RESUMEN
Achieving a balance between H-atom adsorption and binding with H2 desorption is crucial for catalyzing hydrogen evolution reaction (HER). In this study, the feasibility of designing and implementing built-in opposite electric fields (OEF) is demonstrated to enable optimal H atom adsorption and H2 desorption using the Ni3(BO3)2/Ni5P4 heterostructure as an example. Through density functional theory calculations of planar averaged potentials, it shows that opposite combinations of inward and outward electric fields can be achieved at the interface of Ni3(BO3)2/Ni5P4, leading to the optimization of the H adsorption free energy (ΔGH*) near electric neutrality (0.05 eV). Based on this OEF concept, the study experimentally validated the Ni3(BO3)2/Ni5P4 system electrochemically forming Ni3(BO3)2 through cyclic voltammetry scanning of B-doped Ni5P4. The surface of Ni3(BO3)2 undergoes reconstruction, as characterized by Grazing Incidence Wide-Angle X-ray Scattering (GIWAXS) and in situ Raman spectroscopy. The resulting catalyst exhibits excellent HER activity in alkaline media, with a low overpotential of 33 mV at 10 mA cm-2 and stability maintained for over 360 h. Therefore, the design strategy of build-in opposite electric field enables the development of high-performance HER catalysts and presents a promising approach for electrocatalyst advancement.
RESUMEN
INTRODUCTION: During atrial fibrillation ablation (AFA), achievement of first pass isolation (FPI) reflects effective lesion formation and predicts long-term freedom from arrhythmia recurrence. We aim to determine the clinical and procedural predictors of pulmonary vein FPI. METHODS: We reviewed AFA procedures in a multicenter prospective registry of AFA (REAL-AF). A multivariate ordinal logistic regression, weighted by inverse proceduralist volume, was used to determine predictors of FPI. RESULTS: A total of 2671 patients were included with 1806 achieving FPI in both vein sides, 702 achieving FPI in one, and 163 having no FPI. Individually, age, left atrial (LA) scar, higher power usage (50 W), greater posterior contact force, ablation index >350 posteriorly, Vizigo™ sheath utilization, nonstandard ventilation, and high operator volume (>6 monthly cases) were all related to improved odds of FPI. Conversely sleep apnea, elevated body mass index (BMI), diabetes mellitus, LA enlargement, antiarrhythmic drug use, and center's higher fluoroscopy use were related to reduced odds of FPI. Multivariate analysis showed that BMI > 30 (OR 0.78 [0.64-0.96]) and LA volume (OR per mL increase = 1.00 [0.99-1.00]) predicted lower odds of achieving FPI, whereas significant left atrial scarring (>20%) was related to higher rates of FPI. Procedurally, the use of high power (50 W) (OR 1.32 [1.05-1.65]), increasing force posteriorly (OR 2.03 [1.19-3.46]), and nonstandard ventilation (OR 1.26 [1.00-1.59]) predicted higher FPI rates. At a site level, high procedural volume (OR 1.89 [1.48-2.41]) and low fluoroscopy centers (OR 0.72 [0.61-0.84]) had higher rates of FPI. CONCLUSION: FPI rates are affected by operator experience, patient comorbidities, and procedural strategies. These factors may be postulated to impact acute lesion formation.
Asunto(s)
Fibrilación Atrial , Ablación por Catéter , Venas Pulmonares , Humanos , Venas Pulmonares/cirugía , Resultado del Tratamiento , Estudios Prospectivos , Fibrilación Atrial/diagnóstico , Fibrilación Atrial/cirugía , Atrios Cardíacos , Cicatriz , Ablación por Catéter/efectos adversos , Ablación por Catéter/métodos , Recurrencia , Estudios Multicéntricos como AsuntoRESUMEN
Metallene materials can provide a large number of active catalytic sites for the efficient use of noble metals as catalysts for hydrogen evolution reaction (HER), whereas the intrinsic activity on the surface is insufficient in crystal phase. The amorphous phase with an inherent long-range disorder can offer a rich coordinate environment and charge polarization on the surface is proposed for promoting the intrinsic catalytic activity on the surface of noble metals. Herein, we designed an amorphous RuPd (am-RuPd) structure by the first principles molecular dynamics method. The performance of the acidic HER on am-RuPd can have a huge enhancement due to the free energy change of hydrogen adsorption close to zero. In alkaline conditions, the H2O dissociation energy barrier on am-RuPd is just 0.49 eV, and it is predicted that the alkaline HER performance of am-RuPd will largely exceed that of Pt nanocrystalline sheets. This work provides a strategy for enhancing the intrinsic catalytic activity on the surface and a way to design an efficient HER catalyst based on metallene materials used in both acidic and alkaline conditions.
