Self-assembly of graphene oxide flakes for smart and multifunctional coating with reversible formation of wrinkling patterns.

One of the main purposes of smart and multifunctional coatings is to have the versatility to be applied in a wide range of applications. However, the functions of smart materials are often highly limited. In particular, the stimuli-responsive lateral expansion of coatings based on 2D materials has not been reported before. This manuscript describes small two-dimensional graphene oxide (GO) flakes (e.g., thin sheets with a thickness of a few nanometers and much larger lateral dimensions) that act as elementary agents for the formation of smart and multifunctional coatings. The coating can be self-assembled from the GO flakes and disassembled flexibly when required. The coating is stimuli-responsive: upon localized contact with water, it expands and forms wrinkling patterns throughout its whole surface. Evaporating the water allows the wrinkles to disappear; hence, the process is reversible. This stimuli-responsiveness can be controlled to be reduced or completely switched off by temperature or pressure. These features are fundamentally due to the reversible intermolecular interactions among the flakes and favorable packing structure of the coating. The smart coating is shown to be useful for patterned fluidic systems of the desired shapes and the development of channels between fluidic reservoirs via the shortest path. Importantly, these results showed that a simple collection of uniquely 2D elementary agents with small nanoscale thickness can self-assemble into macroscopic materials that perform interactive and multifunctional operations.

Charging Organic Liquids by Static Charge.

Aqueous liquids can be charged effectively by a number of methods for many important applications. Organic liquids, however, cannot be charged effectively by existing methods due to their low conductivities, especially the insulating nonpolar organic liquids; hence, there has not been any significant application developed based on charged organic liquids. This study describes an effective fundamental strategy for charging organic liquids, including nonpolar organic liquids: static charge is simply mixed into the liquid. Analyses suggested that the charged species are molecular ions that reside in the bulk of the liquid after charging. This method is simple and general, and the amount and polarity of charge can be flexibly tunable. The effectiveness of this method gives rise to opportunities for the development of novel applications. Charged organic droplets are manipulated for the first time by an electric field for controlling organic reactions. Particles with charge embedded in their bulk matrices are fabricated for the first time (i.e., via polymerizing the liquid monomers mixed with static charge). The charge in this novel class of bulk-charged particles is stable and permanent, especially when compared to the typical surface-charged particles. Simultaneous bulk-charged and bulk-magnetic particles are fabricated for the first time via simply mixing both the static charge and magnetic nanoparticles into the liquid monomers. These highly versatile particles are responsive to both electric and magnetic fields for practical applications.

Noncontact orientation of objects in three-dimensional space using magnetic levitation.

This paper describes several noncontact methods of orienting objects in 3D space using Magnetic Levitation (MagLev). The methods use two permanent magnets arranged coaxially with like poles facing and a container containing a paramagnetic liquid in which the objects are suspended. Absent external forcing, objects levitating in the device adopt predictable static orientations; the orientation depends on the shape and distribution of mass within the objects. The orientation of objects of uniform density in the MagLev device shows a sharp geometry-dependent transition: an analytical theory rationalizes this transition and predicts the orientation of objects in the MagLev device. Manipulation of the orientation of the levitating objects in space is achieved in two ways: (i) by rotating and/or translating the MagLev device while the objects are suspended in the paramagnetic solution between the magnets; (ii) by moving a small external magnet close to the levitating objects while keeping the device stationary. Unlike mechanical agitation or robotic selection, orienting using MagLev is possible for objects having a range of different physical characteristics (e.g., different shapes, sizes, and mechanical properties from hard polymers to gels and fluids). MagLev thus has the potential to be useful for sorting and positioning components in 3D space, orienting objects for assembly, constructing noncontact devices, and assembling objects composed of soft materials such as hydrogels, elastomers, and jammed granular media.

Tilted Magnetic Levitation Enables Measurement of the Complete Range of Densities of Materials with Low Magnetic Permeability.

