Antibacterial properties of marine algae incorporated polylactide acid membranes as an alternative to clinically applied different collagen membranes.

The reconstruction of bony defects in the alveolar crest poses challenges in dental practice. Guided tissue regeneration (GTR) and guided bone regeneration (GBR) procedures utilize barriers to promote bone regeneration and prevent epithelial growth. This study focuses on evaluating the antibacterial properties of marine algae-polylactic acid (PLA) composite membranes compared to commercially available collagen membranes. Marine algae (Corallina elongata, Galaxaura oblongata, Cystoseira compressa, Saragassum vulgare, and Stypopodium schimperi) were processed into powders and blended with PLA to fabricate composite membranes. Cytocompatibility assays using human periodontal ligament fibroblasts (n = 3) were performed to evaluate biocompatibility. Antibacterial effects were assessed through colony-forming units (CFU) and scanning electron microscopy (SEM) analysis of bacterial colonization on the membranes. The cytocompatibility assays demonstrated suitable biocompatibility of all marine algae-PLA composite membranes with human periodontal ligament fibroblasts. Antibacterial assessment revealed that Sargassum vulgare-PLA membranes exhibited the highest resistance to bacterial colonization, followed by Galaxaura oblongata-PLA and Cystoseira compressa-PLA membranes. SEM analysis confirmed these findings and revealed smooth surface textures for the marine algae-PLA membranes compared to the fibrous and porous structures of collagen membranes. Marine algae-PLA composite membranes show promising antibacterial properties and cytocompatibility for guided bone and tissue regeneration applications. Sargassum vulgare-PLA membranes demonstrated the highest resistance against bacterial colonization. These findings suggest that marine algae-PLA composite membranes could serve as effective biomaterials for infection control and tissue regeneration. Further in vivo validation and investigation of biodegradation properties are necessary to explore their clinical potential.

Comparative Assessment of the Primary Stability of Straumann BLX Implant Design Using an In Vitro Sinus Lift-Simultaneous Implant Insertion Model.

Straumann BLX is a novel implant system that has been proclaimed to provide an ideal primary stability in all types of bone. In the current study, the primary stability of the Straumann BLX implant systems with Straumann tapered effect (TE) implants have been comparatively assessed in bovine ribs by using a simultaneous sinus elevation and implant insertion model. In the study group, BLX (4.0 × 12 mm), TE (4.1 × 12 mm), BLX (4.5 × 12 mm), and TE (4.8 × 12 mm) were placed in each bony window, which resembles the sinus maxillaris. As a control, BLX and TE implants with the same sizes were inserted into the proximal diaphysis of the bovine ribs. A total of 40 implant insertions were performed. Stability was measured with resonance frequency analysis. In the study group, 4.8-mm TE implants showed significantly higher values compared with 4.5-mm BLX implants (P = .116). However, 4.0-mm BLX implants in the control group showed higher stability compared with 4.0-mm-diameter TE (P = .014). The primary stability of the BLX implants in the control group was significantly higher compared with the experimental group in both widths (P= .018 for BLX 4.0 mm and P = .002 for BLX 4.5 mm, respectively). The use of the TE design with a wide diameter in simultaneous implant placement with sinus lift could present higher implant stability quotient values and might be a more appropriate option for implant recipient sites with poor bone volume and quality. However, the advantage of BLX design in standard implant insertion protocols could be of value.

Navigational exploration of bony defect mimicking a solid lesion of the mandible compared to conventional surgery by young professionals.

INTRODUCTION: The aim of the current study was to evaluate the accuracy of resection a solid lesion in an acrylic lower jaw by young professionals using a dynamic computer-assisted surgical system comparted to conventional surgery technique. MATERIAL AND METHODS: Twenty students performed the removal of the lesion conventionally and twenty students did the operation with a dynamic computer-assisted surgical system. Both groups were compared regarding the defect size, operation time, and surgical complications. RESULTS: The defect size in the jaw was significant smaller with the navigated surgery (p < 0.001). Operation time was shorter without navigation system, but no significance was found (p = 0.137). Without navigation system three young professionals perforated the lingual cortex. DISCUSSION: Navigated surgery can immediately be used by young professionals and support young surgeons in everyday clinical practice, especially in operations with difficult anatomic situations.

Bone regeneration in critical-size defects of the mandible using biomechanically adapted CAD/CAM hybrid scaffolds: An in vivo study in miniature pigs.