RESUMEN
Two-dimensional ferromagnets with high spin-polarization at ambient temperature are of considerable interest because they might be useful for making nanoscale spintronic devices. We report that even though bulk phases of MnO2 are generally antiferromagnetic with low ordering temperatures, the corresponding MnO2 and MnS2 monolayers are ferromagnetic, and MnS2 is a high temperature half metallic ferromagnet. Based on first-principles calculations, we find that the MnO2 monolayer is an intrinsic ferromagnetic semiconductor with a Curie temperature TC of â¼300 K, while the half-metallic MnS2 monolayer has a remarkably high TC of â¼1150 K. Both compounds have substantial magnetocrystalline anisotropy, out of plane in the case of MnO2 monolayers, and in plane along the b-axis of orthorhombic MnS2 monolayer. Interestingly, a metal-insulator phase transition occurs in the MnS2 monolayer when the applied biaxial strain is beyond -2%. Tuning near this metal-insulator transition offers additional possibilities for devices. The present work shows that MnX2 (X = O, S) monolayers have the properties required for ultrathin nano-spintronic devices.
RESUMEN
Hydride metallenes show great potential for hydrogen-related catalytic applications due to favorable electronic structures modulated by interstitial hydrogen atoms and large active surface areas of metallenes. Metallene nanostructures generally have compressive strain relative to bulk, which can affect both the stability and the catalytic behavior of hydride metallenes but in general cannot be controlled. Here, we demonstrate highly stable PdHx metallenes with a tensile strained Ru surface layer and reveal the spatial confinement effect of the Ru skin by multiple spectroscopic characterizations and molecular dynamics simulations. These PdHx@Ru metallenes with a 4.5% expanded Ru outer layer exhibit outstanding alkaline hydrogen evolution reaction activity with a low overpotential of 30 mV at 10 mA cm-2 and robust stability with negligible activity decay after 10,000 cycles, which are superior to commercial Pt/C and most reported Ru-based electrocatalysts. Control experiments and first-principles calculations reveal that the tensile strained Ru outer layer lowers the energy barrier of H2O dissociation and provides a moderate hydrogen adsorption energy.
RESUMEN
Intersectionality is a useful tool to address health inequalities, by helping us understand and respond to the individual and group effects of converging systems of power. Intersectionality rejects the notion of inequalities being the result of single, distinct factors, and instead focuses on the relationships between overlapping processes that create inequities. In this Series paper, we use an intersectional approach to highlight the intersections of racism, xenophobia, and discrimination with other systems of oppression, how this affects health, and what can be done about it. We present five case studies from different global locations that outline different dimensions of discrimination based on caste, ethnicity and migration status, Indigeneity, religion, and skin colour. Although experiences are diverse, the case studies show commonalities in how discrimination operates to affect health and wellbeing: how historical factors and coloniality shape contemporary experiences of race and racism; how racism leads to separation and hierarchies across shifting lines of identity and privilege; how racism and discrimination are institutionalised at a systems level and are embedded in laws, regulations, practices, and health systems; how discrimination, minoritisation, and exclusion are racialised processes, influenced by visible factors and tacit knowledge; and how racism is a form of structural violence. These insights allow us to begin to articulate starting points for justice-based action that addresses root causes, engages beyond the health sector, and encourages transnational solidarity.
