Nitro Indole Derivatives as Novel Dual-Polarity Matrices for MALDI Mass Spectrometry and Imaging with Broad Applications.

A new matrix framework is presented in this study for the improved ionization efficiency of complex mixtures by matrix-assisted laser desorption ionization (MALDI) mass spectrometry/imaging. Five nitro indole (NI) derivatives [3-methyl-4-nitro-1H-indole (3,4-MNI), 3-methyl-6-nitro-1H-indole (3,6-MNI), 2,3-dimethyl-4-nitro-1H-indole (2,3,4-DMNI), 2,3-dimethyl-6-nitro-1H-indole (2,3,6-DMNI), and 4-nitro-1H-indole (4-NI)] were synthesized and shown to produce both positive and negative ions with a broad class of analytes as MALDI matrices. NI matrices were compared to several common matrices, such as 2,5-dihydroxybenzoic acid (DHB), alpha-cyano-4-hydroxylcinnamic acid (CHCA), sinapinic acid (SA), 1,5-diaminonaphthelene (1,5-DAN), and 9-aminoacridine (9-AA), for the analysis of lipid, peptide, protein, glycan, and perfluorooctanesulfonic acid (PFOS) compounds. 3,4-MNI demonstrated the best performance among the NI matrices. This matrix resulted in reduced ion suppression and better detection sensitivity for complex mixtures, for example, egg lipids/milk proteins/PFOS in tap water, while 2,3,6-DMNI was the best matrix for blueberry tissue imaging. Several important aspects of this work are reported: (1) dual-polarity ion production with NI matrices and complex mixtures; (2) quantitative analysis of PFOS with a LOQ of 0.5 ppb in tap water and 0.05 ppb in MQ water (without solid phase extraction enrichment), with accuracy and precision within 5%; (3) MALDI imaging with 2,3,6-DMNI as a matrix for plant metabolite/lipid identification with ionization enhancement in the negative ion mode m/z 600-900 region; and (4) development of a thin film deposition under/above tissue method for MALDI imaging with a vacuum sublimation matrix on a high-vacuum MALDI instrument.

Selective adsorption of bismuth telluride nanoplatelets through electrostatic attraction.

We demonstrate a facile technique to assemble solution phase-synthesized bismuth telluride (Bi2Te3) nanoplatelets into arrays of micropatterns. Aminosilane self-assembled monolayers (SAMs) are printed on silicon dioxide (SiO2) substrates using microcontact printing (µCP). The SAM printed surfaces are terminated with amine-groups allowing Bi2Te3 nanoplatelet selective adsorption by electrostatic attraction. Using Kelvin probe force microscopy, the electrical potential difference between aminosilane SAM and Bi2Te3 nanoplatelet surfaces is found to be ∼650 mV, which is larger than that (∼400 mV) between the SiO2 substrate and Bi2Te3 nanoplatelet surfaces. The selective adsorption provides an opportunity for integrating solution phase-grown topological insulators toward several device-level applications.

Quantitative MALDI-MS and Imaging of Fungicide Pyrimethanil in Strawberries with 2-Nitrophloroglucinol as an Effective Matrix.

This work explores the use of 2-nitrophloroglucinol (2-NPG) as a matrix for quantitative analysis of the fungicide Pyrimethanil (PYM) in strawberries using matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) and imaging. 2-NPG was selected for PYM analysis for optimum sensitivity and precision compared to common matrices α-cyano-4-hydroxylcinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB). PYM-sprayed strawberries were frozen 0, 1, 3, and 4 days after treatment and sectioned for MALDI imaging. The remaining part of each strawberry was processed using quick easy cheap effective rugged and safe (QuEChERS) extraction and analyzed by MALDI-MS and ultraperformance liquid chromatography multireaction-monitoring (UPLC-MRM). MALDI-MS showed comparable performance to UPLC-MRM in calibration, LOD/LOQ, matrix effect, and recovery, with the benefit of fast analysis. The MALDI imaging results demonstrated that PYM progressively penetrated the interior of the strawberry over time and the PYM concentration on tissue measured by MALDI imaging correlated linearly with MALDI-MS and UPLC-MRM measurements and accounts for 79% MALDI-MS and 85% UPLC-MRM values on average. Additionally, quartz crystal microbalance (QCM) was introduced as a new approach to determine strawberry tissue mass per area for MALDI imaging absolute quantitation with sensitive, direct, and localized measurements. This work demonstrates the first example of absolute quantitative MALDI imaging of pesticides in a heterogeneous plant tissue. The novel use of the 2-NPG matrix in quantitative MALDI-MS and imaging could be applied to other analytes, and the new QCM tissue mass per area method is potentially useful for quantitative MALDI imaging of heterogeneous tissues in general.

