Akin osteotomy: Is the type of staple fixation relevant?

BACKGROUND: Although different fixation techniques for the Akin osteotomy have been described in the literature, there are no many studies trying to analyze the differences between the types of fixation available. The aim of this study is to analyze if there are any differences between three types of staple fixation available in the market. METHOD: We present a retrospective study of 145 cases in which an Akin osteotomy was performed and fixed with three different kinds of implants staple A (28%), staple B (45%), and staple C (27%). Staple A is made out of stainless steel, and the surgeon mechanically controls the compression applied. Staple B increases the compression when heat is applied to it. Staple C has an intrinsic elastic memory that closes the osteotomy. In all cases, distal articular set angle, interphalangeal joint obliquity angle, and metatarsophalangeal angle were measured pre-operatively and 1.5 months post-operatively on dorsoplantar weight-bearing radiographs. Other details such as post-operative complications, implant migration, osteolysis, or fracture of the lateral cortex during surgery were also recorded. RESULTS: Clinical and radiological results show no relevant differences between the three types of fixation. The mean angular corrections of DASA, interphalangeal joint obliquity angle, and metatarsophalangeal angle were 5, 12, and 21, respectively, for staple A; 4, 10, and 19, respectively, for staple B; and 7, 10, and 23, respectively, for staple C. The rates of intra-operative and post-operative complications were similar for all groups. There was one case of infection per group. We had five cases of delayed union two with staple A and three with staple C. In four cases, there was a loss of correction, two of them fixed with staple A and two with staple C. Seven cases developed a Südeck's syndrome, four of them fixed with staple A and three with staple C. Fifteen patients suffered an uncontrolled fracture of the lateral cortex of the phalanx when performing the osteotomy (3, 8, and 4 cases fixed with staples A, B, and C, respectively), and 87.5% of the patients that developed a plantar displacement of the osteotomy had an uncontrolled fracture of the lateral cortex (p < 0.05). All three staples achieved a rigid internal fixation and minimal periosteum damage and provided a good bone-bone contact. CONCLUSIONS: According to our results, the radiological differences are minimal, and although the thermal compression staple had less complication, clinical differences were also not statistically significant. This means the choice of implant could be left to the surgeon's preferences or made according to cost.

Extending the Battery Life of the ZigBee Routers and Coordinator by Modifying Their Mode of Operation.

Wireless sensor networks proliferate more and more in all social scopes and sectors. Such networks are implemented in smart homes, smart cities, security systems, medical resources, agriculture, automotive industry, etc. Communication devices and sensors of such networks are powered with batteries: the enlarging of battery life is a hot research topic. We focus on wireless sensor networks based on ZigBee technology. While sleep standard operation mode is defined for end devices, it is not the case for the rest of devices (routers and Coordinator), which usually always remain in active mode. We designed a formal optimization model for maximizing the enlarging of the battery life of routers and Coordinator, allowing us to delimit practical successful conditions. It was successfully tested with a standard ZigBee datasheet comprising technical data for sensors, routers, and coordinators. It was tested in a practical wireless sensor network assembly with XBee S2C devices. We derived, from the previous model, a novel but simple protocol of communication among routers and coordinators. It was tested in different use cases. We showed that when end devices generate traffic at regular intervals, the enlarging of the battery life of routers and Coordinator was possible only under certain use cases.

Hardware Mechanism for Energy Saving in WiFi Access Points.

Wireless fidelity (WiFi) networks are deployed in several varied environments all around the World. Usually, the wireless fidelity access points are always on in houses and other small companies. In buildings of large companies and public organizations and in university campuses the number of access points is elevated; they are powered using power over the ethernet and are always on. Consequently, they consume a considerable amount of electric energy. The last versions of the International Electric and Electronic Engineers 802.11 standardized procedures to save energy in a wireless fidelity terminal but not in the access point. We designed a formal method to show when energy can be saved in wireless fidelity access points considering different power supplies for the access point: an electric energy battery and a standard voltage supply. We use an external battery that stores electric energy during an interval of time from a standard voltage supply (Charge period). After that interval (Discharge period), the energy supply for the access point is the external battery. Those intervals of time are repeated sequentially (Charge and Discharge cycles). We verified our formal model implementing a hardware circuit that controls the power supply for the access point. The amount of energy saving for a large number of of access points during a long period of time is considerably high.