The study aimed to analyze bone regeneration in critical-size defects using hybrid scaffolds biomechanically adapted to the specific defect and adding the growth factor rhBMP-2. For this animal study, ten minipigs underwent bilateral defects in the corpus mandibulae and were subsequently treated with novel cylindrical hybrid scaffolds. These scaffolds were designed digitally to suit the biomechanical requirements of the mandibular defect, utilizing finite element analysis. The scaffolds comprised zirconium dioxide-tricalcium phosphate (ZrO2-TCP) support struts and TCP foam ceramics. One scaffold in each animal was loaded with rhBMP-2 (100 µg/cm³), while the other served as an unloaded negative control. Fluorescent dyes were administered every 2 weeks, and computed tomography (CT) scans were conducted every 4 weeks. Euthanasia was performed after 3 months, and samples were collected for examination using micro-CT and histological evaluation of both hard and soft tissue. Intravital CT examinations revealed minor changes in radiographic density from 4 to 12 weeks postoperatively. In the group treated with rhBMP-2, radiographic density shifted from 2513 ± 128 (mean ± SD) to 2606 ± 115 Hounsfield units (HU), while the group without rhBMP-2 showed a change from 2430 ± 131 to 2601 ± 67 HU. Prior to implantation, the radiological density of samples measured 1508 ± 30 mg HA/cm³, whereas post-mortem densities were 1346 ± 71 mg HA/cm³ in the rhBMP-2 group and 1282 ± 91 mg HA/cm³ in the control group (p = 0.045), as indicated by micro-CT measurements. The histological assessment demonstrated successful ossification in all specimens. The newly formed bone area proportion was significantly greater in the rhBMP-2 group (48 ± 10%) compared with the control group without rhBMP-2 (42 ± 9%, p = 0.03). The mean area proportion of remaining TCP foam was 23 ± 8% with rhBMP-2 and 24 ± 10% without rhBMP-2. Successful bone regeneration was accomplished by implanting hybrid scaffolds into critical-size mandibular defects. Loading these scaffolds with rhBMP-2 led to enhanced bone regeneration and a uniform distribution of new bone formation within the hybrid scaffolds. Further studies are required to determine the adaptability of hybrid scaffolds for larger and potentially segmental defects in the maxillofacial region.

Pronounced mediastinal emphysema after restorative treatment of the lower left molar-a case report and a systematic review of the literature.

This case report presents an iatrogenic induced mediastinal emphysema after restorative treatment of the lower left second molar, aimed to highlight the potential life-threatening consequences, and providing diagnostics and treatment concepts of complicated dental induced emphysema based on literature review. A 74-year-old female patient was admitted to the emergency department due to a fall on her shoulder. Additional finding was a significant swelling of the face and neck. In the computer tomography of the head, neck, and thorax, a humerus fracture and pronounced soft tissue emphysema from the infraorbital region to the mediastinum was detected. The patient reported that she had been treated by her dentist 4 days earlier. The treatment had to be discontinued after beginning of a pronounced swelling. Other reasons for the emphysema could be excluded out on an interdisciplinary teamwork. The patient was monitored as an inpatient for 5 days and received intravenous antibiotic therapy. This case report shows the rare complication of pronounced mediastinal emphysema after root canal treatment. Emphysema should always be a differential diagnosis of soft tissue swelling and, in case of doubt, a general medical presentation should be made.

Can Currently Suggested Quality Indicators Be Transferred to Meningioma Surgery?-A Single-Center Pilot Study.

BACKGROUND: Risk stratification based on standardized quality measures has become crucial in neurosurgery. Contemporary quality indicators have often been developed for a wide range of neurosurgical procedures collectively. The accuracy of tumor-inherent characteristics of patients diagnosed with meningioma remains questionable. The objective of this study was the analysis of currently applied quality indicators in meningioma surgery and the identification of potential new measures. METHODS: Data of 133 patients who were operated on due to intracranial meningiomas were subjected to a retrospective analysis. The primary outcomes of interest were classical quality indicators such as the 30-day readmission, 30-day reoperation, 30-day mortality, 30-day nosocomial infection, and the 30-day surgical site infection rate. Uni- and multivariate analyses were performed. The occurrence of a new postoperative neurologic deficit was analyzed as a potential new quality indicator. RESULTS: The overall unplanned readmission rate was 3.8%; 13 patients were reoperated within 30 days (9.8%). The 30-day nosocomial infection and surgical site infection rates were 6.8 and 1.5%, respectively. A postoperative new neurologic deficit or neurologic deterioration as a currently assessed quality feature was observed in 12 patients (9.2%). The edema volume on preoperative scans proved to have a significant impact on the occurrence of a new postoperative neurologic deficit (p = 0.023). CONCLUSIONS: Classical quality indicators in neurosurgery have proved to correlate with considerable deterioration of the patient's health in meningioma surgery and thus should be taken into consideration for application in meningioma patients. The occurrence of a new postoperative neurologic deficit is common and procedure specific. Thus, this should be elucidated for application as a complementary quality indicator in meningioma surgery.

