Antimicrobial Peptide Assembly on Zwitterionic Polymer Films to Slow Down Biofilm Formation.

Formation of biofilms on equipment used in various fields, such as medicine, domestic sanitation, and marine transportation, can cause serious problems. The use of antibiofouling and bactericidal modifications is a promising strategy for inhibiting bacterial adhesion and biofilm formation. To further enhance the antibiofilm properties of a surface, various combinations of bactericidal modifications alongside antibiofouling modifications have been developed. Optimization of the arrangements of antimicrobial peptides on the antibiofouling surface would allow us to design longer-life antibiofilm surface modifications. In this study, a postmodification was conducted with different design using the antimicrobial peptide KR12 on an antibiofouling copolymer film consisting of 2-methacryloyloxyethyl phosphorylcholine, 3-methacryloxypropyl trimethoxysilane, and 3-(methacryloyloxy) propyl-tris(trimethylsilyloxy) silane. The distance of KR12 from the film was adjusted by combining different lengths of poly(ethylene glycol) (PEG) spacers (molecular weights are 2000 and 5000). The density of KR12 was ranged from 0.06 to 0.22 nm-2. When these modified surfaces were exposed to a nutrient-rich TSB suspension, the bacterial area formed by E. coli covered 5-127% of the original copolymer film. We found that a significant distance between the bactericidal and antibiofouling modifications, along with a higher density of bactericidal modifications, slows down the biofilm formation.

Detailed Study of the Interactions between Glycopolymers in the Presence of Metal Ions through Quartz Crystal Microbalance Method.

Polymer self-assemblies driven by enthalpic interactions, such as hydrogen bonding and electrostatic interactions, exhibit distinct properties compared to those driven by hydrophobic interactions. Carbohydrate-carbohydrate interactions, which are observed in physiological phenomena, also fall under enthalpic interactions. Our group previously reported on self-assemblies of methacrylate-type glycopolymers carrying mannose units in the presence of calcium ions; however, a detailed study of these interactions was lacking. In this work, we investigated the interactions between glycopolymers using the quartz crystal microbalance (QCM) method. Our quantitative analysis revealed that the interactions between the glycopolymers were influenced by the carbohydrate structures in the side chains, the types of divalent metal ions, and the structures of the polymer main chains. Notably, the strongest interaction was observed in the combination of methacrylate-type glycopolymers carrying mannose units and calcium ions, demonstrating their potential as a driving force for polymer self-assembly.

Bactericidal Ability of Well-Controlled Cationic Polymer Brush Surfaces and the Interaction Analysis by Quartz Crystal Microbalance with Dissipation.

In this study, cationic poly(2-(methacryloyloxy)ethyl) trimethylammonium chloride) (PMTAC) brush surfaces were prepared by surface-initiated atom transfer radical polymerization (SI-ATRP), and their properties were systematically investigated to discuss the factors affecting their bactericidal properties and interactions with proteins. Model equations for the analysis of electrophoretic behaviors were considered for accurate parameter estimation to indicate the charge density at the interface. The zeta potential dependency of the PMTAC brushes was successfully analyzed using Smolchowski's equation and the Gouy-Chapman model, which describes the diffusive electric double layer. The analysis of the quartz crystal microbalance with dissipation (QCM-D) indicated that the electrostatic interaction promoted protein adsorption, with a large quantity of a negatively charged protein, bovine serum albumin (BSA), being adsorbed. The bactericidal efficiency of the high-graft-density polymer brush (0.45 chains nm-2) was higher than that of the low-graft-density polymer brush (0.06 chains nm-2). To investigate the mechanism of this phenomenon, we applied the dissipation change (ΔD) of QCM-D analysis. The BSA was likewise adsorbed when the brush structure was changed; however, the negative ΔD indicated that the BSA-adsorbed, high-graft-density PMTAC brush became a rigid state. In the bacteria culture media, the behaviors were the same as BSA adsorption, and the high-graft-density polymer brush was also estimated to be more rigid than the low-graft-density polymer brush. Moreover, for S. aureus adhesion after incubating in TSB, a small slope of ΔD/ΔF plots considered initial adsorption of bacteria on the high-graft-density polymer brush strongly interacted compared to that of the low-graft-density polymer brush. The scattered value of the slope of ΔD/ΔF on the high-graft-density polymer brush was considered to be due to the dead bacteria between the bacteria and the polymer brush interface. These investigations for a well-defined cationic polymer brush will contribute to the design of antibacterial surfaces.