Low Cost Efficient Deliverying Video Surveillance Service to Moving Guard for Smart Home.

Low-cost video surveillance systems are attractive for Smart Home applications (especially in emerging economies). Those systems use the flexibility of the Internet of Things to operate the video camera only when an intrusion is detected. We are the only ones that focus on the design of protocols based on intelligent agents to communicate the video of an intrusion in real time to the guards by wireless or mobile networks. The goal is to communicate, in real time, the video to the guards who can be moving towards the smart home. However, this communication suffers from sporadic disruptions that difficults the control and drastically reduces user satisfaction and operativity of the system. In a novel way, we have designed a generic software architecture based on design patterns that can be adapted to any hardware in a simple way. The implanted hardware is of very low economic cost; the software frameworks are free. In the experimental tests we have shown that it is possible to communicate to the moving guard, intrusion notifications (by e-mail and by instant messaging), and the first video frames in less than 20 s. In addition, we automatically recovered the frames of video lost in the disruptions in a transparent way to the user, we supported vertical handover processes and we could save energy of the smartphone's battery. However, the most important thing was that the high satisfaction of the people who have used the system.

Interference Effects Redress over Power-Efficient Wireless-Friendly Mesh Networks for Ubiquitous Sensor Communications across Smart Cities.

Ubiquitous sensing allows smart cities to take control of many parameters (e.g., road traffic, air or noise pollution levels, etc.). An inexpensive Wireless Mesh Network can be used as an efficient way to transport sensed data. When that mesh is autonomously powered (e.g., solar powered), it constitutes an ideal portable network system which can be deployed when needed. Nevertheless, its power consumption must be restrained to extend its operational cycle and for preserving the environment. To this end, our strategy fosters wireless interface deactivation among nodes which do not participate in any route. As we show, this contributes to a significant power saving for the mesh. Furthermore, our strategy is wireless-friendly, meaning that it gives priority to deactivation of nodes receiving (and also causing) interferences from (to) the rest of the smart city. We also show that a routing protocol can adapt to this strategy in which certain nodes deactivate their own wireless interfaces.

Design of a sustainable system for wastewater treatment and generation of biofuels based on the biomass of the aquatic plant Eichhornia Crassipes.

Colombia's continuous contamination of water resources and the low alternatives to produce biofuels have affected the fulfillment of the objectives of sustainable development, deteriorating the environment and affecting the economic productivity of this country. Due to this reality, projects on environmental and economic sustainability, phytoremediation, and the production of biofuels such as ethanol and hydrogen were combined. The objective of this article was to design and develop a sustainable system for wastewater treatment and the generation of biofuels based on the biomass of the aquatic plant Eichhornia crassipes. A system that simulates an artificial wetland with live E. crassipes plants was designed and developed, removing organic matter contaminants; subsequently, and continuing the sustainability project, bioreactors were designed, adapted, and started up to produce bioethanol and biohydrogen with the hydrolyzed biomass used in the phytoremediation process, generating around 12 g/L of bioethanol and around 81 ml H2/g. The proposed research strategy suggests combining two sustainable methods, bioremediation and biofuel production, to preserve the natural beauty of water systems and their surroundings.

IA-Body Composition CT at T12 in Idiopathic Pulmonary Fibrosis: Diagnosing Sarcopenia and Correlating with Other Morphofunctional Assessment Techniques.