A technical feasibility study on adaptation of a microsurgical robotic system to an intraoperative complication management in dental implantology: perforated Schneiderian membrane repair using Symani® Surgical System.

The aim of the current study was to test the technical and clinical feasibility of a robotic system and investigate its potential in the surgical repair of perforated Schneiderian membranes using an ex-vivo porcine model. Eight pig heads were operated conventionally via a surgical loop and eight pig heads with the surgical robot "Symani® Surgical System" (Medical Microinstruments, Inc., Pisa, Italy). On each specimen, the Schneiderian membrane was incised over a length of 0.7 mm resembling a perforation. Operation time, the maximum sinusoidal pressure, the course of the pressure and the filling volume were measured. Additionally, adaptation of the wound edges has been detected via scanning electron microscopy. There were no significant differences for the pressure maximum (p = 0.528), for the time until the pressure maximum was reached (p = 0.528), or for the maximum filling volume (p = 0.674). The time needed for the suturing of the membrane via robotic surgery was significantly longer (p < 0.001). However, the scanning electron microscope revealed a better adaptation of the wound edges with robotic surgery. The technical feasibility of robot-assisted suturing of Schneiderian membrane laceration using the robotic system has been confirmed for the first time. No differences considering the pressure resistance compared to the conventional repair could be observed, but advantages in wound adaptation could be found with an electron microscope. Regarding the material and training costs and limited indications spectrum, robotic surgery systems still might not present financially feasible options in the daily dental practice yet.

Systematic review on diabetes mellitus and dental implants: an update.

PURPOSE: Dental implant surgery was developed to be the most suitable and comfortable instrument for dental and oral rehabilitation in the past decades, but with increasing numbers of inserted implants, complications are becoming more common. Diabetes mellitus as well as prediabetic conditions represent a common and increasing health problem (International Diabetes Federation in IDF Diabetes Atlas, International Diabetes Federation, Brussels, 2019) with extensive harmful effects on the entire organism [(Abiko and Selimovic in Bosnian J Basic Med Sci 10:186-191, 2010), (Khader et al., in J Diabetes Complicat 20:59-68, 2006, https://doi.org/10.1016/j.jdiacomp.2005.05.006 )]. Hence, this study aimed to give an update on current literature on effects of prediabetes and diabetes mellitus on dental implant success. METHODS: A systematic literature research based on the PRISMA statement was conducted to answer the PICO question "Do diabetic patients with dental implants have a higher complication rate in comparison to healthy controls?". We included 40 clinical studies and 16 publications of aggregated literature in this systematic review. RESULTS: We conclude that patients with poorly controlled diabetes mellitus suffer more often from peri-implantitis, especially in the post-implantation time. Moreover, these patients show higher implant loss rates than healthy individuals in long term. Whereas, under controlled conditions success rates are similar. Perioperative anti-infective therapy, such as the supportive administration of antibiotics and chlorhexidine, is the standard nowadays as it seems to improve implant success. Only few studies regarding dental implants in patients with prediabetic conditions are available, indicating a possible negative effect on developing peri-implant diseases but no influence on implant survival. CONCLUSION: Dental implant procedures represent a safe way of oral rehabilitation in patients with prediabetes or diabetes mellitus, as long as appropriate precautions can be adhered to. Accordingly, under controlled conditions there is still no contraindication for dental implant surgery in patients with diabetes mellitus or prediabetic conditions.

Robot-assisted scaffold implantation and two-stage flap raising of the greater omentum for reconstruction of the facial skeleton: Description of a novel technique.