pH-Responsive Water-Soluble Polymer Carriers for Cell-Selective Metabolic Sialylation Labeling.

Cell-surface sialic acids can be metabolically labeled and subsequently modified using bioorthogonal chemistry. The method has great potential for targeted therapy and imaging; however, distinguishing the sialylation of specific cells remains a major challenge. Here, we described a cell-selective metabolic sialylation labeling strategy based on water-soluble polymer carriers presented with pH-responsive N-azidoacetylmannosamine (ManNAz) release. 2-Methacryloyloxyethyl phosphorylcholine contributed to increased water solubility and reduced nonspecific attachment to cells. Lactobionic acid residues, used for cell selectivity, recognized overexpressed receptors on target hepatoma cells and mediated cellular internalization. ManNAz caged by acidic pH-responsive carbonated ester linkage on the polymer was released inside target cells and expressed as azido sialic acid. Additionally, longer copolymer carriers enhanced the metabolic labeling efficiency of sialylation. This approach provides a platform for cell-selective labeling of sialylation and can be applied to high-resolution bioimaging and targeted therapy.

High Dye-Loaded and Thin-Shell Fluorescent Polymeric Nanoparticles for Enhanced FRET Imaging of Protein-Specific Sialylation on the Cell Surface.

Nanoparticle-based probes have great potential for imaging specific biomolecules in signal distinguishing and amplification via Förster resonance energy transfer (FRET). Protein-specific sialylation plays key roles in the regulation of protein structure and function, as well as in various pathophysiological processes. Here, we developed a fluorescent polymeric nanoparticle with a biocompatible hydrophilic thin shell loaded with plentiful dye and used it as the donor to enhance the FRET imaging of cell surface protein-specific sialylation. The hydrophobic core decreased the self-quenching of loaded fluorescent molecules, while the hydrophilic thin shell ensured that the nanoparticles remained on the extracellular surface and guaranteed the FRET effect. Thus, the thin-shell polymeric nanoparticles enhanced the FRET imaging of protein tyrosine kinase-7-specific sialylation on the CCRF-CEM cell surface and showed high sensitivity under drug treatment. This nanoparticle has great potential for elucidating the relationship between dynamic specific glycosylation states and disease processes, as well as for the study of new cell surface imaging methodologies.

Study on polyethylene glycol cross-linker in peptide-conjugated antibody on efficiency of cell capture and release.

Cell separation is important in cell therapy and disease diagnosis. Therefore, various cell separation methods have been studied, but cellular damage and the need for pretreatment remain substantial problems. Recently, in the diagnostic field, the detachment and recovery of antibody-captured cells was actively studied to obtain more detailed information on cancer cells. Previously, we have developed a highly efficient cell separation method using microfibers. In the present study, the efficiency of cell capture and release was examined by controlling the molecular mobility of an immobilized antibody to efficiently detect cells with low expression of a marker molecule. We found that improvement in molecular mobility of antibodies enhances cell capture efficiency but decreases the detachment effectiveness of the captured cells. Therefore, the molecular mobility of antibodies can be utilized to control cell capture and release according to the level of expression of the marker molecule.

Enhanced Stability of Lipid Structures by Dip-Pen Nanolithography on Block-Type MPC Copolymer.

