RESUMEN
Advances on understanding the nature of the chemical bonding and electron correlation effects during the X-ray absorption process in ionic-covalent metal complexes has been achieved for most of the transition elements, except for scandium, due to the lack of a systematic series of spectroscopic reference spectra and the shortage of standard crystallographic data on scandium compounds. To close the gap, the chemical bonding effects in eight Sc compounds are studied using X-ray absorption spectroscopy (XAS) at Sc K and L2,3 absorption edges and X-ray photoelectron spectroscopy (XPS). Indeed, the fine structure of the XAS Sc K edge reflects the chemical sp3-like bond formed between scandium and the ligand while the L2,3 edge and the pre-edge features of the K-edge provide a direct insight into the crystal field parameters at the Sc site in the coordination compound. The XPS data provide the information on binding energies of the core electrons involved in the electron transitions caused by the absorption of high energy X-rays. XAS and XPS complement each other by accessing the information on Sc structure on bulk and the surface. Herein, comprehensive information on the electronic structure of well-known crystalline materials based on Sc is given with spectroscopic fingerprints X-ray data. This will help to predict the formation of chemical bonds in the unknown components via the systematic evaluation of the available spectroscopic fingerprints.
RESUMEN
Arsenic (As) is a toxic element, and elevated levels of geogenic As in drinking water pose a threat to the health of several hundred million people worldwide. In this study, we used microfluidics in combination with optical microscopy and X-ray spectroscopy to investigate zerovalent iron (ZVI) corrosion, secondary iron (Fe) phase formation, and As retention processes at the pore scale in ZVI-based water treatment filters. Two 250 µm thick microchannels filled with single ZVI and quartz grain layers were operated intermittently (12 h flow/12 h no-flow) with synthetic groundwater (pH 7.5; 570 µg/L As(III)) over 13 and 49 days. Initially, lepidocrocite (Lp) and carbonate green rust (GRC) were the dominant secondary Fe-phases and underwent cyclic transformation. During no-flow, lepidocrocite partially transformed into GRC and small fractions of magnetite, kinetically limited by Fe(II) diffusion or by decreasing corrosion rates. When flow resumed, GRC rapidly and nearly completely transformed back into lepidocrocite. Longer filter operation combined with a prolonged no-flow period accelerated magnetite formation. Phosphate adsorption onto Fe-phases allowed for downstream calcium carbonate precipitation and, consequently, accelerated anoxic ZVI corrosion. Arsenic was retained on Fe-coated quartz grains and in zones of cyclic Lp-GRC transformation. Our results suggest that intermittent filter operation leads to denser secondary Fe-solids and thereby ensures prolonged filter performance.
Asunto(s)
Arsénico , Agua Potable , Contaminantes Químicos del Agua , Purificación del Agua , Arsénico/química , Carbonato de Calcio , Compuestos Férricos , Óxido Ferrosoférrico/química , Humanos , Hierro/química , Microfluídica , Fosfatos , Cuarzo , Contaminantes Químicos del Agua/químicaRESUMEN
The chemical and electronic structures of 15 different sulfates are studied using S L2,3 soft X-ray emission spectroscopy (XES). Sulfur L2,3 XES spectra of sulfates are distinctively different from those of other sulfur compounds, which makes XES a powerful technique for sulfate detection. Furthermore, subtle but distinct differences between the spectra of sulfates with different cations are observed, which allow a further differentiation of the specific compound. Most prominently, the position and width of the emission from "S 3s" derived bands systematically vary for different compounds, which can be understood with electronic structure and spectral calculations based on density functional theory.
Asunto(s)
Sulfatos , Óxidos de Azufre , Espectrometría por Rayos X , AzufreRESUMEN
X-SPEC is a high-flux spectroscopy beamline at the KIT (Karlsruhe Institute of Technology) Synchrotron for electron and X-ray spectroscopy featuring a wide photon energy range. The beamline is equipped with a permanent magnet undulator with two magnetic structures of different period lengths, a focusing variable-line-space plane-grating monochromator, a double-crystal monochromator and three Kirkpatrick-Baez mirror pairs. By selectively moving these elements in or out of the beam, X-SPEC is capable of covering an energy range from 70â eV up to 15â keV. The flux of the beamline is maximized by optimizing the magnetic design of the undulator, minimizing the number of optical elements and optimizing their parameters. The beam can be focused into two experimental stations while maintaining the same spot position throughout the entire energy range. The first experimental station is optimized for measuring solid samples under ultra-high-vacuum conditions, while the second experimental station allows in situ and operando studies under ambient conditions. Measurement techniques include X-ray absorption spectroscopy (XAS), extended X-ray absorption fine structure (EXAFS), photoelectron spectroscopy (PES) and hard X-ray PES (HAXPES), as well as X-ray emission spectroscopy (XES) and resonant inelastic X-ray scattering (RIXS).