BACKGROUND: Body composition (BC) techniques, including bioelectrical impedance analysis (BIVA), nutritional ultrasound® (NU), and computed tomography (CT), can detect nutritional diagnoses such as sarcopenia (Sc). Sc in idiopathic pulmonary fibrosis (IPF) is associated with greater severity and lower survival. Our aim was to explore the correlation of BIVA, NU and functional parameters with BC at T12 level CT scans in patients with IPF but also its relationship with degree of Sc, malnutrition and mortality. METHODS: This bicentric cross-sectional study included 60 IPF patients (85.2% male, 70.9 ± 7.8 years). Morphofunctional assessment (MFA) techniques included BIVA, NU, CT at T12 level (T12-CT), handgrip strength, and timed up and go. CT data were obtained using FocusedON®. Statistical analysis was conducted using JAMOVI version 2.3.22 to determine the cutoff points for Sc in T12-CT and to analyze correlations with other MFA techniques. RESULTS: the cutoff for muscle area in T12-CT was ≤77.44 cm2 (area under the curve (AUC) = 0.734, sensitivity = 41.7%, specificity = 100%). The skeletal muscle index (SMI_T12CT) cutoff was ≤24.5 cm2/m2 (AUC = 0.689, sensitivity = 66.7%, specificity = 66.7%). Low SMI_T12CT exhibited significantly reduced median survival and higher risk of mortality compared to those with normal muscle mass (SMI cut off ≥ 28.8 cm/m2). SMI_T12CT was highly correlated with body cell mass from BIVA (r = 0.681) and rectus femoris cross-sectional area (RF-CSA) from NU (r = 0.599). Cronbach's α for muscle parameters across different MFA techniques and CT was 0.735, confirming their validity for evaluating muscle composition. CONCLUSIONS: T12-CT scan is a reliable technique for measuring low muscle mass in patients with IPF, specifically when the L3 vertebrae are not captured. An SMI value of <28.8 is a good predictor of low lean mass and 12-month mortality in IPF patients.

Mobile sensing systems.

Rich-sensor smart phones have made possible the recent birth of the mobile sensing research area as part of ubiquitous sensing which integrates other areas such as wireless sensor networks and web sensing. There are several types of mobile sensing: individual, participatory, opportunistic, crowd, social, etc. The object of sensing can be people-centered or environment-centered. The sensing domain can be home, urban, vehicular… Currently there are barriers that limit the social acceptance of mobile sensing systems. Examples of social barriers are privacy concerns, restrictive laws in some countries and the absence of economic incentives that might encourage people to participate in a sensing campaign. Several technical barriers are phone energy savings and the variety of sensors and software for their management. Some existing surveys partially tackle the topic of mobile sensing systems. Published papers theoretically or partially solve the above barriers. We complete the above surveys with new works, review the barriers of mobile sensing systems and propose some ideas for efficiently implementing sensing, fusion, learning, security, privacy and energy saving for any type of mobile sensing system, and propose several realistic research challenges. The main objective is to reduce the learning curve in mobile sensing systems where the complexity is very high.

Factors for the implementation of the circular economy in Big Data environments in service companies in post pandemic times of COVID-19: The case of Colombia.

In emerging economies, Big Data (BD) analytics has become increasingly popular, particularly regarding the opportunities and expected benefits. Such analyzes have identified that the production and consumption of goods and services, while unavoidable, have proven to be unsustainable and inefficient. For this reason, the concept of the circular economy (CE) has emerged strongly as a sustainable approach that contributes to the eco-efficient use of resources. However, to develop a circular economy in DB environments, it is necessary to understand what factors influence the intention to accept its implementation. The main objective of this research was to assess the influence of attitudes, subjective norms, and perceived behavioral norms on the intention to adopt CE in BD-mediated environments. The methodology is quantitative, cross-sectional with a descriptive correlational approach, based on the theory of planned behavior and a Partial Least Squares Structural Equation Model (PLS-SEM). A total of 413 Colombian service SMEs participated in the study. The results show that managers' attitudes, subjective norms, and perceived norms of behavior positively influence the intentions of organizations to implement CB best practices. Furthermore, most organizations have positive intentions toward CE and that these intentions positively influence the adoption of DB; however, the lack of government support and cultural barriers are perceived as the main limitation for its adoption. The research leads to the conclusion that BD helps business and government develop strategies to move toward CE, and that there is a clear positive will and intent toward a more restorative and sustainable corporate strategy.

Ubiquitous monitoring of electrical household appliances.