Biomimetic lipid membranes on solid supports have been used in a plethora of applications, including as biosensors, in research on membrane proteins or as interfaces in cell experiments. For many of these applications, structured lipid membranes, e.g., in the form of arrays with features of different functionality, are highly desired. The stability of these features on a given substrate during storage and in incubation steps is key, while at the same time the substrate ideally should also exhibit antifouling properties. Here, we describe the highly beneficial properties of a 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymer for the stability of supported lipid membrane structures generated by dip-pen nanolithography with phospholipids (L-DPN). The MPC copolymer substrates allow for more stable and higher membrane stack structures in comparison to other hydrophilic substrates, like glass or silicon oxide surfaces. The structures remain highly stable under immersion in liquid and subsequent incubation and washing steps. This allows multiplexed functionalization of lipid arrays with antibodies via microchannel cantilever spotting (µCS), without the need of orthogonal binding tags for each antibody type. The combined properties of the MPC copolymer substrate demonstrate a great potential for lipid-based biomedical sensing and diagnostic platforms.

Fabrication and assessment of an electrospun polymeric microfiber-based platform under bulk flow conditions with rapid and efficient antigen capture.

Correction for 'Fabrication and assessment of an electrospun polymeric microfiber-based platform under bulk flow conditions with rapid and efficient antigen capture' by Carlton F. O. Hoy et al., Analyst, 2018, 143, 865-873.

Fabrication and assessment of an electrospun polymeric microfiber-based platform under bulk flow conditions with rapid and efficient antigen capture.

This study investigated the fabrication and proof of concept design demonstrating rapid and highly sensitive antigen capture utilizing electrospun polystyrene (PS) microfiber mat substrates paired with vacuum pump pressurization to induce bulk flow. In comparison with conventional flat PS surfaces used for immunoassay purposes, this system optimizes the increased surface area of the electrospun polystyrene (ESPS) fiber mat substrates and the accelerated propagation of the antigen through the detection platform by using a vacuum pump to enable efficient and rapid antigen capture. The novelty of this work was demonstrated through a parametric study detailing how a fiber substrate can capture antigen sensitively and at high speeds. In terms of sensitivity, the current system is comparable to the conventionally used flat PS substrates. Additionally, the amount of antigen captured on a flat PS substrate in 60 minutes was surpassed in under 5 seconds when utilizing the ESPS-vacuum system. Three-dimensional ESPS fiber mats were then noted as a comparison between Damkohler numbers and between flat PS and ESPS-vacuum systems. The bulk flow of the ESPS-vacuum system allows for a Damkohler number of 0.37 indicating a balance between the flow rate and the reaction rate as opposed to a PS flat platform of 5.80 × 104 which illustrates a diffusion rate limited system. Finally, the overall ESPS-vacuum system was tested for its immunoassay capability. A sandwich fluorescence-based immunoassay was performed on both PS flat-diffusion and ESPS-vacuum systems. The ESPS-vacuum system indicated a wider detection range capability from 5 to 1000 ng mL-1 in comparison with the PS flat-diffusion system at 5 to 100 ng mL-1.

Positive regulation of the enzymatic activity of gastric H(+),K(+)-ATPase by sialylation of its ß-subunit.

The gastric proton pump (H(+),K(+)-ATPase) consists of a catalytic α-subunit (αHK) and a glycosylated ß-subunit (ßHK). ßHK glycosylation is essential for the apical trafficking and stability of αHK in gastric parietal cells. Here, we report the properties of sialic acids at the termini of the oligosaccharide chains of ßHK. Sialylation of ßHK was found in LLC-PK1 cells stably expressing αHK and ßHK by staining of the cells with lectin-tagged fluorescent polymeric nanoparticles. This sialylation was also confirmed by biochemical studies using sialic acid-binding lectin beads and an anti-ßHK antibody. The sialic acids of ßHK are cleaved enzymatically by neuraminidase (sialidase) and nonenzymatically by an acidic solution (pH5). Interestingly, the enzymatic activity of H(+),K(+)-ATPase was significantly decreased by cleavage of the sialic acids of ßHK. In contrast, ßHK was not sialylated in the gastric tubulovesicles prepared from the stomach of fed hogs. The H(+),K(+)-ATPase activity in these tubulovesicles was not significantly altered by neuraminidase. Importantly, the sialylation of ßHK was observed in the gastric samples prepared from the stomach of famotidine (a histamine H2 receptor antagonist)-treated rats, but not histamine (an acid secretagogue)-treated rats. The enzymatic activity of H(+),K(+)-ATPase in the samples of the famotidine-treated rats was significantly higher than in the histamine-treated rats. The effects of famotidine were weakened by neuraminidase. These results indicate that ßHK is sialylated at neutral or weakly acidic pH, but not at acidic pH, suggesting that the sialic acids of ßHK positively regulate the enzymatic activity of αHK.