BACKGROUND: Bone regeneration in the greater omentum is a promising strategy in facial skeleton reconstruction. This feasibility-study aims to perform robot-assisted scaffold implantation and second-stage flap raising. METHODS: Firstly, scaffolds were implanted into the greater omentum using the da Vinci Xi surgical system or conventional technique in five miniature pigs, respectively. After 3 months a free flap including the gastrocolic vascular pedicle was harvested and procedures were evaluated. RESULTS: The average operation time was 59.2 min for open surgery and 73.8 min for robot-assisted surgery. The average incision length of open surgery was 11.6 cm. Both techniques led to successful scaffold implantation without any complication. In all cases the scaffolds were integrated as intended and resulted in bone formation. CONCLUSIONS: Current study demonstrated that the implantation of scaffolds into the greater omentum and flap harvesting using da Vinci Xi surgical system is a promising minimally-invasive approach in regenerative surgery.

Investigation of Topographical Alterations in Titanium-Zirconium-Alloy Implant Threads following Er:YAG Irradiation.

The aim of the current experimental study was to comparatively assess the surface alterations in titanium and titanium-zirconium alloy implants in terms of thread pitch topography after irradiation with an Er:YAG laser, which is recommended in the literature for its sterilizing effect in the treatment of contaminated implant surfaces. Roxolid® and SLA® (Sand-blasted, Large-grit, Acid-etched) implants from Straumann® company with the same macro topography were investigated. The surface treatment was carried out using a wavelength of 2940 nm, 60 s irradiation time, a frequency of 10 Hz, and energies between 120 mJ and 250 mJ. The alterations were quantitatively analyzed by conducting roughness analysis via white light interferometry and qualitatively using SEM images. Roxolid® could particularly maintain its surface topography at a level of 160 mJ. At an energy level of 250 mJ, the surface properties of the pitch could be significantly altered for the first time. Compared to the Standard Plus dental implants studied, no distinct removal of the material from the surface was detected. The alloy properties of Roxolid® confirm the manufacturer's statement in terms of stability and could offer advantages in peri-implantitis management if decontamination has been selected. However, as a part of a respective strategy, smoothening of a Roxolid® implant surface requires a significantly higher energy level compared to SLA-Standard® dental implants.

Injury patterns and outcomes in bicycle-related maxillofacial traumata: A retrospective analysis of 162 cases.

The objective of the current study is to retrospectively evaluate cycling related dental and maxillofacial injuries and to gain insight into the epidemiology and results of these accidents. Data of patients who were admitted due to the maxillofacial injuries between April 2018 and September 2020 were retrospectively evaluated regarding the patients' characteristics, helmet wearing, type of radiological assessment required for diagnosis and therapy, injury patterns, duration of hospitalization and concomitant injuries. Data of 162 patients were included. 86 (53.08%) patients presented with at least one maxillofacial fracture. A total of 186 maxillofacial bones were fractured. Zygomatico-maxillary complex was the most commonly affected region (n:103, 55,36%). Analysis of the dental traumata revealed that crown fracture without pulp exposure was the most commonly observed entity (n:37, 32.46%) and upper central incisors (n:61, 53.50%) were the most commonly affected teeth. The overall ratio of the number of the fracture line/fracture case was 2.80. However, this ratio was statistically higher in e-bike cases (4.25) compared to non-e-bike riders (2.34) (p:0.014). Bicycle related maxillofacial injuries could correlate with specific morbidity rates and result in severe injuries of the maxillofacial region.

Changes in hormones of the thyroid axis after tracheostomy and their influence on regeneration in patients with head and neck cancer: A prospective study.

This prospective study aimed to compare and evaluate changes in hormones of the thyroid axis affected by tracheostomy due to surgical treatment in patients with oral cancer. The patients were evaluated with regard to serum levels of the thyroid axis - free T3/triiodothyronine (fT3) and free T4/thyroxine (fT4), as well as thyroid-stimulating hormone (TSH) - at fixed perioperative time points: during the tumor staging about 1 week before operation, immediately before and within 6 h after operation, 2 days after operation, and about 10 days after operation. Additionally, data on the patients' characteristics (age, gender), relevant secondary diagnoses, duration of ventilation in the intensive care unit, and perioperative complications were obtained and analyzed. In total, 51 patients with an average age of 68.29 years (±11.82) were included. Analyses of thyroid hormones directly before and after tracheostomy showed a significant postoperative decrease in circulating TSH (p = 0.005) and fT3 (p < 0.001), whilst a significant increase in fT4 values (p < 0.001) was found. Nine patients showed perioperative complications, such as infection, emphysema, or requiring a revision operation. Eleven patients were diagnosed with a cardiac problem or suffered from agitation after operation. Within the limitations of the study it seems that hormonal changes following tracheostomy in critically ill patients should be monitored and thyroid hormone adjustment should be taken into account because the latter might lead to lower mortality and morbidity during hospitalization in these patients. CLINICAL TRIAL REGISTRATION NUMBER: DRKS00023942.

