Ultradynamic Isoreticularly Expanded Porous Organic Crystals.

Porous organic materials showcasing large framework dynamics present new paths for adsorption and separation with enhanced capacity and selectivity beyond the size-sieving limits, which is attributed to their guest-responsive sorption behaviors. Porous hydrogen-bonded crosslinked organic frameworks (HCOFs) are attractive for their remarkable ability to undergo guest-triggered expansion and contraction facilitated by their flexible covalent crosslinkages. However, the voids of HCOFs remain limited, which restrains the extent of the framework dynamics. In this work, we synthesized a series of HCOFs characterized by unprecedented size expansion capabilities induced by solvents. These HCOFs were constructed by isoreticularly co-crystallizing two complementary sets of hydrogen bonding building blocks to generate porous molecular crystals, which were crosslinked through thiol-ene/yne single-crystal-to-single-crystal transformations. The generated HCOFs exhibit enhanced chemical durability, high crystallinity, and extraordinary framework dynamics. For instance, HCOF-104 crystals featuring a pore diameter of 13.6 Å expanded in DMF to 300 ± 10% of their original lengths within just 1 min. This expansion allows the HCOFs to adsorb guest molecules that are significantly larger than the pore sizes of their crystalline states. Through methanol-induced contraction, these large guests were encapsulated in the fast-contracted HCOFs. These advancements in porous framework dynamics pave the way for new methods of encapsulating guests for targeted delivery.

Open-Cage Copper Complexes Modulate Coordination and Charge Transfer.

This study presents a novel copper-based redox shuttle that employs the PY5 pentadentate polypyridyl ligand in a dye-sensitized solar cell (DSSC). The [Cu(PY5)]2+ complex exhibits a unique five-coordinate square pyramidal geometry, characterized by a strategically labile axial position, to facilitate efficient dye regeneration while minimizing electron recombination, thereby enhancing DSSC performance. Notably, the inclusion of 4-tert-butylpyridine (TBP) as an additive is shown to significantly modulate the electrochemical and photophysical properties of the copper complexes, attributed to its coordination to the vacant axial site. This interaction leads to an improved open-circuit voltage and overall device efficiency, with the complexes achieving promising efficiencies under standard solar irradiance. The findings underscore the potential of utilizing copper-based redox shuttles with designed ligand geometries to overcome the limitations of current DSSC materials, opening new avenues for the design and optimization of solar energy conversion devices. This work not only contributes to the fundamental understanding of the behavior of copper complexes in DSSCs but also paves the way for future research aimed at exploiting the full potential of such geometrical and electronic configurations for the development of more robust and efficient solar energy solutions.

Green Light Promoted Iridium(III)/Copper(I)-Catalyzed Addition of Alkynes to Aziridinoquinoxalines Through the Intermediacy of Azomethine Ylides.

This manuscript describes the development of alkyne addition to the aziridine moiety of aziridinoquinoxalines using dual Ir(III)/Cu(I) catalytic system under green light-emitting diode (LED) photolysis (λmax =525 nm). This mild method features high levels of chemo- and regioselectivity and was used to generate 30 highly functionalized substituted dihydroquinoxalines in 36-98 % yield. This transformation was also carried asymmetrically using phthalazinamine-based chiral ligand to provide 9 chiral addition products in 96 : 4 to 86 : 14 e.r. The experimental and quantum chemical explorations of this reaction suggest a mechanism that involves Ir(III)-catalyzed triplet energy transfer followed by a ring-opening reaction ultimately leading to the formation of azomethine ylide intermediates. These azomethine intermediates undergo sequential protonation/copper(I) acetylide addition to provide the products.

Tripodal Organic Cages with Unconventional CH···O Interactions for Perchlorate Remediation in Water.

