RESUMEN
Perovskite solar cells (PSCs) comprise a solid perovskite absorber sandwiched between several layers of different charge-selective materials, ensuring unidirectional current flow and high voltage output of the devices1,2. A 'buffer material' between the electron-selective layer and the metal electrode in p-type/intrinsic/n-type (p-i-n) PSCs (also known as inverted PSCs) enables electrons to flow from the electron-selective layer to the electrode3-5. Furthermore, it acts as a barrier inhibiting the inter-diffusion of harmful species into or degradation products out of the perovskite absorber6-8. Thus far, evaporable organic molecules9,10 and atomic-layer-deposited metal oxides11,12 have been successful, but each has specific imperfections. Here we report a chemically stable and multifunctional buffer material, ytterbium oxide (YbOx), for p-i-n PSCs by scalable thermal evaporation deposition. We used this YbOx buffer in the p-i-n PSCs with a narrow-bandgap perovskite absorber, yielding a certified power conversion efficiency of more than 25%. We also demonstrate the broad applicability of YbOx in enabling highly efficient PSCs from various types of perovskite absorber layer, delivering state-of-the-art efficiencies of 20.1% for the wide-bandgap perovskite absorber and 22.1% for the mid-bandgap perovskite absorber, respectively. Moreover, when subjected to ISOS-L-3 accelerated ageing, encapsulated devices with YbOx exhibit markedly enhanced device stability.
RESUMEN
Single-atom catalysts (SACs) featuring M-N-C moieties have garnered significant attention as efficient electrocatalysts for the oxygen reduction reaction (ORR). However, the role of the dynamic M-N configuration of SACs induced by the derived frameworks under applied ORR potentials remains poorly understood. Herein, we conduct a comprehensive investigation using multiple operando techniques to assess the dynamic configurations of Cu SACs under various microstructural interface (MSI) regulations by anchoring atomic Cu on g-C3N4 and zeolitic imidazolate framework (ZIF) substrates. Cu SACs supported on g-C3N4 exhibit symmetric Cu-N configurations characterized by a reversibly adaptive nature under operational conditions, which leads to their excellent ORR catalytic activity. In contrast, the Cu-N configuration in ZIF-derived Cu SACs undergoes irreversible structural changes during the ORR process, in which the elongated Cu-N pair is unstable and breaks during the ORR, acting as a competing reaction against the ORR and resulting in high overpotential requirements. Crucially, operando time-resolved X-ray absorption spectroscopy (TR-XAS) and Raman results unequivocally reveal the reversibly adapting properties of the local Cu-N configuration in atomic Cu-anchored g-C3N4, which have been overlooked in numerous literatures. All findings provide valuable insights into the potential-driven characteristics of atomic electrocatalysts during target reactions and offer a systematic approach to study atomic electrocatalysts and their corresponding catalytic behaviors.
RESUMEN
The introduction of biuret hydrogen-bonding sites onto chiral binaphthalene-based chromophores was investigated as a route to sub-micron-sized, vesicle-like aggregates endowed with chiroptical properties. The synthesis was conducted from the corresponding chiral 4,4'-dibromo-1,1'-bis(2-naphthol) via Suzuki-Miyaura coupling to afford luminescent chromophores whose emission spectrum could be tuned from blue to yellow-green through extension of the conjugation. For all compounds, the spontaneous formation of hollow spheres with a diameter of ca. 200-800 nm was evidenced by scanning electron microscopy, along with strong asymmetry in the circularly polarized absorption spectra. For some compounds, the emission also displayed circular polarization with values of glum = ca. 10-3 which could be increased upon aggregation.
RESUMEN
The benefits of excess PbI2 on perovskite crystal nucleation and growth are countered by the photoinstability of interfacial PbI2 in perovskite solar cells (PSCs). Here we report a simple chemical polishing strategy to rip PbI2 crystals off the perovskite surface to decouple these two opposing effects. The chemical polishing results in a favorable perovskite surface exhibiting enhanced luminescence, prolonged carrier lifetimes, suppressed ion migration, and better energy level alignment. These desired benefits translate into increased photovoltages and fill factors, leading to high-performance mesostructured formamidinium lead iodide-based PSCs with a champion efficiency of 24.50%. As the interfacial ion migration paths and photodegradation triggers, dominated by PbI2 crystals, were eliminated, the hysteresis of the PSCs was suppressed and the device stability under illumination or humidity stress was significantly improved. Moreover, this new surface polishing strategy can be universally applicable to other typical perovskite compositions.