RESUMEN
Chromium contamination is a serious environmental issue in areas affected by leather tanning and metal plating, and green rust sulfate has been tested extensively as a potential material for in situ chemical reduction of hexavalent chromium in groundwater. Reported products and mechanisms for the reaction have varied, most likely because of green rust's layered structure, as reduction at outer and interlayer surfaces might produce different reaction products with variable stabilities. Based on studies of Cr(III) oxidation by biogenic Mn (IV) oxides, Cr mobility in oxic soils is controlled by the solubility of the Cr(III)-bearing phase. Therefore, careful engineering of green rust properties, i.e., crystal/particle size, morphology, structure, and electron availability, is essential for its optimization as a remediation reagent. In the present study, pure green rust sulfate and green rust sulfate with Al, Mg and Zn substitutions were synthesized and reacted with identical chromate (CrO42-) solutions. The reaction products were characterized by X-ray diffraction, pair distribution function analysis, X-ray absorption spectroscopy and transmission electron microscopy and treated with synthetic δ-MnO2 to assess how easily Cr(III) in the products could be oxidized. It was found that Mg substitution had the most beneficial effect on Cr lability in the product. Less than 2.5% of the Cr(III) present in the reacted Mg-GR was reoxidized by δ-MnO2 within 14 days, and the particle structure and Cr speciation observed during X-ray scattering and absorption analyses of this product suggested that Cr(VI) was reduced in its interlayer. Reduction in the interlayer lead to the linkage of newly-formed Cr(III) to hydroxyl groups in the adjacent octahedral layers, which resulted in increased structural coherency between these layers, distinctive rim domains, sequestration of Cr(III) in insoluble Fe oxide bonding environments resistant to reoxidation and partial transformation to Cr(III)-substituted feroxyhyte. Based on the results of this study of hexavalent chromium reduction by green rust sulfate and other studies, further improvements can also be made to this remediation technique by reacting chromate with a large excess of green rust sulfate, which provides excess Fe(II) that can catalyze transformation to more crystalline iron oxides, and synthesis of the reactant under alkaline conditions, which has been shown to favor chromium reduction in the interlayer of Fe(II)-bearing phyllosilicates.
RESUMEN
The phase purity of a series of ZnAl4(OH)12SO4· nH2O layered double hydroxides (ZnAl4-LDH) obtained from a reaction of bayerite (Al(OH)3) with an excess of zinc(II) sulfate under hydrothermal conditions was investigated as a function of the reaction temperature, the duration of the hydrothermal treatment, and the zinc(II) concentration. The product quality, i.e., crystalline impurities, Al impurities, and bulk Zn:Al ratio, were assessed by powder X-ray diffraction (PXRD), 27Al MAS NMR, and elemental analysis. Structural characterization of a stoichiometric ZnAl4-LDH (120 °C, 9 days, and 2.8 M Zn(II)) showed a well-defined structure of the metal ion layer as evidenced by a single, well-defined Zn environment: i.e., no Zn substitution on the Al sites according to Zn k-edge EXAFS and PXRD. Furthermore, nearly all of the 12 different 1H atoms in the -OH groups and 4 27Al resonances could be assigned using 1H,27Al NMR correlation experiments recorded with ultrafast MAS. The interlayer water content is variable on the basis of thermogravimetric analysis and changes in the 1H MAS NMR spectra with temperature. A composition of ZnAl4(OH)12(SO4)·2.6H2O was obtained from a combination of these techniques and confirmed that ZnAl4-LDH is isostructural with the mineral nickelalumite (NiAl4(OH)12SO4·3H2O).