Magnetic levitation (MagLev) of diamagnetic or weakly paramagnetic materials suspended in a paramagnetic solution in a magnetic field gradient provides a simple method to measure the density of small samples of solids or liquids. One major limitation of this method, thus far, has been an inability to measure or manipulate materials outside of a narrow range of densities (0.8 g/cm(3) < ρ < 2.3 g/cm(3)) that are close in density to the suspending, aqueous medium. This paper explores a simple method-"tilted MagLev"-to increase the range of densities that can be levitated magnetically. Tilting the MagLev device relative to the gravitational vector enables the magnetic force to be decreased (relative to the magnetic force) along the axis of measurement. This approach enables many practical measurements over the entire range of densities observed in matter at ambient conditions-from air bubbles (ρ ≈ 0) to osmium and iridium (ρ ≈ 23 g/cm(3)). The ability to levitate, simultaneously, objects with a broad range of different densities provides an operationally simple method that may find application to forensic science (e.g., for identifying the composition of miscellaneous objects or powders), industrial manufacturing (e.g., for quality control of parts), or resource-limited settings (e.g., for identifying and separating small particles of metals and alloys).

High-Sensitivity Measurement of Density by Magnetic Levitation.

This paper presents methods that use Magnetic Levitation (MagLev) to measure very small differences in density of solid diamagnetic objects suspended in a paramagnetic medium. Previous work in this field has shown that, while it is a convenient method, standard MagLev (i.e., where the direction of magnetization and gravitational force are parallel) cannot resolve differences in density <10(-4) g/cm(3) for macroscopic objects (>mm) because (i) objects close in density prevent each other from reaching an equilibrium height due to hard contact and excluded volume, and (ii) using weaker magnets or reducing the magnetic susceptibility of the medium destabilizes the magnetic trap. The present work investigates the use of weak magnetic gradients parallel to the faces of the magnets as a means of increasing the sensitivity of MagLev without destabilization. Configuring the MagLev device in a rotated state (i.e., where the direction of magnetization and gravitational force are perpendicular) relative to the standard configuration enables simple measurements along the axes with the highest sensitivity to changes in density. Manipulating the distance of separation between the magnets or the lengths of the magnets (along the axis of measurement) enables the sensitivity to be tuned. These modifications enable an improvement in the resolution up to 100-fold over the standard configuration, and measurements with resolution down to 10(-6) g/cm(3). Three examples of characterizing the small differences in density among samples of materials having ostensibly indistinguishable densities-Nylon spheres, PMMA spheres, and drug spheres-demonstrate the applicability of rotated Maglev to measuring the density of small (0.1-1 mm) objects with high sensitivity. This capability will be useful in materials science, separations, and quality control of manufactured objects.

Solid-to-Liquid Charge Transfer for Generating Droplets with Tunable Charge.

Charged liquid droplets are typically generated by a high-voltage power supply. Herein, a previously unreported method is used for charging liquid droplets: by transferring charge from an insulating solid surface charged by contact electrification to the droplets. Charging the solid surface by contact electrification involves bringing it into contact with another solid surface for generating static charge. Subsequently, water droplets that flow across the surface are found to be charged-thus, the charge is readily transferred from solid to liquid. The charge of the droplets can be tuned continuously from positive to negative by varying the way the solid surface is charged. The amount of charge generated is sufficient for manipulating, coalescing, and sorting the water droplets by solid surfaces charged by contact electrification. This method of generating charged droplets is general, simple, inexpensive, and does not need any additional equipment or power supply.

Charging of multiple interacting particles by contact electrification.

Many processes involve the movement of a disordered collection of small particles (e.g., powders, grain, dust, and granular foods). These particles move chaotically, interact randomly among themselves, and gain electrical charge by contact electrification. Understanding the mechanisms of contact electrification of multiple interacting particles has been challenging, in part due to the complex movement and interactions of the particles. To examine the processes contributing to contact electrification at the level of single particles, a system was constructed in which an array of millimeter-sized polymeric beads of different materials were agitated on a dish. The dish was filled almost completely with beads, such that beads did not exchange positions. At the same time, during agitation, there was sufficient space for collisions with neighboring beads. The charge of the beads was measured individually after agitation. Results of systematic variations in the organization and composition of the interacting beads showed that three mechanisms determined the steady-state charge of the beads: (i) contact electrification (charging of beads of different materials), (ii) contact de-electrification (discharging of beads of the same charge polarity to the atmosphere), and (iii) a long-range influence across beads not in contact with one another (occurring, plausibly, by diffusion of charge from a bead with a higher charge to a bead with a lower charge of the same polarity).

Microtubule guidance tested through controlled cell geometry.