RESUMEN
As the power conversion efficiency (PCE) of organic photovoltaics (OPVs) approaches 19%, increasing research attention is being paid to enhancing the device's long-term stability. In this study, a robust interface engineering of graphene oxide nanosheets (GNS) is expounded on improving the thermal and photostability of non-fullerene bulk-heterojunction (NFA BHJ) OPVs to a practical level. Three distinct GNSs (GNS, N-doped GNS (N-GNS), and N,S-doped GNS (NS-GNS)) synthesized through a pyrolysis method are applied as the ZnO modifier in inverted OPVs. The results reveal that the GNS modification introduces passivation and dipole effects to enable better energy-level alignment and to facilitate charge transfer across the ZnO/BHJ interface. Besides, it optimizes the BHJ morphology of the photoactive layer, and the N,S doping of GNS further enhances the interaction with the photoactive components to enable a more idea BHJ morphology. Consequently, the NS-GNS device delivers enhanced performance from 14.5% (control device) to 16.5%. Moreover, the thermally/chemically stable GNS is shown to stabilize the morphology of the ZnO electron transport layer (ETL) and to endow the BHJ morphology of the photoactive layer grown atop with a more stable thermodynamic property. This largely reduces the microstructure changes and the associated charge recombination in the BHJ layer under constant thermal/light stresses. Finally, the NS-GNS device is demonstrated to exhibit an impressive T80 lifetime (time at which PCE of the device decays to 80% of the initial PCE) of 2712 h under a constant thermal condition at 65 °C in a glovebox and an outstanding photostability with a T80 lifetime of 2000 h under constant AM1.5G 1-sun illumination in an N2 -controlled environment.
RESUMEN
Electrochemical reduction of CO2 to useful chemicals has been actively pursued for closing the carbon cycle and preventing further deterioration of the environment/climate. Since CO2 reduction reaction (CO2RR) at a cathode is always paired with the oxygen evolution reaction (OER) at an anode, the overall efficiency of electrical energy to chemical fuel conversion must consider the large energy barrier and sluggish kinetics of OER, especially in widely used electrolytes, such as the pH-neutral CO2-saturated 0.5 M KHCO3 OER in such electrolytes mostly relies on noble metal (Ir- and Ru-based) electrocatalysts in the anode. Here, we discover that by anodizing a metallic Ni-Fe composite foam under a harsh condition (in a low-concentration 0.1 M KHCO3 solution at 85 °C under a high-current â¼250 mA/cm2), OER on the NiFe foam is accompanied by anodic etching, and the surface layer evolves into a nickel-iron hydroxide carbonate (NiFe-HC) material composed of porous, poorly crystalline flakes of flower-like NiFe layer-double hydroxide (LDH) intercalated with carbonate anions. The resulting NiFe-HC electrode in CO2-saturated 0.5 M KHCO3 exhibited OER activity superior to IrO2, with an overpotential of 450 and 590 mV to reach 10 and 250 mA/cm2, respectively, and high stability for >120 h without decay. We paired NiFe-HC with a CO2RR catalyst of cobalt phthalocyanine/carbon nanotube (CoPc/CNT) in a CO2 electrolyzer, achieving selective cathodic conversion of CO2 to CO with >97% Faradaic efficiency and simultaneous anodic water oxidation to O2 The device showed a low cell voltage of 2.13 V and high electricity-to-chemical fuel efficiency of 59% at a current density of 10 mA/cm2.
