Predictive Molecular Design and Structure-Property Validation of Novel Terpene-Based, Sustainably Sourced Bacterial Biofilm-Resistant Materials.

Presented in this work is the use of a molecular descriptor, termed the α parameter, to aid in the design of a series of novel, terpene-based, and sustainable polymers that were resistant to biofilm formation by the model bacterial pathogen Pseudomonas aeruginosa. To achieve this, the potential of a range of recently reported, terpene-derived monomers to deliver biofilm resistance when polymerized was both predicted and ranked by the application of the α parameter to key features in their molecular structures. These monomers were derived from commercially available terpenes (i.e., α-pinene, ß-pinene, and carvone), and the prediction of the biofilm resistance properties of the resultant novel (meth)acrylate polymers was confirmed using a combination of high-throughput polymerization screening (in a microarray format) and in vitro testing. Furthermore, monomers, which both exhibited the highest predicted biofilm anti-biofilm behavior and required less than two synthetic stages to be generated, were scaled-up and successfully printed using an inkjet "valve-based" 3D printer. Also, these materials were used to produce polymeric surfactants that were successfully used in microfluidic processing to create microparticles that possessed bio-instructive surfaces. As part of the up-scaling process, a novel rearrangement was observed in a proposed single-step synthesis of α-terpinyl methacrylate via methacryloxylation, which resulted in isolation of an isobornyl-bornyl methacrylate monomer mixture, and the resultant copolymer was also shown to be bacterial attachment-resistant. As there has been great interest in the current literature upon the adoption of these novel terpene-based polymers as green replacements for petrochemical-derived plastics, these observations have significant potential to produce new bio-resistant coatings, packaging materials, fibers, medical devices, etc.

Comparative Hydrodynamic Study on Non-Aqueous Soluble Archaeological Wood Consolidants: Butvar B-98 and PDMS-OH Siloxanes.

Butvar B-98 and PDMS-OH both have a demonstrable ability as consolidants for archaeological wood. This makes them both potential treatment options for the Oseberg collection, which is one of the most important archaeological finds from the Viking era. Both Butvar B-98 and PDMS-OH are soluble in organic solvents, offering a useful alternative to aqueous-based consolidants. Extensive characterisation studies were carried out on both of these polymers, with the use of analytical ultracentrifugation and viscometry, for the benefit of conservators wanting to know more about the physical properties of these materials. Short column sedimentation equilibrium analysis using SEDFIT-MSTAR revealed a weight-average molar mass (weight-average molecular weight) Mw of (54.0 ± 1.5) kDa (kg · mol-1) for Butvar B-98, while four samples of PDMS-OH siloxanes (each with a different molar mass) had an Mw of (52.5 ± 3.0) kDa, (38.8 ± 1.5) kDa, (6.2 ± 0.7) kDa and (1.6 ± 0.1) kDa. Sedimentation velocity confirmed that all polymers were heterogeneous, with a wide range of molar masses. All molecular species showed considerable conformational asymmetry from measurements of intrinsic viscosity, which would facilitate networking interactions as consolidants. It is anticipated that the accumulated data on these two consolidants will enable conservators to make a more informed decision when it comes to choosing which treatment to administer to archaeological artefacts.

Iridoid Sex Pheromone Biosynthesis in Aphids Mimics Iridoid-Producing Plants.

Biosynthesis of (1R,4aS,7S,7aR)-nepetalactol (1) and (4aS,7S,7aR)-nepetalactone (2) in plants involves iridoid synthase (ISY), an atypical reductive cyclase that catalyses the reduction of 8-oxogeranial into the reactive enol of (S)-8-oxocitronellal, and cyclization of this enol intermediate, either non-enzymatically or by a nepetalactol-related short chain dehydrogenase enzyme (NEPS) that yields the nepetalactols. In this study, we investigated the biosynthesis in vivo of 1 and 2 in the pea aphid, Acyrthosiphon pisum, using a library of isotopically-labelled monoterpenoids as molecular probes. Topical application of deuterium-labelled probes synthesized from geraniol and nerol resulted in production of 2 H4 -lactol 1 and 2 H4 -lactone 2. However, deuterium incorporation was not evident using labelled probes synthesized from (S)-citronellol. These results suggest that iridoid biosynthesis in animals, specifically aphids, may follow a broadly similar route to that characterised for plants.

Tert-butyldimethylsilyl chitosan synthesis and characterization by analytical ultracentrifugation, for archaeological wood conservation.