Asunto(s)
Racismo , Humanos , Etnicidad , Clase Social , Justicia Social , ViolenciaRESUMEN
We demonstrate the use of functional-unit-based material design for thermoelectrics. This is an efficient approach for identifying high-performance thermoelectric materials, based on the use of combinations of functional fragments relevant to desired properties. Here, we reveal that linear triatomic resonant bonds (LTRBs) found in some Zintl compounds provide strong anisotropy both structurally and electronically, along with strong anharmonic phonon scattering. An LTRB is thus introduced as a functional unit, and compounds are then screened as potential thermoelectric materials. We identify 17 semiconducting candidates from the MatHub-3d database that contain LTRBs. Detailed transport calculations demonstrate that the LTRB-containing compounds not only have considerably lower lattice thermal conductivities than other compounds with similar average atomic masses, but also exhibit remarkable band anisotropy near the valence band maximums due to the LTRB. K5CuSb2 is adopted as an example to elucidate the fundamental correlation between the LTRB and thermoelectric properties. The [Sb-Cu-Sb]5- resonant structures demonstrate the delocalized Sb-Sb interaction within each LTRB, resulting in the softening of TA phonons and leading to large anharmonicity. The low lattice thermal conductivity (0.39 W/m·K at 300 K) combined with the band anisotropy results in a high thermoelectric figure of merit (ZT) for K5CuSb2 of 1.3 at 800 K. This work is a case study of the functional-unit-based material design for the development of novel thermoelectric materials.
RESUMEN
INTRODUCTION: Single-center observational studies have shown promising results with fragmented electrogram (FE)-guided ganglionated plexus (GP) ablation in patients with vagally mediated bradyarrhythmia (VMB). We aimed to compare the acute procedural characteristics during FE-guided GP ablation in patients with VMB performed by first-time operators and those of a single high-volume operator. METHODS AND RESULTS: This international multicenter cohort study included data collected over 2 years from 16 cardiac hospitals. The primary operators were classified according to their prior GP ablation experience: a single high-volume operator who had performed > 50 GP ablation procedures (Group 1), and operators performing their first GP ablation cases (Group 2). Acute procedural characteristics and syncope recurrence were compared between groups. Forty-seven consecutive patients with VMB who underwent FE-guided GP ablation were enrolled, n = 31 in Group 1 and n = 16 in Group 2. The mean number of ablation points in each GP was comparable between groups. The ratio of positive vagal response during ablation on the left superior GP was higher in Group 1 (90.3% vs. 62.5%, p = .022). Ablation of the right superior GP increased heart rate acutely without any vagal response in 45 (95.7%) cases. The procedure time was longer in group 2 (83.4 ± 21 vs. 118.0 ± 21 min, respectively, p < .001). Over a mean follow-up duration of 8.0 ± 3 months (range 2-24 months), none of the patients suffered from syncope. CONCLUSION: This multi-center pilot study shows for the first time the feasibility of FE-guided GP ablation across a large group of procedure-naïve operators.
Asunto(s)
Fibrilación Atrial , Ablación por Catéter , Fibrilación Atrial/cirugía , Bradicardia/cirugía , Ablación por Catéter/efectos adversos , Ablación por Catéter/métodos , Estudios de Cohortes , Humanos , Proyectos Piloto , Resultado del Tratamiento , Nervio Vago/cirugíaRESUMEN
Diamond is a wide-bandgap semiconductor possessing exceptional physical and chemical properties with the potential to miniaturize high-power electronics. Whereas boron-doped diamond (BDD) is a well-known p-type semiconductor, fabrication of practical diamond-based electronic devices awaits development of an effective n-type dopant with satisfactory electrical properties. Here we report the synthesis of n-type diamond, containing boron (B) and oxygen (O) complex defects. We obtain high carrier concentration (â¼0.778 × 1021 cm-3) several orders of magnitude greater than previously obtained with sulfur or phosphorous, accompanied by high electrical conductivity. In high-pressure high-temperature (HPHT) boron-doped diamond single crystal we formed a boron-rich layer â¼1-1.5 µm thick in the {111} surface containing up to 1.4 atomic % B. We show that under certain HPHT conditions the boron dopants combine with oxygen defects to form B-O complexes that can be tuned by controlling the experimental parameters for diamond crystallization, thus giving rise to n-type conduction. First-principles calculations indicate that B3O and B4O complexes with low formation energies exhibit shallow donor levels, elucidating the mechanism of the n-type semiconducting behavior.