Fast and selective cell isolation from blood sample by microfiber fabric system with vacuum aspiration.

Since circulating tumor cells (CTCs) are tumor cells which are found in the blood of cancer patients, CTCs are potential tumor markers, so a rapid isolation of CTCs is desirable for clinical applications. In this paper, a three-dimensional polystyrene (PS) microfiber fabric with vacuum aspiration system was developed for capturing CTCs within a short time. Various microfiber fabrics with different diameters were prepared by the electrospinning method and optimized for contact frequency with cells. Vacuum aspiration utilizing these microfiber fabrics could filter all cells within seconds without mechanical damage. The microfiber fabric with immobilized anti-EpCAM antibodies was able to specifically capture MCF-7 cells that express EpCAM on their surfaces. The specificity of the system was confirmed by monitoring the ability to isolate MCF-7 cells from a mixture containing CCRF-CEM cells that do not express EpCAM. Furthermore, the selective capture ability of the microfiber was retained even when the microfiber was exposed to the whole blood of pigs spiked with MCF-7 cells. The specific cell capture ratio of the vacuum aspiration system utilizing microfiber fabric could be improved by increasing the thickness of the microfiber fabric through electrospinning time.

Non-Osmotic Hydrogels: A Rational Strategy for Safely Degradable Hydrogels.

Hydrogels are promising materials for biomedical applications, where timely degradation is often preferred. In the conventional design, however, the cleavage of polymer networks essentially causes considerable morphological changes (i.e., degradation-induced swelling), triggering various medical complications. Herein, we report a rational strategy to suppress the degradation-induced swelling based on the synthetic control of the polymer-solvent interaction parameter (χ) of constituent polymer networks. The resultant hydrogels with an optimal χ parameter (χ37 °C ≈0.53; non-osmostic hydrogels) displayed the capability to retain their original shape and degrade without generating significant swelling pressure under physiological conditions (Π37 °C <1 kPa). This concept of the safely degradable non-osmotic hydrogel is theoretically universal, and can be exploited for other types of synthetic hydrogels in various settings.

Slope-Dependent Cell Motility Enhancements at the Walls of PEG-Hydrogel Microgroove Structures.

In recent years, research utilizing micro- and nanoscale geometries and structures on biomaterials to manipulate cellular behaviors, such as differentiation, proliferation, survival, and motility, have gained much popularity; however, how the surface microtopography of 3D objects, such as implantable devices, can affect these various cell behaviors still remains largely unknown. In this study, we discuss how the walls of microgroove topography can influence the morphology and the motility of unrestrained cells, in a different fashion from 2D line micropatterns. Here adhesive substrates made of tetra(polyethylene glycol) (tetra-PEG) hydrogels with microgroove structures or 2D line micropatterns were fabricated, and cell motility on these substrates was evaluated. Interestingly, despite being unconstrained, the cells exhibited drastically different migration behaviors at the edges of the 2D micropatterns and the walls of microgroove structures. In addition to acquiring a unilamellar morphology, the cells increased their motility by roughly 3-fold on the microgroove structures, compared with the 2D counterpart or the nonpatterned surface. Immunostaining revealed that this behavior was dependent on the alignment and the aggregation of the actin filaments, and by varying the slope of the microgroove walls, it was found that relatively upright walls are necessary for this cell morphology alterations. Further progress in this research will not only deepen our understanding of topography-assisted biological phenomena like cancer metastasis but also enable precise, topography-guided manipulation of cell motility for applications such as cancer diagnosis and cell sorting.