Perchlorate anions used in industry are harmful pollutants in groundwater. Therefore, selectively binding perchlorate provides solutions for environmental remediation. Here, we synthesized a series of tripodal organic cages with highly preorganized Csp3-H bonds that exhibit selectively binding to perchlorate in organic solvents and water. These cages demonstrated binding affinities to perchlorate of 105-106 M-1 at room temperature, along with high selectivity over competing anions, such as iodide and nitrate. Through single crystal structure analysis and density functional theory calculations, we identified unconventional Csp3-H···O interactions as the primary driving force for perchlorate binding. Additionally, we successfully incorporated this cage into a 3D-printable polymer network, showcasing its efficacy in removing perchlorate from water.

Molecular Switch Cobalt Redox Shuttle with a Tunable Hexadentate Ligand.

Strong-field hexadentate ligands were synthesized and coordinated to cobalt metal centers to result in three new low-spin to low-spin Co(III/II) redox couples. The ligand backbone has been modified with dimethyl amine groups to result in redox potential tuning of the Co(III/II) redox couples from -200 to -430 mV versus Fc+/0. The redox couples surprisingly undergo a reversible molecular switch rearrangement from five-coordinate Co(II) to six-coordinate Co(III) despite the ligands being hexadentate. The complexes exhibit modestly faster electron self-exchange rate constants of 2.2-4.2 M-1 s-1 compared to the high-spin to low-spin redox couple [Co(bpy)3]3+/2+ at 0.27 M-1 s-1, which is attributed to the change in spin state being somewhat offset by this coordination switching behavior. The complexes were utilized as redox shuttles in dye-sensitized solar cells with the near-IR AP25 + D35 dye system and exhibited improved photocurrents over the [Co(bpy)3]3+/2+ redox shuttle (19.8 vs 18.0 mA/cm2). Future directions point toward pairing the low-spin to low-spin Co(II/III) tunable series to dyes with significantly more negative highest occupied molecular orbital potentials that absorb into the near-IR where outer sphere redox shuttles have failed to produce efficient dye regeneration.

Thiol and H2S-Mediated NO Generation from Nitrate at Copper(II).

Reduction of nitrate is an essential, yet challenging chemical task required to manage this relatively inert oxoanion in the environment and biology. We show that thiols, ubiquitous reductants in biology, convert nitrate to nitric oxide at a Cu(II) center under mild conditions. The ß-diketiminato complex [Cl2NNF6]Cu(κ2-O2NO) engages in O-atom transfer with various thiols (RSH) to form the corresponding copper(II) nitrite [CuII](κ2-O2N) and sulfenic acid (RSOH). The copper(II) nitrite further reacts with RSH to give S-nitrosothiols RSNO and [CuII]2(µ-OH)2 en route to NO formation via [CuII]-SR intermediates. The gasotransmitter H2S also reduces nitrate at copper(II) to generate NO, providing a lens into NO3-/H2S crosstalk. The interaction of thiols with nitrate at copper(II) releases a cascade of N- and S-based signaling molecules in biology.

Ortho-Alkoxy-benzamide Directed Formation of a Single Crystalline Hydrogen-bonded Crosslinked Organic Framework and Its Boron Trifluoride Uptake and Catalysis.

Boron trifluoride (BF3 ) is a highly corrosive gas widely used in industry. Confining BF3 in porous materials ensures safe and convenient handling and prevents its degradation. Hence, it is highly desired to develop porous materials with high adsorption capacity, high stability, and resistance to BF3 corrosion. Herein, we designed and synthesized a Lewis basic single-crystalline hydrogen-bond crosslinked organic framework (HC OF-50) for BF3 storage and its application in catalysis. Specifically, we introduced self-complementary ortho-alkoxy-benzamide hydrogen-bonding moieties to direct the formation of highly organized hydrogen-bonded networks, which were subsequently photo-crosslinked to generate HC OFs. The HC OF-50 features Lewis basic thioether linkages and electron-rich pore surfaces for BF3 uptake. As a result, HC OF-50 shows a record-high 14.2 mmol/g BF3 uptake capacity. The BF3 uptake in HC OF-50 is reversible, leading to the slow release of BF3 . We leveraged this property to reduce the undesirable chain transfer and termination in the cationic polymerization of vinyl ethers. Polymers with higher molecular weights and lower polydispersity were generated compared to those synthesized using BF3 ⋅ Et2 O. The elucidation of the structure-property relationship, as provided by the single-crystal X-ray structures, combined with the high BF3 uptake capacity and controlled sorption, highlights the molecular understanding of framework-guest interactions in addressing contemporary challenges.