The number of appliances at home is increasing continuously, mainly because they make our lives easier. Currently, technology is integrated in all objects of our daily life. TCP/IP let us monitor our home in real time and check ubiquitously if something is happening at home. Bearing in mind this idea, we have developed a low-cost system, which can be used in any type of electrical household appliance that takes information from the appliance and posts the information to the Twitter Social network. Several sensors placed in the household appliances gather the sensed data and send them wired or wirelessly, depending on the case, using small and cheap devices to a gateway located in the home. This gateway takes decisions, based on the received data, and sends notifications to Twitter. We have developed a software application that takes the values and decides when to issue an alarm to the registered users (Twitter friends of our smart home). The performance of our system has been measured taking into account the home network (using IEEE 802.3u and IEEE 802.11g) and the data publishing in Twitter. As a result, we have generated an original product and service for any electrical household appliance, regardless of the model and manufacturer, that helps home users improve their quality of life. The paper also shows that there is no system with the same innovative features like the ones presented in this paper.

Architecture and protocol of a semantic system designed for video tagging with sensor data in mobile devices.

Current mobile phones come with several sensors and powerful video cameras. These video cameras can be used to capture good quality scenes, which can be complemented with the information gathered by the sensors also embedded in the phones. For example, the surroundings of a beach recorded by the camera of the mobile phone, jointly with the temperature of the site can let users know via the Internet if the weather is nice enough to swim. In this paper, we present a system that tags the video frames of the video recorded from mobile phones with the data collected by the embedded sensors. The tagged video is uploaded to a video server, which is placed on the Internet and is accessible by any user. The proposed system uses a semantic approach with the stored information in order to make easy and efficient video searches. Our experimental results show that it is possible to tag video frames in real time and send the tagged video to the server with very low packet delay variations. As far as we know there is not any other application developed as the one presented in this paper.

Osteotomies of the second phalanx of the great toe: A clinical experience.

BACKGROUND: At the time of the first report on the feasibility of corrective osteotomies of the distal phalanx (DP) of the great toe there were no published studies addressing this type of surgery. Along this line, and throughout our clinical experience, this paper tries to show the clinical benefits of hallux DP osteotomies when correcting interphalangeal valgus deformities (IHV) of the great toe, either with open or percutaneous procedure. MATERIAL AND METHODS: This is a review of 18 cases in which a DP osteotomy was performed in 2 different institutions, 8 cases were performed using open technique and 10 cases percutaneously. The correction obtained was analyzed by measuring the distal articular set angle (DASA), obliquity angle (AP1), asymmetry angle (AP2), and global distal phalanx deviation (GDPD) angle before and after the surgery on dorso-plantar weight-bearing radiographs in all cases. Clinical results were also recorded. RESULTS: Excellent clinical and radiological results were achieved with both techniques in all patients with no complications. The average DP angular deformity correction in terms of AP1, AP2 and GDPD angles were 4.58º ± 5.55º, 8.95º ± 4.77º and 16.53º ± 7.26 respectively. In 10 cases an Akin osteotomy was associated. CONCLUSION: In cases with valgus deviation in the hallux DP, a corrective osteotomy of the DP alone or associated to osteotomy of the PP should be considered as a useful tool. The technique is feasible and has no technical difficulties for an orthopedic surgeon with experience on feet surgery.

Blood Pressure Monitoring and Perinatal Outcomes in Normotensive Women with Gestational Diabetes Mellitus.

Alterations in ambulatory blood pressure detected by monitoring (ABPM) have been associated with perinatal complications in hypertensive pregnant women. AIM: To establish the relationships between the blood pressure (BP) profiles detected by ABPM and adverse perinatal outcomes in normotensive women with gestational diabetes mellitus (GDM). METHODS: A prospective study of normotensive women in whom 24 h ABPM was performed at 28-32 weeks of pregnancy. The obstetric and perinatal outcomes were evaluated. RESULTS: Two hundred patients were included. Thirty-seven women with GDM and obesity had significantly higher mean systolic BP (SBP) and nocturnal SBP and diastolic BP (DBP) compared to women with only GDM (n = 86). Nocturnal SBP (OR = 1.077; p = 0.015) and obesity (OR = 1.131; p = 0.035) were risk factors for the development of hypertensive disorders of pregnancy (HDPs). Mothers of newborns with neonatal complications (n = 27) had higher nocturnal SBP (103.8 vs. 100 mmHg; p = 0.047) and DBP (62.7 vs. 59.4; p = 0.016). Women who delivered preterm (n = 10) had higher BP and a non-dipper pattern (p = 0.005). CONCLUSIONS: Nocturnal SBP was a predictor of HDPs in normotensive women with obesity or GDM. Alterations in ABPM in these patients were associated with poor obstetric and perinatal outcomes.