RESUMEN
The development of iridium-free, yet efficient emitters with thermally activated delayed fluorescence (TADF) was an important step towards mass production of organic light-emitting diodes (OLEDs). Progress is currently impeded by the low solubility and low chemical stability of the materials. Herein, we present a CuI -based TADF emitter that is sufficiently chemically stable under ambient conditions and can be processed by printing techniques. The solubility is drastically enhanced (to 100â g L-1 ) in relevant printing solvents. The integrity of the complex is preserved in solution, as was demonstrated by X-ray absorption spectroscopy and other techniques. In addition, it was found that the optoelectronic properties are not affected even when partly processing under ambient conditions. As a highlight, we present a TADF-based OLED device that reached an efficiency of 11±2 % external quantum efficiency (EQE).
RESUMEN
We investigated the speciation and extractability of Tl in soil developed from mineralized carbonate rock. Total Tl concentrations in topsoil (0-20 cm) of 100-1000 mg/kg are observed in the most affected area, subsoil concentrations of up to 6000 mg/kg Tl in soil horizons containing weathered ore fragments. Using synchrotron-based microfocused X-ray fluorescence spectrometry (µ-XRF) and X-ray absorption spectroscopy (µ-XAS) at the Tl L3-edge, partly Tl(I)-substituted jarosite and avicennite (Tl2O3) were identified as Tl-bearing secondary minerals formed by the weathering of a Tl-As-Fe-sulfide mineralization hosted in the carbonate rock from which the soil developed. Further evidence was found for the sequestration of Tl(III) into Mn-oxides and the uptake of Tl(I) by illite. Quantification of the fractions of Tl(III), Tl(I)-jarosite and Tl(I)-illite in bulk samples based on XAS indicated that Tl(I) uptake by illite was the dominant retention mechanism in topsoil materials. Oxidative Tl(III)uptake into Mn-oxides was less relevant, probably because the Tl loadings of the soil exceeded the capacity of this uptake mechanism. The concentrations of Tl in 10 mM CaCl2-extracts increased with increasing soil Tl contents and decreasing soil pH, but did not exhibit drastic variations as a function of Tl speciation. With respect to Tl in contaminated soils, this study provides first direct spectroscopic evidence for Tl(I) uptake by illite and indicates the need for further studies on the sorption of Tl to clay minerals and Mn-oxides and its impact on Tl solubility in soils.
Asunto(s)
Arsénico/análisis , Carbonatos/análisis , Sedimentos Geológicos/química , Minerales/química , Contaminantes del Suelo/análisis , Suelo/química , Talio/análisis , Ácidos/química , Contaminación Ambiental/análisis , Compuestos Férricos/química , Concentración de Iones de Hidrógeno , Oxalatos/química , Espectrometría por Rayos X , Sulfatos/química , Suiza , Espectroscopía de Absorción de Rayos XRESUMEN
The advantage of the new generation IV iron preparations ferric carboxymaltose (FCM), ferumoxytol (FMX), and iron isomaltoside 1000 (IIM) is that they can be administered in relatively high doses in a short period of time. We investigated the physico-chemical properties of these preparations and compared them with those of the older preparations iron sucrose (IS), sodium ferric gluconate (SFG), and low molecular weight iron dextran (LMWID). Mössbauer spectroscopy, X-ray diffraction, and Fe K-edge X-ray absorption near edge structure spectroscopy indicated akaganeite structures (ß-FeOOH) for the cores of FCM, IIM and IS, and a maghemite (γ-Fe2O3) structure for that of FMX. Nuclear magnetic resonance studies confirmed the structure of the carbohydrate of FMX as a reduced, carboxymethylated, low molecular weight dextran, and that of IIM as a reduced Dextran 1000. Polarography yielded significantly different fingerprints of the investigated compounds. Reductive degradation kinetics of FMX was faster than that of FCM and IIM, which is in contrast to the high stability of FMX towards acid degradation. The labile iron content, i.e. the amount of iron that is only weakly bound in the polynuclear iron core, was assessed by a qualitative test that confirmed decreasing labile iron contents in the order SFG ≈ IS > LMWID ≥ FMX ≈ IIM ≈ FCM. The presented data are a step forward in the characterization of these non-biological complex drugs, which is a prerequisite to understand their cellular uptake mechanisms and the relationship between the structure and physiological safety as well as efficacy of these complexes.