RESUMEN
Accelerating slow water dissociation kinetics is key to boosting the hydrogen evolution reaction (HER) in alkaline media. We report the synthesis of atomically dispersed MoOx species anchored on Rh metallene using a one-pot solvothermal method. The resulting structures expose the oxide-metal interfaces to the maximum extent. This leads to a MoOx -Rh catalyst with ultrahigh alkaline HER activity. We obtained a mass activity of 2.32â A mgRh -1 at an overpotential of 50â mV, which is 11.8â times higher than that of commercial Pt/C and surpasses the previously reported Rh-based electrocatalysts. First-principles calculations demonstrate that the interface between MoOx and Rh is the active center for alkaline HER. The MoOx sites preferentially adsorb and dissociate water molecules, and adjacent Rh sites adsorb the generated atomic hydrogen for efficient H2 evolution. Our findings illustrate the potential of atomic interface engineering strategies in electrocatalysis.
RESUMEN
Recent advances in copper chalcogenide-based nanocrystals (NCs), copper sulfide, and copper selenide derived nanostructures, have drawn considerable attention. However, reports of crystal phase and shape engineering of binary or ternary copper telluride NCs remain rare. Here, a colloidal hot-injection approach for producing binary copper/tin telluride, and ternary copper tin telluride NCs with controllable compositions, crystal structures, and morphologies is reported. The crystal phase and growth behavior of these tellurides are systematically studied from both experimental and theoretical perspectives. The morphology of Cu1.29 Te NCs is modified from 1D nanorods with different aspect ratios to 2D nanosheets and 3D nanocubes, by controlling the preferential growth of specific crystalline facets. A controllable phase transition from Cu1.29 Te to Cu1.43 Te NCs is also demonstrated. The latter can be further converted into Cu2 SnTe3 and SnTe through Sn incorporation. Temperature dependent thermoelectric properties of metal (Cu and Sn) telluride nanostructure thin films are also studied, including Cu1.29 Te, Cu1.43 Te, Cu2 SnTe3 , and SnTe. Cu2 SnTe3 is a low carrier density semimetal with compensating electron and hole Fermi surface pockets. The engineering of crystal phase and morphology control of colloidal copper tin telluride NCs opens a path to explore and design new classes of copper telluride-based nanomaterials for thermoelectrics and other applications.
RESUMEN
Germanium telluride (GeTe)-based materials, which display intriguing functionalities, have been intensively studied from both fundamental and technological perspectives. As a thermoelectric material, though, the phase transition in GeTe from a rhombohedral structure to a cubic structure at â¼700 K is a major obstacle impeding applications for energy harvesting. In this work, we discovered that the phase-transition temperature can be suppressed to below 300 K by a simple Bi and Mn codoping, resulting in the high performance of cubic GeTe from 300 to 773 K. Bi doping on the Ge site was found to reduce the hole concentration and thus to enhance the thermoelectric properties. Mn alloying on the Ge site simultaneously increased the hole effective mass and the Seebeck coefficient through modification of the valence bands. With the Bi and Mn codoping, the lattice thermal conductivity was also largely reduced due to the strong point-defect scattering for phonons, resulting in a peak thermoelectric figure of merit (ZT) of â¼1.5 at 773 K and an average ZT of â¼1.1 from 300 to 773 K in cubic Ge0.81Mn0.15Bi0.04Te. Our results open the door for further studies of this exciting material for thermoelectric and other applications.