Risk Factors of DAIR Failure and Validation of the KLIC Score: A Multicenter Study of Four Hundred Fifty-Five Patients.

Background: Debridement, antibiotic agents, and implant retention (DAIR) is a currently accepted approach for the treatment of early prosthetic joint infections (PJI). The success of a DAIR procedure has shown variable results throughout the published literature. Scoring systems such as the Kidney, Liver, Index surgery, Cemented prosthesis, and C-reactive protein value (KLIC) score for the selection of patients that are likely to benefit from DAIR have proved to be helpful in decision making. Our study aims to further validate the KLIC score using a large external multicentric cohort and to evaluate other risk factors for failure. Patients and Methods: A retrospective analysis of patients with an early acute PJI who were treated with DAIR and recorded in a database of eight Spanish university hospitals was performed. According to pre-operative variables of the KLIC study, patients were categorized into five groups: group A, ≤2 points; group B, 2.5-3.5 points; group C, 4-5 points; group D, 5.5-6.5 points; and group E, ≥7 points. Failure rates were compared between groups at 60 days and after 60 days of DAIR. Further variables for risk of failure were also analyzed. Results: A total of 455 patients with early acute PJI were included in the analyses. At 60 days, patients presenting with pre-operative elevated C-reactive protein serum levels, Staphylococcus aureus, and polymicrobial infections were associated with failure. Failure rates recorded were 12% for group A (n = 210), 18% for group B (n = 83), 26% for group C (n = 89), 24% for group D (n = 66), and 0% for group E (n = 7). Univariable analysis between consecutive groups of the KLIC score showed no differences for failure before 60 days of the DAIR procedure. Scheduled surgery and having the procedure performed by a specialized unit were also identified as important factors for DAIR success. Conclusions: Our results suggest the KLIC score was not useful for predicting failure in our cohort. Furthermore, our results indicate a specialized unit should conduct DAIR procedures.

A hierarchical communication architecture for oceanic surveillance applications.

The interest in monitoring applications using underwater sensor networks has been growing in recent years. The severe communication restrictions imposed by underwater channels make that efficient monitoring be a challenging task. Though a lot of research has been conducted on underwater sensor networks, there are only few concrete applications to a real-world case study. In this work, hence, we propose a general three tier architecture leveraging low cost wireless technologies for acoustic communications between underwater sensors and standard technologies, Zigbee and Wireless Fidelity (WiFi), for water surface communications. We have selected a suitable Medium Access Control (MAC) layer, after making a comparison with some common MAC protocols. Thus the performance of the overall system in terms of Signals Discarding Rate (SDR), signalling delay at the surface gateway as well as the percentage of true detection have been evaluated by simulation, pointing out good results which give evidence in applicability's favour.

Cemented Dual Mobility Cup for Primary Total Hip Arthroplasty in Elder Patients with High-Risk Instability.