In moving cells dynamic microtubules (MTs) target and disassemble substrate adhesion sites (focal adhesions; FAs) in a process that enables the cell to detach from the substrate and propel itself forward. The short-range interactions between FAs and MT plus ends have been observed in several experimental systems, but the spatial overlap of these structures within the cell has precluded analysis of the putative long-range mechanisms by which MTs growing through the cell body reach FAs in the periphery of the cell. In the work described here cell geometry was controlled to remove the spatial overlap of cellular structures thus allowing for unambiguous observation of MT guidance. Specifically, micropatterning of living cells was combined with high-resolution in-cell imaging and gene product depletion by means of RNA interference to study the long-range MT guidance in quantitative detail. Cells were confined on adhesive triangular microislands that determined cell shape and ensured that FAs localized exclusively at the vertices of the triangular cells. It is shown that initial MT nucleation at the centrosome is random in direction, while the alignment of MT trajectories with the targets (i.e. FAs at vertices) increases with an increasing distance from the centrosome, indicating that MT growth is a non-random, guided process. The guided MT growth is dependent on the presence of FAs at the vertices. The depletion of either myosin IIA or myosin IIB results in depletion of F-actin bundles and spatially unguided MT growth. Taken together our findings provide quantitative evidence of a role for long-range MT guidance in MT targeting of FAs.

Static charge is an ionic molecular fragment.

What is static charge? Despite the long history of research, the identity of static charge and mechanism by which static is generated by contact electrification are still unknown. Investigations are challenging due to the complexity of surfaces. This study involves the molecular-scale analysis of contact electrification using highly well-defined surfaces functionalized with a self-assembled monolayer of alkylsilanes. Analyses show the elementary molecular steps of contact electrification: the exact location of heterolytic cleavage of covalent bonds (i.e., Si-C bond), exact charged species generated (i.e., alkyl carbocation), and transfer of molecular fragments. The strong correlation between charge generation and molecular fragments due to their signature odd-even effects further shows that contact electrification is based on cleavage of covalent bonds and transfer of ionic molecular fragments. Static charge is thus an alkyl carbocation; in general, it is an ionic molecular fragment. This mechanism based on cleavage of covalent bonds is applicable to general types of insulating materials, such as covalently bonded polymers. The odd-even effect of charging caused by the difference of only one atom explains the highly sensitive nature of contact electrification.

Functional polymeric molecules for performing autonomous synthesis of particles with core-shell structures and customizable shapes.

Self-organization by the directed migration of components within a system is an important process in many applications, such as the unidirectional migration of motor proteins for transporting items to specific sites in a cell. This manuscript describes a class of functional polymeric molecules that have a set of instructions written by specific chemical moieties. These instructions allow the functional polymeric molecules to be used for autonomous synthesis of particles: particles with both functional core-shell structure and customizable shapes are fabricated for the first time. The functional polymeric molecules direct the large-scale migration of the liquid molecules to specific sites for forming the required customized structure of the particle, thus overcoming previous challenges of fabricating this class of particles. This first synthesis of this class of particles enables the development of novel applications: the concept of shape specificity for targeting sites. Both the basic structural properties (core-shell structure and customizable shape) are used in the specific applications of targeted drug delivery and imaging. The secure physical fit due to the complementary shapes enables the particles to remain locked in position for the targeting. Polymeric molecules are first shown to be highly capable of being encoded with instructions for autonomous synthesis of structured materials.

Recent Advances in Triboelectric Nanogenerators: From Technological Progress to Commercial Applications.

Serious climate changes and energy-related environmental problems are currently critical issues in the world. In order to reduce carbon emissions and save our environment, renewable energy harvesting technologies will serve as a key solution in the near future. Among them, triboelectric nanogenerators (TENGs), which is one of the most promising mechanical energy harvesters by means of contact electrification phenomenon, are explosively developing due to abundant wasting mechanical energy sources and a number of superior advantages in a wide availability and selection of materials, relatively simple device configurations, and low-cost processing. Significant experimental and theoretical efforts have been achieved toward understanding fundamental behaviors and a wide range of demonstrations since its report in 2012. As a result, considerable technological advancement has been exhibited and it advances the timeline of achievement in the proposed roadmap. Now, the technology has reached the stage of prototype development with verification of performance beyond the lab scale environment toward its commercialization. In this review, distinguished authors in the world worked together to summarize the state of the art in theory, materials, devices, systems, circuits, and applications in TENG fields. The great research achievements of researchers in this field around the world over the past decade are expected to play a major role in coming to fruition of unexpectedly accelerated technological advances over the next decade.

Contact de-electrification of electrostatically charged polymers.

