RESUMEN
This study proposes a microfluidic device capable of separating monocytes from a type of cancer cell that is called T-cell acute lymphoblastic leukemia (RPMI-8402) in a continuous flow using negative and positive dielectrophoretic forces. The use of both the hydrodynamic and dielectrophoretic forces allows the separation of RPMI-8402 from monocytes based on differences in their intrinsic electrical properties and sizes. The specific crossover frequencies of monocytes and RPMI-8402 cells have been obtained experimentally. The optimum ranges of electrode pitch-to-channel height ratio at the cross sections with different electrode widths have been generally calculated by numerical simulations of the gradients of the electric field intensities and calculation their effective values (root-mean-square). In the device, the cell sorting has been conducted empirically, and then, the separation performance has been evaluated by analyzing the images before and after dielectrophoretic forces applied to the cells. In this work, the design of a chip with 77 µm gold-titanium electrode pitch was investigated to achieve high purity of monocytes of 95.2%. The proposed device can be used with relatively low applied voltages, as low as 16.5 V (peak to peak). Thus, the design can be used in biomedical diagnosis and chemical analysis applications as a lab-on-chip platform. Also, it can be used for the separation of biological cells such as bacteria, RNA, DNA, and blood cells.
Asunto(s)
Separación Celular , Electroforesis , Dispositivos Laboratorio en un Chip , Técnicas Analíticas Microfluídicas , Monocitos/metabolismo , Neoplasias/metabolismo , Electrodos , HumanosRESUMEN
Conductive nanofibrous scaffolds with that can conduct electrical current have a great potential in neural tissue engineering. The purpose of this study was to survey effects of electrical stimulation and polycaprolactone/polypyrrole/multiwall carbon nanotube (PCL/PPY/MWCNTs) fibrous scaffold on photoreceptor differentiation of trabecular meshwork mesenchymal stem cells (TM-MSCs). PCL/PPY/MWCNTs scaffold was made by electrospinning method. TM-MSCs were seeded on PCL/PPY/MWCNTs scaffold and stimulated with a potential of 115 V/m. Scanning electron microscopy, transmission electron microscopy, and FT-IR were used to evaluate the fabricated scaffold. Immunofluorescence and quantitative real-time polymerase chain reaction were used to examine differentiated cells. Scanning electron microscopy, transmitting electron microscopy, and FT-IR confirmed the creation of the composite structure of fibers. RT-qPCR analysis showed that the expression of rhodopsin and peripherin genes in electrically stimulated cells were significantly higher (5.7- and 6.23-fold, respectively; p ≤ 0.05) than those with no electrical stimulation. Collectively, it seems that the combination of PCL/PPY/MWCNTs scaffold, as a suitable conductive scaffold, and electrical stimulation could be an effective approach in the differentiation of stem cells in retinal tissue engineering.
RESUMEN
An electrical stimulus is a new approach to neural differentiation of stem cells. In this work, the neural differentiation of conjunctiva mesenchymal stem cells (CJMSCs) on a new 3D conductive fibrous scaffold of silk fibroin (SF) and reduced graphene oxide (rGo) were examined. rGo (3.5% w/w) was dispersed in SF-acid formic solution (10% w/v) and conductive nanofibrous scaffold was fabricated using the electrospinning method. SEM and TEM microscopies were used for fibrous scaffold characterization. CJMSCs were cultured on the scaffold and 2 electrical impulse models (Current 1:115 V/m, 100-Hz frequency and current 2:115 v/m voltages, 0.1-Hz frequency) were applied for 7 days. Also, the effect of the fibrous scaffold and electrical impulses on cell viability and neural gene expression were examined using MTT assay and qPCR analysis. Fibrous scaffold with the 220 ± 20 nm diameter and good dispersion of graphene nanosheets at the surface of nanofibers were fabricated. The MTT result showed the viability of cells on the scaffold, with current 2 lower than current 1. qPCR analysis confirmed that the expression of ß-tubulin (2.4-fold P ≤ 0.026), MAP-2 (1.48-fold; P ≤ 0.03), and nestin (1.5-fold; P ≤ 0.03) genes were higher in CJMSCs on conductive scaffold with 100-Hz frequency compared to 0.1-Hz frequency. Collectively, we proposed that SF-rGo fibrous scaffolds, as a new conductive fibrous scaffold with electrical stimulation are good strategies for neural differentiation of stem cells and the type of electrical pulses has an influence on neural differentiation and proliferation of CJMSCs.
Asunto(s)
Conjuntiva/citología , Células Madre Mesenquimatosas/citología , Neurogénesis , Ingeniería de Tejidos/instrumentación , Andamios del Tejido/química , Animales , Reactores Biológicos , Bombyx/química , Células Cultivadas , Conductividad Eléctrica , Estimulación Eléctrica/instrumentación , Diseño de Equipo , Fibroínas/química , Humanos , Nanofibras/química , Nanofibras/ultraestructuraRESUMEN
OBJECTIVE: We present a four-branch model of the dielectrophoresis (DEP) method that takes into consideration the inherent properties of particles, including size, electrical conductivity, and permittivity coefficient. By using this model, bioparticles can be continuously separated by the application of only a one-stage separation process. MATERIALS AND METHODS: In this numerical study, we based the separation process on the differences in the particle sizes. We used the various negative DEP forces on the particles caused by the electrodes to separate them with a high efficiency. The particle separator could separate blood cells because of their different sizes. RESULTS: Blood cells greater than 12 µm were guided to a special branch, which improved separation efficiency because it prevented the deposition of particles in other branches. The designed device had the capability to separate blood cells with diameters of 2.0 µm, 6.2 µm, 10.0 µm, and greater than 12.0 µm. The applied voltage to the electrodes was 50 V with a frequency of 100 kHz. CONCLUSION: The proposed device is a simple, efficient DEP-based continuous cell separator. This capability makes it ideal for use in various biomedical applications, including cell therapy and cell separation, and results in a throughput increment of microfluidics devices.