Asunto(s)
Disacáridos/química , Compuestos Férricos/química , Óxido Ferrosoférrico/química , Compuestos de Hierro/química , Maltosa/análogos & derivados , Química Física , Disacáridos/síntesis química , Compuestos Férricos/síntesis química , Óxido Ferrosoférrico/síntesis química , Compuestos de Hierro/síntesis química , Maltosa/síntesis química , Maltosa/química , Difracción de Rayos XRESUMEN
Luminescent Cu(I) complexes are interesting candidates as dopants in organic light-emitting diodes (OLEDs). However, open questions remain regarding the stability of such complexes in solution and therefore their suitability for solution processing. Since the emission behavior of Cu(I) emitters often drastically differs between bulk and thin film samples, it cannot be excluded that changes such as partial decomposition or formation of alternative emitting compounds upon processing are responsible. In this study, we present three particularly interesting candidates of the recently established copper-halide-(diphenylphosphino)pyridine derivatives (PyrPHOS) family that do not show such changes. We compare single crystals, amorphous bulk samples, and neat thin films in order to verify whether the material remains stable upon processing. Solid-state nuclear magnetic resonance (MAS (31)P NMR) was used to investigate the electronic environment of the phosphorus atoms, and X-ray absorption spectroscopy at the Cu K edge provides insight into the local electronic and geometrical environment of the copper(I) metal centers of the samples. Our results suggest that--unlike other copper(I) complexes--the copper-halide-PyrPHOS clusters are significantly more stable upon processing and retain their initial structure upon quick precipitation as well as thin film processing.
Asunto(s)
Cobre/química , Piridinas/química , Espectroscopía de Resonancia Magnética , Soluciones , Espectroscopía de Absorción de Rayos XRESUMEN
Hematite (α-Fe2O3) is one of the most common iron oxides and a sink for the toxic metalloid arsenic. Arsenic can be immobilized by adsorption to the hematite surface; however, the incorporation of As in hematite was never seriously considered. In our study we present evidence that, besides adsorption, the incorporation of As into the hematite crystals can be of great relevance for As immobilization. With the coupling of nanoresolution techniques and X-ray absorption spectroscopy the presence of As (up to 1.9 wt %) within the hematite crystals could be demonstrated. The incorporated As(5+) displays a short-range order similar to angelellite-like clusters, epitaxially intergrown with hematite. Angelellite (Fe4As2O11), a triclinic iron arsenate with structural relations to hematite, can epitaxially intergrow along the (210) plane with the (0001) plane of hematite. This structural composite of hematite and angelellite-like clusters represents a new immobilization mechanism and potentially long-lasting storage facility for As(5+) by iron oxides.
Asunto(s)
Arsénico/química , Contaminantes Ambientales/química , Compuestos Férricos/química , Microscopía Electrónica de Transmisión , Espectroscopía de Absorción de Rayos XRESUMEN
Growing concern over mineral resources supply forces us to search for alternative sources of Phosphorus. The possibility to recover phosphorus from incinerated sewage sludge ashes appears to be an important aspect in anthropogenic phosphorus cycle and sustainable economy. To make phosphorus recovery efficient it is important to learn the chemical and mineral composition of ash and phosphorus speciation. The phosphorus content in the ash was over 7%, what corresponds to medium rich phosphorus ores. The main phosphorus rich mineral phases were phosphate minerals. The most widespread was tri-calcium phosphate Whitlockite with various Fe, Mg and Ca proportions. In minority Fe-PO4 and Mg-PO4 were detected. Whitlockite commonly overgrown with hematite, influences negatively mineral solubility and thus recovery potential and indicates low bioavailability of phosphorus. Considerable amount of phosphorus was found in the low crystalline matrix where phosphorus content was around 10 wt% however low crystallinity and dispersed phosphorus also does not strengthen the potential to recover this element.