Several studies have shown that double mobility (DM) cups reduce postoperative dislocations. Does the cemented dual mobility cup reduce dislocations in a specific cohort of elder patients with a high dislocation risk? Our hypothesis is that this implant is optimal for elder patients because it reduces early dislocation. We have retrospectively reviewed elder patients who underwent total hip arthroplasty (THA) with cemented double mobility cup between March 2009 and January 2018. The inclusion criteria were patients (>75 years) who were operated on for primary THA (osteoarthritis or necrosis) with a cemented dual mobility cup and a high-risk instability (at least two patient-dependent risk factors for instability). The exclusion criteria were revision surgeries or hip fracture. In all the cases, the same surgical approach was performed with a Watson Jones modified approach in supine position. We have collected demographic data, instability risk factors. Patients were classified using the Devane's score, Merle d'Aubigné score and the patient's likelihood of falling with the Morse Fall Scale. Surgical and follow-up complications were collected from their medical history. Sixty-eight arthroplasties (68 patients) were included in the study. The median age was 81.7 years (SD 6.4), and the American Society of Anesthesiologists (ASA) score showed a distribution: II 27.94%, III 63.24% and IV 8.82%. Devane's score was less than five in all of the cases. At least two patient-dependent risk factors for instability (87% had three or more) were present in each case. The median follow-up time was 49.04 months (SD 22.6). Complications observed were two cases of infection and one case of aseptic loosening at 15 months which required revision surgery. We did not observe any prosthetic dislocation. The cemented dual mobility cup is an excellent surgical option on primary total hip arthroplasties for elder patients with high-risk instability.

Proximal tibiofibular joint changes after closed-wedge high tibial osteotomy. Are they relevant?

BACKGROUND: There is some controversy about how the proximal tibiofibular joint (PTFJ) capsulotomy changes PTFJ anatomy in closed-wedge high tibial osteotomy (CW-HTO) and about how this affects ankle and knee mobility and the onset of lateral knee pain. The aim of this study is to evaluate changes in PTFJ after CW-HTO, and its possible clinical significance. METHODS: This study includes 50 patients who underwent CW-HTO with tibiofibular capsulotomy from 2000 to 2018 in our hospital. A clinical evaluation was conducted to evaluate pain location. The degrees of osteoarthritis and the proximal fibular subluxation were evaluated on radiographs. A dynamic analysis of the PTFJ was also performed comparing proximal fibular head subluxation on anteroposterior knee radiographs with the ankle placed in neutral position and dorsiflexed. RESULTS: The clinical evaluation revealed that two patients had a sore scar, five had pain on the PTFJ with manual compression, and none referred lateral compartment pain. The radiological analysis revealed an average proximal subluxation of the fibular head after the osteotomy of 9.64 (range: 0-29) mm, which was greater in oblique PTFJ (p < 0.05). After the surgery, all the patients developed some degree of PTFJ arthritis. There was no correlation between lateral pain and proximal fibular subluxation, tibiofibular arthritis, or lateral compartment arthritis. The dynamic analysis revealed no significant changes. CONCLUSIONS: After CW-HTO all the patients developed proximal subluxation of the fibular head and a variable degree of PTFJ osteoarthritis, but these changes seem to be unrelated with lateral knee pain.

La neuroendoscopia: una técnica revolucionaria en el campo de la neurocirugía / Neuroendoscopy: a revoluciotionary technique in neurosurgery

La neuroendoscopia es un procedimiento mínimamente invasivo que se desarrolló a principios del siglo pasado y tiene importancia en el campo de la neurocirugía, representa un método innovador ya que aporta una amplia visualización de las estructuras anatómicas con mínimo traumatismo del tejido nervioso, contribuyendo al diagnóstico y tratamiento de diversas afecciones intra y extracerebral. Se realizó una búsqueda bibliográfica con el propósito de identificar, analizar y describir algunas patologías neuroquirúrgicas que se han tratado bajo neuroendoscopia, así como los aportes más relevantes en cirugía pediátrica y de columna, con el fin de exponer el impacto que ha tenido esta técnica en el desarrollo de la cirugía moderna.

Neuroendoscopy is a minimally-invasive procedure that was developed at the beginning of the last century and plays an important role in neurosurgery. It is an innovative method since it enables a broad visualization of the anatomical structures with minimal damage to the nervous tissue, contributing to the diagnosis and treatment of a variety of intra and extracerebral conditions. A bibliographic search was carried out to identify, analyze and describe some neurological pathologies that have been treated using neuroendoscopic surgery. The most relevant contributions to pediatric and spine surgery are also outlined to show the impact that this technique has had in the progress of modern surgery.