RESUMEN
Heterogeneous catalysis based on air-stable lanthanide complexes is relatively rare, especially for electrochemical water oxidation and reduction. Therefore, it is highly desired to investigate the synergy caused by cocatalysts on the lanthanide complex family for heterogeneous catalysis because of their structural diversity, air/moisture insensitivity, and easy preparation under an air atmosphere. Two mononuclear and three dinuclear dysprosium complexes containing a series of Schiff-base ligands have been demonstrated as robust electrocatalysts for triggering heterogeneous water oxidation in alkaline solution, in which the complex [Dy2(hmb)2(OAc)4]·MeCN(3) was revealed to have the best activity toward heterogeneous water oxidation among all five complexes in the present study. The molecular activation of dysprosium complexes has also been investigated with a series of N-containing heterocyclic additives [i.e., 4-(dimethylamino)pyridine (DMAP), bis(triphenylphosphine)iminium chloride ([PPN]Cl), indole, and quinoline]. In particular, the corresponding overpotential was effectively enhanced by 211 mV (at a current density of 10 mA cm-2) with the assistance of DMAP. On the basis of electrochemical and ex situ/in situ spectroscopic investigations, the best catalyst, DMAP-complex 3 on a carbon paper electrode, was confirmed with well-maintained molecular identity during heterogeneous water oxidation free of forming any dysprosium oxide and/or undesired products.
RESUMEN
Tin-based perovskite, which exhibits narrower bandgap and comparable photophysical properties to its lead analogs, is one of the most forward-looking lead-free semiconductor materials. However, the poor oxidative stability of tin perovskite hinders the development toward practical application. In this work, the effect of pseudohalide anions on the stability and emission properties of single-layer 2D tin perovskite nanoplates with chemical formula TEA2 SnI4 (TEA = 2-thiophene-ethylammonium) is reported. The results reveal that ammonium thiocyanate (NH4 SCN) is the most effective additive in enhancing the stability and photoluminescence quantum yield of 2D TEA2 SnI4 (23 ± 3%). X-Ray photoelectron spectroscopic investigations on the thiocyanate passivated TEA2 SnI4 nanoplate show less than a 1% increase of Sn4+ signal upon 30 min exposure to air under ambient conditions (298 K, humidity ≈70%). Furthermore, no noticeable decrease in emission intensity of the nanoplate is observed after 20 h in air. The SCN- passivation during the growth stage of TEA2 SnI4 is proposed to play a crucial role in preventing the oxidation of Sn2+ and hence boosts both stability and photoluminescence yield of tin perovskite nanoplates.
RESUMEN
Gas cluster ion beam (GCIB) is a promising technique for preserving molecular structures during ion sputtering and successfully profiling biological and soft materials. However, although GCIB yields lower damage accumulation compared with C60+ and monoatomic ion beams, the inevitable alteration of the chemical structure can introduce artifacts into the resulting depth profile. To enhance the ionization yield and further mask damage, a low-energy O2+ (200-500 V) cosputter can be applied. While the energy per atom (E/n) of GCIB is known to be an important factor influencing the sputter process, the manner through which E/n affects the GCIB-O2+ cosputter process remains unclear. In this study, poly(ethylene terephthalate) (PET) was used as a model material to investigate the sputter process of 10-20 kV Ar1000-4000+ (E/n = 2.5-20 eV per atom) with and without O2+ cosputter at different energies and currents. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) with Bi32+ as the primary ion was used to examine surfaces sputtered at different fluences. The sputter craters were also measured by alpha-step and atomic force microscopy in quantitative imaging mode. The SIMS results showed that the steady-state cannot be obtained with E/n values of less than 5 eV per atom due to damage accumulation using single GCIB sputtering. With a moderate E/n value of 5-15 eV per atom, the steady-state can be obtained, but the â¼50% decay in intensity indicated that damage cannot be masked completely despite the higher sputter yield. Furthermore, the surface Young's modulus decreased with increasing E/n, suggesting that depolymerization occurred. At an E/n value of 20 eV per atom, a failed profile was obtained with rapidly decreased sputter rate and secondary ion intensity due to the ion-induced crosslink. With O2+ cosputtering and a moderate E/n value, the oxidized species generated by O2+ enhanced the ionization yield, which led to a higher ion intensity at steady-state in general. Because higher kinetic energy or current density of O2+ led to a larger interaction volume and more structural damage that suppressed molecular ion intensity, the enhancement from O2+ was most apparent with low-energy-high-current (200 V, 80 µA cm-2) or high-energy-low-current (500 V, 5 µA cm-2) O2+ cosputtering with 0.5 µA cm-2 GCIBs. In these cases, little or no intensity drop was observed at the steady-state.