Lectin-tagged fluorescent polymeric nanoparticles for targeting of sialic acid on living cells.

In this study, we fabricated lectin-tagged fluorescent polymeric nanoparticles approximately 35 nm in diameter using biocompatible polymers conjugated with lectins for the purpose of detecting sialic acid on a living cell surface, which is one of the most important biomarkers for cancer diagnosis. Through cellular experiments, we successfully detected sialic acid overexpression on cancerous cells with high specificity. These fluorescent polymeric nanoparticles can be useful as a potential bioimaging probe for detecting diseased cells.

Explainable Prediction of Hydrophilic/Hydrophobic Property of Polymer Brush Surfaces by Chemical Modeling and Machine Learning.

Polymer informatics has attracted increasing attention as a specialized branch of material informatics. Hydrophilicity/hydrophobicity is one of the most important properties of interfaces involved in antifouling, self-cleaning, antifogging, oil/water separation, protein adsorption, and bioseparation. Establishing a quantitative structure-property relationship for the hydrophilicity/hydrophobicity of polymeric interfaces could significantly benefit from machine learning modeling. In this study, we aimed to construct machine learning models that could predict the static water contact angle (CA) as an indicator of hydrophilicity/hydrophobicity based on a data set of polymer brushes. The features of the polymer brush surfaces were numerically described using their grafted structures (thickness) and molecular descriptors derived from their chemical structures. We achieved accurate prediction and understanding of important parameters by employing appropriate molecular descriptors considering the Pearson correlation and machine learning models trained with nested cross-validation. The model interpretation by Shapley additive extension analysis indicated that the amount of partial polar/nonpolar structure in the molecule as well as the averaged hydrophobicity represented by MolLogP plays an important role in determining the CA. Moreover, the model can predict the CAs of polymer brushes composed of chemical structures that are not present in existing databases. The CA values of the hypothetical polymer brushes are predicted.

Preparation of cellular membrane-mimicking glycopolymer interfaces by a solvent-assisted method on QCM-D sensor chips and their molecular recognition.

Carbohydrate-based membranes that show molecular recognition ability are interesting mimics of biointerfaces. Herein, we prepared glycopolymer membranes on QCM-D sensor chips using a solvent-assisted method and investigated their interactions with a target lectin. The membrane containing the glycopolymer with a random arrangement of the carbohydrate units adsorbed more lectin than that containing the glycopolymer with an organized block of carbohydrate units.

High-Quality Three-Dimensionally Cultured Cells Using Interfaces of Diblock Copolymers Containing Different Ratios of Zwitterionic N-Oxides.

To control three-dimensional (3D) cell spheroid formation, it is well-known the surface physicochemical and mechanical properties of cell culture materials are important; however, the formation and function of 3D cells are still unclear. This study demonstrated the precise control of the formation of 3D cells and 3D cell functions using diblock copolymers containing different ratios of a zwitterionic trimethylamine N-oxide group. The diblock copolymers were composed of poly(n-butyl methacrylate) (PBMA) as the hydrophobic unit for surface coating on a cell culture dish and stabilization in water, and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) as the precursor of N-oxide. The zwitterionic N-oxide converted from 0 to 100% using PDMAEMA. The wettability and surface zeta potential varied with different ratios of N-oxide diblock copolymer-coated surfaces, and the amount of protein adsorbed in the cell culture medium decreased monotonically with increasing N-oxide ratio. 3D cell spheroid formations were observed by seeding human umbilical cord mesenchymal stem cells (hUC-MSCs) in diblock copolymer-coated flat-bottom well plates, and the N-oxide ratio was over 40%. The cells proliferated in two-dimensions (2D) and did not form spheroids when the N-oxide ratio was less than 20%. Interestingly, the expression of undifferentiated markers of hUC-MSCs was higher on surfaces that adsorbed proteins to some extent and formed 50-150 µm spheroids in the range of 40-70% of N-oxide ratio. We revealed that a moderately protein-adsorbed surface allows precise control of spheroid formation and undifferentiated 3D cells and has potential applications for high-quality spheroids in regenerative medicine and drug screening.