The Oseberg ship is one of the most important archaeological testimonies of the Vikings. After excavation in 1904, the wooden gravegoods were conserved using alum salts. This resulted in extreme degradation of a number of the objects a hundred years later through acid depolymerisation of cellulose and lignin. The fragile condition of the artefacts requires a reconsolidation which has to be done avoiding water as solvent. We synthesized tert-butyldimethylsilyl (TBDMS) chitosan which is soluble in a 50:50 solution of ethyl acetate and toluene. Measurement of its molecular weight, to anticipate its penetration, provided a challenge as the density difference of the polymer and solvent was too small to provide adequate solute redistribution under a centrifugal field, so a two-stage process was implemented (i) determination of the weight-average molar mass of the aqueous soluble activated precursor, chitosan mesylate, Mw,mc using sedimentation equilibrium with the SEDFIT-MSTAR algorithm, and determination of the degree of polymerisation DP; (ii) measurement of the average degree of substitution DSTBDMS of the TBDMS group on each chitosan monosaccharide monomer unit using NMR, to augment the Mw,mc value to give the molar mass of the TBDMS-chitosan. For the preparation, we find Mw = 9.8 kg·mol-1, which is within the acceptable limit for penetration and consolidation of degraded wood. Future work will test this on archaeological wood from different sources.

Synthetic approaches and applications of sulfonimidates.

This review article explores the synthesis of the organosulfur(vi) species named sulfonimidates, focusing on their synthesis from sulfur(ii), sulfur(iv) and sulfur(vi) reagents, and investigates their recent resurgeance in interest as intermediates to access other important organosulfur compounds. Sulfonimidates have been utilized as precursors for polymers, sulfoximine and sulfonimidamide drug candidates and as alkyl transfer reagents.

Asymmetric Synthesis of Pyrrolidine-Containing Chemical Scaffolds via Tsuji-Trost Allylation of N-tert-Butanesulfinyl Imines.

A simple and efficient asymmetric synthesis of novel sp3 -rich pyrrolidine chemical scaffolds over five steps starting from simple ketones is described. Key steps involve the use of tert-butanesulfinamide as a chiral auxiliary to perform an asymmetric Tsuji-Trost allylation, with subsequent cross-metathesis with an acrylate ester and reduction of the sulfinimine/cyclisation of the resulting amine giving the pyrrolidine scaffolds in high yields and diastereoselectivites. By removing the chiral auxiliary and functionalising the ester group, the resulting scaffold core can be further derivatised.

Expedient synthesis of an atypical oxazolidinone compound library.

In order to address the current downturn in the drug discovery pipeline, initiatives are being undertaken to synthesise screening libraries of sp3-rich, low molecular weight compounds. As part of the European Lead Factory initiative, the synthesis and derivatisation of a simple hexahydrooxazolo[5,4-c]pyridin-2(1H)-one bicyclic carbamate has been achieved. The synthetic route employed involved a telescoped hetero-Diels-Alder/[2,3]-sigmatropic rearrangement/cyclisation sequence to deliver the desired core scaffold containing two points for further diversification. When applied, this synthesis was found to be robust and scalable which allowed the production of a 155 compound library.

Versatile C(sp(2) )-C(sp(3) ) Ligand Couplings of Sulfoxides for the Enantioselective Synthesis of Diarylalkanes.

The reaction of chiral (hetero)aryl benzyl sulfoxides with Grignard reagents affords enantiomerically pure diarylalkanes in up to 98 % yield and greater than 99.5 % enantiomeric excess. This ligand coupling reaction is tolerant to multiple substitution patterns and provides access to diverse areas of chemical space in three operationally simple steps from commercially available reagents. This strategy provides orthogonal access to electron-deficient heteroaromatic compounds, which are traditionally synthesized by transition metal catalyzed cross-couplings, and circumvents common issues associated with proto-demetalation and ß-hydride elimination.

Sigmatropic Rearrangement of Vinyl Aziridines: Expedient Synthesis of Cyclic Sulfoximines from Chiral Sulfinimines.

A novel rearrangement of 2-vinyl aziridine 2-carboxylates to unusual chiral cyclic sulfoximines is described herein. The method allows the synthesis of substituted cyclic sulfoximines in high yields with complete stereocontrol, and tolerates a wide substrate scope. A one-pot process starting directly from sulfinimines provides access to complex chiral sulfoximines in only two steps from commercially available aldehydes. A mechanistic hypothesis and synthetic application in the formal synthesis of trachelanthamidine, by transformation of a cyclic sulfoximine into a pyrroline, is also disclosed.