The contact electrification of insulating organic polymers is still incompletely understood, in part because multiple fundamental mechanisms may contribute to the movement of charge. This study describes a mechanism previously unreported in the context of contact electrification: that is, "contact de-electrification", a process in which polymers charged to the same polarity discharge on contact. Both positively charged polymeric beads, e.g., polyamide 6/6 (Nylon) and polyoxymethylene (Delrin), and negatively charged polymeric beads, e.g., polytetrafluoroethylene (Teflon) and polyamide-imide (Torlon), discharge when the like-charged beads are brought into contact. The beads (both with charges of ∼±20 µC/m(2), or ∼100 charges/µm(2)) discharge on contact regardless of whether they are made of the same material, or of different materials. Discharge is rapid: discharge of flat slabs of like-charged Nylon and Teflon pieces is completed on a single contact (∼3 s). The charge lost from the polymers during contact de-electrification transfers onto molecules of gas in the atmosphere. When like-charged polymers are brought into contact, the increase in electric field at the point of contact exceeds the dielectric breakdown strength of the atmosphere and ionizes molecules of the gas; this ionization thus leads to discharge of the polymers. The detection (using a Faraday cup) of charges transferred to the cup by the ionized gas is compatible with the mechanism. Contact de-electrification occurs for different polymers and in atmospheres with different values of dielectric breakdown strength (helium, argon, oxygen, carbon dioxide, nitrogen, and sulfur hexafluoride): the mechanism thus appears to be general.

Measuring binding of protein to gel-bound ligands using magnetic levitation.

This paper describes the use of magnetic levitation (MagLev) to measure the association of proteins and ligands. The method starts with diamagnetic gel beads that are functionalized covalently with small molecules (putative ligands). Binding of protein to the ligands within the bead causes a change in the density of the bead. When these beads are suspended in a paramagnetic aqueous buffer and placed between the poles of two NbFeB magnets with like poles facing, the changes in the density of the bead on binding of protein result in changes in the levitation height of the bead that can be used to quantify the amount of protein bound. This paper uses a reaction-diffusion model to examine the physical principles that determine the values of rate and equilibrium constants measured by this system, using the well-defined model system of carbonic anhydrase and aryl sulfonamides. By tuning the experimental protocol, the method is capable of quantifying either the concentration of protein in a solution, or the binding affinities of a protein to several resin-bound small molecules simultaneously. Since this method requires no electricity and only a single piece of inexpensive equipment, it may find use in situations where portability and low cost are important, such as in bioanalysis in resource-limited settings, point-of-care diagnosis, veterinary medicine, and plant pathology. It still has several practical disadvantages. Most notably, the method requires relatively long assay times and cannot be applied to large proteins (>70 kDa), including antibodies. The design and synthesis of beads with improved characteristics (e.g., larger pore size) has the potential to resolve these problems.

Magnetic levitation as a platform for competitive protein-ligand binding assays.

This paper describes a method based on magnetic levitation (MagLev) that is capable of indirectly measuring the binding of unlabeled ligands to unlabeled protein. We demonstrate this method by measuring the affinity of unlabeled bovine carbonic anhydrase (BCA) for a variety of ligands (most of which are benzene sulfonamide derivatives). This method utilizes porous gel beads that are functionalized with a common aryl sulfonamide ligand. The beads are incubated with BCA and allowed to reach an equilibrium state in which the majority of the immobilized ligands are bound to BCA. Since the beads are less dense than the protein, protein binding to the bead increases the overall density of the bead. This change in density can be monitored using MagLev. Transferring the beads to a solution containing no protein creates a situation where net protein efflux from the bead is thermodynamically favorable. The rate at which protein leaves the bead for the solution can be calculated from the rate at which the levitation height of the bead changes. If another small molecule ligand of BCA is dissolved in the solution, the rate of protein efflux is accelerated significantly. This paper develops a reaction-diffusion (RD) model to explain both this observation, and the physical-organic chemistry that underlies it. Using this model, we calculate the dissociation constants of several unlabeled ligands from BCA, using plots of levitation height versus time. Notably, although this method requires no electricity, and only a single piece of inexpensive equipment, it can measure accurately the binding of unlabeled proteins to small molecules over a wide range of dissociation constants (K(d) values within the range from ~10 nM to 100 µM are measured easily). Assays performed using this method generally can be completed within a relatively short time period (20 min-2 h). A deficiency of this system is that it is not, in its present form, applicable to proteins with molecular weight greater than approximately 65 kDa.

