims: The Birmingham Hip Resurfacing (BHR) arthroplasty has been used as a surgical treatment of coxarthrosis since 1997. We present 20-year results of 234 consecutive BHRs performed in our unit. Methods: Between 1999 and 2001, there were 217 patients: 142 males (65.4%), mean age 52 years (18 to 68) who had 234 implants (17 bilateral). They had patient-reported outcome measures collected, imaging (radiograph and ultrasound), and serum metal ion assessment. Survivorship analysis was performed using Kaplan-Meier estimates. Revision for any cause was considered as an endpoint for the analysis. Results: Mean follow-up was 20.9 years (19.3 to 22.4). Registry data revealed that 19 hips (8.1%) had been revised and 26 patients (12%) had died from causes unrelated to the BHR. Among the remaining 189 hips, 61% were available for clinical follow-up at 20 years (n = 115) and 70% of patients had biochemical follow-up (n = 132). The cumulative implant survival rate at 20 years for male patients was 96.5% (95% confidence interval (CI) 93.5 to 99.6), and for female patients 87% (95% CI 79.7 to 94.9). The difference was statistically significant (p = 0.029). The mean Oxford Hip Score, Hip disability and Osteoarthritis Outcome Score, and Forgotten Joint Score were 45 (29 to 48), 89 (43 to 100), and 84 (19 to 100), respectively. The mean scores for each of the five domains of the EuroQol five-dimension three-level questionnaire were 1.2, 1.0, 1.2, 1.3, and 1.1, and mean overall score 82.6 (50 to 100). Ultrasound showed no pseudotumour. Mean cobalt and chromium levels were 32.1 nmol/l (1 to 374) and 45.5 nmol/l (9 to 408), respectively. Conclusion: This study shows that BHRs provide excellent survivorship and functional outcomes in young male patients. At 20 years, soft-tissue imaging and serum metal ion studies suggest that a metal-on-metal resurfacing implant can be well tolerated in a group of young patients.

Modular dual-mobility articulations in patients with adverse spinopelvic mobility.

AIMS: Adverse spinal motion or balance (spine mobility) and adverse pelvic mobility, in combination, are often referred to as adverse spinopelvic mobility (SPM). A stiff lumbar spine, large posterior standing pelvic tilt, and severe sagittal spinal deformity have been identified as risk factors for increased hip instability. Adverse SPM can create functional malposition of the acetabular components and hence is an instability risk. Adverse pelvic mobility is often, but not always, associated with abnormal spinal motion parameters. Dislocation rates for dual-mobility articulations (DMAs) have been reported to be between 0% and 1.1%. The aim of this study was to determine the early survivorship from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) of patients with adverse SPM who received a DMA. METHODS: A multicentre study was performed using data from 227 patients undergoing primary total hip arthroplasty (THA), enrolled consecutively. All the patients who had one or more adverse spine or pelvic mobility parameter had a DMA inserted at the time of their surgery. The mean age was 76 years (22 to 93) and 63% were female (n = 145). At a mean of 14 months (5 to 31) postoperatively, the AOANJRR was analyzed for follow-up information. Reasons for revision and types of revision were identified. RESULTS: The AOANJRR reported two revisions: one due to infection, and the second due to femoral component loosening. No revisions for dislocation were reported. One patient died with the prosthesis in situ. Kaplan-Meier survival rate was 99.1% (95% confidence interval 98.3 to 100) at 14 months (number at risk 104). CONCLUSION: In our cohort of patients undergoing primary THA with one or more factor associated with adverse SPM, DM bearings conferred stability at two years' follow-up. Cite this article: Bone Joint J 2022;104-B(7):820-825.

The effect of varus stem placement on joint offset during total hip arthroplasty: a virtual study.

INTRODUCTION AND AIMS: With total hip replacement (THR), varus alignment of an uncemented stem will increase offset which can have significant detrimental effects on muscular balance, leg length and overall satisfaction. Thus, we used 3D planning software to determine the change in joint offset with increasing varus stem placement. METHODS: Eight patients undergoing THR had routine computed tomography (CT) scans to allow for 3D hip planning. Each set of CTs was templated with a straight stem and an uncemented acetabular cup. Initial templating was performed to reproduce native leg length and offset. The templated stem was then rotated into varus at 1° intervals, up to 6° varus while offset changes for all varus positions were noted. This was repeated for each of 3 neck angles, 125°, 135° and 135° lateral and for each stem sizes 1, 3, 5 and 7. RESULTS: Overall, there was a mean 1.5 mm increase in offset for every 1° of varus. The stems with a 125° neck angle had the greatest increase in mean offset at 1.6 mm for every 1° of varus. The stem neck angles of 135° lateral offset and 135° standard offset, had a mean increase in offset of 1.5 mm and 1.4 mm respectively for every 1° of varus. A greater mean increase in offset for every 1° of varus was observed with increasing stem size. CONCLUSIONS: We have quantified the relationship between alignment and offset with every 1° of varus placement increasing hip offset for straight stems by 1.5 mm. This can be used as a guide for surgeons during THR so that they have a better quantitative understanding of how varus placement of the stem affects the hip offset.

Prevention of early complications following total hip replacement.

Total hip arthroplasty (THA) has been quoted as "the operation of the century", owing to its efficacy and the substantial improvements evidenced with respect to functional patient outcomes and quality of life. However, early postoperative complications are often inevitable, hence it is imperative to take every step to prevent them and minimise morbidity and mortality. This manuscript focuses on the most common early complications following THA, namely venous thromboembolism (VTE), prosthetic joint infection, periprosthetic fracture, instability, and leg length inequality. It aims to outline effective risk stratification strategies and prevention measures that could apply to the wider Orthopaedic community.