RESUMEN
BACKGROUND: Circulating tumor cells (CTCs) comprise the high metastatic potential population of cancer cells in the blood circulation of humans; they have become the established biomarkers for cancer diagnosis, individualized cancer therapy, and cancer development. Technologies for the isolation and recovery of CTCs can be powerful cancer diagnostic tools for liquid biopsies, allowing the identification of malignancies and guiding cancer treatments for precision medicine. METHODS: We have used an electrospinning process to prepare poly(lactic-co-glycolic acid) (PLGA) nanofibrous arrays in random or aligned orientations on glass slips. We then fabricated poly(methyl methacrylate) (PMMA)-based microfluidic chips embedding the PLGA nanofiber arrays and modified their surfaces through sequential coating with using biotin-(PEG)7-amine through EDC/NHS activation, streptavidin (SA), and biotinylated epithelial-cell adhesion-molecule antibody (biotin-anti-EpCAM) to achieve highly efficient CTC capture. When combined with an air foam technology that induced a high shear stress and, thereby, nondestructive release of the captured cells from the PLGA surfaces, the proposed device system operated with a high cell recovery rate. RESULTS: The morphologies and average diameters of the electrospun PLGA nanofibers were characterized using scanning electron microscopy (SEM) and confocal Raman imaging. The surface chemistry of the PLGA nanofibers conjugated with the biotin-(PEG)7-amine was confirmed through time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging. The chip system was studied for the effects of the surface modification density of biotin-(PEG)7-amine, the flow rates, and the diameters of the PLGA nanofibers on the capture efficiency of EpCAM-positive HCT116 cells from the spiked liquid samples. To assess their CTC capture efficiencies in whole blood samples, the aligned and random PLGA nanofiber arrays were tested for their abilities to capture HCT116 cells, providing cancer cell capture efficiencies of 66 and 80%, respectively. With the continuous injection of air foam into the microfluidic devices, the cell release efficiency on the aligned PLGA fibers was 74% (recovery rate: 49%), while it was 90% (recovery rate: 73%) on the random PLGA fibers, from tests of 200 spiked cells in 2 mL of whole blood from healthy individuals. Our study suggests that integrated PMMA microfluidic chips embedding random PLGA nanofiber arrays may be suitable devices for the efficient capture and recovery of CTCs from whole blood samples.
Asunto(s)
Separación Celular/métodos , Nanofibras/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Biotina/química , Línea Celular Tumoral , Humanos , Dispositivos Laboratorio en un Chip , Microfluídica , Polietilenglicoles/químicaRESUMEN
Over the last decade, cluster ion beams have displayed their capability to analyze organic materials and biological specimens. Compared with atomic ion beams, cluster ion beams non-linearly enhance the sputter yield, suppress damage accumulation and generate high mass fragments during sputtering. These properties allow successful Secondary Ion Mass Spectroscopy (SIMS) analysis of soft materials beyond the static limit. Because the intensity of high mass molecular ions is intrinsically low, enhancing the intensity of these secondary ions while preserving the sample in its original state is the key to highly sensitive molecular depth profiles. In this work, bulk poly(ethylene terephthalate) (PET) was used as a model material and analyzed using Time-of-Flight SIMS (ToF-SIMS) with a pulsed Bi3(2+) primary ion. The optimized hardware of a 10 kV Ar2500(+) Gas Cluster Ion Beam (GCIB) with a low kinetic energy (200-500 V) oxygen ion (O2(+)) as a cosputter beam was employed for generating depth profiles and for examining the effect of beam parameters. The results were then quantitatively analyzed using an established erosion model. It was found that the ion intensity of the PET monomer ([M + H](+)) and its large molecular fragment ([M - C2H4O + H](+)) steadily declined during single GCIB sputtering, with distortion of the distribution information. However, under an optimized GCIB-O2(+) cosputter, the secondary ion intensity quickly reached a steady state and retained >95% intensity with respect to the pristine surface, although the damage cross-section was larger than that of single GCIB sputtering. This improvement was due to the oxidation of molecules and the formation of -OH groups that serve as proton donors to particles emitted from the surface. As a result, the ionization yield was enhanced and damage to the chemical structure was masked. Although O2(+) is known to alter the chemical structure and cause damage accumulation, the concurrently used GCIB could sufficiently remove the surface layer and allow the damage to be masked by the enhanced ionization yield when the ion-solid interaction volume was kept shallow with a low O2(+) energy. This low O2(+) energy (200 V) cosputtering also produced a smoother surface than a single GCIB. Because the oxidized species were produced by O2(+) and removed by GCIB simultaneously, a sufficiently high O2(+) current density was required to produce adequate enhancements. Therefore, it was found that 10 kV with 2 × 10(-6) A per cm(2) Ar2500(+) and 200 V with 3.2 × 10(-4) A per cm(2) O2(+) produced the best profile.