Design, Implementation, Simulation, and Visualization of a Highly Efficient RIM Microfluidic Mixer for Rapid Freeze-Quench of Biological Samples.

Rapid freeze-quench (RFQ) trapping of short-lived reaction intermediates for spectroscopic study plays an important role in the characterization of biological reactions. Recently there has been considerable effort to achieve submillisecond reaction deadtimes. We present here a new, robust, high-velocity microfluidic mixer that enables such rapid freeze-quenching. It is a based on the mixing method of two impinging jets commonly used in reaction injection molding (RIM) of plastics. This method achieves efficient mixing by inducing chaotic flow at relatively low Reynolds numbers (Re =140). We present the first mathematical simulation and microscopic visualization of mixing in such RFQ micromixers, the results of which show that the impinging solutions efficiently mix within the mixing chamber. These tests, along with a practical demonstration in a RFQ setup that involves copper wheels, show this new mixer can in practice provide reaction deadtimes as low as 100 microseconds.

Performing calculus: Asymmetric adaptive stimuli-responsive material for derivative control.

Materials (e.g., brick or wood) are generally perceived as unintelligent. Even the highly researched "smart" materials are only capable of extremely primitive analytical functions (e.g., simple logical operations). Here, a material is shown to have the ability to perform (i.e., without a computer), an advanced mathematical operation in calculus: the temporal derivative. It consists of a stimuli-responsive material coated asymmetrically with an adaptive impermeable layer. Its ability to analyze the derivative is shown by experiments, numerical modeling, and theory (i.e., scaling between derivative and response). This class of freestanding stimuli-responsive materials is demonstrated to serve effectively as a derivative controller for controlled delivery and self-regulation. Its fast response realizes the same designed functionality and efficiency as complex industrial derivative controllers widely used in manufacturing. These results illustrate the possibility to associate specifically designed materials directly with higher concepts of mathematics for the development of "intelligent" material-based systems.

Customizable drug tablets with constant release profiles via 3D printing technology.

Medicine should ideally be personalized as each individual has his/her own unique biological, physical, and medical dispositions. Medicine can be personalized by customizing drug tablets with the specific drug dosages, release durations, and combinations of multiple drugs. This study presents a method for fabricating drug tablets with customizable dosages, durations, and combinations of multiple drugs by using the 3D printing technology. The method focuses on fabricating customizable drug tablets with a very simple structure for delivering the constant release profile due to its importance in treatment (i.e., the drug may produce side effects if too much is released andmay not have therapeutic value is too little is released). The method is simple: it involves first printing a template using the 3D printer and fabricating the drug tablet via the template. The tablets are customized by varying the amount of excipient used, the height of the tablet, and the numberand amount of drugs used. Three different common drugs (i.e., paracetamol, phenylephrine HCl and diphenhydramine HCl) and FDA-approved excipients are studied. The simplicity of the structure of the tablet and method via templating allows the fabrication of these fully customizable drug tablets to be easily performed, low-cost, efficient, and safe for consumption. These features enable the customizable tablets to be made widely accessible to the public; hence, the concept of personalized medicine can be realized.

Photoswitchable catalysis mediated by dynamic aggregation of nanoparticles.

Catalytic activity of gold nanoparticles in a hydrosilylation reaction is controlled by irradiation with UV or visible light. When exposed to UV, the particles aggregate and the catalysis is effectively switched "off". When the particles are exposed to visible light, the particles redisperse and catalysis can proceed.

Maze solving by chemotactic droplets.

Droplets emitting surface-active chemicals exhibit chemotaxis toward low-pH regions. Such droplets are self-propelled and navigate through a complex maze to seek a source of acid placed at one of the maze's exits. In doing so, the droplets find the shortest path through the maze. Chemotaxis and maze solving are due to an interplay between acid/base chemistry and surface tension effects.

Sequential reactions directed by core/shell catalytic reactors.

Millimeter-sized reactor particles made of permeable polymer doped with catalysts arranged in a core/shell fashion direct sequences of chemical reactions (e.g., alkyne coupling followed by hydrogenation or hydrosilylation followed by hydrogenation). Spatial compartmentalization of catalysts coupled with the diffusion of substrates controls reaction order and avoids formation of byproducts. The experimentally observed yields of reaction sequences are reproduced by a theoretical model, which accounts for the reaction kinetics and the diffusion of the species involved.