RESUMEN
The sulfur L2,3 X-ray emission spectra of the alkaline earth metal sulfides BeS, MgS, CaS, SrS, and BaS are investigated and compared with spectra calculations based on density functional theory. Very distinct spectral shapes are found for the different compounds. With decreasing electronegativity of the cation, that is, increasing ionic bonding character, the upper valence band width and its relative spectral intensity decrease. These general trends are qualitatively reproduced by the spectra calculations, which give quite an accurate description of the spectral shapes in the upper valence band region. On the low energy side of the sulfur 3s â 2p transition dominating the spectra, we find strong satellites caused by "semi-Auger" decays involving configuration interaction. These satellites, previously believed to be energetically forbidden for sulfur L2,3 emission and only observed for the L2,3 emission of Cl to Cr, increase in intensity as the bonding character becomes more ionic and dominate the spectra for SrS and BaS. The intensities, energies, and widths of the satellites vary strongly between the investigated compounds, giving a very specific spectral fingerprint that can be used for speciation analysis.
RESUMEN
We report on the chemical structure of Cu(In,Ga)Se2 (CIGSe) thin-film solar cell absorber surfaces and their interface with a sputter-deposited Ga2O3 buffer. The CIGSe samples were exposed to a RbF postdeposition treatment and an ammonia-based rinsing step, as used in corresponding thin-film solar cells. For a detailed chemical analysis of the impact of these treatments, we employed laboratory-based X-ray photoelectron spectroscopy, X-ray-excited Auger electron spectroscopy, and synchrotron-based hard X-ray photoelectron spectroscopy. On the RbF-treated surface, we find both Rb and F, which are then partly (Rb) and completely (F) removed by the rinse. The rinse also removes Ga-F, Ga-O, and In-O surface bonds and reduces the Ga/(Ga + In) ratio at the CIGSe absorber surface. After Ga2O3 deposition, we identify the formation of In oxides and the diffusion of Rb and small amounts of F into/onto the Ga2O3 buffer layer but no indication of the formation of hydroxides.
RESUMEN
A highly specific accumulation of the toxic element lead was recently measured in the transition zone between non-calcified and calcified normal human articular cartilage. This transition zone, the so-called `tidemark', is considered to be an active calcification front of great clinical importance. However, little is known about the mechanisms of accumulation and the chemical form of Pb in calcified cartilage and bone. Using spatially resolved X-ray absorption near-edge structure analysis (µ-XANES) at the Pb L(3)-edge, the chemical state of Pb in the osteochondral region was investigated. The feasibility of the µ-XANES set-up at the SUL-X beamline (ANKA synchrotron light source) was tested and confirmed by comparing XANES spectra of bulk Pb-reference compounds recorded at both the XAS and the SUL-X beamline at ANKA. The µ-XANES set-up was then used to investigate the tidemark region of human bone (two patella samples and one femoral head sample). The spectra recorded at the tidemark and at the trabecular bone were found to be highly correlated with the spectra of synthetic Pb-doped carbonated hydroxyapatite, suggesting that in both of these very different tissues Pb is incorporated into the hydroxyapatite structure.
Asunto(s)
Cartílago Articular/química , Plomo/metabolismo , Espectroscopía de Absorción de Rayos X/métodos , Cabeza Femoral/química , Humanos , Plomo/química , Rótula/químicaRESUMEN
A high-repetition-rate pump-probe experiment is presented, based on the asynchronous sampling approach. The low-α mode at the synchrotron ANKA can be used for a time resolution down to the picosecond limit for the time-domain sampling of the coherent THz emission as well as for hard X-ray pump-probe experiments, which probe structural dynamics in the condensed phase. It is shown that a synchronization of better than 1 ps is achieved, and examples of phonon dynamics of semiconductors are presented.
RESUMEN
The electronic structures of four precursors for organic-inorganic hybrid perovskites, namely, methylammonium chloride and iodide, as well as formamidinium bromide and iodide, are investigated by X-ray emission (XE) spectroscopy at the carbon and nitrogen K-edges. The XE spectra are analyzed based on density functional theory calculations. We simulate the XE spectra at the Kohn-Sham level for ground-state geometries and carry out detailed analyses of the molecular orbitals and the electronic density of states to give a thorough understanding of the spectra. Major parts of the spectra can be described by the model of the corresponding isolated organic cation, whereas high-emission energy peaks in the nitrogen K-edge XE spectra arise from electronic transitions involving hybrids of the molecular and atomic orbitals of the cations and halides, respectively. We find that the interaction of the methylammonium cation is stronger with the chlorine than with the iodine anion. Furthermore, our detailed theoretical analysis highlights the strong influence of ultrafast proton dynamics in the core-excited states, which is an intrinsic effect of the XE process. The inclusion of this effect is necessary for an accurate description of the experimental nitrogen K-edge X-ray emission spectra and gives information on the hydrogen-bonding strengths in the different precursor materials.