RESUMEN
NiO is an attractive hole-transporting material for polymer solar cells (PSCs) owing to its excellent stability and electrical/optical properties. This study demonstrates, for the first time, fabrication of uniform, defect-free, and conformal NiO ultra-thin films for use as hole-transporting layers (HTLs) in PSCs by atomic layer deposition (ALD) through optimization of the ALD processing parameters. The morphological, optical, and electrical properties of ALD NiO films were determined to be favorable for their HTL application. As a result, PSCs containing an ALD NiO HTL with an optimized thickness of 4 nm achieved a power conversion efficiency (PCE) of 3.4%, which was comparable to that of a control device with a poly(3,4-ethylenedioxy-thiophene):poly(styrene-sulfonate) HTL. The high quality and manufacturing scalability of ALD NiO films demonstrated here will facilitate the adoption of NiO HTLs in PSCs.
RESUMEN
The use of synthetic biomaterials as implantable devices typically is accompanied by considerable nonspecific adsorption of proteins, cells, and bacteria. These may eventually induce adverse pathogenic problems in clinical practice, such as thrombosis and biomaterial-associated infection. Thus, an effective surface coating for medical devices has been pursued to repel nonspecific adsorption from surfaces. In this study, we employ an adhesive dopamine molecule conjugated with zwitterionic sulfobetaine moiety (SB-DA), developed based on natural mussels, as a surface ligand for the modification of TiO2. The electrochemical study shows that the SB-DA exhibits fully reversible reduction-oxidation behavior at pH 3, but it is irreversible at pH 8. A contact angle goniometer and X-ray photoelectron spectroscopy were utilized to explore the surface hydration, chemical states, and bonding mechanism of SB-DA. The results indicate that the binding between hydroxyl groups of SB-DA and TiO2 converts from hydrogen bonds to bidentate binding upon the pH transition from pH 3 to 8. In order to examine the antifouling properties of SB-DA thin films, the modified substrates were brought into contact with bovine serum albumin and bacteria solutions. The fouling levels were monitored using a quartz crystal microbalance with dissipation sensor and fluorescence optical microscope. Tests showed that the sample prepared via the pH transition approach provides the best resistance to nonspecific adsorption due to the high coverage and stability of the SB-DA films. These findings support the mechanism of the pH-modulated assembly of SB-DA molecules, and for the first time we demonstrate the antifouling properties of the SB-DA to be comparable with traditional thiol-based zwitterionic self-assemblies. The success of modification with SB-DA opens an avenue for developing a biologically inspired surface chemistry and can have applications over a wide spectrum of bioapplications. The strategy of the pH transition can also be applied to other functional dopamine derivatives.