Learning Curve and Comparison of Dynamic Implant Placement Accuracy Using a Navigation System in Young Professionals.

The aim of the current study was to evaluate the learning curve and accuracy of implant placement by young professionals using a dynamic computer-assisted surgical system for dental implant placement. Ten students tried to place eight implants with a dynamic surgical system in predefined positions on two consecutive weekends, resulting in 160 implant placements in total. Postoperatively, the positions of the implants were scanned with an intraoral scanner and compared for deviations at the entry point, the apex, as well as angular deviations to the master model. The mean values of all measurements improved; statistical significance was found for the changes in the angle as well as for the position of the implants to the apex (p < 0.001). Furthermore, the young professionals indicated subjective improvement in handling the dynamic surgery system. Navigated surgical dental implant placement can be learned quickly and can support young professionals in everyday clinical practice, especially in difficult anatomic situations.

Preferences and experiences regarding the treatment of obstructive sleep apnea with mandibular advancement splints - a cross-sectional pilot survey.

OBJECTIVE: To obtain a current overview of the use of mandibular advancement splints (MAS) as a therapeutic option for obstructive sleep apnea (OSA) in the dental profession in Northern Germany. METHODS: A questionnaire was mailed to 2431 dental professionals, and 8.3% responded. Descriptive data analysis was performed on each question separately. RESULTS: Most of the surveyed dentists (51.7%) estimated the success rate of MAS therapy to be higher than 75%. Analysis of the relationship between the number of splints prescribed annually and the dental specialization (p = 0.22), work experience (p = 0.14), estimated success rate of MAS therapy (p = 0.96), and discontinuation of MAS therapy (p = 0.57) revealed no significant correlations. CONCLUSION: Mandibular advancement splints seem to be a safe and successful therapy for OSA. There seems to be a lack of information on the patient side and a lack of education on the dentist side.

An experimental study on the effects of the cortical thickness and bone density on initial mechanical anchorage of different Straumann® implant designs.

BACKGROUND: The aim of the current study was to comparatively assess the primary stability of different Straumann® implant designs (BLX, Straumann Tapered Effect, Bone Level Tapered, and Standard Plus) via resonance frequency analysis by using an implant insertion model in freshly slaughtered bovine ribs with and without cortical bone. Tapered Effect (4.1 × 10 mm), Bone Level Tapered (4.1 × 10 mm), Standard Plus (4.1 × 10 mm), and BLX (4.0 × 10 mm) implants were inserted into the distal epiphysis on the longitudinal axis of the freshly slaughtered bovine ribs. As a control, implants with the same sizes were inserted into the proximal diaphysis. The stability of the implants was examined with resonance frequency analysis. RESULTS: BLX and Tapered Effect implants showed higher implant stability quotient values in both study and control groups. All implant systems showed a significant decrease of mechanical anchorage in the study group. BLX and Bone Level Tapered designs had a significantly lower loss of mechanical anchorage in the lack of cortical bone. CONCLUSION: Both Tapered Effect and BLX designs could ensure sufficient initial stability; however, BLX implants could be an appropriate option in the lack of cortical bone and poor bone quality at the implant recipient site. CLINICAL RELEVANCE: BLX is a novel implant system, which could be especially beneficial in the presence of spongious bone type at posterior maxillae.

Microbiological Characteristics and Surgical Management of Animal-Bite-Related Oral & Maxillofacial Injuries: A Single Center's Experience.

The objective of the current study is to retrospectively evaluate animal-bite injuries and to gain insight into the epidemiology, accident consequences and treatment concept of these accidents in oral and maxillofacial surgery. Data of patients, who were admitted January 2015 and April 2021, were retrospectively evaluated regarding the patients' characteristics (age, gender), facial distribution of substance defects/partial amputations, duration of hospitalization, operation treatments and antibiotic treatments. Data of 75 patients were included. Patients were bitten by dogs (n = 69.92%), cats (n = 4) and horses (n = 2). Lower eyelid/cheek complex was the most affected region (n = 37, 32.74%). Most of the patients between 0 and 3 years had to be operated on under general anesthesia (p = 0.011), while most of the adults could be operated on under local anesthesia (p = 0.007). In the age group 0-12 years, 30 patients (68%) were operated on under general anesthesia. Ampicillin/Sulbactam (48%) was the antibiotic most used. Antibiotics were adjusted after wound swabs in case of wound infections or critical wound conditions. This means that resistant antibiotics were stopped, and sensitive antibiotics were used. Structured surgical and antibiotic management of animal-bite wounds in the maxillofacial region is the most important factor for medical care to avoid long-term aesthetic consequences. Public health actions and policies under the leadership of an interdisciplinary committee could improve primary wound management, healing outcome and information status in the general population.