Synthesis of Ester-Substituted Indolizines from 2-Propargyloxypyridines and 1,3-Dicarbonyls.

Two new complementary Au(I)-catalyzed methods for the preparation of ester-substituted indolizines from easily accessible 2-propargyloxypyridines and either acetoacetates or dimethyl malonate are reported. These reactions tolerate a wide range of functionality, allowing for diversification at three distinct positions of the product (R, R1, R2). For electron-poor substrates, the highest yields are observed upon reaction with acetoacetates, while neutral and electron-rich substrates give higher yields upon treatment with dimethyl malonate.

Energetic Salts of Sensitive N,N'-(3,5-Dinitropyrazine-2,6-diyl)dinitramide Stabilized through Three-Dimensional Intermolecular Interactions.

N-nitration of 2,6-diamino-3,5-dinitropyrazine (ANPZ) leads to a sensitive energetic compound N,N'-(3,5-dinitropyrazine-2,6-diyl)dinitramide. This nitro(nitroamino) compound was stabilized by synthesizing energetic salts, dipotassium (3,5-dinitropyrazine-2,6-diyl)bis(nitroamide) (3) and diammonium (3,5-dinitropyrazine-2,6-diyl)bis(nitroamide) (4). Compounds 3 and 4 are fully characterized by single-crystal X-ray diffraction. Compound 3 exhibits a three-dimensional energetic metal-organic framework (3D EMOF) structure and an outstanding overall performance by combining high experimental density (2.10 g cm-3), good thermal stability (Td(onset) = 220 °C), and good calculated performance of detonation (D = 8300 m s-1, P = 29.9 GPa). Compound 4 has acceptable thermal stability (155 °C), moderate experimental density (1.73 g cm-3), and good calculated performance of detonation (D = 8624 m s-1, P = 30.8 GPa). The sensitivities of compounds 3 and 4 toward impact and friction were determined following standard methods (BAM). The energetic character of compounds 3 and 4 was determined using red-hot needle and heated plate tests. The results highlight a 3D EMOF (3) based on a six-membered heterocycle as a potential energetic material.

A Crosslinked Ionic Organic Framework for Efficient Iodine and Iodide Remediation in Water.

Iodine is widely used as an antimicrobial reagent for water disinfection in the wilderness and outer space, but residual iodine and iodide need to be removed for health reasons. Currently, it is challenging to remove low concentrations of iodine and iodide in water (≈5 ppm). Furthermore, the remediation of iodine and iodide across a broad temperature range (up to 90 °C) has not previously been investigated. In this work, we report a nitrate dimer-directed synthesis of a single-crystalline ionic hydrogen-bonded crosslinked organic framework (HC OF-7). HC OF-7 removes iodine and iodide species in water efficiently through halogen bonding and anion exchange, reducing the total iodine concentration to 0.22 ppm at room temperature. Packed HC OF-7 columns were employed for iodine/iodide breakthrough experiments between 23 and 90 °C, and large breakthrough volumes were recorded (≥18.3 L g-1 ). The high iodine/iodide removal benchmarks recorded under practical conditions make HC OF-7 a promising adsorbent for water treatment.

One Step Closer to an Ideal Insensitive Energetic Molecule: 3,5-Diamino-6-hydroxy-2-oxide-4-nitropyrimidone and its Derivatives.