Asunto(s)
Adhesión Bacteriana , Betaína/análogos & derivados , Materiales Biocompatibles Revestidos/química , Dopamina/química , Pseudomonas aeruginosa/metabolismo , Staphylococcus epidermidis/metabolismo , Adsorción , Animales , Betaína/química , Bovinos , Concentración de Iones de Hidrógeno , Pseudomonas aeruginosa/citología , Albúmina Sérica Bovina/química , Staphylococcus epidermidis/citología , Propiedades de Superficie , TitanioRESUMEN
Extracellular matrix (ECM) proteins, such as fibronectin, laminin, and collagen IV, play important roles in many cellular behaviors, including cell adhesion and spreading. Understanding their adsorption behavior on surfaces with different natures is helpful for studying the cellular responses to environments. By tailoring the chemical composition in binary acidic (anionic) and basic (cationic) functionalized self-assembled monolayer (SAM)-modified gold substrates, variable surface potentials can be generated. To examine how surface potential affects the interaction between ECM proteins and substrates, a quartz crystal microbalance with dissipation detection (QCM-D) was used. To study the interaction under physiological conditions, the ionic strength and pH were controlled using phosphate-buffered saline at 37 °C, and the ζ potentials of the SAM-modified Au and protein were determined using an electrokinetic analyzer and phase analysis light scattering, respectively. During adsorption processes, the shifts in resonant frequency (f) and energy dissipation (D) were acquired simultaneously, and the weight change was calculated using the Kelvin-Voigt model. The results reveal that slightly charged protein can be adsorbed on a highly charged SAM, even where both surfaces are negatively charged. This behavior is attributed to the highly charged SAM, which polarizes the protein microscopically, and the Debye interaction, as well as other short-range interactions such as steric force, hydrogen bonding, direct bonding, charged domains within the protein structure, etc., that allow adsorption, although the macroscopic electrostatic interaction discourages adsorption. For surfaces with a moderate potential, proteins are not significantly polarized by the surface, and the interaction can be predicted through simple electrostatic attraction. Furthermore, surface-induced self-assembly of protein molecules also affects the adsorbed structures and kinetics. The adsorbed layer properties, such as rigidity and packing behaviors, were further investigated using the D-f plot and phase detection microscopy (PDM) imaging.
Asunto(s)
Proteínas de la Matriz Extracelular/química , Adsorción , Propiedades de SuperficieRESUMEN
We argue that the structure ordering of self-assembled probing molecular monolayers is essential for the reliability and sensitivity of nanowire-based field-effect sensors because it can promote the efficiency for molecular interactions as well as strengthen the molecular dipole field experienced by the nanowires. In the case of monolayers, we showed that structure ordering could be improved by means of electrical field alignment. This technique was then employed to align multilayer complexes for nanowire sensing applications. The sensitivity we achieved for detection of hybridization between 15-base single-strand DNA molecules is 0.1 fM and for alcohol sensors is 0.5 ppm. The reliability was confirmed by repeated tests on chips that contain multiple nanowire sensors.
Asunto(s)
Campos Electromagnéticos , Nanocables , Propiedades de SuperficieRESUMEN
High-quality perovskite films are essential for achieving high performance of optoelectronic devices; However, solution-processed perovskite films are known to suffer from compositional and structural inhomogeneity due to lack of systematic control over the kinetics during the formation. Here, the microscopic homogeneity of perovskite films is successfully enhanced by modulating the conversion reaction kinetics using a catalyst-like system generated by a foaming agent. The chemical and structural evolution during this catalytic conversion is revealed by a multimodal synchrotron toolkit with spatial resolutions spanning many length scales. Combining these insights with computational investigations, a cyclic conversion pathway model is developed that yields exceptional perovskite homogeneity due to enhanced conversion, having a power conversion efficiency of 24.51% for photovoltaic devices. This work establishes a systematic link between processing of precursor and homogeneity of the perovskite films.
