Multileaf collimator characterization and modeling for a 1.5 T MR-linac using static synchronous and asynchronous sweeping gaps.

Objective.The Elekta unity MR-linac delivers step-and-shoot intensity modulated radiotherapy plans using a multileaf collimator (MLC) based on the Agility MLC used on conventional Elekta linacs. Currently, details of the physical Unity MLC and the computational model within its treatment planning system (TPS)Monacoare lacking in published literature. Recently, a novel approach to characterize the physical properties of MLCs was introduced using dynamic synchronous and asynchronous sweeping gap (aSG) tests. Our objective was to develop a step-and-shoot version of the dynamic aSG test to characterize the Unity MLC and the computational MLC models in theMonacoandRayStationTPSs.Approach.Dynamic aSG were discretized into a step-and-shoot aSG by investigating the number of segments/sweep and the minimal number of monitor units (MU) per segment. The step-and-shoot aSG tests were compared to the dynamic aSG tests on a conventional linac at a source-to-detector distance of 143.5 cm, mimicking the Unity configuration. the step-and-shoot aSG tests were used to characterize the Unity MLC through measurements and dose calculations in both TPSs.Main results.The step-and-shoot aSGs tests with 100 segments and 5 MU/segment gave results very similar to the dynamic aSG experiments. The effective tongue-and-groove width of the Unity gradually increased up to 1.4 cm from the leaf tip end. The MLC models inRayStationandMonacoagreed with experimental data within 2.0% and 10%, respectively. The largest discrepancies inMonacowere found for aSG tests with >10 mm leaf interdigitation, which are non-typical for clinical plans.Significance.The step-and-shoot aSG tests accurately characterize the MLC in step-and-shoot delivery mode. The MLC model inRayStation2023B accurately describes the tongue-and-groove and leaf tip effects whereasMonacooverestimates the tongue-and-groove shadowing further away from the leaf tip end.

Elective breast radiotherapy including level I and II lymph nodes: A planning study with the humeral head as planning risk volume.

BACKGROUND: The aim of this study was to assess the dose to the humeral head planning risk volume with the currently used high tangential fields (HTF) and compare different planning techniques for breast radiotherapy including axillary level I and II lymph nodes (PTVn) while sparing the humeral head. METHODS: Ten patients with left-sided breast cancer were enrolled in a planning study with 16 fractions of 2.66 Gy. Four planning techniques were compared: HTF, HTF with sparing of the humeral head, 6-field IMRT with sparing of the humeral head and VMAT with sparing of the humeral head. The humeral head + 10 mm was spared by restricting V40Gy < 1 cc. RESULTS: The dose to the humeral head was too high with HTF (V40Gy on average 20.7 cc). When sparing the humeral head in HTF, PTVn V90% decreased significantly from 97.9% to 89.4%. 6-field IMRT and VMAT had a PTVn V90% of 98.2% and 99.5% respectively. However, dose to the lungs, heart and especially the contralateral breast increased with VMAT. CONCLUSIONS: The humeral head is rarely spared when using HTF. When sparing the humeral head, the 6-field IMRT technique leads to adequate PTV coverage while not increasing the dose to the OARs.

Dosimetric impact of contouring and image registration variability on dynamic 125I prostate brachytherapy.

PURPOSE: The quality of permanent prostate brachytherapy can be increased by addition of imaging modalities in the intraoperative procedure. This addition involves image registration, which inherently has inter- and intraobserver variabilities. We sought to quantify the inter- and intraobserver variabilities in geometry and dosimetry for contouring and image registration and analyze the results for our dynamic 125I brachytherapy procedure. METHODS AND MATERIALS: Five observers contoured 11 transrectal ultrasound (TRUS) data sets three times and 11 CT data sets one time. The observers registered 11 TRUS and MRI data sets to cone beam CT (CBCT) using fiducial gold markers. Geometrical and dosimetrical inter- and intraobserver variabilities were assessed. For the contouring study, structures were subdivided into three parts along the craniocaudal axis. RESULTS: We analyzed 165 observations. Interobserver geometrical variability for prostate was 1.1 mm, resulting in a dosimetric variability of 1.6% for V100 and 9.3% for D90. The geometric intraobserver variability was 0.6 mm with a V100 of 0.7% and D90 of 1.1%. TRUS-CBCT registration showed an interobserver variability in V100 of 2.0% and D90 of 3.1%. Intraobserver variabilities were 0.9% and 1.6%, respectively. For MRI-CBCT registration, V100 and D90 were 1.3% and 2.1%. Intraobserver variabilities were 0.7% and 1.1% for the same. CONCLUSIONS: Prostate dosimetry is affected by interobserver contouring and registration variability. The observed variability is smaller than underdosages that are adapted during our dynamic brachytherapy procedure.