Reaching the goal of developing an insensitive high-energy molecule (IHEM) is a major challenge. In this study, 3,5-diamino-6-hydroxy-2-oxide-4-nitropyrimidone (IHEM-1) was synthesized in one step from 2,4,6-triamino-5-nitropyrimidine-1,3-dioxide hydrate (ICM-102 hydrate). The density of compound IHEM-1 is 1.95 g cm-3 with a decomposition temperature of 271 °C. Its detonation velocity and pressure are 8660 m s-1 and 33.64 GPa, respectively, which are far superior to the detonation performance of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), while its sensitivity is identical with that of TATB. In addition, four derivatives (1a, chloride; 1b, nitrate; 1c, perchlorate; and 1d, dinitramide) were prepared on the basis of the weak base site (N-O group) and show excellent energetic properties. By combining a series of advantages, including simple preparation, high yield, high density, very low solubility in aqueous solution, high thermostability, insensitivity, and excellent detonation performance, IHEM-1 approaches an ideal insensitive high-energy molecule. Compounds 1b-1d are also competitive as new high-energy-density materials.

Synthesis, identification, density functional and Hirshfeld surface studies of 2,2'-disulfanediylbis(tetrahydro-4H-cyclopenta[d][1,3,2]dioxaphosphole-2-sulfide).

The new compound 2,2'-disulfanediylbis (tetrahydro-4H-cyclo penta[d][1,3,2]dioxaphosphole 2-sulfide), the dimeric form of 2-mercaptotetrahydro-4H-cyclopenta[d] [1,3,2] dioxaphosphole 2-sulfide, has been synthesized and characterized by elemental analysis, molecular weight determination and spectral data (1 H-NMR, 13 C-NMR, 31 P-NMR, FTIR). The molecular geometry was confirmed by single X-Ray crystallography. The ground state property was examined by PBE0 and B3LYP density functionals using aug-cc-pV(Q+d)Z basis set in the gas phase and in DMSO solution. The preference of PBE0 functional was statistically established. Thermodynamic parameters and standard heat of dissociation reaction ( Δ H R 298 K o ) have been established. The calculated equilibrium constants at different temperatures reflect the stability of the dimer over the monomers at low temperatures and vice versa. Valency and Fukui indices calculations showed that the monomer is more reactive than the dimer. 2D-fingerprint revealed that, while the H…X; [X = H, O and S] nonbonding intermolecular interactions and reciprocals play a crucial role in strengthening of molecules packing in the crystal unit cell while the S…S ones contribute negatively on it.

Selective Synthesis of Bis(3-(3-(trifluoromethyl)-1H-1,2,4-triazol-5-yl)-4,4'-azo- and -azoxyfurazan Derivatives.

In this paper, we report the synthesis of two new derivatives, bis(3-(3-(trifluoromethyl)-1H-1,2,4-triazol-5-yl)-4,4'-azo- and -azoxyfurazans by selective oxidation of 4-(3-(trifluoromethyl)-1H-1,2,4-triazol-5-yl)-1,2,5-oxadiazol-3-amine. Ammonium salts of these derivatives were prepared, and all of them were fully characterized by multinuclear NMR, FTIR spectroscopy, elemental analysis, differential scanning calorimetry (DSC), and single-crystal X-ray diffraction. All of the new compounds have high measured crystal densities, and the energetic properties have been investigated.

Probing Catalyst Function - Electronic Modulation of Chiral Polyborate Anionic Catalysts.