Development of a flow method for the hydroboration/oxidation of olefins.

A method for the continuous preparation of alcohols by hydroboration/oxidation of olefins using flow techniques is described. The process allows the isolation of up to 120 mmol h(-1) of the desired alcohol in a very rapid manner with good functional group tolerance. The flow setup can be modified to perform a continuous extraction of the desired alcohol from the biphasic mixture produced by the reaction.

Combining two-directional synthesis and tandem reactions. Part 21: Exploitation of a dimeric macrocycle for chain terminus differentiation and synthesis of an sp(3)-rich library.

The application of a tandem condensation/cyclisation/[3+2]-cycloaddition/elimination reaction gives an sp(3)-rich tricyclic pyrazoline scaffold with two ethyl esters in a single step from a simple linear starting material. The successive hydrolysis and cyclisation (with Boc anhydride) of these 3-dimensional architectures, generates unprecedented 16-membered macrocyclic bisanhydrides (characterised by XRD). Selective amidations could then be achieved by ring opening with a primary amine followed by HATU-promoted amide coupling to yield an sp(3)-rich natural product-like library.

Pea aphid odorant-binding protein ApisOBP6 discriminates between aphid sex pheromone components, aphid alarm pheromone and a host plant volatile.

Olfactory perception of pheromones in insects involves odorant-binding proteins (OBPs), relatively small proteins (ca.110-240 amino acid residues) that can bind reversibly to behaviourally active olfactory ligands. In this study, we investigated the binding in silico and in vitro of the aphid sex pheromone components (1R,4aS,7S,7aR)-nepetalactol and (4aS,7S,7aR)-nepetalactone and the aphid alarm pheromone (E)-ß-farnesene by OBPs from the pea aphid, Acyrthosiphon pisum. Screening of protein models of ApisOBPs1-11 with the aphid sex pheromone components suggested that ApisOPB6 was a candidate. Fluorescence assays using ApisOBP6 suggested that ApisOBP6 was able to bind both sex pheromone components and discriminate from the aphid alarm pheromone and the generic plant compound (R/S)-linalool. Saturation transfer difference NMR experiments with ApisOBP6 yielded results consistent to those from the fluorescence experiments, with a clear interaction between ApisOBP6 and (4aS,7S,7aR)-nepetalactone. These results describe a novel interaction and potential function for ApisOBP6, point to pre-receptor odorant discrimination by OBPs, and provide a platform for investigating the function of other aphid olfactory proteins involved in aphid chemical ecology.

Evaluation of two terpene-derived polymers as consolidants for archaeological wood.

The evaluation of two terpene-derived polymers, termed TPA6 and TPA7, as possible consolidants for archaeological wood was carried out. The overall objective of this work was to expand the non-aqueous treatment toolkit which is available for the conservation of the highly degraded Oseberg collection. The wood artefacts which were found on the Oseberg ship were treated with alum in the early twentieth century, leading to the formation of sulfuric acid and to the precarious state that they are in today. Some of these artefacts cannot be treated with conventional aqueous consolidants, like polyethylene glycol, due to their highly degraded and/or reconstructed nature. This study sought to examine the level of penetration of the polymers in archaeological wood and to evaluate their consolidative effect. Both TPA6 and TPA7 were soluble in isopropanol and had a Mw of 3.9 and 4.2 kDa respectively. A number of archaeological wood specimens were immersed in solutions of these polymers. Their penetration and effects were evaluated using weight and dimensional change, colour change, infrared spectroscopy, scanning electron microscopy and hardness tests. Both polymers successfully penetrated the wood specimens, with a higher concentration found on the surface versus the core. Additionally, both polymers appeared to increase the hardness of the specimen surfaces. Increasing the polymer concentration and soaking time in future investigations could potentially facilitate the penetration to the wood cores.

Combining two-directional synthesis and tandem reactions: a short formal synthesis of halichlorine.

A short and efficient synthesis of an advanced intermediate (1) in the Clive route to halichlorine has been achieved in 12 steps and 13.2% yield by a combined two-directional synthesis/tandem reaction strategy.

Comparative hydrodynamic characterisation of two hydroxylated polymers based on α-pinene- or oleic acid-derived monomers for potential use as archaeological consolidants.