Spinopelvic mobility affects accuracy of acetabular anteversion measurements on cross-table lateral radiographs.

AIMS: Cross-table lateral (CTL) radiographs are commonly used to measure acetabular component anteversion after total hip arthroplasty (THA). The CTL measurements may differ by > 10° from CT scan measurements but the reasons for this discrepancy are poorly understood. Anteversion measurements from CTL radiographs and CT scans are compared to identify spinopelvic parameters predictive of inaccuracy. METHODS: THA patients (n = 47; 27 males, 20 females; mean age 62.9 years (SD 6.95)) with preoperative spinopelvic mobility, radiological analysis, and postoperative CT scans were retrospectively reviewed. Acetabular component anteversion was measured on postoperative CTL radiographs and CT scans using 3D reconstructions of the pelvis. Two cohorts were identified based on a CTL-CT error of ≥ 10° (n = 11) or < 10° (n = 36). Spinopelvic mobility parameters were compared using independent-samples t-tests. Correlation between error and mobility parameters were assessed with Pearson's coefficient. RESULTS: Patients with CTL error > 10° (10° to 14°) had stiffer lumbar spines with less mean lumbar flexion (38.9°(SD 11.6°) vs 47.4° (SD 13.1°); p = 0.030), different sagittal balance measured by pelvic incidence-lumbar lordosis mismatch (5.9° (SD 18.8°) vs -1.7° (SD 9.8°); p = 0.042), more pelvic extension when seated (pelvic tilt -9.7° (SD 14.1°) vs -2.2° (SD 13.2°); p = 0.050), and greater change in pelvic tilt between supine and seated positions (12.6° (SD 12.1°) vs 4.7° (SD 12.5°); p = 0.036). The CTL measurement error showed a positive correlation with increased CTL anteversion (r = 0.5; p = 0.001), standing lordosis (r = 0.23; p = 0.050), seated lordosis (r = 0.4; p = 0.009), and pelvic tilt change between supine and step-up positions (r = 0.34; p = 0.010). CONCLUSION: Differences in spinopelvic mobility may explain the variability of acetabular anteversion measurements made on CTL radiographs. Patients with stiff spines and increased compensatory pelvic movement have less accurate measurements on CTL radiographs. Flexion of the contralateral hip is required to obtain clear CTL radiographs. In patients with lumbar stiffness, this movement may extend the pelvis and increase anteversion of the acetabulum on CTL views. Reliable analysis of acetabular component anteversion in this patient population may require advanced imaging with a CT scan. Cite this article: Bone Joint J 2021;103-B(7 Supple B):59-65.

Can TKA outcomes be predicted with computational simulation? Generation of a patient specific planning tool.

BACKGROUND: Computer simulations of knee movement allow Total Knee Arthroplasty (TKA) dynamic outcomes to be studied. This study aims to build a model predicting patient reported outcome from a simulation of post-operative TKA joint dynamics. METHODS: Landmark localisation was performed on 239 segmented pre-operative computerized tomography (CT) scans to capture patient specific soft tissue attachments. The pre-operative bones and 3D implant files were registered to post-operative CT scans following TKA. Each post-operative knee was simulated undergoing a deep knee bend with assumed ligament balancing of the extension space. The kinematic results from this simulation were used in a Multivariate Adaptive Regression Spline algorithm, predicting attainment of a Patient Acceptable Symptom State (PASS) score in captured 12 month post-operative Knee Injury and Osteoarthritis Outcome Scores (KOOS). An independent series of 250 patients was evaluated by the predictive model to assess how the predictive model behaved in a pre-operative planning context. RESULTS: The generated predictive algorithm, called the Dynamic Knee Score (DKS) contained features, in order of significance, related to tibio-femoral force, patello-femoral motion and tibio-femoral motion. Area Under the Curve for predicting attainment of the PASS KOOS Score was 0.64. The predictive model produced a bimodal spread of predictions, reflecting a tendency to either strongly prefer one alignment plan over another or be ambivalent. CONCLUSION: A predictive algorithm relating patient reported outcome to the outputs of a computational simulation of a deep knee bend has been derived (the DKS). Simulation outcomes related to tibio-femoral balance had the highest correlation with patient reported outcome.

Variation in femoral anteversion in patients requiring total hip replacement.

BACKGROUND: Optimal implant alignment is important for total hip replacement (THR) longevity. Femoral stem anteversion is influenced by the native femoral anteversion. Knowing a patient's femoral morphology is therefore important when planning optimal THR alignment. We investigated variation in femoral anteversion across a patient population requiring THR. METHODS: Preoperatively, native femoral neck anteversion was measured from 3-dimensional CT reconstructions in 1215 patients. RESULTS: The median femoral anteversion was 14.4° (-27.1-54.5°, IQR 7.4-20.9°). There were significant gender differences (males 12.7°, females 16.0°; p < 0.0001). Femoral anteversion in males decreased significantly with increasing age. 14% of patients had extreme anteversion (<0° or >30°). CONCLUSIONS: This is the largest series investigating native femoral anteversion in a THR population. Patient variation was large and was similar to published findings of a non-THR population. Gender and age-related differences were observed. Native femoral anteversion is patient-specific and should be considered when planning THR.