Boroxinate complexes of VAPOL and VANOL are a chiral anionic platform that can serve as a versatile staging arena for asymmetric catalysis. The structural underpinning of the platform is a chiral polyborate core that covalently links together alcohols (or phenols) and vaulted biaryl ligands. The polyborate platform is assembled in situ by the substrate of the reaction, and thus a multiplex of chiral catalysts can be rapidly assembled from various alcohols (or phenols) and bis-phenol ligands for screening of catalyst activity. In the present study, variations in the steric and electronic properties of the phenol/alcohol component of the boroxinate catalyst are probed to reveal their effects on the asymmetric induction in the catalytic asymmetric aziridination reaction. A Hammett study is consistent with a mechanism in which the two substrates are hydrogen-bonded to the boroxinate core in the enantiogenic step. The results of the Hammett study are supported by a computational study in which it is found that the H-O distance of the protonated imine hydrogen bonded to the anionic boroxinate core decreases with an increase in the electron releasing ability of the phenol unit incorporated into the boroxinate. The results are not consistent with a mechanism in which the boroxinate catalyst functions as a Lewis acid and activates the imine by a Lewis acid/Lewis base interaction.

Energetic Tricyclic Polynitropyrazole and Its Salts: Proton-Locking Effect of Guanidium Cations.

An axisymmetric polynitro-pyrazole molecule, 3,5-di(3,5-dinitropyrazol-4-yl)]-4-nitro-1H-pyrazole (5), and its salts (6-12) were prepared and fully characterized. These compounds not only show promising energetic properties but also show a unique tautomeric switch via combining different cations with the axisymmetric compound (5). Its salts (6-9) remain axisymmetric when the cations are potassium, ammonium, or amino-1,2,4-triazolium. However, when the cations are guanidiums, the salts (10-12) dramatically become asymmetric owing to the fixed proton. The introduction of guanidium cations breaks the tautomeric equilibrium by blocking the prototropic transformations and results in the switch-off effect to tautomerism. The structural constraints of 1H NMR and 13C NMR spectra provide strong evidence for the unusual structural constraint phenomenon. These stabilized asymmetric tautomers are very important from the point of molecular recognition, and this research may promote further developments in synthetic and isolation methodologies for novel bioactive pyrazole-based compounds.

A Heteromeric Carboxylic Acid Based Single-Crystalline Crosslinked Organic Framework.

The development of large pore single-crystalline covalently linked organic frameworks is critical in revealing the detailed structure-property relationship with substrates. One emergent approach is to photo-crosslink hydrogen-bonded molecular crystals. Introducing complementary hydrogen-bonded carboxylic acid building blocks is promising to construct large pore networks, but these molecules often form interpenetrated networks or non-porous solids. Herein, we introduced heteromeric carboxylic acid dimers to construct a non-interpenetrated molecular crystal. Crosslinking this crystal precursor with dithiols afforded a large pore single-crystalline hydrogen-bonded crosslinked organic framework HC OF-101. X-ray diffraction analysis revealed HC OF-101 as an interlayer connected hexagonal network, which possesses flexible linkages and large porous channels to host a hydrazone photoswitch. Multicycle Z/E-isomerization of the hydrazone took place reversibly within HC OF-101, showcasing the potential use of HC OF-101 for optical information storage.

The Synthesis of Functionalized 3-Aryl- and 3-Heteroaryloxazolidin-2-ones and Tetrahydro-3-aryl-1,3-oxazin-2-ones via the Iodocyclocarbamation Reaction: Access to Privileged Chemical Structures and Scope and Limitations of the Method.

3-Aryl- and 3-heteroaryloxazolidin-2-ones, by virtue of the diverse pharmacologic activities exhibited by them after subtle changes to their appended substituents, are becoming increasingly important and should be considered privileged chemical structures. The iodocyclocarbamation reaction has been extensively used to make many 3-alkyl-5-(halomethyl)oxazolidin-2-ones, but the corresponding aromatic congeners have been relatively underexplored. We suggest that racemic 3-aryl- and 3-heteroaryl-5-(iodomethyl)oxazolidin-2-ones, readily prepared by the iodocyclocarbamation reaction of N-allylated N-aryl or N-heteroaryl carbamates, may be useful intermediates for the rapid preparation of potential lead compounds with biological activity. We exemplify this point by using this approach to prepare racemic linezolid, an antibacterial agent. Herein, we report the results of our systematic investigation into the scope and limitations of this process and have identified some distinguishing characteristics within the aryl/heteroaryl series. We also describe the first preparation of 3-aryloxazolidin-2-ones bearing new functionalized C-5 substituents derived from conjugated 1,3-dienyl and cumulated 1,2-dienyl carbamate precursors. Finally, we describe the utility of the iodocyclocarbamation reaction for making six-membered tetrahydro-3-aryl-1,3-oxazin-2-ones.