The Oseberg Viking ship burial is one of the most extensive collections of Viking wooden artefacts ever excavated in Norway. In the early twentieth century, many of these artefacts were treated with alum in order to preserve them, inadvertently leading to their current degraded state. It is therefore crucial to develop new bioinspired polymers which could be used to conserve these artefacts and prevent further disintegration. Two hydroxylated polymers were synthesised (TPA6 and TPA7), using α-pinene- and oleic acid-derived monomers functionalised with an acrylate moiety. Characterisation using biomolecular hydrodynamics (analytical ultracentrifugation and high precision viscometry) has shown that these polymers have properties which would potentially make them good wood consolidants. Conformation analyses with the viscosity increment (ν) universal hydrodynamic parameter and ELLIPS1 software showed that both polymers had extended conformations, facilitating in situ networking when applied to wood. SEDFIT-MSTAR analyses of sedimentation equilibrium data indicates a weight average molar mass Mw of (3.9 ± 0.8) kDa and (4.2 ± 0.2) kDa for TPA6 and TPA7 respectively. Analyses with SEDFIT (sedimentation velocity) and MultiSig however revealed that TPA7 had a much greater homogeneity and a lower proportion of aggregation. These studies suggest that both these polymers-particularly TPA7-have characteristics suitable for wood consolidation, such as an optimal molar mass, conformation and a hydroxylated nature, making them interesting leads for further research.

Multicomponent synthesis of chiral sulfinimines.

Two oxathiozolidine-S-oxide templates have been developed and used in a four-component coupling protocol for the synthesis of a wide range of chiral sulfinimines in high enantiomeric excesses. The templates can be synthesized from cheap commodity chemicals in three steps in high yields. Furthermore the template is easily recovered in high yields for recycling.

One-pot synthesis of chiral nonracemic amines.

One-pot five-component reactions of oxathiazolidine-S-oxides with mesitylmagnesium bromide, lithium bis(trimethylsilyl)amide, aldehydes and Grignard reagents afford chiral nonracemic amines or sulfinamides in good yields and high stereoselectivities.

Stereoselective aza-Darzens reactions of tert-butanesulfinimines: convenient access to chiral aziridines.

Stereoselective synthesis of 2,3-di- and 2,2',3-tri-substituted aziridines in good yields and excellent diastereoselectivities are achieved through aza-Darzens reactions of a range of tert-butanesulfinyl aldimines and ketimines with ethyl bromoacetate.

Terpene polyacrylate TPA5 shows favorable molecular hydrodynamic properties as a potential bioinspired archaeological wood consolidant.

There is currently a pressing need for the development of novel bioinspired consolidants for waterlogged, archaeological wood. Bioinspired materials possess many advantages, such as biocompatibility and sustainability, which makes them ideal to use in this capacity. Based on this, a polyhydroxylated monomer was synthesised from α-pinene, a sustainable terpene feedstock derived from pine trees, and used to prepare a low molar mass polymer TPA5 through free radical polymerisation. This polymer was extensively characterised by NMR spectroscopy (chemical composition) and molecular hydrodynamics, primarily using analytical ultracentrifugation reinforced by gel filtration chromatography and viscometry, in order to investigate whether it would be suitable for wood consolidation purposes. Sedimentation equilibrium indicated a weight average molar mass Mw of (4.3 ± 0.2) kDa, with minimal concentration dependence. Further analysis with MULTISIG revealed a broad distribution of molar masses and this heterogeneity was further confirmed by sedimentation velocity. Conformation analyses with the Perrin P and viscosity increment ν universal hydrodynamic parameters indicated that the polymer had an elongated shape, with both factors giving consistent results and a consensus axial ratio of ~ 4.5. These collective properties-hydrogen bonding potential enhanced by an elongated shape, together with a small injectable molar mass-suggest this polymer is worthy of further consideration as a potential consolidant.

(2S)-2-[(2S*,5R*,6R*)-5,6-Dimeth-oxy-5,6-dimethyl-1,4-dioxan-2-yl]-1-[(S)-1,1-dimethyl-ethylsulfon-yl]aziridine.

The reaction of a sulfur ylide with a chiral non-racemic sulfinyl imine afforded the desired aziridine in excellent yield and subsequent oxidation of the sulfinyl moiety dissolved in anhydrous dichloro-methane using a 75% aqueous solution of 3-chloro-per-oxy-benzoic acid afforded the title compound, C(14)H(27)NO(6)S. The configuration of the newly formed stereogenic center at the point of attachment of the 1,4-dioxane ring to the aziridine ring is S. The configurations of the pre-existing sites 2-, 5-, and 6-positions of the 1,4-dioxane ring prior to reaction of sulfinyl imine with the sulfur ylide are S, R, and R, respectively. The C-N bond lengths of the aziridine are 1.478 (2) and 1.486 (2) Å.