Spin polarized electron tunneling and magnetoresistance in molecular junctions.

This chapter reviews tunneling of spin-polarized electrons through molecules positioned between ferromagnetic electrodes, which gives rise to tunneling magnetoresistance. Such measurements yield important insight into the factors governing spin-polarized electron injection into organic semiconductors, thereby offering the possibility to manipulate the quantum-mechanical spin degrees of freedom for charge carriers in optical/electrical devices. In the first section of the chapter a brief description of the Jullière model of spin-dependent electron tunneling is reviewed. Next, a brief description of device fabrication and characterization is presented. The bulk of the review highlights experimental studies on spin-polarized electron tunneling and magnetoresistance in molecular junctions. In addition, some experiments describing spin-polarized scanning tunneling microscopy/spectroscopy on single molecules are mentioned. Finally, some general conclusions and prospectus on the impact of spin-polarized tunneling in molecular junctions are offered.

A spin of their own.

Although it is tempting to compare organic semiconductors with their inorganic counterparts, the spin-injection and spin-transport properties are fundamentally different. The challenges in understanding and improving such properties make organic spintronics an exciting field in its own right.

Broadband polarized emission from P(NDI2OD-T2) polymer.

We investigate the P(NDI2OD-T2) photophysical properties via absorbance and fluorescence spectroscopy, in association with the experimental approach baptized Stokes Spectroscopy, which provides valuable material information through the acquisition and analysis of the fluorescence polarization degree. By changing solvents and using different samples such as solutions, thick, and thin films, it is possible to control the polarization degree spectrum associated to the fluorescence emitted by the polymer's isolated chains and aggregates. We show that the polarization degree could become a powerful tool to obtain information related to the samples morphology, which is connected to their microscopic structure. Moreover, the polarization degree spectra suggest that depolarization effects linked to energy and charge transfer mechanisms are likely taking place. Our findings indicate that P(NDI2OD-T2) polymers are excellent candidates for the advancement of organic technologies that rely on the emission and detection of polarized lights.

A spectroscopic study of mercury vapor adsorption on gold nanoparticle films.

We have modified the surfaces of glass and Si(100) with 3-aminopropyltrimethoxy silane, a fourth generation amine-terminated poly(amidoamine) dendrimer, and poly(diallydimethyl ammonium chloride) to facilitate adsorption onto colloidal gold particles (average diameter 3, 5, 12, and 22 nm). UV-vis absorption spectroscopy and atomic force microscopy monitored the adsorption process, which is governed by particle diffusion to the surface. The differences in adsorption to the three adhesion layers as a function of pH are discussed. Mercury vapor was exposed to the gold particle films and quantified by X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy. The surface plasmon oscillation of 5-, 12-, and 22-nm particles blue-shifts after exposure to parts-per-million levels of mercury vapor in air. Particle films prepared from the 3-nm gold particles develop a broad peak centered near 530 nm after exposure to mercury vapor. The results demonstrate a novel "litmus" film for mercury vapor.

Important role of surface fluoride in nitrogen-doped TiO2 nanoparticles with visible light photocatalytic activity.

Nitrogen-doped TiO2 nanoparticles have been synthesized using sol-gel methods and subsequently fluorinated at room temperature by aging in acidic solutions of NaF. The nanoparticles were characterized by X-ray photoelectron spectroscopy, X-ray diffraction, UV-vis, and IR diffuse reflectance spectroscopy. After aging at room temperature in NaF solutions, the Ti-OH groups on the surface of the TiO2 nanoparticles were replaced by Ti-F bonds, which resulted in a decrease of the point of zero charge from pH 5.4 to 2.8. Most importantly, the nitrogen dopants were retained after the fluorination process, and the amorphous nanoparticles were partially converted into the anatase phase. Annealing the photocatalysts resulted in a decrease of both the nitrogen and fluoride atomic concentration. Diffuse reflectance spectra show an increase in absorbance above 400 nm after annealing the F,N-doped TiO2, which suggests the formation of color centers. The photoactivity of the F,N-doped and N-doped TiO2 catalysts were evaluated by monitoring by the decolorization of methylene blue with visible light. Mass spectrometric analysis revealed that methylene blue undergoes successive demethylation, and more importantly, the rate of decolorization depends on the fluoride concentration. These results show the importance of a two-step synthesis method to independently control the nitrogen and fluoride concentration.