RESUMEN
PURPOSE: To use NanoDot dosimeters to study the RS 2000 X-ray Biological Irradiator dosimetry characteristics and perform in vivo dosimetry for cell or small animal experiments. METHODS AND MATERIALS: We first calibrated the Landauer NanoDot(™) Reader by irradiating some NanoDot dosimeters with a set of known doses at specific positions defined by the irradiator. A group of five NanoDot dosimeters were placed at five specific positions where the dose rates were known and provided by the irradiator. Each group was irradiated for a set of times respectively. By correlating the readings of dosimeters with the given irradiated doses, we established the dose-reading relationship for the irradiator under the specific running condition. The established calibration curve was validated by exposing arbitrary known doses to a set of dosimeters, using the Landauer NanoDot(™) Reader to measure the doses, and then making the comparison between the two doses. To study the dose gradient of the X-ray inside the irradiated target (dose variation/cm), we placed dosimeters under different thicknesses of water-equivalent bolus and irradiated them, then measured the doses to determine the dose gradient. RESULTS: Using the method described above, we were able to calibrate the Landauer InLight NanoDot(™) Reader and use NanoDot dosimeters to measure the actual doses delivered to the targets for the cell/small animal experiments that use the RS 2000 X-ray Biological Irradiator. CONCLUSIONS: NanoDots are ideal dosimeters to use for in vivo dosimetry for cell/small animal irradiation experiments. The dose decrease inside the animal tissue is about 20% per cm.