Measurement of the Dissociation of EuII-Containing Cryptates Using Murexide.

The dissociation rates of five EuII-containing cryptates in water were measured using UV-visible spectroscopy and murexide at pH 6.5, 7, 7.5, 8, and 9. Murexide was used as a coordinating dye for EuII. The results for a known cryptate were within experimental error of the value obtained using other methods and enabled the measurement of other cryptates. This validation of the use of murexide to study the dissociation of EuII-containing cryptates enables its use with other complexes of EuII.

A Duo and a Trio of Triazoles as Very Thermostable and Insensitive Energetic Materials.

The triazole moiety with a high heat of formation and a high nitrogen content has been investigated for decades in combination with other nitrogen-rich heterocyclic rings in the field of energetic materials. A novel strategy for the construction of both thermally stable and mechanically insensitive energetic materials using a multi-aminotriazole system is now described. Using this methodology, two series of energetic materials were created on the basis of a duo of triazoles, 5-amino-3-(3,4-diamino-1,2,4-triazol-5-yl)-1H-1,2,4-triazole (TT), and a trio of triazoles, 4,5-di(3,4-diamino-1,2,4-triazol-5-yl)-2H-1,2,3-triazole (TTT). Their nitrogen-rich salts were also synthesized. Compound TT exhibits an excellent onset decomposition temperature (Td = 341 °C), which is superior to that of the conventional heat-resistant explosive hexanitrostilbene (HNS) (Td = 318 °C). The nitrogen-rich salt 4,5-di(3,4-diamino-1,2,4-triazol-5-yl)-2H-1,2,3-triazolium 3,4,5-trinitropyrazol-1-ide (TTT-1) exhibits both remarkable detonation properties and low sensitivities (Dv = 8715 m s-1; P = 32.6 GPa; IS > 40 J; FS > 360 N), which are superior to those of the traditional explosive LLM-105 (Dv = 8639 m s-1; P = 31.7 GPa; IS = 20 J; FS = 360 N). Therefore, this methodology of building a multi-aminotriazole system could effectively assist in the design of thermally stable and mechanically insensitive energetic materials in future exploration.

Structure and Chemical Analysis of Major Specialized Metabolites Produced by the Lichen Evernia prunastri.

We performed comparative profiling of four specialized metabolites in the lichen Evernia prunastri, collected at three different geographic locations, California and Maine, USA, and Yoshkar Ola, Mari El, Russia. Among the compounds produced at high concentrations that were identified in all three specimens, evernic acid, usnic acid, lecanoric acid and chloroatranorin, evernic acid was the most abundant. Two depsidones, salazinic acid and physodic acid, were detected in the Yoshkar-Ola collection only. The crystalline structure of evernic acid (2-hydroxy-4-[(2-hydroxy-4-methoxy-6-methylbenzoyl)oxy]-6-methylbenzoate) (hmb) revealed two crystallographically and conformationally distinct hmb anions, along with two monovalent sodium atoms. One hmb moiety contained an exotetradentate binding mode to sodium, whereas the other exhibited an exohexadentate binding mode to sodium. Embedded edge-sharing {Na2 O8 }n sodium-oxygen chains connected the hmb anions into the full three-dimensional crystal structure of the title compound. The crystal used for single-crystal X-ray diffraction exhibited non-merohedral twinning. The data suggest the importance of the acetyl-polymalonyl pathway products to processes of maintaining integrity of the lichen holobiont community.