RESUMEN
The design of catalysts with high activity and robust stability for alkaline hydrogen evolution reaction (HER) remains a great challenge. Here, we report an efficient catalyst of two-dimensional bimetallene hydrides, in which H atoms stabilize the rhodium palladium bimetallene. The system exists because of the introduction of H that is in situ chemically released from the formaldehyde solution during the synthesis. This provides a highly stable catalyst based on an unstable combination of metal elements. Density functional theory calculations show the H is confined by electronic interactions and the Miedema rule of reverse stability of the RhPd alloy. The obtained catalyst exhibits outstanding alkaline HER catalytic performance with a low overpotential of 40 mV at 10 mA cm-2 and remarkable stability for over 10 h at 100 mA cm-2. The experimental results show that the confined H improve the activity, while the ultrathin sheet-like morphology yields stability. Our work provides guidance for synthesizing high-activity catalysts by confining heteroatoms into the crystal lattice of bimetallene and also a very novel mechanism for the growth of bimetallene made of highly immiscible components.
RESUMEN
Black phosphorus (BP) has attracted great attention for applications in thermoelectric devices, owing to its unique in-plane anisotropic electrical and thermal properties. However, its limited conversion efficiency hinders practical application. Here, the thermoelectric properties of 1D BP nanotubes (BPNTs) with different tube chirality are investigated using first-principles calculations and Boltzmann transport theory. The results reveal that variation of crystallographic orientation has a distinct impact on band dispersions, which provides a wide tunability of electronic transport. It is shown that (1,1)-oriented BPNT structure can yield an order-of-magnitude enhanced thermoelectric figure of merit ZT at room temperature (as high as 1.0), compared with the bulk counterpart. The distinct enhancement is attributed to the favorable multiple band structures that lead to high carrier mobility of 2430 cm2 V-1 s-1 . Further performance improvement can be realized by suitable doping, such as N-alloying, reaching an increase of room-temperature ZT by a factor of 3 over that of pristine BPNT. The work provides an applicable method to achieve band engineering design, and presents a new strategy of designing 1D BPNT that are promising candidates for flexible, eco-friendly, and high-performance thermoelectrics.
RESUMEN
Elucidating the orbital level origin of second harmonic generation (SHG) in materials and identifying the local contributions is a long-standing challenge. We report a first principles approach for the SHG where the contributions from individual orbitals or atoms can be evaluated via symmetry adapted Wannier functions without semiempirical parameters. We apply this method to the common SHG materials KBe_{2}BO_{3}F_{2}, KCaCO_{3}F, and ß-BaB_{2}O_{4}, and show that the orbitals on noncentrosymmetric sublattices are responsible for SHG effect and the energies of these orbitals control the magnitude.
RESUMEN
BACKGROUND: Predicting the details of how an epidemic evolves is highly valuable as health institutions need to better plan towards limiting the infection propagation effects and optimizing their prediction and response capabilities. Simulation is a cost- and time-effective way of predicting the evolution of the infection as the joint influence of many different factors: interaction patterns, personal characteristics, travel patterns, meteorological conditions, previous vaccination, etc. The work presented in this paper extends EpiGraph, our influenza epidemic simulator, by introducing a meteorological model as a modular component that interacts with the rest of EpiGraph's modules to refine our previous simulation results. Our goal is to estimate the effects of changes in temperature and relative humidity on the patterns of epidemic influenza based on data provided by the Spanish Influenza Sentinel Surveillance System (SISSS) and the Spanish Meteorological Agency (AEMET). METHODS: Our meteorological model is based on the regression model developed by AB and JS, and it is tuned with influenza surveillance data obtained from SISSS. After pre-processing this data to clean it and reconstruct missing samples, we obtain new values for the reproduction number of each urban region in Spain, every 10 minutes during 2011. We simulate the propagation of the influenza by setting the date of the epidemic onset and the initial influenza-illness rates for each urban region. RESULTS: We show that the simulation results have the same propagation shape as the weekly influenza rates as recorded by SISSS. We perform experiments for a realistic scenario based on actual meteorological data from 2010-2011, and for synthetic values assumed under simplified predicted climate change conditions. Results show that a diminishing relative humidity of 10% produces an increment of about 1.6% in the final infection rate. The effect of temperature changes on the infection spread is also noticeable, with a decrease of 1.1% per extra degree. CONCLUSIONS: Using a tool like ours could help predict the shape of developing epidemics and its peaks, and would permit to quickly run scenarios to determine the evolution of the epidemic under different conditions. We make EpiGraph source code and epidemic data publicly available.