RESUMEN
In the past decade, the C60-based ion gun has been widely utilized in the secondary ion mass spectrometry (SIMS) analysis of organic and biological materials because molecular secondary-ions of high masses could be generated by cluster-ion bombardment. This technique furthers the development of SIMS in bioanalysis by eliminating the need for either heteroatom or isotope labeling. However, the intensity of high-mass parent ions was usually low and limited the sensitivity of the analysis, thus requiring an enhancement in the intensity of these molecular ions to widen the application of SIMS. In this work, the aim was to preserve samples in their original state while using a low kinetic energy O2(+) beam cosputtered with high-energy C60(+) to enhance the ion intensity through the depth-profile. Although O2(+) is generally used to enhance ion intensities in positive SIMS, it is known to alter the chemical structure and primarily provide elemental information; hence, it is not suitable for profiling organic and biological specimens. Nevertheless, owing to its high sputtering yield, cluster C60(+) ion removes and masks the structural damage, hence O2(+) may be used to enhance the ion intensity. The characteristic molecular ions of polyethylene terephthalate (PET), trehalose, and a peptide (papain inhibitor) are enhanced by 35×, 12×, and 3.5× with the use of the auxiliary O2(+) beam, respectively. This significant enhancement in ionization yield is attributed to the oxidation of molecules and formation of a hydroxyl group that serves as a proton donator. In addition to enhancing molecular SIMS signals, C60(+)-O2(+) cosputtering could also alleviate several problems, including sputtering rate decay, carbon deposition, and surface roughening, that are associated with C60(+) bombardment and produced better depth profiles.
RESUMEN
Atomic layer engineering is investigated to tailor the morphotropic phase boundary (MPB) between antiferroelectric, ferroelectric, and paraelectric phases. By increasing the HfO2 seeding layer with only 2 monolayers, the overlying ZrO2 layer experiences the dramatic phase transition across the MPB. Conspicuous ferroelectric properties including record-high remanent polarization (2Pr ≈ 60 µC cm-2 ), wake-up-free operation, and high compatibility with advanced semiconductor technology nodes, are achieved in the sub-6 nm thin film. The prominent antiferroelectric to ferroelectric phase transformation is ascribed to the in-plane tensile stress introduced into ZrO2 by the HfO2 seeding layer. Based on the high-resolution and high-contrast images of surface grains extracted precisely by helium ion microscopy, the evolution of the MPB between tetragonal, orthorhombic, and monoclinic phases with grain size is demonstrated for the first time. The result indicates that a decrease in the average grain size drives the crystallization from the tetragonal to polar orthorhombic phases.
RESUMEN
Contact doping is considered crucial for reducing the contact resistance of two-dimensional (2D) transistors. However, a process for achieving robust contact doping for 2D electronics is lacking. Here, we developed a two-step doping method for effectively doping 2D materials through a defect-repairing process. The method achieves strong and hysteresis-free doping and is suitable for use with the most widely used transition-metal dichalcogenides. Through our method, we achieved a record-high sheet conductance (0.16 mS·sq-1 without gating) of monolayer MoS2 and a high mobility and carrier concentration (4.1 × 1013 cm-2). We employed our robust method for the successful contact doping of a monolayer MoS2 Au-contact device, obtaining a contact resistance as low as 1.2 kΩ·µm. Our method represents an effective means of fabricating high-performance 2D transistors.
RESUMEN
Neuromorphic electronics, being inspired by how the brain works, hold great promise to the successful implementation of smart artificial systems. Among several neuromorphic hardware issues, a robust device functionality under extreme temperature is of particular importance for practical applications. Given that the organic memristors for artificial synapse applications are demonstrated under room temperature, achieving a robust device performance at extremely low or high temperature is still utterly challenging. In this work, the temperature issue is addressed by tuning the functionality of the solution-based organic polymeric memristor. The optimized memristor demonstrates a reliable performance under both the cryogenic and high-temperature environments. The unencapsulated organic polymeric memristor shows a robust memristive response under test temperature ranging from 77 to 573 K. Utilizing X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary-ion mass spectrometry (ToF-SIMS) depth profiling, the device working mechanism is unveiled by comparing the compositional profiles of the fresh and written organic polymeric memristors. A reversible ion migration induced by an applied voltage contributes to the characteristic switching behavior of the memristor. Herein, both the robust memristive response achieved at extreme temperatures and the verified device working mechanism will remarkably accelerate the development of memristors in neuromorphic systems.