Microfluidic electrochemical biosensors: tools for advancing the sustainable development goals.

New technologies can help to achieve the sustainable development goals (SDGs) of the United Nations. We discuss the contribution of microfluidic electrochemical biosensors to advancing the SDGs. These sensors can be applied in various fields given their low cost, self-powering ability, environmental compatibility, ease of use, and small sample volume requirements.

Enzyme stability in polymer hydrogel-enzyme hybrid nanocarrier containing phosphorylcholine group.

Enzymes are biological catalysts with good biocompatibility and high efficiency and have been widely used in many fields, such as wastewater treatment, biosensors, and the medical industry. However, their inherently low stability under conditions of practical use limits further applications. Zwitterionic polymers possessing a pair of oppositely charged groups in their repeating units can increase protein stability because of their good biocompatibility and high water content. In this study, zwitterionic copolymer nanogels comprising poly(2-methacryloyloxyethyl phosphorylcholine (MPC)-co-methacrylic acid-N-hydroxy succinimide ester (MNHS)) (PMS) were synthesized via reversible addition-fragmentation chain-transfer polymerization (RAFT). ß-Galactosidase (ß-gal) was post-modified within zwitterionic polymer nanogels with a covalently-bound spacer and the activity was compared with that of directly immobilized ß-gal and free ß-gal. Compared with direct immobilization, covalent immobilization with a spacer could reduce the structural change of ß-gal, as confirmed by the circular dichroism spectra. Although the activity of ß-gal decreased after immobilization, the hybrids of the ß-gal immobilized nanogels, termed hybrid nanogel-enzymes, demonstrated superior stability compared to the free enzymes. The hybrid nanogel-enzymes maintained their function against inactivation by organic solvents and proteinases owing to their high water content, anti-biofouling properties, and limited mass transfer. They can also withstand protein aggregation at high temperatures and maintain their activity. Compared to direct immobilization, immobilization with a spacer resulted in a dramatic increase in the enzyme activity and a slight decrease in the stability. These results indicate that polymer nanogels containing phosphorylcholine units are promising materials for enzyme immobilization, expanding the scope of enzyme applications.

Superior antibacterial surfaces using hydrophilic, poly(MPC) and poly(mOEGMA) free chains of amphiphilic block copolymer for sustainable use.

Surface modification of electrically neutral hydrophilic polymers is one of the most promising methods for preventing biofouling and biological contamination by proteins and bacteria. Surface modification of inorganic materials such as silica-based glass can render them more durable and thus help in achieving the sustainable development goals. This study reports a novel method for the simple and effective surface modification of glass surfaces with amphiphilic block copolymers possessing the silane coupling segment composed of 3-(methacryloyloxy)propyltris (trimethylsilyloxy) silane and 3-methacryloxypropyltrimethoxysilane. The ability of hydrophilic segments composed of either 2-methacryloyloxyethyl phosphorylcholine (MPC) or poly(ethylene glycol) methyl ether methacrylate (mOEGMA) to prevent bacterial adhesion was investigated. The target block copolymers were prepared by reversible addition-fragmentation chain transfer polymerization and the monomer units of the hydrophilic segments were controlled to be either 120 or 160. The polymers were modified on the substrate by dip-coating. Contact angle measurements indicated that the block copolymer with the PMPC hydrophilic segment formed a hydrophilic surface without pre-hydration, while those with the PmOEGMA hydrophilic segment-coated surface became hydrophilic upon immersion in water. The block copolymer-coated surfaces decreased S. aureus adhesion, and a significant reduction was observed with the MPC-type block copolymer. The following surface design guidelines were thus concluded: (1) the block copolymer is superior to the random copolymer and (2) increasing the hydrophilic segment length further decreases bacterial adhesion.