Comparison of implant placement accuracy in two different preoperative digital workflows: navigated vs. pilot-drill-guided surgery.

BACKGROUND: The aim of the study is to evaluate the accuracy of a new implant navigation system on two different digital workflows. METHODS: A total of 18 phantom jaws consisting of hard and non-warping plastic and resembling edentulous jaws were used to stimulate a clinical circumstance. A conventional pilot-drill guide was conducted by a technician, and a master model was set by using this laboratory-produced guide. After cone beam computed tomography (CBCT) and 3D scanning of the master models, two different digital workflows (marker tray in CBCT and 3D-printed tray) were performed based on the Digital Imaging Communication in Medicine files and standard tessellation language files. Eight Straumann implants (4.1 mm × 10 mm) were placed in each model, six models for each group, resulting in 144 implant placements in total. Postoperative CBCT were taken, and deviations at the entry point and apex as well as angular deviations were measured compared to the master model. RESULTS: The mean total deviations at the implant entry point for MTC (marker tray in CBCT), 3dPT (3d-printed tray), and PDG (pilot-drill guide) were 1.024 ± 0.446 mm, 1.027 ± 0.455 mm, and 1.009 ± 0.415 mm, respectively, and the mean total deviations at the implant apex were 1.026 ± 0.383 mm, 1.116 ± 0.530 mm, and 1.068 ± 0.384 mm. The angular deviation for the MTC group was 2.22 ± 1.54°. The 3dPT group revealed an angular deviation of 1.95 ± 1.35°, whereas the PDG group showed a mean angular deviation of 2.67 ± 1.58°. Although there were no significant differences among the three groups (P > 0.05), the navigation groups showed lesser angular deviations compared to the pilot-drill-guide (PDG) group. Implants in the 3D-printed tray navigation group showed higher deviations at both entry point and apex. CONCLUSIONS: The accuracy of the evaluated navigation system was similar with the accuracy of a pilot-drill guide. Accuracy of both preoperative workflows (marker tray in CBCT or 3D-printed tray) was reliable for clinical use.

2D Versus 3D in Laparoscopic Surgery by Beginners and Experts: A Randomized Controlled Trial on a Pelvitrainer in Objectively Graded Surgical Steps.

BACKGROUND AND OBJECTIVE: Progress in endoscopic surgery in the past few decades has led to the application of 3-dimensional (3D) procedures in operating rooms. This permits patient- and surgeon-friendly operations and also maximizes the superiority of laparoscopy over laparotomy. In this study, we compare 2-dimensional (2D) and 3D endoscopy techniques with regard to time, efficiency, optics, and handling by users with different degrees of experience at 4 difficulty levels. DESIGN: A randomized controlled trial on a pelvitrainer in objectively graded surgical steps for students and postgraduates. SETTING: The trials took place at the Kiel School of Gynaecological Endoscopy, a training unit of the Kiel University Department of Obstetrics and Gynecology, a tertiary academic medical center. PARTICIPANTS: The 277 study participants, divided into students, residents, and specialists, worked on pelvitrainers with 2 different optical systems, the 2D full HD and the 3D mode. The following 4 exercises were performed with each optical system: (1) grasping and transferring of pins, (2) cutting predetermined marks, (3) vaginal closure with prevention of prolapse, and (4) sacrocolpopexy. The duration and success of the tasks were measured and compared. A self-assessment questionnaire was completed by the participants. RESULTS: Overall, the 3D-system permitted a greater improvement in working speed, superior optical visualization, and better endoscopic handling in all groups, independent of surgical experience. All students improved in speed (exercises: 1-3) and made significantly fewer mistakes (exercise 2) on 3D compared with 2D. Residents made progress in time (exercises: 1-4) and task performance (exercise 3). Specialists improved significantly in the more challenging tasks 3 and 4. Subjectively, 68.8% of participants preferred 3D for performing laparoscopy. CONCLUSION: Systematic training programs on pelvitrainers can improve endoscopic skills not only in beginners but also in experienced surgeons. The 3D system offered distinct advantages over 2D imaging and was well accepted by surgeons.