Asunto(s)
Gripe Humana/epidemiología , Tiempo (Meteorología) , Adolescente , Adulto , Anciano , Epidemias , Humanos , Humedad , Persona de Mediana Edad , Modelos Teóricos , Vigilancia de Guardia , España/epidemiología , Temperatura , Población Urbana/estadística & datos numéricos , Vacunación , Adulto JovenRESUMEN
Correction for 'Localization in the SCAN meta-generalized gradient approximation functional leading to broken symmetry ground states for graphene and benzene' by Yubo Zhang et al., Phys. Chem. Chem. Phys., 2020, 22, 19585-19591, DOI: 10.1039/D0CP03567J.
RESUMEN
Density functional theory calculations play a central role in understanding chemical and solid-state systems. Progress depends on density functionals that accurately reproduce both energies, for thermochemistry, and properly describe ground states and other properties that are of interest. The Cr dimer, benzene and graphene are particularly important benchmark systems for quantum chemistry and condensed matter physics. The Strongly Constrained and Appropriately Normed (SCAN) functional, which is an advanced meta-generalized gradient approximation functional that significantly improves molecular energies is shown to perform poorly for the Cr dimer. This is connected with its poor performance for itinerant solid-state magnets and is a consequence of over localization of electrons, thus illustrating an analogy between the Cr dimer and itinerant magnets. The Cr dimer is a notoriously difficult system for density functionals. However, we additionally find that SCAN predicts an incorrect symmetry broken ground state for 2D graphene and for the benzene molecule, which is surprising considering that ground states of these are known to be well described even by the simplest local density approximation. We show that SCAN overly favors localized spin polarized states, which is a serious deficiency of this approach. Thus, the challenge of finding density functionals that accurately treat both localized and delocalized electronic systems remains.
RESUMEN
Variant accessory pathways include atriofascicular, nodofascicular, nodoventricular, atrio-Hisian, and fasciculoventricular pathways. Atriofascicular pathways are the most common with others occurring rarely. The anatomical descriptions, electrocardiographic findings, electrophysiologic findings, and clincial manifestations are discussed.
Asunto(s)
Trastorno del Sistema de Conducción Cardíaco/fisiopatología , Sistema de Conducción Cardíaco/anatomía & histología , Sistema de Conducción Cardíaco/fisiopatología , Variación Anatómica , Electrofisiología Cardíaca , Electrocardiografía , HumanosRESUMEN
Achieving higher carrier mobility plays a pivotal role for obtaining potentially high thermoelectric performance. In principle, the carrier mobility is governed by the band structure as well as by the carrier scattering mechanism. Here, we demonstrate that by manipulating the carrier scattering mechanism in n-type Mg3Sb2-based materials, a substantial improvement in carrier mobility, and hence the power factor, can be achieved. In this work, Fe, Co, Hf, and Ta are doped on the Mg site of Mg3.2Sb1.5Bi0.49Te0.01, where the ionized impurity scattering crosses over to mixed ionized impurity and acoustic phonon scattering. A significant improvement in Hall mobility from â¼16 to â¼81 cm2â V-1â s-1 is obtained, thus leading to a notably enhanced power factor of â¼13 µWâ cm-1â K-2 from â¼5 µWâ cm-1â K-2 A simultaneous reduction in thermal conductivity is also achieved. Collectively, a figure of merit (ZT) of â¼1.7 is obtained at 773 K in Mg3.1Co0.1Sb1.5Bi0.49Te0.01 The concept of manipulating the carrier scattering mechanism to improve the mobility should also be applicable to other material systems.