RESUMEN
2D/3D perovskite heterostructures have emerged as a promising material composition to reduce nonradiative recombination in perovskite-based LEDs and solar cells. Such heterostructures can be created by a surface treatment with large organic cations, for example, n-butylammonium bromide (BABr). To understand the impact of the BABr surface treatment on the double-cation (Cs0.17FA0.83Pb(I0.6Br0.4)3) (FA = formamidinium) perovskite thin film and further optimize the corresponding structures, an in-depth understanding of the chemical and electronic properties of the involved surfaces, interfaces, and bulk is required. Hence, we study the impact of the BABr treatment with a combination of surface-sensitive X-ray photoelectron spectroscopy and bulk-sensitive resonant inelastic soft X-ray scattering (RIXS). A quantitative analysis of the BABr-treated perovskite thin film shows a modified chemical perovskite surface environment of carbon, nitrogen, bromine, iodine, and lead, indicating that the treatment leads to a perovskite surface with a modified composition and bonding structure. With K-edge RIXS, the local environment at the nitrogen and carbon atoms is probed, allowing us to identify the presence of BABr in the perovskite bulk albeit with a modified bonding environment. This, in turn, identifies a "hidden parameter" for the optimization of the BABr treatment and overall performance of 2D/3D perovskite solar cell absorbers.
RESUMEN
Thermoresistive catalytic combustion sensors based on noble metals are very stable stable and highly sensitive devices to monitor potentially explosive atmospheres. We studied and proved the high stability of rhodium oxide-based sensors under working conditions in different CH4/air mixtures (up to 3.5 vol % methane) with the help of operando X-ray-based characterization techniques, DC resistance measurements, and IR thermography using a specially designed in situ cell. Operando X-ray diffraction and X-ray absorption spectroscopy showed that the active Rh species are in the oxidized state and their chemical state is preserved during operation under realistic conditions. The resistance correlated with the surface temperature of the pellistor and is related to the combustion of CH4, confirming the catalytic nature of the observed sensing process. Only under harsh operation conditions such as an oxygen-free atmosphere or enhanced working current, a reduction in the active Rh2O3 phase was observed. Finally, the effect of poisoning causing the lowered activity on the catalytic combustion of methane was investigated. While stable rhodium sulfate might form in a sulfur-poisoned pellistor, silicon dioxide seems to additionally physically block the pores in the alumina ceramics of the pellistor poisoned by hexamethyldisiloxane.
Asunto(s)
Óxidos , Rodio , Catálisis , Espectroscopía de Absorción de Rayos X , Difracción de Rayos XRESUMEN
Wildfires can be responsible for significant mercury (Hg) emissions especially in contaminated areas. Here, we investigated the Hg distribution in topsoils and vegetation samples and temperature-dependent Hg mobilization from biomass-rich topsoils collected near a copper (Cu) smelter in Tsumeb (semi-arid Namibia), where Hg-rich Cu concentrates are processed. The thermo-desorption (TD) experiments conducted on representative biomass-rich topsoils (3.9-7.7 mg Hg/kg) indicated that more than 91% of the Hg was released at â¼340 °C, which corresponds to the predominant grassland-fire conditions. The mineralogical investigation indicated that the Hg comes mainly from the deposited smelter emissions because no distinct Hg-rich microparticles corresponding to the windblown dust from the nearby disposal sites of the technological materials (concentrates, slags, tailings) were found. A comparison with the TD curves of the Hg reference compounds confirmed that the Hg in the biomass-rich topsoils occurs as a mixture of Hg bound to the organic matter and metacinnabar (black HgS), which exhibits similarities with the TD pattern of smelter flue dust residue. Despite the installation of a sulfuric acid plant in the smelter in 2015 and a calculated drop in the estimated Hg emissions (from 1301 ± 457 kg/y for the period 2004-2015 to 67 ± 5 kg/y after 2015), the Hg legacy pool in the smelter surroundings can potentially be re-emitted back to the atmosphere by wildfire. Using the Hg spatial distribution data in the area (184 km2), the estimates indicate that up to 303 kg and 1.3 kg can be remobilized from the topsoils and vegetation, respectively.